@inproceedings{GurdetSalzbrunnKubinger, author = {Gurdet, Elisabeth and Salzbrunn, Benedikt and Kubinger, Wilfried}, title = {Empfehlungen f{\"u}r die Gestaltung von Human Machine Interfaces zur Wildtiererkennung w{\"a}hrend der Fr{\"u}hjahrsmahd}, series = {Tagungsband des 21. Arbeitswissenschaftlichen Kolloquiums}, booktitle = {Tagungsband des 21. Arbeitswissenschaftlichen Kolloquiums}, pages = {222 -- 232}, subject = {Detection}, language = {de} } @misc{GurdetSalzbrunnKubinger, author = {Gurdet, Elisabeth and Salzbrunn, Benedikt and Kubinger, Wilfried}, title = {Empfehlungen f{\"u}r die Gestaltung von Human Machine Interfaces zur Wildtiererkennung w{\"a}hrend der Fr{\"u}hjahrsmahd}, subject = {Detection}, language = {de} } @book{SchmidWagner, author = {Schmid, Judith and Wagner, Daniela}, title = {Unternehmerische Grundhaltung im Design Thinking - Eine Chance f{\"u}r den Tourismus?}, publisher = {Springer}, publisher = {Fachhochschule Technikum Wien}, subject = {Design}, language = {de} } @incollection{PeppoloniHirschlLeonhartsberger, author = {Peppoloni, Mauro and Hirschl, Alexander and Leonhartsberger, Kurt}, title = {Operational Behaviour of SWT}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer Nature}, publisher = {Fachhochschule Technikum Wien}, pages = {45 -- 56}, subject = {Wind Turbine}, language = {en} } @inproceedings{MarkoKubinger, author = {Marko, Thomas and Kubinger, Wilfried}, title = {Automatic Stereo Camera Calibration in Real-World Environments without Defined Calibration Objects}, series = {Proceedings of the 29th DAAAM International Symposium}, booktitle = {Proceedings of the 29th DAAAM International Symposium}, editor = {Katalinic, B.}, publisher = {DAAAM International}, address = {Vienna, Austria}, issn = {1726-9679}, subject = {Stereo Camera}, language = {en} } @inproceedings{FuchslocherRambausekKubingeretal., author = {Fuchslocher, Florian and Rambausek, Martin and Kubinger, Wilfried and Peschak, Bernhard}, title = {Concept and Implementation of a Tele-operated Robot for ELROB 2016}, series = {OAGM-ARW Workshop 2017}, booktitle = {OAGM-ARW Workshop 2017}, pages = {57 -- 60}, subject = {Robotics}, language = {en} } @misc{FuchslocherRambausekKubingeretal., author = {Fuchslocher, Florian and Rambausek, Martin and Kubinger, Wilfried and Peschak, Bernhard}, title = {Concept and Implementation of a Tele-operated Robot for ELROB 2016}, subject = {Robotics}, language = {en} } @inproceedings{SpulakOtrebskiKubinger, author = {Spulak, David and Otrebski, Richard and Kubinger, Wilfried}, title = {Object Tracking by Combining Supervised and Adaptive Online Learning through Sensor Fusion of Multiple Stereo Camera Systems}, series = {Proceedings of the Austrian Robotics Workshop 2015}, booktitle = {Proceedings of the Austrian Robotics Workshop 2015}, subject = {Object Tracking}, language = {en} } @inproceedings{SpulakOtrebskiKubinger, author = {Spulak, David and Otrebski, Richard and Kubinger, Wilfried}, title = {Evaluation of PCA, LDA and Fisherfaces in Appearance-based Object Detection in Thermal Infra-red Images}, series = {Procedia Engineering 100}, booktitle = {Procedia Engineering 100}, subject = {Object Detection}, language = {en} } @inproceedings{SpulakOtrebskiKubinger, author = {Spulak, David and Otrebski, Richard and Kubinger, Wilfried}, title = {A Probabilistic, Multivariate Approach for Object Recognition in Thermal Infra-Red Images}, series = {2014 International Conference on Connected Vehicles and Expo (ICCVE)}, booktitle = {2014 International Conference on Connected Vehicles and Expo (ICCVE)}, subject = {Object Recognition}, language = {en} } @misc{SpulakOtrebskiKubinger, author = {Spulak, David and Otrebski, Richard and Kubinger, Wilfried}, title = {Evaluation of PCA, LDA and Fisherfaces in Appearance-based Object Detection in Thermal Infra-red Images}, subject = {Object Detection}, language = {en} } @article{KubingerSommer, author = {Kubinger, Wilfried and Sommer, Roland}, title = {Industrie 4.0 - Auswirkungen von Digitalisierung und Internet auf den Industriestandort}, series = {e\&i Elektrotechnik und Informationstechnik}, volume = {133}, journal = {e\&i Elektrotechnik und Informationstechnik}, number = {7}, pages = {330 -- 333}, subject = {Industry 4.0}, language = {de} } @inproceedings{GujonKubinger, author = {Gujon, Philip and Kubinger, Wilfried}, title = {Analysis of Image Enhancement Methods for Outdoor-Application}, series = {Proceedings of the 27th DAAM International Symposium 2016}, booktitle = {Proceedings of the 27th DAAM International Symposium 2016}, pages = {40 -- 43}, subject = {Image Enhancement}, language = {en} } @misc{GujonKubinger, author = {Gujon, Philip and Kubinger, Wilfried}, title = {Analysis of Image Enhancement Methods for Outdoor-Application}, subject = {Image Enhancement}, language = {en} } @inproceedings{Kubinger, author = {Kubinger, Wilfried}, title = {Sensor System for Obstacle and Lane Detection for an Autonomous Vehicle}, series = {Tagungsband des 7. Fachkolloquiums f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE2010), Wien}, booktitle = {Tagungsband des 7. Fachkolloquiums f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE2010), Wien}, pages = {137 -- 140}, subject = {Sensor}, language = {en} } @inproceedings{Kubinger, author = {Kubinger, Wilfried}, title = {Co-Chair der Special Session „3D Scene Reconstruction"}, series = {52. Internationales Symposium ELMAR, Zadar (Kroatien)}, booktitle = {52. Internationales Symposium ELMAR, Zadar (Kroatien)}, subject = {3D Scene}, language = {en} } @misc{Kubinger, author = {Kubinger, Wilfried}, title = {Introduction to State Space Control Course "New Technologies"}, subject = {Space Control}, language = {de} } @inproceedings{Kubinger, author = {Kubinger, Wilfried}, title = {Analyse der Zuverl{\"a}ssigkeit von bildgebenden Sensoren}, series = {Tagungsband Tag der Mechatronik, Wien}, booktitle = {Tagungsband Tag der Mechatronik, Wien}, pages = {19 -- 20}, subject = {Sensor}, language = {de} } @incollection{Kubinger, author = {Kubinger, Wilfried}, title = {Einachs- und Mehrachsregelung}, series = {Taschenbuch Robotik - Montage - Handhabung}, booktitle = {Taschenbuch Robotik - Montage - Handhabung}, publisher = {Fachbuchverlag Leipzig im Carl Hanser Verlag}, address = {M{\"u}nchen}, publisher = {Fachhochschule Technikum Wien}, pages = {202 -- 211}, subject = {Robotics}, language = {de} } @misc{Kubinger, author = {Kubinger, Wilfried}, title = {DARPA Grand / Urban Challenge, Course "New Technologies"}, subject = {Urban Challenge}, language = {en} } @misc{Kubinger, author = {Kubinger, Wilfried}, title = {DARPA Grand / Urban Challenge}, subject = {Urban Challenge}, language = {en} } @inproceedings{AmbroschRinnerthalerKubinger, author = {Ambrosch, Roland and Rinnerthaler, Franz and Kubinger, Wilfried}, title = {Building an autonomous, mobile demonstration platform for embedded vision applications}, series = {Annals of DAAAM / Proceeding of the 17th International DAAAM Symposium "Intelligent Manufacturing \& Automation: Focus on Mechtronics and Robotics"}, booktitle = {Annals of DAAAM / Proceeding of the 17th International DAAAM Symposium "Intelligent Manufacturing \& Automation: Focus on Mechtronics and Robotics"}, isbn = {3-901509-57-7}, subject = {Robotics}, language = {en} } @inproceedings{LeonhartsbergerPremmSchidleretal., author = {Leonhartsberger, Kurt and Premm, C. and Schidler, Susanne and Werner, Andrea and Moisl, F.}, title = {Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks f{\"u}r netz- und systemdienliche Anwendungen}, series = {Tagungsband PV-Symposium 2018}, booktitle = {Tagungsband PV-Symposium 2018}, subject = {Photovoltaics}, language = {de} } @incollection{PeppoloniHirschlLeonhartsberger, author = {Peppoloni, Mauro and Hirschl, Alexander and Leonhartsberger, Kurt}, title = {Environmental Influences on SWT Vibrations and Oscillations}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer Nature}, publisher = {Fachhochschule Technikum Wien}, pages = {57 -- 78}, subject = {Wind Turbine}, language = {en} } @inproceedings{StujaPoszvekMarkletal., author = {Stuja, Kemajl and Poszvek, G{\"u}nther and Markl, Erich and Aburaia, Mohamed}, title = {Design and Optimization of Pumping Aggregate for Hydraulic Active Car Suspension using Software SolidWorks}, series = {26TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION}, booktitle = {26TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION}, abstract = {This work represents the design and performance optimization of pumping aggregate for hydraulic active car suspension systems. For solving of this task is required wide scope of interdisciplinary knowledge. The software used in this project was SolidWorks from Dassault Systemes. Using this tool is possible to analyse and optimize the flow of hydraulic fluid throw the electromotor of pumping aggregate. This papers shows among other, how to set the input parameters and constraints such as pressure and velocity, how to simulate a rotating flow of cooling fluid inside intermediate regions between stator and rotor. For approving a required lifetime of pumping aggregate a fatigue analysis was done and represented above. The verification of simulation model and mandatory validation of simulation results are made. The conclusions at the end of this work have confirmed the usage of computational fluid dynamic - software for future researches of pumping aggregates.}, subject = {Hydraulic}, language = {en} } @inproceedings{EngelhardtNowitzkiAburaia, author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed}, title = {Towards intelligent Manufacturing - Die Digitale Fabrik der FH Technikum Wien als Plattform f{\"u}r Ausbildung und angewandte Forschung}, series = {Konferenz der Mechatronik-Plattform: Smart Factory FH Technikum Wien 2016}, booktitle = {Konferenz der Mechatronik-Plattform: Smart Factory FH Technikum Wien 2016}, subject = {Manufacturing}, language = {en} } @inproceedings{SchweidlerAburaiaEngelhardtNowitzki, author = {Schweidler, Rene and Aburaia, Mohamed and Engelhardt-Nowitzki, Corinna}, title = {Design of an Industrial Robot with Six Degrees of Freedom for Educational Purposes}, series = {OAGM \& ARW JOINT WORKSHOP ON "COMPUTER VISION AND ROBOTICS}, booktitle = {OAGM \& ARW JOINT WORKSHOP ON "COMPUTER VISION AND ROBOTICS}, subject = {Industrial}, language = {en} } @inproceedings{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {SPIN.OFF - SPeicherINtegration in das B{\"u}ro(OFFice)geb{\"a}ude FutureBase}, series = {Fachtagung Energietage 2018: Netzstabilit{\"a}t der Zukunft}, booktitle = {Fachtagung Energietage 2018: Netzstabilit{\"a}t der Zukunft}, subject = {Integration}, language = {de} } @inproceedings{KomendaMalisa, author = {Komenda, Titanilla and Malisa, Viktorio}, title = {Implementation of the ECTS-barometer to illustrate course achievement using the Master degree program Mechatronics/Robotics as a model}, series = {Proceedings of the Joint International IGIP-SEFI Annual Conference 2010, At Trnava}, booktitle = {Proceedings of the Joint International IGIP-SEFI Annual Conference 2010, At Trnava}, subject = {Robotics}, language = {en} } @article{EderVoronkoDimitriadisetal., author = {Eder, Gabriele C. and Voronko, Yuliya and Dimitriadis, Simon and Kn{\"o}bl, Karl and Ujv{\´a}ri, Guszt{\´a}v and Berger, Karl A. and Halwachs, Martin and Neumaier, Lukas and Hirschl, Christina}, title = {Climate specific accelerated ageing tests and evaluation of ageing induced electrical, physical, and chemical changes}, series = {Progress in Photovoltaics: Research and Applications 2018}, journal = {Progress in Photovoltaics: Research and Applications 2018}, pages = {1 -- 16}, subject = {Photovoltaik}, language = {en} } @inproceedings{MalisaHieger, author = {Malisa, Viktorio and Hieger, Christof}, title = {Graphical Analysis about the Definition of Mechatronics}, series = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium}, booktitle = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium}, isbn = {978-3-901509-70-4}, issn = {1726-9679}, pages = {1845 -- 1847}, subject = {Mechatronic}, language = {en} } @book{Hieger, author = {Hieger, Christof}, title = {Mechatronische Integration eines bionischen Roboterarms}, publisher = {VDM Verlag Dr. M{\"u}ller}, publisher = {Fachhochschule Technikum Wien}, subject = {Robotics}, language = {de} } @article{TraussnigMalisa, author = {Traussnig, Udo and Malisa, Viktorio}, title = {Netzwerken f{\"u}r die Mechatronik}, series = {atp edition}, journal = {atp edition}, number = {12}, pages = {888 -- 890}, subject = {Mechatronic}, language = {de} } @inproceedings{HauerMalisaHiegeretal., author = {Hauer, Stefan and Malisa, Viktorio and Hieger, Christof and Stuja, Kemajl}, title = {Design and simulation of modular robot work cells}, series = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium, Vienna (Austria)}, booktitle = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium, Vienna (Austria)}, isbn = {978-3-901509-70-4}, subject = {Robotics}, language = {en} } @inproceedings{HesseMalisaHieger, author = {Hesse, Stefan and Malisa, Viktorio and Hieger, Christof}, title = {Feedback zum Taschenbuch: Robotik - Montage - Handhabung}, series = {Tagungsband des 7. Fachkolloquiums f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE), Wien}, booktitle = {Tagungsband des 7. Fachkolloquiums f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE), Wien}, isbn = {978-3-902759-00-9}, pages = {113 -- 116}, subject = {Robotics}, language = {de} } @misc{SchmidKesslerBarredyetal., author = {Schmid, Judith and Keßler, Alexander and Barredy, Celine and Frank, Hermann}, title = {Entrepreneurial Marketing in Family firms}, subject = {Marketing}, language = {en} } @article{RauerKroissKryvinskaetal., author = {Rauer, Johannes Nikolaus and Kroiss, Michael and Kryvinska, Natalia and Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed}, title = {Cross-university virtual teamwork as a means of internationalization at home}, series = {The International Journal of Management Education, Volume 19, Issue 3}, journal = {The International Journal of Management Education, Volume 19, Issue 3}, number = {Issue 3}, subject = {Virtual Teamwork}, language = {en} } @article{OtrebskiRauerEngelhardtNowitzkietal., author = {Otrebski, Richard and Rauer, Johannes and Engelhardt-Nowitzki, Corinna and Kryvinska, Natalia and Aburaia, Mohamed and Pospisil, Dominik}, title = {Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling}, series = {International Journal of Ubiquitous Systems and Pervasive Networks (JUSPN)}, journal = {International Journal of Ubiquitous Systems and Pervasive Networks (JUSPN)}, number = {Volume 12, Issue 2}, subject = {Communication Modeling}, language = {en} } @inproceedings{SchneiderZelgerLaurent, author = {Schneider, Simon and Zelger, Thomas and Laurent, Pierre}, title = {Energy Building Stock Simulation and Planning for Small Municipalities - A Web-based Urban Energy System Model for Potential Analysis and Citizen Participation}, series = {Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS}, booktitle = {Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS}, address = {Funchal, Madeira}, subject = {Energy}, language = {en} } @article{HuFengZhangetal., author = {Hu, Qingxi and Feng, Di and Zhang, Haiguang and Yao, Yuan and Aburaia, Mohamed and Lammer, Herfried}, title = {Oriented to Multi-Branched Structure Unsupported 3D Printing Method Research}, series = {Materials, vol. 13, no. 9, p. 2023, Apr. 2020}, journal = {Materials, vol. 13, no. 9, p. 2023, Apr. 2020}, subject = {Structure}, language = {en} } @article{EngelhardtNowitzkiAburaiaRauer, author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Rauer, Johannes}, title = {Research-based teaching in digital manufacturing and robotics - the Digital Factory at the UAS Technikum Wien as an exemplary case}, series = {CLF2020 TU Graz}, journal = {CLF2020 TU Graz}, subject = {Digital Manufacturing}, language = {en} } @inproceedings{OtrebskiPospisilEngelhardtNowitzkietal., author = {Otrebski, Richard and Pospisil, Dominik and Engelhardt-Nowitzki, Corinna and Kryvinska, Natalia and Aburaia, Mohamed}, title = {Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling}, series = {The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada}, booktitle = {The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada}, pages = {7}, abstract = {Cyberphysical production systems are an important part of today's manufacturing process. The ever-growing need of highly optimized, i.e. at the same time flexible and e� cient systems, requires the use of not only appropriate machines, but as well a communication framework and data model that is manufacturer independent and scalable. This paper proposes a communicationframework based on OPC UA that employs an agent-based architecture. The proposed system has been implemented and tested in the Digital Factory of the UAS Technikum Wien. It shows promising behavior within distributed manufacturing systems.