@inproceedings{StujaPoszvekMarkletal.,
  author    = {Stuja, Kemajl and Poszvek, G{\"u}nther and Markl, Erich and Aburaia, Mohamed},
  title     = {Design and Optimization of Pumping Aggregate for Hydraulic Active Car Suspension using Software SolidWorks},
  series = {26TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  booktitle = {26TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  abstract  = {This work represents the design and performance optimization of pumping aggregate for hydraulic active car suspension systems. For solving of this task is required wide scope of interdisciplinary knowledge. The software used in this project was SolidWorks from Dassault Systemes. Using this tool is possible to analyse and optimize the flow of hydraulic fluid throw the electromotor of pumping aggregate. This papers shows among other, how to set the input parameters and constraints such as pressure and velocity, how to simulate a rotating flow of cooling fluid inside intermediate regions between stator and rotor. For approving a required lifetime of pumping aggregate a fatigue analysis was done and represented above. The verification of simulation model and mandatory validation of simulation results are made. The conclusions at the end of this work have confirmed the usage of computational fluid dynamic - software for future researches of pumping aggregates.},
  subject      = {Hydraulic},
  language  = {en}
}
@inproceedings{EngelhardtNowitzkiAburaiaMarkl,
  author    = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Markl, Erich},
  title     = {Smart Manufacturing in the Digital Factory - a Practical Case Study of an Industrie 4.0 Implementation},
  series = {EUROCAST 2017, Sixteenth International Conference on Computer Aided Systems Theory},
  booktitle = {EUROCAST 2017, Sixteenth International Conference on Computer Aided Systems Theory},
  subject      = {Smart Manufacturing},
  language  = {en}
}
@inproceedings{StujaMirlindMarkletal.,
  author    = {Stuja, Kemajl and Mirlind, Brugi and Markl, Erich and Aburaia, Mohamed},
  title     = {Lightweight Educational Scara Robot for Palletizing of USB Sticks},
  series = {Proceedings of the 27th International DAAAM Symposium 2016, DAAAM 2017},
  booktitle = {Proceedings of the 27th International DAAAM Symposium 2016, DAAAM 2017},
  subject      = {Education},
  language  = {en}
}
@inproceedings{StujaPoszvekWoelfeletal.,
  author    = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich},
  title     = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems},
  series = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  booktitle = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  isbn      = {978-3-902734-20-4},
  issn      = {1726-9679},
  subject      = {Industrial Security},
  language  = {en}
}
@inproceedings{StujaPoszvekWoelfeletal.,
  author    = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich},
  title     = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems},
  series = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation},
  booktitle = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation},
  subject      = {Saftey},
  language  = {en}
}
@misc{EngelhardtNowitzkiAburaiaMarkl,
  author    = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Markl, Erich},
  title     = {Smart Manufacturing in the Digital Factory - a Practical Case Study of an Industrie 4.0 Implementation},
  subject      = {Smart Manufacturing},
  language  = {en}
}
@article{AburaiaStujaMarkl,
  author    = {Aburaia, Mohamed and Stuja, Kemajl and Markl, Erich},
  title     = {Design and control of 4 axis additive manufactured robot using software tools},
  series = {Procedia Engineering 100},
  journal   = {Procedia Engineering 100},
  subject      = {Robotics},
  language  = {en}
}
@misc{StujaPoszvekWoelfeletal.,
  author    = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich},
  title     = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems},
  subject      = {Saftey},
  language  = {en}
}
@misc{RadingerStujaWoelfeletal.,
  author    = {Radinger, Thomas and Stuja, Kemajl and W{\"o}lfel, Walter and Markl, Erich},
  title     = {Functional Safety concept for a Handling Robot Built on Optical Systems},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{KrymPoniszewskaMarandaMarkl,
  author    = {Krym, Tomasz and Poniszewska-Maranda, Aneta and Markl, Erich},
  title     = {Automatic process of continuous integration of web application},
  series = {Intelligent Networking and Collaborative Systems 2018},
  booktitle = {Intelligent Networking and Collaborative Systems 2018},
  pages     = {11},
