@inproceedings{LacknerNovotnyZangletal.,
  author    = {Lackner, Maximilian and Novotny, Florian A. and Zangl, Sabine and Lembacher, Harald},
  title     = {Contribution of waste heat to the anthropogenic greenhouse effect},
  series = {2nd International Conference on Environmental Sustainability and Climate Change"},
  booktitle = {2nd International Conference on Environmental Sustainability and Climate Change"},
  subject      = {Sustainability},
  language  = {en}
}
@article{MarklLacknerSchmidetal.,
  author    = {Markl, Erich and Lackner, Maximilian and Schmid, Judith and Faast, Thomas},
  title     = {Mutual Benefits from Entrepreneurship of Non-business University Graduates for Academia and Founders},
  series = {International Academic Journal of Entrepreneurship},
  journal   = {International Academic Journal of Entrepreneurship},
  pages     = {8},
  abstract  = {There is a trend among universities to teach entrepreneurship and support startup initiatives. In this article, the state-ofthe- art in entrepreneurship higher education and university ecosystems of non-business schools is reviewed, and the example of the University of Applied Sciences Technikum Wien, Austria, and one of its startup show cases, Toolsense, is elaborated to understand critical success factors for non-business graduates as founders. The mutual benefits for universities and founders are discussed. In the case of Toolsense and the University of Applied Sciences, narrow band IoT as brought to the University by the startup. Implications on a universities' innovation and portfolio management are highlighted. Concerning startups, the importance of growth financing after initial success is elaborated.},
  subject      = {Entrepreneurship},
  language  = {en}
}
@inproceedings{DannerederEngelhardtNowitzkiMarkletal.,
  author    = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane},
  title     = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control},
  series = {Proceedings of the Austrian Robotics Workshop 2018},
  booktitle = {Proceedings of the Austrian Robotics Workshop 2018},
  subject      = {Robotics},
  language  = {en}
}
@book{OrsolitsLackner,
  author    = {Orsolits, Horst and Lackner, Maximilian},
  title     = {Virtual Reality und Augmented Reality in der Digitalen Produktion},
  editor    = {Lackner, Maximilian and Orsolits, Horst},
  publisher = {Springer Gabler},
  isbn      = {978-3-658-29009-2},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Virtual Reality},
  language  = {de}
}
@inproceedings{GonzalezGutierrezTreitlerSpoerketal.,
  author    = {Gonzalez-Gutierrez, Joamin and Treitler, Manuel and Spoerk, Martin and Arbeiter, Florian and Schuschnigg, Stephan and Lammer, Herfried and Lackner, Maximilian and Aburaia, Mohamed and Poszvek, G{\"u}nther and Zhang, Haiguang and Sapkota, Janak and Holzer, Clemes},
  title     = {Carbon fiber reinforced thermoplastics for material extrusion additive manufacturing},
  series = {Conference proceedings of 35th International Conference of the Polymer Processing Society},
  booktitle = {Conference proceedings of 35th International Conference of the Polymer Processing Society},
  pages     = {5},
  abstract  = {In an effort to broaden the engineering applications of material extrusion based additive manufacturing (MEAM), new materials are being developed. Adding carbon-fibers (CF) has been one strategy to increase the mechanical performance of different thermoplastics. One challenge is to determine the amount of CF needed to increase the mechanical performance without affecting the "printability" of the compounds. In this paper, different amounts (10, 15, and 20 vol.\%) of CF were added to recycled polypropylene (rPP) and polyamide 12 (PA12). A compatibilizer was used for rPP, but not for PA12. Filaments for MEAM were extruded from the different compounds and the viscosity as well as the tensile properties were measured and compared to the processed polymeric matrices. It was observed that the viscosities at the angular frequencies relevant for MEAM (100 to 200 rad/s) were not significantly different for rPP+CF compounds, but it was higher for PA12+CF compounds. As expected, the elongation at break significantly decreased with the addition of CF for all compounds. For the composites with an rPP matrix, the Young's modulus and the ultimate tensile strength (UTS) continuously increased as the CF content increased to 20 vol.\%. For PA12-based materials, the Young's modulus and the UTS increased with CF content, but adding more than 15 vol.\% did not further improve these values. Therefore, it was concluded that for PA12 the maximum amount of CF that should be added was 15 vol.\%. Using scanning electron microscopy, it was observed that the CF were homogeneously dispersed in the rPP matrix, but not so well in the PA12 matrix, with fibers being more concentrated towards the rim of the filament. Finally, filaments of rPP, rPP+20CF, PA12 and PA12+15CF were used to print complex geometries by means of MEAM, and it was observed that CF helped to reduce the warpage compared to the unfilled filaments. A potential application of this phenomenon could be the reduction of the bed temperature to develop a more energy efficient MEAM process for semi-crystalline polymers.},
  subject      = {Additive Manufacturing},
  language  = {en}
}
@article{KlamertSchmidLackner,
  author    = {Klamert-Schmid, Judith and Lackner, Maximilian},
  title     = {Arbeiten und studieren im Homeoffice},
  series = {Alle! Achtung! Das Sicherheitsmagazin der AUVA},