}, subject = {Digital Manufacturing}, language = {en} } @inproceedings{EngelhardtNowitzkiAburaiaMarkl, author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Markl, Erich}, title = {Smart Manufacturing in the Digital Factory - a Practical Case Study of an Industrie 4.0 Implementation}, series = {EUROCAST 2017, Sixteenth International Conference on Computer Aided Systems Theory}, booktitle = {EUROCAST 2017, Sixteenth International Conference on Computer Aided Systems Theory}, subject = {Smart Manufacturing}, language = {en} } @inproceedings{StujaMirlindMarkletal., author = {Stuja, Kemajl and Mirlind, Brugi and Markl, Erich and Aburaia, Mohamed}, title = {Lightweight Educational Scara Robot for Palletizing of USB Sticks}, series = {Proceedings of the 27th International DAAAM Symposium 2016, DAAAM 2017}, booktitle = {Proceedings of the 27th International DAAAM Symposium 2016, DAAAM 2017}, subject = {Education}, language = {en} } @misc{Aburaia, author = {Aburaia, Mohamed}, title = {Digital Manufacturing}, subject = {Industry 4.0}, language = {en} } @inproceedings{StujaPoszvekWoelfeletal., author = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich}, title = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems}, series = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION}, booktitle = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION}, isbn = {978-3-902734-20-4}, issn = {1726-9679}, subject = {Industrial Security}, language = {en} } @inproceedings{PapaKaselautzkeStujaetal., author = {Papa, Maximilian and Kaselautzke, David and Stuja, Kemajl and W{\"o}lfel, Walter}, title = {Different safety certifiable concepts for mobile robots in industrial environments}, series = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation}, booktitle = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation}, subject = {Saftey}, language = {en} } @inproceedings{StujaPoszvekWoelfeletal., author = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich}, title = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems}, series = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation}, booktitle = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation}, subject = {Saftey}, language = {en} } @misc{EngelhardtNowitzkiAburaiaMarkl, author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Markl, Erich}, title = {Smart Manufacturing in the Digital Factory - a Practical Case Study of an Industrie 4.0 Implementation}, subject = {Smart Manufacturing}, language = {en} } @misc{PapaKaselautzkeStujaetal., author = {Papa, Maximilian and Kaselautzke, David and Stuja, Kemajl and W{\"o}lfel, Walter}, title = {Different safety certifiable concepts for mobile robots in industrial environments}, subject = {Saftey}, language = {en} } @article{AburaiaStujaMarkl, author = {Aburaia, Mohamed and Stuja, Kemajl and Markl, Erich}, title = {Design and control of 4 axis additive manufactured robot using software tools}, series = {Procedia Engineering 100}, journal = {Procedia Engineering 100}, subject = {Robotics}, language = {en} } @inproceedings{Aburaia, author = {Aburaia, Mohamed}, title = {A Low-cost mini Robot Manipulator for Education purpose}, series = {Proceedings Austrian Robotics Workshop 2015}, booktitle = {Proceedings Austrian Robotics Workshop 2015}, subject = {Robot}, language = {en} } @article{Aburaia, author = {Aburaia, Mohamed}, title = {Digitale Fabrik}, series = {So funktioniert Wirtschaft. Ein Sachbuch f{\"u}r Jugendliche}, journal = {So funktioniert Wirtschaft. Ein Sachbuch f{\"u}r Jugendliche}, subject = {Digital Factory}, language = {de} } @inproceedings{WernerLeonhartsbergerSchidleretal., author = {Werner, Andrea and Leonhartsberger, Kurt and Schidler, Susanne and Galhaup, Michael}, title = {Innovation durch Kompetenzerweiterung - Der Nutzen des kooperativen Innovationslehrganges "smart(D)ER" f{\"u}r Unternehmen im T{\"a}tigkeitsfeld der dezentralen erneuerbaren Energiesysteme}, series = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018}, booktitle = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018}, subject = {Wind Power}, language = {de} } @misc{LeonhartsbergerPremmSchidleretal., author = {Leonhartsberger, Kurt and Premm, C. and Schidler, Susanne and Werner, Andrea and Moisl, F.}, title = {Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks f{\"u}r netz- und systemdienliche Anwendungen}, subject = {Photovoltaics}, language = {de} } @misc{WernerBecker, author = {Werner, Andrea and Becker, Gernot}, title = {Innovation durch Kompetenzerweiterung - Der Nutzen des kooperativen Innovationslehrganges "smart(D)ER" f{\"u}r Unternehmen im T{\"a}tigkeitsfeld der dezentralen erneuerbaren Energiesysteme}, subject = {Training}, language = {de} } @misc{StujaPoszvekWoelfeletal., author = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich}, title = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems}, subject = {Saftey}, language = {en} } @misc{LeonhartsbergerIllichWerneretal., author = {Leonhartsberger, Kurt and Illich, Peter and Werner, Andrea and Schidler, Susanne}, title = {Community Storage Projects in private and commercial multi-party buildings}, subject = {Energy Storage}, language = {en} } @misc{RadingerStujaWoelfeletal., author = {Radinger, Thomas and Stuja, Kemajl and W{\"o}lfel, Walter and Markl, Erich}, title = {Functional Safety concept for a Handling Robot Built on Optical Systems}, subject = {Robotics}, language = {en} } @misc{PapaKaselautzkeRadingeretal., author = {Papa, Maximilian and Kaselautzke, David and Radinger, Thomas and Stuja, Kemajl}, title = {Development of a safety industry 4.0 production environment}, subject = {Industry 4.0}, language = {en} } @misc{Stuja, author = {Stuja, Kemajl}, title = {ABB RobotStudio: Roboter-Software und Anwendungen}, subject = {Robotics}, language = {de} } @article{KorhonenWernerKutnaretal., author = {Korhonen, Elina and Werner, Andrea and Kutnar, Andreja and Toppinen, Anne and L{\"a}htinen, Katja}, title = {Communicating forest sector sustainability: results from four European countries}, series = {Forest Products Journal}, journal = {Forest Products Journal}, abstract = {Communication is an important tool in maintaining legitimacy and acceptability of forest sector operations and activities, and expectations by the general public on the forest sector conduct in Europe are in general very high. Despite this, there is scarce research in cross-national contexts on how forest sector sustainability is communicated to the general public and what development areas can be identified in terms of communication content. This study applies a qualitative content analysis in four forestry-rich European countries (Austria, Finland, Germany, and Slovenia). The state of online communication of 61 companies and 19 industry associations was qualitatively analyzed in 2014 with a focus on eight core sustainability topics of interest that were identified via an international forest sector stakeholder feedback process. Our results show some great similarities, but also some interesting differences in terms of communication frequency and weight of hot topics across countries. The most frequently communicated area was economic contribution of forests (in Finland and Austria), followed by debate over forest conservation versus production (Germany) and the concept-added value of wood (in Slovenia). With the exception of Slovenia, the role of forests in combating global warming was emphasized more frequently within industry associations than among individual forest industry companies. Characteristically, current content of sustainability communicatio n focuses on supplying factual information. Thus, there is a need for developing more targeted and bidirectional forms of stakeholder communication in the future, emphasizing also more active use of social media channels and empowering organizations to promote interactive communication and collaborative learning.}, subject = {Forest Science}, language = {en} } @article{EttweinRohrerVanzoLangthaleretal., author = {Ettwein, Frederike and Rohrer-Vanzo, Valentina and Langthaler, Georg and Werner, Andrea and Stern, Tobias and Moser, Olivia and Leitner, Raimund and Regenfelder, Katja}, title = {Consumer's perception of high gloss furniture: instrumental gloss measurement versus visual gloss evaluation}, series = {European Journal of Wood and Wood Products}, journal = {European Journal of Wood and Wood Products}, number = {75}, pages = {1009 -- 1016}, abstract = {The overall impression of a glossy surface is an important parameter for consumer's choice of wooden products. A new gloss parameter, called gloss impression, which calculates a reflexion structure image, was developed in order to complement the measurements made by industrial glossmeters, which are highly limited in describing the visual human perception, for example the commonly used gloss value. The objective of this study is to investigate to what extent the new measurement method of surface gloss is applicable to describe human gloss perception, in other words, to validate the new method. In order to analyse the concordance of the new methodology with human perception, 113 na{\"i}ve observers had to rank the glossiness of eight series of black and white samples. The results were compared to both gloss impression and gloss value. The statistical evaluation by means of Pearson's chi-squared tests revealed that the new method has an overall better correspondence to human perception than the gloss value. For black samples, it describes human perception significantly better than the gloss value and gives better results than those which would be achieved by guessing.}, subject = {Perception}, language = {en} } @article{ListSchwarzbauerBraunetal., author = {List, Julia and Schwarzbauer, Peter and Braun, Martin and Werner, Andrea and Langthaler, Georg and Stern, Tobias}, title = {Naive wood-supply predictions: Comparing two case studies from Austria}, series = {Austrian Journal Of Forest Science}, volume = {2016}, journal = {Austrian Journal Of Forest Science}, number = {2}, pages = {87 -- 110}, abstract = {Forest owner associations act as middlemen in the cooperative marketing of timber: they are supplied with small and fluctuating quantities of timber and sell bundled amounts to industrial consumers. Knowledge of the future quantity of monthly dis-tributable timber is of particular importance for planning, but remains a subject of uncertainty. This work presents models to predict wood supply based on a simple database. Models were tested in two case-study regions, which substantially differ Seite 88 J. List, P. Schwarzbauer, M. Braun, A. Werner, G. Langthaler, T. Sternin framework conditions for timber marketing. In each of the regions in Styria and Burgenland, different model types and subtypes were superior. It was concluded that models which determine timber supply in one forest association, are only restrictedly suitable to predict timber supply in another one.}, subject = {Forest Science}, language = {en} } @inproceedings{LeonhartsbergerMeiselPichleretal., author = {Leonhartsberger, Kurt and Meisel, Markus and Pichler, Mario and Schidler, Susanne and Fotiadis, Lampros and Xypolytou, Evangelia and Werner, Andrea}, title = {System relevant Applications for Battery Storage Systems}, series = {Proceedings of the 33rd PLEA International Conference "Design to Thrive"}, booktitle = {Proceedings of the 33rd PLEA International Conference "Design to Thrive"}, pages = {4595 -- 4602}, subject = {Battery Storage}, language = {en} } @inproceedings{SchidlerWernerLeonhartsberger, author = {Schidler, Susanne and Werner, Andrea and Leonhartsberger, Kurt}, title = {Stromspeicher und {\"O}kologie - eine Frage der Definition. Zukunft der Geb{\"a}ude - digital-dezentral- {\"o}kologisch}, series = {E-Nova 2017 SCIENCE. RESEARCH. PANNONIA}, booktitle = {E-Nova 2017 SCIENCE. RESEARCH. PANNONIA}, subject = {Energy Source}, language = {de} } @misc{LeonhartsbergerMeiselPichleretal., author = {Leonhartsberger, Kurt and Meisel, Markus and Pichler, Mario and Schidler, Susanne and Fotiadis, Lampros and Xypolytou, Evangelia and Werner, Andrea}, title = {System relevant Applications for Battery Storage Systems}, subject = {Battery Storage}, language = {en} } @misc{SchidlerWernerLeonhartsberger, author = {Schidler, Susanne and Werner, Andrea and Leonhartsberger, Kurt}, title = {Stromspeicher und {\"O}kologie - Eine Frage der Definition?}, subject = {Energy Storage}, language = {de} } @misc{LeonhartsbergerSchidlerWerner, author = {Leonhartsberger, Kurt and Schidler, Susanne and Werner, Andrea}, title = {Innovation Training smart(D)ER}, subject = {Training}, language = {en} } @article{HaydnWernerStern, author = {Haydn, Annemarie and Werner, Andrea and Stern, Tobias}, title = {Assessing the potential price range for bioactive food additives from wood by using the van Wesstendorp method}, series = {Journal of the Austrian Society of Agricultural Economics}, journal = {Journal of the Austrian Society of Agricultural Economics}, number = {24}, abstract = {Plant-based food additives in functional foods can improve consumer's nutrient uptake and promote optimal health effects. Considering the ongoing development of new technologies for extracting bioactive substances the potential pricing of these substances plays a major role in assessing the overall profitability of new technologies. The study therefore assessed potential prices for not yet commercially existing bioactive substances from wood by carrying out a business-to-businesssurvey. Applying the van Westendorp method the study identified a potential price in context of varying product properties like different health claims or increasing purities. The Indifference Price of 101.5 €/kg can be considered as a guide value to assess the overall profitability. The study identified potential price ranges for such products and provided information that can be used for according pricing strategies. © 2014, OGA-Osterreichische Gesellschaft fur Agrarokonomie.}, subject = {Additives}, language = {en} } @inproceedings{SchidlerAdensamBuechsenmeisteretal., author = {Schidler, Susanne and Adensam, A. and B{\"u}chsenmeister, Richard and Jandl, Robert and Volk, B.