@article{DelucaBermejoMoratinosGruenbichleretal.,
  author    = {Deluca, Marco and Bermejo Moratinos, Ra{\´u}l and Gr{\"u}nbichler, Hannes and Pressler, Volker and Danzer, Robert and Nickel, Klaus G.},
  title     = {Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics},
  series = {Scripta materialia},
  journal   = {Scripta materialia},
  number    = {63(2)},
  pages     = {343 -- 346},
  subject      = {Materials},
  language  = {en}
}
@article{GruenbichlerKreithBermejoMoratinosetal.,
  author    = {Gr{\"u}nbichler, Hannes and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties},
  series = {Journal of the European Ceramic Society},
  journal   = {Journal of the European Ceramic Society},
  number    = {30},
  pages     = {249 -- 254},
  subject      = {Materials},
  language  = {en}
}
@article{BermejoMoratinosGruenbichlerKreithetal.,
  author    = {Bermejo Moratinos, Ra{\´u}l and Gr{\"u}nbichler, Hannes and Kreith, Josef and Auer, Christoph},
  title     = {Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature},
  series = {Journal of the European Ceramic Society},
  journal   = {Journal of the European Ceramic Society},
  number    = {30},
  pages     = {705 -- 712},
  subject      = {Materials},
  language  = {en}
}
@article{SchwaabGruenbichlerSupancicetal.,
  author    = {Schwaab, Holger and Gr{\"u}nbichler, Hannes and Supancic, Peter and Kamlah, Marc},
  title     = {Macroscopical non-linear material model for ferroelectric materials inside a hybrid finite element formulation},
  series = {International Journal of Solids and Structures},
  journal   = {International Journal of Solids and Structures},
  number    = {49},
  pages     = {457 -- 469},
  subject      = {Ferroelectricity},
  language  = {en}
}
@article{BermejoMoratinosGruenbichlerLubeetal.,
  author    = {Bermejo Moratinos, Raul and Gr{\"u}nbichler, Hannes and Lube, Tanja and Supancic, Peter and Danzer, Robert and Sestakova, Lucie},
  title     = {Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures},
  series = {Key engineering materials},
  volume    = {2011},
  journal   = {Key engineering materials},
  number    = {Vol. 465},
  pages     = {41 -- 46},
  subject      = {Materials},
  language  = {en}
}
@article{GruenbichlerKreithBermejoMoratinosetal.,
  author    = {Gr{\"u}nbichler, Hannes and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Krautgasser, Clemens and Supancic, Peter},
  title     = {Influence of the Load Dependent Material Properties on the Performance of Multilayer Piezoelectric Actuators},
  series = {IUTAM Bookseries (24), Springer},
  volume    = {2011},
  journal   = {IUTAM Bookseries (24), Springer},
  number    = {24},
  pages     = {243 -- 253},
  subject      = {Materials},
  language  = {en}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {Cyanobacteria for PHB Bioplastics Production: A Review},
  series = {IntechOpen},
  journal   = {IntechOpen},
  pages     = {10},
  abstract  = {Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78\% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature.},
  subject      = {Bio-based Plastics},
  language  = {en}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {PHB - Bio Based and Biodegradable Replacement for PP: A Review},
  series = {Novel Techniques in Nutrition and Food Science},
  volume    = {2},
  journal   = {Novel Techniques in Nutrition and Food Science},
  number    = {2},
  pages     = {4},
  subject      = {Bio Degradable},
  language  = {en}
}
@inproceedings{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  series = {th International Conference on Smart Materials and Structures},
  booktitle = {th International Conference on Smart Materials and Structures},
  publisher = {Material Sci Eng 2018 (7)},
  subject      = {Robotics},
  language  = {en}
}
@misc{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{AburaiaLacknerGruenbichleretal.,
  author    = {Aburaia, Mohamed and Lackner, Maximilian and Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lammer, H. and Zhang, Haiguang and Wang, J. and Sapotka, J. and Janics, T. and Hailberger, M.},
  title     = {Freeform-FDM process development using natural fibre reinforced biopolymers},
  series = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK},
  booktitle = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK},
  subject      = {Freeform Printing},
  language  = {en}
}