  journal   = {Alle! Achtung! Das Sicherheitsmagazin der AUVA},
  number    = {10/2021},
  subject      = {Home Office},
  language  = {de}
}
@incollection{LacknerMarklCermak,
  author    = {Lackner, Maximilian and Markl, Erich and Cermak, Corinna},
  title     = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail},
  series = {Transportation Systems Analysis and Assessment},
  booktitle = {Transportation Systems Analysis and Assessment},
  publisher      = {Fachhochschule Technikum Wien},
  abstract  = {This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed.},
  subject      = {Energy},
  language  = {en}
}
@incollection{CermakMarklLackner,
  author    = {Cermak, Corinna and Markl, Erich and Lackner, Maximilian},
  title     = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail},
  series = {Transportation},
  booktitle = {Transportation},
  publisher = {Intech Open},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Transportation},
  language  = {en}
}
@article{ZanglHuseticLackneretal.,
  author    = {Zangl, Sabine and Husetic, Mirza and Lackner, Maximilian and Lembacher, Harald},
  title     = {Sustainability - bringing about a value changes amongst employees},
  series = {Techniumscience},
  journal   = {Techniumscience},
  subject      = {Sustainability},
  language  = {en}
}
@inproceedings{AburaiaLacknerGruenbichleretal.,
  author    = {Aburaia, Mohamed and Lackner, Maximilian and Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lammer, H. and Zhang, Haiguang and Wang, J. and Sapotka, J. and Janics, T. and Hailberger, M.},
  title     = {Freeform-FDM process development using natural fibre reinforced biopolymers},
  series = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK},
  booktitle = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK},
  subject      = {Freeform Printing},
  language  = {en}
}
@inproceedings{DannerederPachschwoellAburaiaetal.,
  author    = {Dannereder, Florian and Pachschw{\"o}ll, Paul and Aburaia, Mohamed and Markl, Erich and Lackner, Maximilian and Engelhardt-Nowitzki, Corinna and Shooman, Diane},
  title     = {Development of a 3D-printed Bionic Hand with Muscle- and Force Control},
  series = {Austrian Robotics Workshop 2018},
  booktitle = {Austrian Robotics Workshop 2018},
  subject      = {Robotics},
  language  = {en}
}
@misc{KamravamaneshPflueglLackneretal.,
  author    = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph},
  title     = {Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714},
  subject      = {Bacteria},
  language  = {en}
}
@book{LacknerGrabowStadler,
  author    = {Lackner, Maximilian and Grabow, Wilhelm and Stadler, Philipp},
  title     = {Handbook of Online and Near-real-time Methods in Microbiology},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Microbiology},
  language  = {en}
}
@article{AaliyaSunoojSriRajkumaretal.,
  author    = {Aaliya, Basheer and Sunooj, Kappat Valiyapeediyekkal and Sri Rajkumar, Chillapalli Babu and Navaf, Muhammed and Akhila, Plachikkattu Parambil and Sudheesh, Cherakkathodi and George, Johnsy and Lackner, Maximilian},
  title     = {Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments},
  series = {Polymers},
  volume    = {13},
  journal   = {Polymers},
  number    = {3855},
  abstract  = {Talipot starch, a non-conventional starch source with a high yield (76\%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P-O-C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4\%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08\%.},
  subject      = {Talipot starch},
  language  = {en}
}
@article{HaasMarklLackner,
  author    = {Haas, Theodor and Markl, Erich and Lackner, Maximilian},
  title     = {Innovative use of waste tyres: Noise-barriers and geoengineering},
  series = {World Journal of Advanced Engineering Technology and Sciences},
  journal   = {World Journal of Advanced Engineering Technology and Sciences},
  subject      = {Engineering},
  language  = {en}
}
@misc{Lackner,
  author    = {Lackner, Maximilian},
  title     = {PBAT - A versatile bioplastics},
  subject      = {Bioplastics},
  language  = {en}
}
@article{LacknerOuattaraGharaeetal.,
  author    = {Lackner, Maximilian and Ouattara, Ibrahim and Gharae, Norouz Ali and Abolhassani, Raymond},
  title     = {Clean drinking water global scarcity: a review},
  series = {Journal of Water Science and Engineering},
  journal   = {Journal of Water Science and Engineering},
  subject      = {Water},
  language  = {en}
}
@inproceedings{Lackner,
  author    = {Lackner, Maximilian},
  title     = {Combination of Devulcanization and Reactive Extrusion for Value-Added Rubber Recycling},
  series = {Webinar on Biopolymers \& Bioplastics, Meetings International,},
  booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,},
  subject      = {Recycling},
  language  = {en}
}
@article{ZanglPingitzerLembacheretal.,
  author    = {Zangl, Sabine and Pingitzer, D. and Lembacher, Harald and Lackner, Maximilian},
  title     = {Carbon footprint reduction in households using professional services - example of laundry cleaning},
  series = {Pubtexto},
  journal   = {Pubtexto},
  subject      = {Sustainability},
  language  = {en}
}
@book{OrsolitsLackner,
  author    = {Orsolits, Horst and Lackner, Maximilian},
  title     = {Virtual Reality und Augmented Reality in der Digitalen Produktion},
  publisher = {Gabler},
  isbn      = {978-3-658-29008-5},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Virtual Reality},
  language  = {de}
}