}, title = {Nachhaltigkeitskriterien bei der Standortwahl von Biomasse(Heiz)Kraftwerken}, series = {Endbericht, Bundesforschungs- und Ausbildungszentrum f{\"u}r Wald Naturgefahren und Landschaft, Wien}, booktitle = {Endbericht, Bundesforschungs- und Ausbildungszentrum f{\"u}r Wald Naturgefahren und Landschaft, Wien}, subject = {Sustainability}, language = {de} } @inproceedings{MarkisPapaKaselautzkeetal., author = {Markis, Alexandra and Papa, Maximilian and Kaselautzke, David and Rathmair, Michael and Sattinger, Vinzenz and Brandst{\"o}tter, Mathias}, title = {Safety of Mobile Robot Systems in Industrial Applications}, series = {Proceedings of the Joint ARW \& OAGM Workshop 2019}, booktitle = {Proceedings of the Joint ARW \& OAGM Workshop 2019}, subject = {Robotics}, language = {en} } @incollection{HueblPeppoloniLeonhartsbergeretal., author = {H{\"u}bl, Stefan and Peppoloni, Mauro and Leonhartsberger, Kurt and Hirschl, Alexander}, title = {Assessment of the Impact of a Low-Rise Flat Roofed Building on Ambient Wind Conditions}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer}, address = {Trento}, publisher = {Fachhochschule Technikum Wien}, subject = {Wind Energy}, language = {en} } @incollection{HirschlPeppoloniLeonhartsberger, author = {Hirschl, Alexander and Peppoloni, Mauro and Leonhartsberger, Kurt}, title = {Evaluation of the Causes of Vibration and Oscillation in a Vertical Axis Small Wind Turbine (VASWT) and Its Reduction}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer}, address = {Trento}, publisher = {Fachhochschule Technikum Wien}, subject = {Wind Energy}, language = {en} } @book{EderMaulIllichetal., author = {Eder, Gabriele C. and Maul, Lukas and Illich, Peter and Folkerts, Wiep}, title = {Report IEA-PVPS T15-05: 2018BIPV research teams \& BIPV R\&D facilities}, isbn = {978-3-906042-74-9}, publisher = {Fachhochschule Technikum Wien}, pages = {95}, subject = {Photovoltaics}, language = {en} } @inproceedings{HirschlStorteckySchidleretal., author = {Hirschl, Alexander and Stortecky, Sebastian and Schidler, Susanne and Leonhartsberger, Kurt}, title = {Umweltbilanz geb{\"a}udemontierter Kleinwindkraftanlagen}, series = {11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019}, booktitle = {11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019}, subject = {Small Wind Plant}, language = {de} } @inproceedings{PichlerMeiselGoranovicetal., author = {Pichler, Mario and Meisel, Markus and Goranovic, Andrija and Leonhartsberger, Kurt}, title = {Decentralized Energy Networks based on Blockchain: Background, Overview and Concept Discussion}, series = {Proceeding BSCT 2018: 1st Workshop on Blockchain and Smart Contract Technologies}, booktitle = {Proceeding BSCT 2018: 1st Workshop on Blockchain and Smart Contract Technologies}, abstract = {This paper provides a snapshot of the globally ongoing decentralization of (business) relations in the energy sector. This tendency can be observed in other domains as well and is accompanied by new digital technological developments. Blockchain technology is assigned disruptive potential when it comes to realize those decentralization ideas. This hype about Blockchain is mainly company-driven without a solid academic basis yet. The authors are currently involved in several research efforts for utilizing distributed energy resources like photovoltaic systems, batteries and electric cars for the setup of energy communities and marketplaces. The paper, therefore, presents detailed investigations of background and motivations for decentralization and the building of (local) energy communities and (peer-to-peer) marketplaces for sustainable utilization of renewable energies. An overview of recent related Blockchain-based works is presented, and the current state and feasibility for the realization of the envisioned decentralized solutions are discussed. In this way, the work aimed at contributing to a research-based decision foundation for upcoming Blockchain-based decentralization efforts.}, subject = {Energy Network}, language = {en} } @techreport{ZelgerKerschbaumFigletal., author = {Zelger, Thomas and Kerschbaum, E. and Figl, H. and Huemer-Kals, V. and Gutmann, R. and Gruber, E. and Schneider, U. and Obermayer, J. and F{\"u}rst, B. and D{\"u}rk, N. and Kloiber, K. and Ornetzeder, M. and Capari, L.}, title = {Way2Smart Korneuburg: Start Up in eine sozial vertr{\"a}gliche, energieautonome Smart City}, subject = {Smart City}, language = {de} } @techreport{BergholdGangolyReisenhoferetal., author = {Berghold, Heimo and Gangoly, H. and Reisenhofer, G. and Zelger, Thomas and Heisinger, F.}, title = {Smart City Leoben: Stela - Smart Tower Enhancement Leoben Austria Endbericht}, subject = {Smart City}, language = {de} } @misc{SchmidWagner, author = {Schmid, Judith and Wagner, Daniela}, title = {Entrepreneurial Orientation in Design Thinking - A Chance for the Tourism \& Hospitality Industry?}, subject = {Design}, language = {en} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {SPIN.OFF - SPeicherINtegration in das B{\"u}ro(OFFice)geb{\"a}ude FutureBase}, subject = {Storage}, language = {de} } @inproceedings{KrymPoniszewskaMarandaMarkl, author = {Krym, Tomasz and Poniszewska-Maranda, Aneta and Markl, Erich}, title = {Automatic process of continuous integration of web application}, series = {Intelligent Networking and Collaborative Systems 2018}, booktitle = {Intelligent Networking and Collaborative Systems 2018}, pages = {11}, abstract = {Cloud solutions in the business are nowadays becoming more and more popular. Many companies decide to deploy their applications in the cloud or migrate them from their non-cloud based solutions. It allows them to focus on functionalities and turn over the work connected with setting up and managing an infrastructure (with its issues such as scalability or availability) to the cloud providers. This paper provides an in-depth analysis of cloud solutions in aspects of distributed business services. It is supported by a web application that is responsible for testing the provided services to supports the analysis.}, subject = {Software Testing}, language = {en} } @article{FairbrotherBoydLyuetal., author = {Fairbrother, Andrew and Boyd, Matthew and Lyu, Yadong and Avenet, Julien and Illich, Peter and Wang, Yu and Kempe, Michael and Dougherty, Brian and Bruckman, Laura and Gu, Xiaohong}, title = {Differential degradation patterns of photovoltaic backsheets at the array level}, series = {Solar Energy}, volume = {2018}, journal = {Solar Energy}, number = {163}, subject = {Photovoltaics}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Die Rolle von PV in lokalen und regionalen Energiesystemen und -communities}, subject = {Photovoltaics}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Die Mitwirkung von KundInnen an Batteriespeichernetzwerken}, subject = {Network}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Flexibilit{\"a}tsoptionen in Privathaushalten. Viktor Kaplan Lectures}, subject = {Flexibility}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {awarenESS - Machbarkeit von Gemeinschaftsspeichern}, subject = {Energy Storage}, language = {de} } @inproceedings{EderVoronkoDimitriadisetal., author = {Eder, C. and Voronko, Yuliya and Dimitriadis, Simon and Kn{\"o}bl, Karl and Ujv{\´a}ri, Guszt{\´a}v and Berger, Karl A. and Halwachs, Martin and Neumaier, Lukas and Hirschl, Christina}, title = {Influence of variable climatic stress conditions on performance and material degradation of PV-modules}, series = {SOPHIA PV-Reliability Workshop 2018, Ljubljana}, booktitle = {SOPHIA PV-Reliability Workshop 2018, Ljubljana}, subject = {Photovoltaics}, language = {en} } @inproceedings{EderVoronkoDimitriadisetal., author = {Eder, Gabriele C. and Voronko, Yuliya and Dimitriadis, Simon and Kn{\"o}bl, Karl and Ujv{\´a}ri, Guszt{\´a}v and Berger, Karl A. and Neumaier, Lukas}, title = {Climate Specific Accelerated Ageing Tests \& Evaluation of Ageing Induced Electrical, Physical and Chemical Changes}, series = {35th EU PVSEC 2018 5DO.7.4}, booktitle = {35th EU PVSEC 2018 5DO.7.4}, subject = {Photovoltaics}, language = {en} } @inproceedings{PoniszewskaMarandaIgnaczewskiMarkl, author = {Poniszewska-Maranda, Aneta and Ignaczewski, Bartosz and Markl, Erich}, title = {Towards the Cloud solutions in aspects of Distributed Business Services}, series = {Mobile Web and Intelligent Information Systems}, booktitle = {Mobile Web and Intelligent Information Systems}, editor = {Younas, Muhammad and Awan, Irfan and Ghinea, George and Catalan Cid, Marisa}, issn = {0302-9743}, subject = {Cloud Solutions}, language = {en} } @inproceedings{DurakbasaPoszvekBasetal., author = {Durakbasa, Numan and Poszvek, G{\"u}nther and Bas, Gokcen and Bauer, Jorge Martin}, title = {Developments in precision engineering: high precision metrology applications to improve efficiency and quality}, series = {XXI IMEKOO World Congress - Full Papers", 1 (2015)}, booktitle = {XXI IMEKOO World Congress - Full Papers", 1 (2015)}, subject = {Precision Engineering}, language = {en} } @misc{PoniszewskaMarandaIgnaczewskiMarkl, author = {Poniszewska-Maranda, Aneta and Ignaczewski, Bartosz and Markl, Erich}, title = {Towards the Cloud solutions in aspects of Distributed Business Services}, subject = {Cloud Solutions}, language = {en} } @misc{KrymPoniszewskaMarandaMarkl, author = {Krym, Tomasz and Poniszewska-Maranda, Aneta and Markl, Erich}, title = {Automatic process of continuous integration of web application}, subject = {Software Testing}, language = {en} } @techreport{BiermayrDissauerEberletal., author = {Biermayr, Peter and Dißauer, Christa and Eberl, Manuela and Enigl, Monika and Fechner, Hubert and Leonhartsberger, Kurt and Maringer, Florian and Moidl, Stefan and Schmidl, Christoph and Strasser, Christoph and Weiss, Werner and Wonisch, Patrick and Wopienka, Elisabeth}, title = {Innovative Energietechnologien in {\"O}sterreich - Marktentwicklung 2016}, organization = {Bundesministerium f{\"u}r Verkehr, Innovation und Technologie}, subject = {Energy Technologies}, language = {de} } @book{HuemerKalsZelgerLeiboldetal., author = {Huemer-Kals, V. and Zelger, Thomas and Leibold, Jens and Fellner, M. and Kleboth, Andreas and Granzow, I. and Storch, A. and Schieder, W. and Fleischhacker, A.}, title = {Smart City MIKROQUARTIERE - Energie- und lebensqualit{\"a}tsoptimierte Planung und Modernisierung von Smart City-Quartieren}, publisher = {Fachhochschule Technikum Wien}, subject = {Smart City}, language = {de} } @inproceedings{LeonhartsbergerHirschlPeppoloni, author = {Leonhartsberger, Kurt and Hirschl, Alexander and Peppoloni, Mauro}, title = {Evaluierung des Direktnutzungsanteils von Kleinwindenergieanlagen (KWEA) f{\"u}r unterschiedliche Standorte, Anlagen und Verbrauchergruppen}, series = {e-nova 2017: Zukunft der Geb{\"a}ude digital - dezentral - {\"o}kologisch}, booktitle = {e-nova 2017: Zukunft der Geb{\"a}ude digital - dezentral - {\"o}kologisch}, subject = {Wind Power}, language = {de} } @inproceedings{PapaKaselautzkeStujaetal., author = {Papa, Maximilian and Kaselautzke, David and Stuja, Kemajl and W{\"o}lfel, Walter}, title = {Different safety certifiable concepts for mobile robots in industrial environments}, series = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION}, booktitle = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION}, subject = {Mobile Robot}, language = {en} } @misc{LeiboldZelger, author = {Leibold, Jens and Zelger, Thomas}, title = {Projekt SC- Mikroquartiere - Modellierung verschiedener Nachverdichtungsszenarien und Optimierung bez{\"u}glich erneuerbarer Energieversorgung und der Lebensqualit{\"a}t der NutzerInnen}, subject = {Renewable Energy}, language = {de} } @inproceedings{LeonhartsbergerPeppoloniSchidler, author = {Leonhartsberger, Kurt and Peppoloni, Mauro and Schidler, Susanne}, title = {Absch{\"a}tzung des Potenzials dezentraler PV-Heimspeichersysteme zum Ausgleich von Fahrplanabweichungen}, series = {10. Energiewirtschaftstagung an der TU Wien}, booktitle = {10. Energiewirtschaftstagung an der TU Wien}, subject = {Photovoltaics}, language = {de} } @misc{Schidler, author = {Schidler, Susanne}, title = {Green Jobs und der Stellenwert gr{\"u}ner Qualifizierungen in {\"O}sterreich}, subject = {Training}, language = {de} } @misc{ZelgerLeiboldHuemerKals, author = {Zelger, Thomas and Leibold, Jens and Huemer-Kals, V.}, title = {Smart City Micro Quarters}, subject = {Smart City}, language = {en} } @misc{EderKnoeblMauletal., author = {Eder, Gabriele C. and Kn{\"o}bl, Karl and Maul, Lukas and Berger, Karl}, title = {Designed BIPV-elements with printed front-glass: Simulation and experimental evaluation of the effect of printing on the electrical performance}, subject = {Photovoltaics}, language = {en} } @misc{FotiadisMeiselXypolytouetal., author = {Fotiadis, Lampros and Meisel, Markus and Xypolytou, Evangelia and Leonhartsberger, Kurt and Peppoloni, Mauro and Maul, Lukas}, title = {Predicting Energy Demands of Buildings: Office Building Case Study}, subject = {Buildings}, language = {en} } @misc{EderGrillbergerVoronkoetal., author = {Eder, Gabriele C. and Grillberger, Paul and Voronko, Yuliya and Kn{\"o}bl, Karl}, title = {UV-Fluorescence measurements as tool for the detection of degradation effects in PV-modules}, subject = {Photovoltaics}, language = {en} } @misc{LeonhartsbergerPeppoloniSchidler, author = {Leonhartsberger, Kurt and Peppoloni, Mauro and Schidler, Susanne}, title = {Absch{\"a}tzung des Potenzials dezentraler PV-Heimspeichersysteme zum Ausgleich von Fahrplanabweichungen}, subject = {Photovoltaics}, language = {de} } @misc{MoislLettnerLeonhartsberger, author = {Moisl, Fabian and Lettner, Georg and Leonhartsberger, Kurt}, title = {MBS+ | Entwicklung eines dezentral organisierten Kleinspeicher-Netzwerks zum Ausgleich von Fahrplanabweichungen}, subject = {Energy Storage}, language = {de} } @misc{EderGabrieleKnoebletal., author = {Eder, C. and Gabriele, C. and Kn{\"o}bl, Karl and Maul, Lukas and Aichinger, Martin and Peharz, Gerhard and Nemitz, Wolfgang and Berger, Karl A.}, title = {Designed BIPV-elements with printed front-glass: Simulation und experimental evaluation of the effect of printing on the electrical performance}, series = {33th PV-SEC, Amsterdam}, journal = {33th PV-SEC, Amsterdam}, subject = {Photovoltaics}, language = {en} } @inproceedings{MoislPichlerChasparisetal., author = {Moisl, Fabian and Pichler, Mario and Chasparis, Georgios C. and Leonhartsberger, Kurt and Lettner, Georg}, title = {Development of a Decentralized Small Battery Energy Storage Network to Compensate for Schedule Deviations}, series = {NEIS 2017: Conference on Sustainable Energy Supply and Energy Storage Systems}, booktitle = {NEIS 2017: Conference on Sustainable Energy Supply and Energy Storage Systems}, subject = {Battery Storage}, language = {en} } @misc{HirschlLeonhartsbergerPeppoloni, author = {Hirschl, Alexander and Leonhartsberger, Kurt and Peppoloni, Mauro}, title = {Evaluierung des Direktnutzungsanteils von Kleinwindenergieanlagen (KWEA)}, subject = {Small Wind Plant}, language = {de} } @misc{HirschlPeppoloniLeonhartsberger, author = {Hirschl, Alexander and Peppoloni, Mauro and Leonhartsberger, Kurt}, title = {Environmental Influences on SWT - Vibrations and Oscillations}, subject = {Small Wind Plant}, language = {en} } @misc{Hirschl, author = {Hirschl, Alexander}, title = {Evaluation of the influencing quantities of oscillations and vibrations of small-wind-turbines (SWT) and its reduction}, subject = {Small Wind Plant}, language = {en} } @misc{PeppoloniHirschlLeonhartsberger, author = {Peppoloni, Mauro and Hirschl, Alexander and Leonhartsberger, Kurt}, title = {Operational behaviour of building mounted small wind turbines}, subject = {Small Wind Plant}, language = {en} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Analyse des Potentials dezentraler PV-Heimspeichersysteme zum Ausgleich von Fahrplanabweichungen}, subject = {Photovoltaics}, language = {de} } @misc{Hirschl, author = {Hirschl, Alexander}, title = {Evaluation of the self-consumpation rate of small wind turbines (SWT)}, subject = {Small Wind Plant}, language = {en} } @inproceedings{EderGabrieleKnoebletal., author = {Eder, C. and Gabriele, C. and Kn{\"o}bl, Karl and Maul, Lukas and Aichinger, Martin and Peharz, Gerhard and Nemitz, Wolfgang and Berger, Karl A.}, title = {Designed BIPV-elements with printed front-glass: Simulation und experimental evaluation of the effect of printing on the electrical performance}, series = {Advanced Building Skins, Bern ISBN: 978-3-9524883-1-7}, booktitle = {Advanced Building Skins, Bern ISBN: 978-3-9524883-1-7}, pages = {1295 -- 1303}, subject = {Photovoltaics}, language = {en} } @inproceedings{EderGrillbergerVoronkoetal., author = {Eder, Gabriele C. and Grillberger, Paul and Voronko, Yuliya and Kubitschek, Bernhard and Kn{\"o}bl, Karl}, title = {UV-Fluorescence measurements as tool for the detection of degradation effects in PV-modules}, series = {Proceedings of the European Weathering Symposium EWS}, booktitle = {Proceedings of the European Weathering Symposium EWS}, organization = {Gesellschaft f{\"u}r Umweltsimulation e.V. GUS}, subject = {Photovoltaics}, language = {en} } @article{MolinSchneiderRohdinetal., author = {Molin, Andreas and Schneider, Simon and Rohdin, Patrik and Moshfegh, Bahram}, title = {Assessing a regional building applied PV potential - Spatial and dynamic analysis of supply and load matching}, series = {Renewable Energy 91}, volume = {2016}, journal = {Renewable Energy 91}, number = {91}, pages = {261 -- 274}, subject = {Renewable Energy}, language = {en} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Speicherrevolution managen: Wie k{\"o}nnen private Kleinspeicher ins Stromsystem integriert werden?