  abstract  = {Cloud solutions in the business are nowadays becoming more and more popular. Many companies decide to deploy their applications in the cloud or migrate them from their non-cloud based solutions. It allows them to focus on functionalities and turn over the work connected with setting up and managing an infrastructure (with its issues such as scalability or availability) to the cloud providers. This paper provides an in-depth analysis of cloud solutions in aspects of distributed business services. It is supported by a web application that is responsible for testing the provided services to supports the analysis.},
  subject      = {Software Testing},
  language  = {en}
}
@inproceedings{PoniszewskaMarandaIgnaczewskiMarkl,
  author    = {Poniszewska-Maranda, Aneta and Ignaczewski, Bartosz and Markl, Erich},
  title     = {Towards the Cloud solutions in aspects of Distributed Business Services},
  series = {Mobile Web and Intelligent Information Systems},
  booktitle = {Mobile Web and Intelligent Information Systems},
  editor    = {Younas, Muhammad and Awan, Irfan and Ghinea, George and Catalan Cid, Marisa},
  issn      = {0302-9743},
  subject      = {Cloud Solutions},
  language  = {en}
}
@misc{PoniszewskaMarandaIgnaczewskiMarkl,
  author    = {Poniszewska-Maranda, Aneta and Ignaczewski, Bartosz and Markl, Erich},
  title     = {Towards the Cloud solutions in aspects of Distributed Business Services},
  subject      = {Cloud Solutions},
  language  = {en}
}
@misc{KrymPoniszewskaMarandaMarkl,
  author    = {Krym, Tomasz and Poniszewska-Maranda, Aneta and Markl, Erich},
  title     = {Automatic process of continuous integration of web application},
  subject      = {Software Testing},
  language  = {en}
}
@misc{BucherAburaiaMarkletal.,
  author    = {Bucher, Christoph Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzales-Gutierrez, J. and Lammer, Helmuth},
  title     = {Continuous fiber reinforced freeform 3D printing},
  subject      = {Additive Manufacturing},
  language  = {en}
}
@article{MarklLackner,
  author    = {Markl, Erich and Lackner, Maximilian},
  title     = {Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {5},
  doi       = {10.3390/ma13051246},
  abstract  = {In general, composite materials are difficult to recycle. Tires belong to this class of materials. On top, one of their main constitutents, vulcanized rubber, is as elastomer, which cannot be remolten and hence is particularly challenging to put to a new use. Today, the main end-of-life routes of tires and other rubber products are landfilling, incineration in e.g., cement plants, and grinding to a fine powder, generating huge quantities and indicating a lack of sustainable recycling of this valuable material. True feedstock recycling is not feasible for complex mixtures such as tires, but devulcanization can be done to reactivate the cross-linked polymer for material recycling in novel rubber products. Devulcanization, i.e., the breaking up of sulfur bonds by chemical, thermophysical, or biological means, is a promising route that has been investigated for more than 50 years. This review article presents an update on the state-of-the art in rubber devulcanization. The article addresses established devulcanization technologies and novel processes described in the scientific and patent literatures. On the one hand, tires have become high-tech products, where the simultaneous improvement of wet traction, rolling resistance, and abrasion resistance (the so-called "magic triangle") is hard to achieve. On the other hand, recycling and sustainable end-of-life uses are becoming more and more important. It is expected that the public discussion of environmental impacts of thermoplastics will soon spill over to thermosets and elastomers. Therefore, the industry needs to develop and market solutions proactively. Every year, approximately 40 million tons of tires are discarded. Through the devulcanization of end-of-life tires (ELT), it is possible to produce new raw materials with good mechanical properties and a superior environmental footprint over virgin products. The devulcanization process has become an interesting technology that is able to support the circular economy concept.},
  subject      = {rubber devulcanization},
  language  = {en}
}
@inproceedings{LacknerMarklAburaia,
  author    = {Lackner, Maximilian and Markl, Erich and Aburaia, Mohamed},
  title     = {Cybersecurity Management for (Industrial) Internet of Things: Challenges and Opportunities},
  series = {Journal of Information Technology \& Software Engineering Keywords},
  booktitle = {Journal of Information Technology \& Software Engineering Keywords},