}, subject = {Energy Storage}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Flexibilit{\"a}tsoptionen von Kleinspeichern: M{\"o}glichkeiten, Kundenwunsch und Wirtschaftlichkeit}, subject = {Energy Storage}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Kleinwindkraft in {\"O}sterreich - Status Quo und Entwicklungspotential}, subject = {Small Wind Plant}, language = {de} } @misc{Peppoloni, author = {Peppoloni, Mauro}, title = {Ursache und Wirkung - Forschung als Schl{\"u}ssel zum Erfolg!}, subject = {Wind Power}, language = {de} } @misc{Fechner, author = {Fechner, Hubert}, title = {Multitalente Speicher - Aktuelle Entwicklungen bei Energiespeichern}, subject = {Energy Storage}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Small Wind Power in Austria}, subject = {Small Wind Plant}, language = {en} } @inproceedings{SchoenySchidler, author = {Sch{\"o}ny, Michael and Schidler, Susanne}, title = {eNNOVATION - Kompetenzerweiterung im Bereich der smarten Energiespeichertechnologien/-systeme: Innovationen \& Know-How-Transfer}, series = {Proceedings des Forschungsforum 2016 der {\"o}sterreichischen Fachhochschulen}, booktitle = {Proceedings des Forschungsforum 2016 der {\"o}sterreichischen Fachhochschulen}, pages = {7}, subject = {Energy Storage}, language = {de} } @misc{SchoenySchidler, author = {Sch{\"o}ny, Michael and Schidler, Susanne}, title = {eNNOVATION - Kompetenzerweiterung im Bereich der smarten Energiespeichertechnologien/-systeme: Innovationen \& Know-How-Transfer}, subject = {Energy Storage}, language = {de} } @inproceedings{LeonhartsbergerPeppoloniSchidler, author = {Leonhartsberger, Kurt and Peppoloni, Mauro and Schidler, Susanne}, title = {Dezentrale Solarstromspeicher - Gef{\"o}rderter sinnvoller Beitrag zur Energiewende?}, series = {Proceedings des Internationalen Kongresses e-nova 2016}, booktitle = {Proceedings des Internationalen Kongresses e-nova 2016}, subject = {Solar Power}, language = {de} } @misc{LeonhartsbergerPeppoloniSchidler, author = {Leonhartsberger, Kurt and Peppoloni, Mauro and Schidler, Susanne}, title = {Dezentrale Solarstromspeicher - Gef{\"o}rderter sinnvoller Beitrag zur Energiewende?}, subject = {Solar Power}, language = {de} } @misc{PeppoloniLeonhartsberger, author = {Peppoloni, Mauro and Leonhartsberger, Kurt}, title = {Environmental Influences on SWT - Vibrations}, subject = {Small Wind Plant}, language = {en} } @inproceedings{PeppoloniHirschlLeonhartsberger, author = {Peppoloni, Mauro and Hirschl, Alexander and Leonhartsberger, Kurt}, title = {Messtechnische Evaluierung der Umweltwirkungen von Kleinwindenergieanlagen - Vibrationen und Schwingungen}, series = {Proceedings des Internationalen Kongresses e-nova 2016}, booktitle = {Proceedings des Internationalen Kongresses e-nova 2016}, subject = {Wind Power}, language = {de} } @misc{PeppoloniHirschlLeonhartsberger, author = {Peppoloni, Mauro and Hirschl, Alexander and Leonhartsberger, Kurt}, title = {Messtechnische Evaluierung der Umweltwirkungen von Kleinwindenergieanlagen - Vibrationen und Schwingungen}, subject = {Wind Power}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {MBS+ | Entwicklung eines dezentral organisierten Kleinspeicher-Netzwerks zum Ausgleich von Fahrplanabweichungen}, subject = {Energy Storage}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Ausgleich von Fahrplanabweichungen einer Bilanzgruppe durch dezentrale Erzeuger und Speichersysteme}, subject = {Energy Storage}, language = {de} } @misc{Fechner, author = {Fechner, Hubert}, title = {Energiewende - Vision f{\"u}r Energieverbrauch und Energieeffizienz in KMUs}, subject = {Energy Transition}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Austrian R\&D activities in the field of small wind power}, subject = {Small Wind Plant}, language = {en} } @misc{Hirschl, author = {Hirschl, Alexander}, title = {Schwingungen bei Kleinwindanlagen}, subject = {Small Wind Plant}, language = {de} } @misc{Peppoloni, author = {Peppoloni, Mauro}, title = {Innovative Technologien}, subject = {Small Wind Plant}, language = {de} } @misc{AichingerMaulKnoebletal., author = {Aichinger, Martin and Maul, Lukas and Kn{\"o}bl, Karl and Peharz, Gerhard and Nemitz, Wolfgang and Eder, Gabriele C. and Berger, Karl A.}, title = {Farbgestaltung von BIPV-Elementen durch Bedruckung der Front-Gl{\"a}ser : Simulation und Messung des Einflusses des Bedruckungsgrades}, subject = {Photovoltaics}, language = {de} } @inproceedings{EderVoronkoKubitscheketal., author = {Eder, Gabriele C. and Voronko, Yuliya and Kubitschek, Bernhard and Kn{\"o}bl, Karl}, title = {Fluorescence Spectroscopy and Imaging on aged polymeric PV Encapsulantes}, series = {20th European Symposium on Polymer Sprectroscopy 09/2016 Dresden DOI: 10.13140/RG.2.2.20827.36648}, booktitle = {20th European Symposium on Polymer Sprectroscopy 09/2016 Dresden DOI: 10.13140/RG.2.2.20827.36648}, subject = {Photovoltaics}, language = {en} } @misc{MaulKnoebl, author = {Maul, Lukas and Kn{\"o}bl, Karl}, title = {Bauwerksintegrierte Photovoltaik "IEA PVPS Task 15 - Enabling Framework for the Acceleration of BIPV - Die Photovoltaik als Element unserer bebauten Umwelt"}, subject = {Photovoltaics}, language = {de} } @inproceedings{EderVoronkoKubitscheketal., author = {Eder, Gabriele C. and Voronko, Yuliya and Kubitschek, Bernhard and Kn{\"o}bl, Karl}, title = {Fluorescence Spectroscopy and Imaging on aged polymeric PV Encapsulantes}, series = {Poster - {\"O}sterreichische PV-Tagung Villach 11/2016}, booktitle = {Poster - {\"O}sterreichische PV-Tagung Villach 11/2016}, subject = {Photovoltaics}, language = {en} } @misc{Fechner, author = {Fechner, Hubert}, title = {Aktuelle Windkraftentwicklungen aus dem Blickwinkel der Wissenschaft}, subject = {Wind Power}, language = {en} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Urbane Windenergie - Chancen und Herausforderungen}, subject = {Wind Power}, language = {de} } @misc{Fechner, author = {Fechner, Hubert}, title = {Photovoltaik Technologie-Roadmap {\"O}sterreich}, subject = {Photovoltaics}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Kleinwindkraft in {\"O}sterreich}, subject = {Small Wind Plant}, language = {de} } @misc{Illich, author = {Illich, Peter}, title = {IEA PVPS Task 15}, subject = {Photovoltaics}, language = {de} } @inproceedings{LeonhartsbergerSchidlerTeppneretal., author = {Leonhartsberger, Kurt and Schidler, Susanne and Teppner, Renate and Auer, Markus and Baumann-Stanzer, Kathrin}, title = {Urbane Windenergie - Chancen und Herausforderungen}, series = {Proceedings of Internationaler Kongress e-nova 2015 - Nachhaltige Geb{\"a}ude}, booktitle = {Proceedings of Internationaler Kongress e-nova 2015 - Nachhaltige Geb{\"a}ude}, subject = {Wind Power}, language = {de} } @misc{LeonhartsbergerMaul, author = {Leonhartsberger, Kurt and Maul, Lukas}, title = {Energieversorger als Backup Provider? Erkenntnisse aus aktuellen internationalen Speicher-Studien. Smart Grids Week, 13. Mai 2016, Linz}, subject = {Smart Grids}, language = {de} } @misc{LeonhartsbergerSchidlerTeppneretal., author = {Leonhartsberger, Kurt and Schidler, Susanne and Teppner, Renate and Auer, Markus and Baumann-Stanzer, Kathrin}, title = {Urbane Windenergie - Chancen und Herausforderungen.}, subject = {Wind Power}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Small Wind Power in Austria. World Summit for Small Wind - New Opportunities for Small Wind: The Global Shift Towards 100\% Renewables,}, subject = {Wind Power}, language = {en} } @misc{Maul, author = {Maul, Lukas}, title = {Ergebnisse der Evaluierungsstudie Salzburg: Stellschrauben f{\"u}r die Qulit{\"a}tsverbesserung von Energieausweisen}, subject = {Energy}, language = {de} } @techreport{LeonhartsbergerPeppoloni, author = {Leonhartsberger, Kurt and Peppoloni, Mauro}, title = {Small Wind Power in Austria}, organization = {WWEA}, subject = {Wind Power}, language = {en} } @misc{Maul, author = {Maul, Lukas}, title = {Bauwerksintegrierte Photovoltaik - Technologie, Entwicklung, Herausforderung}, subject = {Photovoltaics}, language = {de} } @misc{Schidler, author = {Schidler, Susanne}, title = {BIOconSOLAR - Ein Nachhaltigkeitsassessment}, subject = {Sustainability}, language = {de} } @misc{DurakbasaPoszvekGokcenetal., author = {Durakbasa, Numan and Poszvek, G{\"u}nther and Gokcen, Bas and Bauer, Jorge Martin}, title = {Developments in precision engineering: high precision metrology applications to improve efficiency and quality}, subject = {Precision Engineering}, language = {en} } @article{FechnerMaul, author = {Fechner, Hubert and Maul, Lukas}, title = {Wie im Jahr 2025 zwei Millionen Menschen in Wien leben werden - {\"U}berlegungen zum Geb{\"a}ude der Zukunft}, series = {Zukunft Stadt. Wirtschaftspolitische Visionen f{\"u}r die urbanen Zentren von morgen}, journal = {Zukunft Stadt. Wirtschaftspolitische Visionen f{\"u}r die urbanen Zentren von morgen}, subject = {Vienna}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Kleinwindkraftanlagen Qualit{\"a}tssicherung, Netzeinbindung und Standortbewertung}, subject = {Wind Power}, language = {de} } @inproceedings{GrotscharSchwaiger, author = {Grotschar, Mario and Schwaiger, Robert}, title = {Gesture control for an unmanned ground vehicle}, series = {Proceedings of the Austrian Robotics Workshop 2015}, booktitle = {Proceedings of the Austrian Robotics Workshop 2015}, subject = {Gesture Control}, language = {en} } @article{LeonhartsbergerPeppoloni, author = {Leonhartsberger, Kurt and Peppoloni, Mauro}, title = {Small Wind Power in Austria}, series = {World Wind Energy Association Wind Bulletin}, journal = {World Wind Energy Association Wind Bulletin}, subject = {Wind Power}, language = {en} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Erfahrungen mit Normen und Standards im Bereich Kleinwindkraft.}, subject = {Wind Power}, language = {de} } @misc{LeonhartsbergerNenning, author = {Leonhartsberger, Kurt and Nenning, Thomas}, title = {Kleinwindkraft in {\"O}sterreich}, subject = {Wind Power}, language = {de} } @misc{GrotscharSchwaiger, author = {Grotschar, Mario and Schwaiger, Robert}, title = {Gesture control for an unmanned ground vehicle}, subject = {Gesture Control}, language = {en} } @misc{FechnerLeonhartsberger, author = {Fechner, Hubert and Leonhartsberger, Kurt}, title = {IEA Aktivit{\"a}ten im Bereich der Integration von PV und Wind in die {\"o}ffentlichen Stromnetze}, subject = {Smart Grids}, language = {de} } @techreport{LeonhartsbergerRenz, author = {Leonhartsberger, Kurt and Renz, Kathrin}, title = {Kleinwindkraftreport {\"O}sterreich}, subject = {Small Wind Plant}, language = {de} } @misc{Fechner, author = {Fechner, Hubert}, title = {Photovoltaik und Wind ver{\"a}ndern unser Energiesystem}, subject = {Photovoltaics}, language = {de} } @techreport{Fechner, author = {Fechner, Hubert}, title = {Photovoltaik Technologie-Roadmap f{\"u}r {\"O}sterreich}, subject = {Photovoltaics}, language = {de} } @techreport{FechnerLeonhartsberger, author = {Fechner, Hubert and Leonhartsberger, Kurt}, title = {Berichtsteil Photovoltaik}, subject = {Photovoltaics}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Chancen und Herausforderungen Urbaner Windenergie}, subject = {Wind Power}, language = {en} } @misc{Fechner, author = {Fechner, Hubert}, title = {The Smart Grid Innovation Process in Austria}, subject = {Smart Grids}, language = {en} } @misc{Knoebl, author = {Kn{\"o}bl, Karl}, title = {Smart Grid Research Infrastructures in Austria}, subject = {Smart Grids}, language = {en} } @book{Knoebl, author = {Kn{\"o}bl, Karl}, title = {Erneuerbare Energie aus Photovoltaikanlagen: Technische, organisatorische und rechtliche Herausforderungen bei vermehrter Integration in das elektrische Verteilnetz}, publisher = {Fachhochschule Technikum Wien}, subject = {Photovoltaics}, language = {de} } @techreport{BiermayrEhrigWeissetal., author = {Biermayr, Peter and Ehrig, Rita and Weiss, Werner and Pr{\"u}ggler, Natalie and Fechner, Hubert}, title = {Innovative Energietechnologien in {\"O}sterreich - Marktentwicklung 2010}, subject = {Energy Technology}, language = {de} } @article{PruegglerPruegglerWirl, author = {Pr{\"u}ggler, Natalie and Pr{\"u}ggler, Wolfgang and Wirl, Franz}, title = {Storage and Demand Side Management as power generator's strategic instruments to influence demand and prices}, series = {Energy}, journal = {Energy}, number = {Vol. 36}, pages = {6308 -- 6317}, subject = {Energy}, language = {en} } @inproceedings{GhaemiSchneider, author = {Ghaemi, Sara and Schneider, Simon}, title = {Potential analysis of residential Demand Response using GridLAB-D}, series = {IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society}, booktitle = {IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society}, pages = {8039 -- 8045}, subject = {Potential Analysis}, language = {en} } @misc{Prueggler, author = {Pr{\"u}ggler, Natalie}, title = {ECONOMIC POTENTIAL OF DEMAND RESPONSE AT HOUSEHOLD LEVEL - ARE CENTRAL-EUROPEAN MARKET CONDITIONS SUFFICIENT?}, subject = {Market}, language = {de} } @inproceedings{GrotscharKraupp, author = {Grotschar, Mario and Kraupp, Michael}, title = {Augmenting a mobile Austrobotics-Platform with sensors for USAR}, series = {Proceedings of the Austrian Robotics Workshop 2014}, booktitle = {Proceedings of the Austrian Robotics Workshop 2014}, subject = {Austrobotics-Platform}, language = {de} } @article{PruegglerBremberger, author = {Pr{\"u}ggler, Natalie and Bremberger, Christoph}, title = {Grid regulation in Austria: smart grids incentives or disincentives?}, series = {E \& I ELEKTROTECHNIK UND INFORMATIONSTECHNIK}, journal = {E \& I ELEKTROTECHNIK UND INFORMATIONSTECHNIK}, number = {Vol 128, 10}, pages = {336 -- 341}, subject = {Smart Grids}, language = {en} } @misc{LeonhartsbergerNenning, author = {Leonhartsberger, Kurt and Nenning, Thomas}, title = {Speichersysteme - Welcher Speicher f{\"u}r welches Einsatzgebiet}, subject = {Energy Storage}, language = {de} } @misc{GrotscharKraupp, author = {Grotschar, Mario and Kraupp, Michael}, title = {Augmenting a mobile Austrobotics-Platform with sensors for USAR}, subject = {Austrobotics-Platform}, language = {en} } @article{SchidlerAdensamDaRocha, author = {Schidler, Susanne and Adensam, Heidi and Da Rocha, K.}, title = {Berufliche Qualifizierung im Umweltsektor mit Schwerpunkt Erneuerbare Energien / Neue Energietechnologien unter antizipierender Ber{\"u}cksichtigung des Nationalen Qualifikationsrahmens (NQR). Schwerpunkt: Integration von Nachhaltigkeitsaspekten}, series = {AMS Foschungsnetz / AMS INFO 160 / Arbeitsmarktservice {\"O}sterreich}, journal = {AMS Foschungsnetz / AMS INFO 160 / Arbeitsmarktservice {\"O}sterreich}, subject = {Professional Qualification}, language = {de} } @article{DelucaBermejoMoratinosGruenbichleretal., author = {Deluca, Marco and Bermejo Moratinos, Ra{\´u}l and Gr{\"u}nbichler, Hannes and Pressler, Volker and Danzer, Robert and Nickel, Klaus G.}, title = {Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics}, series = {Scripta materialia}, journal = {Scripta materialia}, number = {63(2)}, pages = {343 -- 346}, subject = {Materials}, language = {en} } @inproceedings{StifterSchidlerKathanetal., author = {Stifter, Matthias and Schidler, Susanne and Kathan, Johannes and Adensam, Heidi and Rimpler, H. and Greger, Dieter}, title = {Photovoltaik-Vanadium Redox Flow Speichersysteme zur Stabilisierung von Niederspannungsverteilnetzen und Analyse ihrer Nachhaltigkeit}, series = {Proceedings of EnInnov, Graz ({\"O}sterreich)}, booktitle = {Proceedings of EnInnov, Graz ({\"O}sterreich)}, subject = {Photovoltaics}, language = {de} } @article{SchidlerAdensamDaRocha, author = {Schidler, Susanne and Adensam, Heidi and Da Rocha, K.}, title = {Zur Integration von Nachhaltigkeitsaspekten bei beruflichen Qualifizierungsmaßnahmen im Umweltsektor. Ergebnisse einer aktuellen Studie des AMS {\"O}sterreich}, series = {AMS info / Arbeitsmarktservice {\"O}sterreich}, journal = {AMS info / Arbeitsmarktservice {\"O}sterreich}, subject = {Professional Qualification}, language = {de} } @inproceedings{MachartPaulesichSchidler, author = {Machart, J{\"u}rgen and Paulesich, Reinhard F. and Schidler, Susanne}, title = {Nachhaltigkeitstechnologien und Risikokapital, EASEY Venture Capital Transfer}, series = {Berichte aus Energie- und Umweltforschung, BMVIT, Wien}, booktitle = {Berichte aus Energie- und Umweltforschung, BMVIT, Wien}, subject = {Sustainability}, language = {en} } @misc{GeleyStuerSchidleretal., author = {Geley, R. and Stuer, N. and Schidler, Susanne and Franz, Peter}, title = {Nachhaltige Biomassenutzung in Heizkraftwerken}, series = {Mitteleurop{\"a}ische Biomassekonferenz, Graz}, journal = {Mitteleurop{\"a}ische Biomassekonferenz, Graz}, subject = {Biomass}, language = {de} } @article{Prueggler, author = {Pr{\"u}ggler, Natalie}, title = {A cost-based approach to evaluate future grid structure options}, series = {International Journal of Distributed Energy Resources}, journal = {International Journal of Distributed Energy Resources}, subject = {Grid}, language = {en} } @incollection{Ambrosch, author = {Ambrosch, Roland}, title = {Fahrerlose Flurf{\"o}rderzeuge / Einsatz bildverarbeitende Systeme}, series = {Taschenbuch Robotik - Montage - Handhabung}, booktitle = {Taschenbuch Robotik - Montage - Handhabung}, publisher = {Fachbuchverlag Leipzig im Carl Hanser Verlag}, address = {M{\"u}nchen}, publisher = {Fachhochschule Technikum Wien}, subject = {Robotics}, language = {de} } @inproceedings{Malisa, author = {Malisa, Viktorio}, title = {Ein Beitrag zu der Standardisierung des Mechatronik-Studiums}, series = {Internationales Forum Mechatronik, Winterthur}, booktitle = {Internationales Forum Mechatronik, Winterthur}, subject = {Mechatronic}, language = {de} } @inproceedings{FechnerBruendlingerMayrBraunetal., author = {Fechner, Hubert and Br{\"u}ndlinger, C. and Mayr-Braun, C. and Ogimoto, K. and Frederiksen, K. and Kropski, B. and Graditi, G. and MacGill, F. and Turcotte, D. and Perret, L.}, title = {Bringing Together International Research On High Penetration Photovoltaics In Electricity Grids - The New Task 14 Of The IEA-Photovoltaic Power Systems Programme}, series = {25th PV World Conference / Valencia (Spain)}, booktitle = {25th PV World Conference / Valencia (Spain)}, subject = {Photovoltaics}, language = {en} } @techreport{BiermayrEhrigStrasseretal., author = {Biermayr, Peter and Ehrig, Rita and Strasser, Christoph and W{\"o}rgetter, Manfred and Pr{\"u}ggler, Natalie and Fechner, Hubert and Nurschinger, Markus and Eberl, Manuela}, title = {Innovative Energietechnologien in {\"O}sterreich Marktentwicklung 2009 Biomasse, Photovoltaik, Solarthermie und W{\"a}rmepumpen}, subject = {Energy Technology}, language = {de} } @inproceedings{PruegglerBremberger, author = {Pr{\"u}ggler, Natalie and Bremberger, Christoph}, title = {A regulatory innovation incentive for alternative grid structure design options}, series = {In Proceedings / 20th USAEE IAEE North American Conference / Energy and the Environment: Conventional and Unconventional Solutions, Calgary (Canada)}, booktitle = {In Proceedings / 20th USAEE IAEE North American Conference / Energy and the Environment: Conventional and Unconventional Solutions, Calgary (Canada)}, subject = {Smart Grids}, language = {en} } @inproceedings{FechnerLugmaier, author = {Fechner, Hubert and Lugmaier, Andreas}, title = {Nationale Technologieplattform Smart Grids Austria - intelligente Stromnetze f{\"u}r die zuk{\"u}nftige Energieversorgung}, series = {e\&i}, booktitle = {e\&i}, subject = {Smart Grids}, language = {en} } @inproceedings{FechnerLopezPolo, author = {Fechner, Hubert and L{\´o}pez-Polo, Assun}, title = {Photovoltaik Technologie Roadmap {\"O}sterreich}, series = {11.Symposium Energieinnovation, TU Graz (Steiermark)}, booktitle = {11.Symposium Energieinnovation, TU Graz (Steiermark)}, subject = {Photovoltaics}, language = {de} } @article{SchidlerJandlBuechsenmeister, author = {Schidler, Susanne and Jandl, Robert and B{\"u}chsenmeister, Richard}, title = {Praktikable Kriterien objektivieren}, series = {Forstzeitung}, journal = {Forstzeitung}, number = {120(9)}, subject = {Sustainability}, language = {de} } @inproceedings{FechnerBrunner, author = {Fechner, Hubert and Brunner, Helfried}, title = {Smart Grid Roadmap For Austria}, series = {CIRED Workshop, Lyon (France)}, booktitle = {CIRED Workshop, Lyon (France)}, subject = {Smart Grids}, language = {en} } @incollection{Hieger, author = {Hieger, Christof}, title = {Steuerung von Industrierobotern / Humanoide Roboter}, publisher = {Fachbuchverlag Leipzig im Carl Hanser Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {156 -- 159}, subject = {Robotics}, language = {de} } @article{Schidler, author = {Schidler, Susanne}, title = {Nachhaltige Entwicklung - Beispiele aus dem Bereich Erneuerbare Rohstoffe / Energien}, series = {AMS Forschungsnetzwerk / Arbeitsmarktservice {\"O}sterreich, Abt. Arbeitsmarktforschung und Berufsinformation / AMS INFO}, journal = {AMS Forschungsnetzwerk / Arbeitsmarktservice {\"O}sterreich, Abt. Arbeitsmarktforschung und Berufsinformation / AMS INFO}, subject = {Sustainability}, language = {de} } @inproceedings{FechnerWatt, author = {Fechner, Hubert and Watt, Greg}, title = {Photovoltaic market and industry trends - latest results from the IEA PVPS Program}, series = {e\&i}, booktitle = {e\&i}, subject = {Photovoltaics}, language = {en} } @inproceedings{Fechner, author = {Fechner, Hubert}, title = {High Penetration Photovoltaics in Electricity Grids}, series = {Invited lecture at 45th IEEE-International Conference on Microelectronics, Devices and Materials, Postojna (Slovenia)}, booktitle = {Invited lecture at 45th IEEE-International Conference on Microelectronics, Devices and Materials, Postojna (Slovenia)}, subject = {Photovoltaics}, language = {en} } @inproceedings{Fechner, author = {Fechner, Hubert}, title = {Direkte Solartechnologien als besondere Chance f{\"u}r {\"O}sterreichs Wirtschaft}, series = {e\&i}, booktitle = {e\&i}, subject = {Solar Technology}, language = {de} } @article{BhatGanglbauerBosch, author = {Bhat, Karthik Subramanya and Ganglbauer, Johanna and Bosch, Elina}, title = {Techno-economic simulation and evaluation of scalable 'energy cells' locally generating renewable energy}, series = {e \& i Elektrotechnik und Informationstechnik}, journal = {e \& i Elektrotechnik und Informationstechnik}, number = {139}, pages = {612 -- 620}, abstract = {The ERA-Net SES project Regional Renewable Energy Cells (R2EC) [1] aims at developing a scalable system for decentralized, interacting 'energy cells' with a high concentration of locally generated renewable energy. 'Energy cells' are essentially Renewable Energy Communities (ECs) in the European context. The system aims at maximizing the utilization of locally generated renewable energy through Electrical Storage (ES) as well as high-electric applications like e‑heating, Heat Pumps (HPs), and E‑Vehicles (EVs). The system is also designed to interact with other energy cells locally, thus, improving the utilization of locally generated energy. A variety of different adjacent energy cells in three countries, Austria (AT), Belgium (BE), and Norway (NO), are analyzed, and the results are used for the development of regional and renewable energy cell systems. This approach aims at developing tailor-made solutions that meet the different local and regional requirements and the electrical energy demand of the observed energy cells. A unique opportunity is created, as the three countries are at varying levels of regional development in the field of energy communities, and the regional requirements and conditions differ significantly. A comprehensive investigation of the technical and economic viability of the ECs in the three regions is conducted on a simulation level. The technical simulation results show an increased self-consumption of individual users and the overall cell in all of the observed testbeds, while the economic analysis shows economic benefits at varying levels in each of the observed testbeds. The implemented R2EC system ascertains both technical and economic viability in the observed testbeds.}, subject = {Energy Cells}, language = {en} } @article{Lang, author = {Lang, Moritz}, title = {The mechanism of scale-invariance}, series = {Automatica}, volume = {140}, journal = {Automatica}, number = {June 2022}, abstract = {A system is invariant with respect to an input transformation if we can transform any dynamic input by this function and obtain the same output dynamics after adjusting the initial conditions appropriately. Often, the set of all such input transformations forms a Lie group, the most prominent examples being scale-invariant (, ) and translational-invariant () systems, the latter comprising linear systems with transfer function zeros at the origin. Here, we derive a necessary and sufficient normal form for invariant systems and, by analyzing this normal form, provide a complete characterization of the mechanism by which invariance can be achieved. In this normal form, all invariant systems (i) estimate the applied input transformation by means of an integral feedback, and (ii) then apply the inverse of this estimate to the input before processing it in any other way. We demonstrate our results based on three examples: a scale-invariant "feed-forward loop", a bistable switch, and a system resembling the core of the mammalian circadian network.}, subject = {Invariant systems}, language = {en} } @inproceedings{LugmaierBrunnerPrueggleretal., author = {Lugmaier, Andreas and Brunner, Helfried and Pr{\"u}ggler, Wolfgang and Gl{\"u}ck, Natalie and Kupzog, Friederich and Fechner, Hubert and Tauschek, Ursula and Rieder, Thomas and Derler, Karl and M{\"u}hlberger, Thomas}, title = {RoadmapSmart Grids Austria Der Weg in die Zukunft der elektrischen Stromnetze!Pathway to the future of electrical power grids!}, series = {FEEI - Fachverband der Elektro- und Elektronikindustrie / {\"O}sterreichs E-Wirtschaft}, booktitle = {FEEI - Fachverband der Elektro- und Elektronikindustrie / {\"O}sterreichs E-Wirtschaft}, subject = {Smart Grids}, language = {de} } @article{KubingerPeschakWoeberetal., author = {Kubinger, Wilfried and Peschak, Bernhard and W{\"o}ber, Wilfried and Sulz, Clemens}, title = {Bildgebende Sensorsystems f{\"u}r robotische Systeme in der Agrar- und Landtechnik}, series = {e\&i Elektrotechnik und Informationstechnik}, volume = {134}, journal = {e\&i Elektrotechnik und Informationstechnik}, number = {6}, pages = {316 -- 322}, subject = {Sensor}, language = {de} } @article{HagauerMatlschweigerTippelreitheretal., author = {Hagauer, Josef and Matlschweiger, Ulrich and Tippelreither, Christian and Lutz, Markus and Hribernig, Thomas and Lackner, Maximilian}, title = {Controlling Metal Fires through Cellulose Flake Blanketing Followed by Water Spray Cooling}, series = {Fire}, volume = {5}, journal = {Fire}, number = {3}, doi = {10.3390/fire5030083}, abstract = {The traditional methods of fighting metal fires are not always safe for firefighters. The sand and salts that are thrown onto the fire to suffocate the flames can lead to splashes of molten metal, putting the firefighters and the surroundings at risk. A novel process is described where magnesium fires are brought under control using a simple two-step process. First, coated cellulose flakes, which contain approx. 30\% inorganic salts, are blown onto the fire from a distance of several meters. Due to its low bulk density, the material settles smoothly on the fire and immediately covers the flames for several seconds. Before the hot metal can break through this cover, a fine water spray is applied to the fire. The water spray wets the top layer of the cellulose flakes, which will begin to char from the bottom. The water evaporates from within the cellulose flake layer and withdraws heat. It was observed that no hydrogen is formed and that this technique can safely control fires. It is judged that 90 kg of flakes could safely bring a pile of 75 kg of burning Mg flakes under control. By using a pneumatic conveying unit for the flakes, firefighters can effectively and efficiently cover the flames from a safe distance. This novel method could be recommended to firefighters in industrial magnesium processing plants, as well as local firefighters in the vicinity of such plants.}, subject = {magnesium fire}, language = {en} } @inproceedings{WoeberKeferKubingeretal., author = {W{\"o}ber, Wilfried and Kefer, Martin and Kubinger, Wilfried and Szuegyi, Daniel}, title = {Evaluation of Daylight and Thermal Infra-Red based Detection for Platooning Vehicles}, series = {Annals of DAAM for 2012 and Proceedings of the 23rd International DAAM Symposium}, booktitle = {Annals of DAAM for 2012 and Proceedings of the 23rd International DAAM Symposium}, pages = {719 -- 722}, subject = {Vehicle}, language = {en} } @incollection{WoeberPeschakOtrebski, author = {W{\"o}ber, Wilfried and Peschak, Bernhard and Otrebski, Richard}, title = {ASK: Entwicklung eines modularen Systems zur Automatisierung landwirtschaftlicher Maschinen}, series = {Intelligente Systeme - Stand der Technik und neue M{\"o}glichkeiten. Lecture Notes in Informatics}, booktitle = {Intelligente Systeme - Stand der Technik und neue M{\"o}glichkeiten. Lecture Notes in Informatics}, address = {Bonn}, publisher = {Fachhochschule Technikum Wien}, pages = {221 -- 224}, subject = {Automation}, language = {de} } @inproceedings{TabakovicCsapo, author = {Tabakovic, Momir and Csapo, Csilla}, title = {Industry - University cooperation in the renewable energy field in south Africa- Gap analysis and enhancement proposals}, series = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz}, booktitle = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz}, subject = {Renewable Energies}, language = {en} } @inproceedings{SteiglAburaiaWoeber, author = {Steigl, D and Aburaia, Mohamed and W{\"o}ber, Wilfried}, title = {Autonomous Grasping of Known Objects Using Depth Data and the PCA}, series = {Austrian Robotics Workshop 2020}, booktitle = {Austrian Robotics Workshop 2020}, subject = {Robotic}, language = {en} } @article{DilerYanarOezdemiretal., author = {Diler, Abdulkerim and Yanar, Mete and {\"O}zdemir, Veysel Fatih and Aydin, Recep and Kaynar, {\"O}zg{\"u}r and Palangi, Valiollah and Lackner, Maximilian and Ko{\c{c}}yigit, R{\i}dvan}, title = {Effects of Slaughter Age of Holstein Friesian Bulls on Meat Quality: Chemical Composition, Textural Characteristics, Sensory Attributes and Fatty Acid Profile}, series = {Foods}, volume = {12}, journal = {Foods}, number = {1}, doi = {10.3390/foods12010158}, abstract = {This study aimed to investigate the effects of slaughter age (young vs. old), muscle type (Longissimus dorsi (LD), Gluteus medius (GM)) and fat deposits (kidney knob and channel fat, subcutaneous fat, intramuscular fat) on chemical, organoleptic, textural characteristics and fatty acid composition of Holstein Friesian bull meat. For this purpose, the carcasses of 26 Holstein Friesian bulls that had been fattened on the same private farm were assigned to two experimental groups based on their age at slaughter: a young group (YG) (average age: 17.0 ± 1.0 months old) and an old group (OG) (average age: 22.0 ± 1.0 months old). The percentage of crude protein, panel tenderness score, polyunsaturated fatty acid (PUFA) and saturated fatty acid (SFA) content, the PUFA/SFA ratio and the hypocholesterolemic fatty acid (DFA)/hypercholesterolemic fatty acid (OFA) ratio of the bull carcasses decreased significantly with increasing slaughter age. By contrast, the OFA content of the carcasses significantly increased (p < 0.05) with increasing slaughter age. Advanced slaughter age resulted in lower panel tenderness scores. Additionally, the meat of the bulls in the OG was considered to be less healthy because of the less desirable fatty acid composition and nutritional indices, such as the PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios, compared to the meat from the bulls in the YG. Furthermore, the intramuscular fat and internal fat contained high percentages of PUFA and SFA and high PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios. Interestingly, the percentage of OFA content in the internal and intramuscular fat tissues decreased with increasing slaughter age. In conclusion, this study provided evidence that slaughter age and muscle and fat type are essential sources of variations in the textural characteristics, sensory panel attributes and fatty acid profile of meat from Holstein Friesian bulls.