  subject      = {Security},
  language  = {en}
}
@inproceedings{WoeberAburaiaAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich},
  title     = {Konferenz der Mechatronik-Plattform: Autonome mechatronische Systeme},
  series = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering},
  booktitle = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering},
  subject      = {Autonom},
  language  = {en}
}
@inproceedings{BucherAburaiaMarkletal.,
  author    = {Bucher, Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzalez-Gutierrez, Joamin and Lammer, Herfried},
  title     = {Poster Symposium on ADDitive Manufacturing and Innovative Technologies},
  series = {Symposium on ADDitive Manufacturing and Innovative Technologies},
  booktitle = {Symposium on ADDitive Manufacturing and Innovative Technologies},
  subject      = {Innovative Technologies},
  language  = {en}
}
@misc{DannerederEngelhardtNowitzkiMarkletal.,
  author    = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane},
  title     = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{WoeberAburaiaAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich},
  title     = {Digital Manufacturing \& Robotics im Department Industrial Engineering},
  series = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme},
  booktitle = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme},
  subject      = {Digital Manufacturing},
  language  = {de}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {Cyanobacteria for PHB Bioplastics Production: A Review},
  series = {IntechOpen},
  journal   = {IntechOpen},
  pages     = {10},
  abstract  = {Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78\% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature.},
  subject      = {Bio-based Plastics},
  language  = {en}
}
@article{KnappLacknerMarkl,
  author    = {Knapp, Alexander and Lackner, Maximilian and Markl, Erich},
  title     = {Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning},
  series = {International Journal of Advance Engineering and Research Development},
  journal   = {International Journal of Advance Engineering and Research Development},
  issn      = {2348-4470},
  pages     = {84 -- 86},
  abstract  = {Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents.},
  subject      = {Floor cleaning},
  language  = {en}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {PHB - Bio Based and Biodegradable Replacement for PP: A Review},
  series = {Novel Techniques in Nutrition and Food Science},
  volume    = {2},
  journal   = {Novel Techniques in Nutrition and Food Science},
  number    = {2},
  pages     = {4},
  subject      = {Bio Degradable},
  language  = {en}
}
@book{deVriesMarklLackner,
  author    = {de Vries, Sytse and Markl, Erich and Lackner, Maximilian},
  title     = {Energy efficiency management in the shipping industry},
  publisher = {Lambert Academic Publishing},
  isbn      = {978 3 659 71981 3},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Transportation},
  language  = {en}
}
@inproceedings{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  series = {th International Conference on Smart Materials and Structures},
  booktitle = {th International Conference on Smart Materials and Structures},
  publisher = {Material Sci Eng 2018 (7)},
  subject      = {Robotics},
  language  = {en}
}
@misc{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  subject      = {Robotics},
  language  = {en}
}
@misc{MarklOrsolitsStojicic,
  author    = {Markl, Erich and Orsolits, Horst and Stojicic, Dario},
  title     = {Virtuelle Technologien in der Robotik},
  subject      = {Robotics},
  language  = {de}
}
@misc{LacknerKamravamaneshMarkletal.,
  author    = {Lackner, Maximilian and Kamravamanesh, Donya and Markl, Erich and Engelhardt-Nowitzki, Corinna and Herwig, Christoph},
  title     = {Optimization of process parameters to enhance Polyhydroxyalkanoate accumulation in a unicellular cyanobacterium using multivariate experimental design approach},
  subject      = {Bacteria},
  language  = {en}
}
@article{MarklLacknerSchmidetal.,
  author    = {Markl, Erich and Lackner, Maximilian and Schmid, Judith and Faast, Thomas},
  title     = {Mutual Benefits from Entrepreneurship of Non-business University Graduates for Academia and Founders},
  series = {International Academic Journal of Entrepreneurship},
  journal   = {International Academic Journal of Entrepreneurship},
  pages     = {8},