}, subject = {fatty acid profile}, language = {en} } @article{BağcıkKocErtenetal., author = {Bağc{\i}k, Caner and Ko{\c{c}}, Fisun and Erten, Kadir and Esen, Selim and Palangi, Valiollah and Lackner, Maximilian}, title = {Lentilactobacillus buchneri Preactivation Affects the Mitigation of Methane Emission in Corn Silage Treated with or without Urea}, series = {Fermentation}, volume = {8}, journal = {Fermentation}, number = {12}, doi = {10.3390/fermentation8120747}, abstract = {The aim of this study was to investigate the effect of different forms of Lentilactobacillus buchneri on the in vitro methane production, fermentation characteristics, nutritional quality, and aerobic stability of corn silage treated with or without urea. The following treatments were applied prior to ensiling: (1) no urea treatment and LB; (2) no urea treatment+freeze dried LB; (3) no urea treatment+preactivated LB; (4) with urea treatment+no LB; (5) with urea treatment+freeze dried LB; (6) with urea treatment+preactivated. LB was applied at a rate of 3 × 108 cfu/kg on a fresh basis, while urea was applied at a rate of 1\% on the basis of dry matter. Data measured at different time points were analyzed according to a completely randomized design, with a 2 × 3 × 5 factorial arrangement of treatments, while the others were analyzed with a 2 × 3 factorial arrangement. Preactivated LB was more effective than freeze-dried LB in reducing silage pH, ammonia nitrogen, cell-wall components, yeast count, and carbon dioxide production, as well as increasing lactic acid and residual water-soluble carbohydrate and aerobic stability (p < 0.0001). A significant reduction in the methane ratio was observed after 24 h and 48 h incubation with preactivated forms of LB (p < 0.001). The results indicated that preactivated LB combined with urea improved fermentation characteristics, nutritional quality, and aerobic stability and reduced the methane ratio of corn silages.}, subject = {gas production}, language = {en} } @article{CoşkuntunaLacknerErtenetal., author = {Co{\c{s}}kuntuna, Levend and Lackner, Maximilian and Erten, Kadir and G{\"u}l, Sevilay and Palangi, Valiollah and Ko{\c{c}}, Fisun and Esen, Selim}, title = {Greenhouse Gas Emission Reduction Potential of Lavender Meal and Essential Oil for Dairy Cows}, series = {Fermentation}, volume = {9}, journal = {Fermentation}, number = {3}, doi = {10.3390/fermentation9030253}, abstract = {This research aims to evaluate the potential of lavender meal (LM) and lavender essential oil (LEO) to mitigate methane emissions by dairy cows. Locally grown lavender was collected fresh for this purpose, and its oil was extracted using the cold-press method. The resultant LEO and LM and whole lavender (WL) were added to dairy cow concentrate feed at 0\%, 0.05\%, and 0.10\%, and their effects on vitro gas production values and gas concentrations were subsequently assessed. Out of the 30 bioactive compounds isolated from LEO, linalool and linalyl acetate were the most common—accounting for 70.4\% of the total. The lavender dose had a significant influence on gas production for up to 12 h. No significant variations were found across the lavender forms when gas kinetics, in vitro degradability, and predicted energy values were compared. The addition of WL to the concentrate feed of dairy cows produced the greatest quantities of methane, carbon dioxide, and hydrogen sulfide, whereas LEO resulted in the lowest values. In contrast, no significant difference in ammonia content was found across the various lavender forms added into dairy cow concentrate feed. The results of this research suggest that adding 0.05-0.10\% LM and LEO to concentrate feed may decrease greenhouse gas emissions from dairy cows.}, subject = {lavender}, language = {en} } @inproceedings{ValckenborgBergerUjvarietal., author = {Valckenborg, Roland and Berger, Karl A. and {\´U}jv{\´a}ri, Guszt{\´a}v and Eder, Gabriele C. and Gaisberger, Lukas and Tabakovic, Momir and Polo Lopez, Christina S. and Boddaert, Simon and del Buono, Matteo and Mart{\´i}n Chivelet, Nuria and Sanz Martinez, Asier and Kim, Jun-Tae and Gerd Imenes, Anne}, title = {COMPARISON OF IEC 61853-1 MATRIX EVALUATIONS BASED ON INDOOR AND OUTDOOR MEASUREMENT DATA FROM PVPS TASK 15 BIPV ROUND-ROBIN}, series = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021}, booktitle = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021}, subject = {Measurement}, language = {en} } @misc{BucherAburaiaMarkletal., author = {Bucher, Christoph Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzales-Gutierrez, J. and Lammer, Helmuth}, title = {Continuous fiber reinforced freeform 3D printing}, subject = {Additive Manufacturing}, language = {en} } @article{MarklLackner, author = {Markl, Erich and Lackner, Maximilian}, title = {Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review}, series = {Materials}, volume = {13}, journal = {Materials}, number = {5}, doi = {10.3390/ma13051246}, abstract = {In general, composite materials are difficult to recycle. Tires belong to this class of materials. On top, one of their main constitutents, vulcanized rubber, is as elastomer, which cannot be remolten and hence is particularly challenging to put to a new use. Today, the main end-of-life routes of tires and other rubber products are landfilling, incineration in e.g., cement plants, and grinding to a fine powder, generating huge quantities and indicating a lack of sustainable recycling of this valuable material. True feedstock recycling is not feasible for complex mixtures such as tires, but devulcanization can be done to reactivate the cross-linked polymer for material recycling in novel rubber products. Devulcanization, i.e., the breaking up of sulfur bonds by chemical, thermophysical, or biological means, is a promising route that has been investigated for more than 50 years. This review article presents an update on the state-of-the art in rubber devulcanization. The article addresses established devulcanization technologies and novel processes described in the scientific and patent literatures. On the one hand, tires have become high-tech products, where the simultaneous improvement of wet traction, rolling resistance, and abrasion resistance (the so-called "magic triangle") is hard to achieve. On the other hand, recycling and sustainable end-of-life uses are becoming more and more important. It is expected that the public discussion of environmental impacts of thermoplastics will soon spill over to thermosets and elastomers. Therefore, the industry needs to develop and market solutions proactively. Every year, approximately 40 million tons of tires are discarded. Through the devulcanization of end-of-life tires (ELT), it is possible to produce new raw materials with good mechanical properties and a superior environmental footprint over virgin products. The devulcanization process has become an interesting technology that is able to support the circular economy concept.}, subject = {rubber devulcanization}, language = {en} } @article{BesharatiPalangiNiazifaretal., author = {Besharati, Maghsoud and Palangi, Valiollah and Niazifar, Masoumeh and Esen, Selim and Lackner, Maximilian}, title = {A Comprehensive Analysis of Cinnamon, Flaxseed, and Lemon Seed Essential Oils' Effects on In Vitro Gas Formation and Nutrient Degradability in Diets}, series = {Fermentation}, volume = {9}, journal = {Fermentation}, number = {6}, doi = {10.3390/fermentation9060504}, abstract = {This study aimed to assess the impact of essential oils (EOs) on in vitro gas formation and the degradability of dairy and beef cattle diets. This study also aimed to investigate the effects of different types of EOs on nutrient utilization and rumen microbial activity. The current study was conducted using a fully randomized design consisting of eight experimental treatments, including two control treatments without any additives, and treatments with cinnamon essential oil (CEO), flaxseed essential oil (FEO), and lemon seed essential oil (LEO) at a concentration of 60 mg/kg fresh mass. Two control treatments were used, one with alfalfa silage and dairy concentrate (DC, CON-DC) and the other with alfalfa silage and fattening concentrate (FC, CON-FC). Gas formation, dry matter (DM) digestibility, crude protein (CP) digestibility, effective degradability (ED), and soluble fractions of DM and organic matter (OM) were evaluated. CEO had a substantial effect on gas formation (p < 0.05). When EOs were added to the diets, they increased dry matter digestibility after 24 h of incubation as compared to control treatments. After 24 h of incubation, FCCEO and FCFEO had the highest CP digestibility among the diets. FCLEO considerably enhanced ED, as well as the soluble fraction of DM (a) at a passage rate of 2\% per hour. Treatment with FCCEO resulted in a significant increase in soluble fractions compared to the control diets. At a passage rate of 2\% h, DCCEO had the maximum ED value. When EOs were introduced to the diet, they dramatically decreased the insoluble portion of CP (b). Compared to the control treatments, gas production was significantly lower in the presence of LEO (FCLEO; p < 0.05). The addition of EOs to cattle diets may increase nutrient utilization and enhance rumen microbial activity. EOs extracted from lemon seeds (at a dose of 60 mg/kg of diet) lowered gas production in both dairy cattle and fattening diets.}, subject = {Digestibility}, language = {en} } @article{PalangiTaghizadehAbachietal., author = {Palangi, Valiollah and Taghizadeh, Akbar and Abachi, Soheila and Lackner, Maximilian}, title = {Strategies to Mitigate Enteric Methane Emissions in Ruminants: A Review}, series = {Sustainability}, volume = {Vol. 14}, journal = {Sustainability}, number = {Issue 20}, doi = {10.3390/su142013229}, abstract = {Methane is the main greenhouse gas (GHG) emitted by ruminants. Mitigation strategies are required to alleviate this negative environmental impact while maintaining productivity and ruminants' health. To date, numerous methane mitigation strategies have been investigated, reported and suggested by scientists to the livestock industry. In this review, the authors will focus on the commonly practiced and available techniques expanding the knowledge of the reader on the advances of methane mitigation strategies with a focus on the recent literature. Furthermore, the authors will attempt to discuss the drawbacks of the strategies in terms of animal health and performance reduction as well as the concept of feed and energy loss, adding an economic perspective to methane emission mitigation which is in the farmers' direct interest. As a whole, many factors are effective in reducing undesired methane production, but this is definitely a complex challenge. Conclusively, further research is required to offer effective and efficient methane production mitigation solutions in ruminants worldwide, thus positively contributing to climate change.}, subject = {greenhouse gas (GHG)}, language = {en} } @article{MokhtarzadehNobakhtMehmannavazetal., author = {Mokhtarzadeh, Shakir and Nobakht, Ali and Mehmannavaz, Yousef and Palangi, Valiollah and Eseceli, H{\"u}seyin and Lackner, Maximilian}, title = {Impacts of Continuous and Intermittent Use of Bovine Colostrum on Laying Japanese Quails: Egg Performance and Traits, Blood Biochemical and Antioxidant Status}, series = {Animals}, volume = {12}, journal = {Animals}, number = {Issue 20}, doi = {10.3390/ani12202811}, abstract = {Quail is used in cookery, but mainly for its egg production around the globe, and sustainable poultry farming practices have been searched. The use of colostrum (beestings or first milk from cows) in quails' diet can play an important role in providing probiotics and reducing the need for antibiotics, which, in addition to better quail performance, is effective in reducing environmental impacts. The results of the current research show that the continuous use of bovine colostrum (BC) in laying quails' diets has beneficial effects on their performance, egg traits, blood indexes and antioxidant status.}, subject = {antioxidant}, language = {en} } @article{PalangiLackner, author = {Palangi, Valiollah and Lackner, Maximilian}, title = {Management of Enteric Methane Emissions in Ruminants Using Feed Additives: A Review}, series = {Animals}, volume = {12}, journal = {Animals}, number = {24}, doi = {10.3390/ani12243452}, abstract = {Methane emission from enteric fermentation in ruminants is the single most relevant greenhouse gas source in agriculture, and it is amongst the largest anthropogenic ones. As ruminants are needed globally for meat, milk and other goods production on a huge scale, feed additives could offer an interesting solution to reduce CH4 emissions. Methane emission strategies are investigated to maintaining productivity and the overall health of the animal. Some strategies have shown to reduce the propagation and/or eliminate ruminal flora affecting the health and productivity of the animal. Therefore, identifying beneficial strategies leads to improving productivity and the health of the animal and environment.