  abstract  = {There is a trend among universities to teach entrepreneurship and support startup initiatives. In this article, the state-ofthe- art in entrepreneurship higher education and university ecosystems of non-business schools is reviewed, and the example of the University of Applied Sciences Technikum Wien, Austria, and one of its startup show cases, Toolsense, is elaborated to understand critical success factors for non-business graduates as founders. The mutual benefits for universities and founders are discussed. In the case of Toolsense and the University of Applied Sciences, narrow band IoT as brought to the University by the startup. Implications on a universities' innovation and portfolio management are highlighted. Concerning startups, the importance of growth financing after initial success is elaborated.},
  subject      = {Entrepreneurship},
  language  = {en}
}
@inproceedings{DannerederEngelhardtNowitzkiMarkletal.,
  author    = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane},
  title     = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control},
  series = {Proceedings of the Austrian Robotics Workshop 2018},
  booktitle = {Proceedings of the Austrian Robotics Workshop 2018},
  subject      = {Robotics},
  language  = {en}
}
@incollection{LacknerMarklCermak,
  author    = {Lackner, Maximilian and Markl, Erich and Cermak, Corinna},
  title     = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail},
  series = {Transportation Systems Analysis and Assessment},
  booktitle = {Transportation Systems Analysis and Assessment},
  publisher      = {Fachhochschule Technikum Wien},
  abstract  = {This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed.},
  subject      = {Energy},
  language  = {en}
}
@incollection{CermakMarklLackner,
  author    = {Cermak, Corinna and Markl, Erich and Lackner, Maximilian},
  title     = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail},
  series = {Transportation},
  booktitle = {Transportation},
  publisher = {Intech Open},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Transportation},
  language  = {en}
}
@inproceedings{WoeberAburaiaAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich},
  title     = {Digital Manufacturing \& Robotics im Department Industrial Engineering},
  series = {Konferenz der Mechatronik Plattform Autonome mechatronische Systeme},
  booktitle = {Konferenz der Mechatronik Plattform Autonome mechatronische Systeme},
  pages     = {20 -- 21},
  abstract  = {Digitalisierung und Automatisierung in produzierender Industrie sind Schlagw{\"o}rter heutiger Forschungsbarbeiten am Department Industrial Engineering der Fachhochschule Technikum Wien. K{\"u}nstliche Intelligenz, vernetzte Sensorsysteme oder {\"u}bergreifende Prozessplanung erm{\"o}glichen Optimierung hinsichtlich Produktionszeit oder Fertigung von individualisierten Produkten, was zur Losgr{\"o}ße 1 f{\"u}hrt. In diesem Dokument werden Forschungst{\"a}tigkeiten des Departments Industrial Engineering im Kontext Vernetzung, Servicerobotik sowie Industrierobotik zusammengefasst.},
  subject      = {Industrial Engineering},
  language  = {de}
}
@misc{WoeberAburaiaKubingeretal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich and Aburaia, Mohamed},
  title     = {Digital Manufacturing \& Robotics im Department Industrial Engineering},
  subject      = {Industrial Engineering},
  language  = {de}
}
@inproceedings{AburaiaLacknerGruenbichleretal.,
  author    = {Aburaia, Mohamed and Lackner, Maximilian and Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lammer, H. and Zhang, Haiguang and Wang, J. and Sapotka, J. and Janics, T. and Hailberger, M.},
  title     = {Freeform-FDM process development using natural fibre reinforced biopolymers},
  series = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK},
  booktitle = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK},
  subject      = {Freeform Printing},
  language  = {en}
}
@inproceedings{DannerederPachschwoellAburaiaetal.,
  author    = {Dannereder, Florian and Pachschw{\"o}ll, Paul and Aburaia, Mohamed and Markl, Erich and Lackner, Maximilian and Engelhardt-Nowitzki, Corinna and Shooman, Diane},
  title     = {Development of a 3D-printed Bionic Hand with Muscle- and Force Control},
  series = {Austrian Robotics Workshop 2018},
  booktitle = {Austrian Robotics Workshop 2018},
  subject      = {Robotics},
  language  = {en}
}
@article{HaasMarklLackner,
  author    = {Haas, Theodor and Markl, Erich and Lackner, Maximilian},
  title     = {Innovative use of waste tyres: Noise-barriers and geoengineering},
  series = {World Journal of Advanced Engineering Technology and Sciences},
  journal   = {World Journal of Advanced Engineering Technology and Sciences},
  subject      = {Engineering},
  language  = {en}
}