}, subject = {greenhouse gas}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {EU-ASCIN - Projektpr{\"a}sentation}, subject = {Smart City}, language = {en} } @article{WoeberRauerPapaetal., author = {W{\"o}ber, Wilfried and Rauer, Johannes and Papa, Maximilian and Aburaia, Ali and Schwaiger, Simon and Novotny, Georg and Aburaia, Mohamed and Kubinger, Wilfried}, title = {Evaluierung von Navigationsmethoden f{\"u}r mobile Roboter}, series = {e \& i Elektrotechnik und Informationstechnik}, journal = {e \& i Elektrotechnik und Informationstechnik}, subject = {Robotics}, language = {de} } @inproceedings{SchneiderZelgerTabakovic, author = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir}, title = {State of play and future of small-town urban buildings guided by an energy-autonomy vision statement: consumption, calculation and potential embedded in Smart City Demo Way2Smart}, series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, pages = {62 -- 66}, subject = {Smart City}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Enhancing PHB Production in Synechocystis sp. PCC 6714 by means of Process Engineering and Multivariate Design of Experiments}, subject = {PHB}, language = {en} } @inproceedings{SchwaigerAburaiaAburaiaetal., author = {Schwaiger, Simon and Aburaia, Mohamed and Aburaia, Ali and W{\"o}ber, Wilfried}, title = {Explainable Artificial Intelligence for Robot Arm Control}, series = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna}, volume = {32}, booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna}, number = {1}, pages = {0640 -- 0647}, subject = {Artificial Intelligence}, language = {en} } @inproceedings{LacknerMarklAburaia, author = {Lackner, Maximilian and Markl, Erich and Aburaia, Mohamed}, title = {Cybersecurity Management for (Industrial) Internet of Things: Challenges and Opportunities}, series = {Journal of Information Technology \& Software Engineering Keywords}, booktitle = {Journal of Information Technology \& Software Engineering Keywords}, subject = {Security}, language = {en} } @techreport{TabakovicFechnerLeonhartsberger, author = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt}, title = {National Survey Report of PV Power Applications in Austria 2016}, organization = {IEA - International Energy Agency}, subject = {Photovoltaics}, language = {en} } @techreport{TabakovicFechnerLeonhartsberger, author = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt}, title = {National Survey Report of PV Power Applications in Austria 2015}, subject = {Photovoltaics}, language = {en} } @article{SchneiderBartlmaeLeiboldetal., author = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}fmann, Petra and Tabakovic, Momir and Zelger, Thomas}, title = {New Assessment Method for Buildings and Districts towards "Net Zero Energy Buildings" Compatible with the Energy Scenario 2050}, series = {REAL CORP 2019}, journal = {REAL CORP 2019}, number = {April 2019}, subject = {Renewable Energies}, language = {en} } @misc{TabakovicSchneiderLaurentetal., author = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegrund}, title = {Korneuburgs way2smart - mobility concept, energy platform and social interaction}, subject = {Energy Supply}, language = {en} } @incollection{KrieglerWoeberAburaia, author = {Kriegler, Andreas and W{\"o}ber, Wilfried and Aburaia, Mohamed}, title = {Artificial Neural Networks Based Place Categorization}, series = {Digital Conversion on the Way to Industry 4.0}, booktitle = {Digital Conversion on the Way to Industry 4.0}, publisher = {Springer Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {201 -- 209}, subject = {Artificial Intelligence}, language = {en} } @misc{Lackner, author = {Lackner, Maximilian}, title = {PHA - Biopolymere mit Potential}, subject = {Bioplastics}, language = {de} } @article{StadlerBloeschlVogletal., author = {Stadler, Philipp and Bl{\"o}schl, G{\"u}nter and Vogl, Wolfgang and Koschelnik, Juri and Epp, Markus, and Lackner, Maximilian and Oism{\"u}ller, Markus and Kumpan, Monika and Nemeth, Lukas, and Strauss, Peter and Sommer, Regina and Ryzinska-Paier, Gabriela and Farnleitner, Andras and Zessner, Matthias}, title = {Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams: A comparison of prototypes}, series = {Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams}, journal = {Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams}, subject = {Enzymes}, language = {en} } @article{LacknerLutzHribernig, author = {Lackner, Maximilian and Lutz, Markus and Hribernig, Thomas}, title = {Neuartiges Verfahren zum L{\"o}schen von Metallbr{\"a}nden mit Zelluloseflakes}, series = {Feuerwehr Fachjournal}, journal = {Feuerwehr Fachjournal}, number = {September 2021}, pages = {54}, subject = {Extinguisher}, language = {de} } @book{WalaEllingerFranzetal., author = {Wala, Thomas and Ellinger, Florian and Franz, Peter and Kriz, Agnes and Zangl, Sabine and Sohm, Kurt and Tabakovic, Momir and Gollner, Helmut and Adams, Mark and Litzenberger, Stefan}, title = {Internationalisierung von Fachhochschulstudieng{\"a}ngen.: Ideen, Konzepte \& Erfahrungsberichte}, publisher = {Independently Published}, isbn = {ISBN-13 : ‎979-8650872184}, publisher = {Fachhochschule Technikum Wien}, subject = {Internationalisation}, language = {en} } @article{EngelhardtNowitzkiAburaiaOtrebskietal., author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Otrebski, Richard and Rauer, Johannes and Orsolits, Horst}, title = {Research-based teaching in Digital Manufacturing and Robotics - the Digital Factory at the UAS Technikum Wien as a Case Example}, series = {Procedia Manufacturing}, journal = {Procedia Manufacturing}, number = {Volume 45}, pages = {164 -- 170}, subject = {Digital Factory}, language = {en} } @article{AburaiaBucherLackneretal., author = {Aburaia, Mohamed and Bucher, Christoph and Lackner, Maximilian and Gonzalez-Gutierrez, Joamin and Zhang, Haiguang and Lammer, Herfried}, title = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament}, series = {Biomaterials and Medical Applications}, journal = {Biomaterials and Medical Applications}, subject = {Filament}, language = {en} } @incollection{FelberAburaiaWoeberetal., author = {Felber, Stefan Otto and Aburaia, Mohamed and W{\"o}ber, Wilfried and Lackner, Maximilian}, title = {Parameter Optimization for the 3D Print of Thermo-Plastic Pellets with an Industrial Robot}, series = {Digital Conversion on the Way to Industry 4.0}, booktitle = {Digital Conversion on the Way to Industry 4.0}, publisher = {Fachhochschule Technikum Wien}, pages = {236 -- 247}, subject = {Thermo Plastics}, language = {en} } @article{RauerAburaiaWoeber, author = {Rauer, Johannes and Aburaia, Mohamed and W{\"o}ber, Wilfried}, title = {Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Graspin}, series = {Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020}, journal = {Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020}, pages = {2 -- 3}, subject = {Robotics}, language = {en} } @inproceedings{AbdankAburaiaWoeber, author = {Abdank, Moritz and Aburaia, Mohamed and W{\"o}ber, Wilfried}, title = {Using-Colour-Based Object Detection for Pick and Place Applications}, series = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna}, volume = {32}, booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna}, number = {1}, pages = {0536 -- 0541}, subject = {Computer Vision}, language = {en} } @inproceedings{WoeberAburaiaAburaiaetal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich}, title = {Konferenz der Mechatronik-Plattform: Autonome mechatronische Systeme}, series = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering}, booktitle = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering}, subject = {Autonom}, language = {en} } @inproceedings{BucherAburaiaMarkletal., author = {Bucher, Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzalez-Gutierrez, Joamin and Lammer, Herfried}, title = {Poster Symposium on ADDitive Manufacturing and Innovative Technologies}, series = {Symposium on ADDitive Manufacturing and Innovative Technologies}, booktitle = {Symposium on ADDitive Manufacturing and Innovative Technologies}, subject = {Innovative Technologies}, language = {en} } @article{EngelhardtNowitzkiAburaiaOtrebskietal., author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Otrebski, Richard and Rauer, Johannes and Orsolits, Horst}, title = {Research-based teaching in Digital Manufacturing and Robotics - the Digital Factory at the UAS Technikum Wien as a Case Example}, series = {Procedia Manuf}, journal = {Procedia Manuf}, subject = {Teaching}, language = {en} } @article{AburaiaLacknerBucheretal., author = {Aburaia, Mohamed and Lackner, Maximilian and Bucher, Michael and Gonzalez-Gutierrez, Joamin and Zhang, Haiguang and Lammer, Herfried}, title = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament}, series = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament," vol. 4, no. 1, p. 12, 2020}, journal = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament," vol. 4, no. 1, p. 12, 2020}, subject = {Production}, language = {en} } @inproceedings{WernerAburaiaRaschendorferaetal., author = {Werner, Jan and Aburaia, Mohamed and Raschendorfera, A and Lackner, Maximilian}, title = {MeshSlicer: A 3D-Printing software for printing 3D-models with a 6-axis industrial robot}, series = {14th CIRP, Gulf of Naples, Italy, 2020}, booktitle = {14th CIRP, Gulf of Naples, Italy, 2020}, subject = {3D}, language = {en} } @inproceedings{RauerAburaiaWoeber, author = {Rauer, Johannes and Aburaia, Mohamed and W{\"o}ber, Wilfried}, title = {Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Grasping}, series = {Austrian Robotics Workshop 2020}, booktitle = {Austrian Robotics Workshop 2020}, subject = {Semi-Automatic}, language = {en} } @inproceedings{AburaiaLackner, author = {Aburaia, Mohamed and Lackner, Maximilian}, title = {Parameter Optimization for the 3D Print of Thermo-plastic Pellets with an Industrial Robot}, series = {International Symposium for Production Research 2020, Turkey}, booktitle = {International Symposium for Production Research 2020, Turkey}, subject = {3D}, language = {en} } @inproceedings{KainrathAburaiaLackner, author = {Kainrath, Martin and Aburaia, Mohamed and Lackner, Maximilian}, title = {Accuracy Improvement and Process Flow Adaption for Robot Machining}, series = {International Symposium for Production Research 2020, Turkey}, booktitle = {International Symposium for Production Research 2020, Turkey}, subject = {Robot}, language = {en} } @inproceedings{KeferWoeberSzuegyietal., author = {Kefer, Martin and W{\"o}ber, Wilfried and Szuegyi, Daniel and Kubinger, Wilfried}, title = {A Novel and Automated Circle Pattern Recognition Technique for Infra-Red Stero Camera Calibration}, series = {Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications}, booktitle = {Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications}, pages = {404 -- 410}, subject = {Pattern Recognition}, language = {en} } @techreport{ZelgerFechnerSetznageletal., author = {Zelger, Thomas and Fechner, Hubert and Setznagel, R. and Tabakovic, Momir}, title = {THEBAVOL: Anwendungen und Grenzen der THErmischen BAuteilaktivierung im großVOLumigen Geschoßbau}, subject = {Building Parts}, language = {de} } @inproceedings{KrieglerWoeber, author = {Kriegler, Andreas and W{\"o}ber, Wilfried}, title = {Vision-based Docking of a Mobile Robot}, series = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020}, booktitle = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020}, pages = {6 -- 12}, subject = {Automation}, language = {en} } @inproceedings{Orsolits, author = {Orsolits, Horst}, title = {Virtual Engineering Applied in a Digital Learning Factory}, series = {Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region}, booktitle = {Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region}, subject = {Virtual Engineering}, language = {de} } @misc{Lackner, author = {Lackner, Maximilian}, title = {Cyanobacteria as model organism for PHB production}, subject = {Bacteria}, language = {en} } @inproceedings{WoeberSupperAschaueretal., author = {W{\"o}ber, Wilfried and Supper, Georg and Aschauer, Christian and Gronauer, Andreas and Tomic, Dana Kathrin and H{\"o}rmann, Sandra}, title = {Entwicklung eines auf semantischer Technologie basierenden Analysesystems zur {\"U}berwachung der Wasserversorgung von landwirtschaftlichen Nutzfl{\"a}chen}, series = {Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexit{\"a}t versus Bedienbarkeit/Mensch-Maschine-Schnittstellen}, booktitle = {Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexit{\"a}t versus Bedienbarkeit/Mensch-Maschine-Schnittstellen}, abstract = {Eine ressourcenschonende Bew{\"a}sserung von Nutzpflanzen wird durch den Klimawandel in den n{\"a}chsten Jahren immer gr{\"o}ßere Bedeutung gewinnen. Eine M{\"o}glichkeit, das f{\"u}r Pflanzen zur Verf{\"u}gung stehende Wasserpotential beurteilen zu k{\"o}nnen, ist die Nutzung von klimatischen Faktoren und Computermodellen. In diesem Beitrag wird die Entwicklung eines auf dem Forschungsprojekt agriOpenLink basierten Softwaresystems zur Absch{\"a}tzung der Evapotranspiration auf einer landwirtschaftlichen Nutzfl{\"a}che beschrieben. Der Fokus dieses Berichts liegt auf dem Softwareframework, welches auf semantischer Technologie basiert und formalisiertes landwirtschaftliches Wissen sowie Computermodelle zur Absch{\"a}tzung der Evapotranspiration beinhaltet. Es werden erste experimentelle Ergebnisse diskutiert und die semantische Technologie bez{\"u}glich praktischer Nutzung evaluiert.}, subject = {Semantic Modelling}, language = {de} } @misc{TabakovicSchneiderLaurentetal., author = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegund}, title = {Korneuburgs way2smart - mobility concept, energy platform and social interaction}, subject = {Energy Market}, language = {en} } @inproceedings{Lackner, author = {Lackner, Maximilian}, title = {Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production}, series = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, subject = {Process Engineering}, language = {en} } @article{Lackner, author = {Lackner, Maximilian}, title = {Industrial Engineering Management - THE key skill for the Digital Age}, series = {The International Journal of Engineering and Science (THE IJES)}, journal = {The International Journal of Engineering and Science (THE IJES)}, subject = {Management}, language = {en} } @inproceedings{TabakovicFechnervanSarketal., author = {Tabakovic, Momir and Fechner, Hubert and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Aranc{\´o}n, Sofia and Geourghiou, George and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza and Ioannidou, Monica}, title = {Development of BIPV courseware for students and professionals}, series = {Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017)}, booktitle = {Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017)}, pages = {2895 -- 2899}, subject = {Education}, language = {en} } @misc{TabakovicFechnervanSarketal., author = {Tabakovic, Momir and Fechner, Hubert and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Aranc{\´o}n, Sofia and Geourghiou, George and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza and Ioannidou, Monica}, title = {Development of BIPV courseware for students and professionals}, subject = {Education}, language = {en} } @misc{SchneiderTabakovic, author = {Schneider, Simon and Tabakovic, Momir}, title = {Aktueller Stand und Zukunft von stadteigenen Geb{\"a}uden einer Kleinstadt mit energieautonomen Leitbild: Verbrauch, Berechnung und Potential im Rahmen von Smart City Demo Way2Smart}, subject = {Smart City}, language = {de} } @misc{DannerederEngelhardtNowitzkiMarkletal., author = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane}, title = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control}, subject = {Robotics}, language = {en} } @inproceedings{WoeberAburaiaAburaiaetal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich}, title = {Digital Manufacturing \& Robotics im Department Industrial Engineering}, series = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme}, booktitle = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme}, subject = {Digital Manufacturing}, language = {de} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Status and outlook for building integrated photovoltaics(BIPV) in relation to educational needs in the BIPV sector}, subject = {Photovoltaics}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Integrative Secondary Education Programmes and Research in Smart Cities Context}, subject = {Smart City}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Welche Speicher und Netze braucht die Energiewende?}, subject = {Energy Storage}, language = {de} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {EU-ASCIN - Projektpr{\"a}sentation}, subject = {Smart City}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {EU-ASCIN - Projektpr{\"a}sentation}, subject = {Smart City}, language = {de} } @techreport{vanSarkLouwenGeourghiouetal., author = {van Sark, Wilfried and Louwen, Atse and Geourghiou, George and Makrides, George and Loucaidou, Eliza and Ioannidou, Monica and Fechner, Hubert and Tabakovic, Momir and Weiss, Ingrid and Aranc{\´o}n, Sofia}, title = {Review of the BIPV market and education needs in the field - Framework and Requirements' Analysis}, subject = {Photovoltaics}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Smart Cities Education as Mobility, Energy \& ICT Hub}, subject = {Smart City}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Smart Grids at the University AS Technikum Vienna}, subject = {Smart Grids}, language = {en} } @article{MarklGruenbichlerLackner, author = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian}, title = {Cyanobacteria for PHB Bioplastics Production: A Review}, series = {IntechOpen}, journal = {IntechOpen}, pages = {10}, abstract = {Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78\% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature.}, subject = {Bio-based Plastics}, language = {en} } @article{KnappLacknerMarkl, author = {Knapp, Alexander and Lackner, Maximilian and Markl, Erich}, title = {Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning}, series = {International Journal of Advance Engineering and Research Development}, journal = {International Journal of Advance Engineering and Research Development}, issn = {2348-4470}, pages = {84 -- 86}, abstract = {Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents.}, subject = {Floor cleaning}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Bioprocess Development for Sustainable poly-β-hydroxybutyrate Production}, subject = {Bioplastics}, language = {en} } @article{MarklGruenbichlerLackner, author = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian}, title = {PHB - Bio Based and Biodegradable Replacement for PP: A Review}, series = {Novel Techniques in Nutrition and Food Science}, volume = {2}, journal = {Novel Techniques in Nutrition and Food Science}, number = {2}, pages = {4}, subject = {Bio Degradable}, language = {en} } @book{deVriesMarklLackner, author = {de Vries, Sytse and Markl, Erich and Lackner, Maximilian}, title = {Energy efficiency management in the shipping industry}, publisher = {Lambert Academic Publishing}, isbn = {978 3 659 71981 3}, publisher = {Fachhochschule Technikum Wien}, subject = {Transportation}, language = {en} } @inproceedings{GruenbichlerEngelhardtNowitzkiMarkletal., author = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert}, title = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios}, series = {th International Conference on Smart Materials and Structures}, booktitle = {th International Conference on Smart Materials and Structures}, publisher = {Material Sci Eng 2018 (7)}, subject = {Robotics}, language = {en} } @misc{GruenbichlerEngelhardtNowitzkiMarkletal., author = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert}, title = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios}, subject = {Robotics}, language = {en} } @inproceedings{LacknerZanglLembacheretal., author = {Lackner, Maximilian and Zangl, Sabine and Lembacher, Harald and R{\"u}ttinger, Norbert and Fochler, Claus}, title = {Non-wovens and recycling - An overview, International Conference on Recycling and Waste Water Management}, series = {International Conference on Recycling and Waste Water Management}, booktitle = {International Conference on Recycling and Waste Water Management}, subject = {Environment}, language = {en} } @article{SchneiderBartlmaeLeiboldetal., author = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}ffmann, Petra and Tabakovic, Momir and Zelger, Thomas}, title = {New assessment method for buildings and districts towards "Net Zero Energy Buildings" compatible with the energy scenario 2050}, series = {Corp}, journal = {Corp}, pages = {10}, subject = {Energy Technologies}, language = {en} } @inproceedings{TabakovicSchneiderLeiboldetal., author = {Tabakovic, Momir and Schneider, Simon and Leibold, Jens and Zelger, Thomas and Bartlm{\"a}, Nadja and Holzer, Peter and Sch{\"o}ffmann, Petra}, title = {Way to positive energy districts in Vienna}, series = {Mission Innovation Austria}, booktitle = {Mission Innovation Austria}, subject = {Energy Technologies}, language = {en} } @incollection{Tabakovic, author = {Tabakovic, Momir}, title = {Development and Implementation of BIPV Courseware for Higher Education and Professionals}, series = {Smart Education and e-Learning}, booktitle = {Smart Education and e-Learning}, publisher = {Springer}, publisher = {Fachhochschule Technikum Wien}, subject = {Education}, language = {en} } @inproceedings{RauhOrsolits, author = {Rauh, Sebastian and Orsolits, Horst}, title = {Perspectives on Virtual Reality in Higher Education for Robotics and Related Engineering Disciplines}, series = {Robotics in Education (International Conference on Robotics in Education)}, booktitle = {Robotics in Education (International Conference on Robotics in Education)}, publisher = {Springer}, isbn = {978-3-031-12848-6}, pages = {39 -- 51}, abstract = {Industrial engineering education has a strong focus on and affinity towards technology. While Virtual Reality hardware and applications advance and learning behaviour changes, it is particularly interesting to determine the possible use of Virtual Reality for teaching engineering subjects, for example fundamentals of robotics. This paper presents a study which examines the possible use of Virtual Reality learning environments at higher learning institutions. The study shows perspectives of students and lecturers and identifies opportunities and challenges for the use of Virtual Reality in industrial engineering education. The results of the indicated study show that the participants have a positive attitude towards Virtual Reality and strong motivation for in class use. The study results also suggest, that Virtual Reality content creation should be included in engineering curricula.}, subject = {Virtual reality}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves}, subject = {Generator}, language = {en} } @book{Tabakovic, author = {Tabakovic, Momir}, title = {Analyze and optimize the prototype of a thermoelectric generator: as an electrical renewable power source for biomass stoves}, publisher = {AV Akademikerverlag}, publisher = {Fachhochschule Technikum Wien}, subject = {Biomass}, language = {en} } @misc{MarklOrsolitsStojicic, author = {Markl, Erich and Orsolits, Horst and Stojicic, Dario}, title = {Virtuelle Technologien in der Robotik}, subject = {Robotics}, language = {de} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Way2Smart Korneuburg: Smart Cities Projekt}, subject = {Smart City}, language = {de} } @phdthesis{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversion of waste heat into electric energy by thermoelectric generators}, school = {Fachhochschule Technikum Wien}, abstract = {The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber.}, subject = {Energy Technologies}, language = {en} } @misc{LacknerKamravamaneshMarkletal., author = {Lackner, Maximilian and Kamravamanesh, Donya and Markl, Erich and Engelhardt-Nowitzki, Corinna and Herwig, Christoph}, title = {Optimization of process parameters to enhance Polyhydroxyalkanoate accumulation in a unicellular cyanobacterium using multivariate experimental design approach}, subject = {Bacteria}, language = {en} } @misc{OrsolitsGallasch, author = {Orsolits, Horst and Gallasch, Andreas}, title = {Make a 25 Year old Claw Crane Digital with Thingworx}, subject = {Crane}, language = {en} } @misc{Orsolits, author = {Orsolits, Horst}, title = {Using AR to Build a Digital Twin Robotics Laboratory}, organization = {PTC Academic Session}, subject = {Augmented Reality}, language = {en} } @inproceedings{ChiritaTabakovic, author = {Chirita, Cristian and Tabakovic, Momir}, title = {Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber}, series = {X International Conference Industrial Engineering and Environmental Protection}, booktitle = {X International Conference Industrial Engineering and Environmental Protection}, pages = {143 -- 151}, subject = {Generators}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714}, subject = {Bacteria}, language = {en} } @book{Lackner, author = {Lackner, Maximilian}, title = {Digital Conversion on the Way to Industry 4.0, Selected Papers from ISPR 2020}, publisher = {Springer E-Book}, publisher = {Fachhochschule Technikum Wien}, subject = {Engineering}, language = {en} } @techreport{OrsolitsKorn, author = {Orsolits, Horst and Korn, Alexander}, title = {Augmented Reality basierte Robotik-Lehre}, organization = {Gesellschaft f{\"u}r Informatik e.V., Wettbewerbsband AVRiL 2021}, pages = {8}, abstract = {Diese Arbeit beschreibt eine Augmented Reality (AR) Applikation f{\"u}r den Einsatz in der Hochschullehre zum Thema Industrierobotik. Ziel ist es, sowohl das Lehren als auch das Lernen grundlegender Robotik-Inhalte durch die Bereitstellung einer interaktiven Methode zur Vermittlung der Lehrinhalte f{\"u}r Studierende zu verbessern. Die Studierenden sind in der Lage, direkt mit dem virtuellen Modell eines Industrieroboters zu interagieren und so selbstgesteuert die Lerninhalte zu vertiefen. Diese interaktive Methode verbindet die Studierenden direkt mit den Lehrinhalten und f{\"o}rdert das selbsterforschende Lernen. Eine weitere Anwendungsm{\"o}glichkeit sieht die Kombination einer Lektorenversion der AR Experience mit der Studierendenversion vor. Der Lektor hat die M{\"o}glichkeit, das Modell in AR zu steuern bzw. zu ver{\"a}ndern und die Studierenden k{\"o}nnen auf Ihren Mobilger{\"a}ten die {\"A}nderungen live in AR mitverfolgen, um so auch im Distance Learning eine Verbindung Lektor - Studierende - Inhalt zus{\"a}tzlich zu Videokonferenz-Tools herzustellen.}, subject = {Augmented Reality}, language = {de} } @misc{TabakovicHemis, author = {Tabakovic, Momir and Hemis, Herbert}, title = {Energieversorgungsl{\"o}sungen auf Quartiersebene}, subject = {Energy Systems}, language = {de} } @article{WagnerLackner, author = {Wagner, Isabella and Lackner, Maximilian}, title = {Extraction and Analysis of Natural Rubber from the Latex of Ficus carica, Artocarpus heterophyllus and Polymer Analysis of Durio zibethinus}, series = {Austin Journal of Biotechnology \& Bioengineering}, journal = {Austin Journal of Biotechnology \& Bioengineering}, number = {Vol. 8 (2)}, abstract = {In tropical fruits such as durian (Durio zibethinus) and jackfruit (Artocarpus heterophyllus), only one quarter to one third of the fruit is edible. Finding more ways to industrially use the other components of the fruit can reduce the waste burned or dumped in landfills. Another fruit tree of interest that can also grow in Austria is the fig tree (Ficus carica). Currently, the fruits are the main product of that plant; however, components in the latex of the tree are of interest too. The latex is known to contain natural rubber, which could potentially be used for industrial applications. Jackfruit trees also produce latex, which contains natural rubber. In both cases, the natural rubber has different properties compared to the conventionally used rubber from the rubber tree (Hevea brasiliensis). This could provide new opportunities in various applications. Therefore, the purpose of this research is to analyze the properties of the natural rubber obtained from the jackfruit and fig trees. Additionally, durian fruit also produces a sticky liquid, so the same experiments were also carried out with durian samples. The experimental procedure included extraction with acetone and cyclohexane as well as polymer length determination with gel permeation chromatography and polymer analysis with differential scanning calorimetry. The results show that in both jackfruit and fig tree latex, there is natural rubber of similar polymer length. Durian pulp also contains a polymer; however, with these experiments, it could not be identified. Further research is required to identify the durian polymer and to confirm the results of this experiment.}, subject = {Extraction}, language = {en} } @article{PetrovNeussnerLackner, author = {Petrov, Timothy and Neussner, Wolfgang and Lackner, Maximilian}, title = {Digitalization of the Process Landscape for Proprietary Bond Trading}, series = {Sustainable Future and Technology Development}, journal = {Sustainable Future and Technology Development}, number = {Vol 3, No 6, 2021}, abstract = {On the surface, the process landscape for fixed income securities trading within most banks has changed only slightly in the past four decades. The value chain remains divided amongst front-, middle-, and back office, with IT in support. Front office negotiates deals with customers and other banks, middle office manages risks and reporting, and back office ensures that payments are made in exchange for a transfer of the bonds that have been traded. Though these processes have gradually migrated to electronic mediums, much of the work in all functional areas remains manual. But the advent of digital technologies, primarily process automation software and data integration in an open software architecture, allows banks to dramatically change how the processes along the value chain are carried out. Repetitive and predictable tasks can be performed by automated software, allowing humans to concentrate on complex activities that require flexibility and discretion. Those tasks that remain in the hands of humans can also be made more efficient by extracting data from software applications along the entire process chain and providing them to the human user at the right point in time in the right system.}, subject = {Digitalization}, language = {en} } @inproceedings{KlamertSchmidTraxlerLackner, author = {Klamert-Schmid, Judith and Traxler, Sabine and Lackner, Maximilian}, title = {The Phenomenon Of 'Opportunity Recognition' Among Engineering Student}, series = {24th International Conference on Interactive Collaborative Learning(ICL2021), 22.-24.September 2021, Dresden}, booktitle = {24th International Conference on Interactive Collaborative Learning(ICL2021), 22.-24.September 2021, Dresden}, address = {Dresden}, subject = {Engineering}, language = {en} } @inproceedings{LacknerNovotnyZangletal., author = {Lackner, Maximilian and Novotny, Florian A. and Zangl, Sabine and Lembacher, Harald}, title = {Contribution of waste heat to the anthropogenic greenhouse effect}, series = {2nd International Conference on Environmental Sustainability and Climate Change"}, booktitle = {2nd International Conference on Environmental Sustainability and Climate Change"}, subject = {Sustainability}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Analysis and Optimization of a Thermoelectric Generator as an Electrical Renewable Power Source for Biomass Boilers}, subject = {Generator}, language = {en} } @article{MarklLacknerSchmidetal., author = {Markl, Erich and Lackner, Maximilian and Schmid, Judith and Faast, Thomas}, title = {Mutual Benefits from Entrepreneurship of Non-business University Graduates for Academia and Founders}, series = {International Academic Journal of Entrepreneurship}, journal = {International Academic Journal of Entrepreneurship}, pages = {8}, abstract = {There is a trend among universities to teach entrepreneurship and support startup initiatives. In this article, the state-ofthe- art in entrepreneurship higher education and university ecosystems of non-business schools is reviewed, and the example of the University of Applied Sciences Technikum Wien, Austria, and one of its startup show cases, Toolsense, is elaborated to understand critical success factors for non-business graduates as founders. The mutual benefits for universities and founders are discussed. In the case of Toolsense and the University of Applied Sciences, narrow band IoT as brought to the University by the startup. Implications on a universities' innovation and portfolio management are highlighted. Concerning startups, the importance of growth financing after initial success is elaborated.}, subject = {Entrepreneurship}, language = {en} } @inproceedings{WoeberNovotnyAburaiaetal., author = {W{\"o}ber, Wilfried and Novotny, Georg and Aburaia, Mohamed and Otrebski, Richard and Kubinger, Wilfried}, title = {Estimating a Sparse Representation of Gaussian Processes Using Global Optimization and the Bayesian Information Criterion}, series = {Austrian Robotics Workshop 2018}, booktitle = {Austrian Robotics Workshop 2018}, subject = {Mobile Robotics}, language = {en} } @inproceedings{DannerederEngelhardtNowitzkiMarkletal., author = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane}, title = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control}, series = {Proceedings of the Austrian Robotics Workshop 2018}, booktitle = {Proceedings of the Austrian Robotics Workshop 2018}, subject = {Robotics}, language = {en} } @inproceedings{TabakovicBoecklBergeretal., author = {Tabakovic, Momir and B{\"o}ckl, Benjamin and Berger, Michael A. and Hermis, Herbert and Nauschegg, Daniel and Wall, Johannes}, title = {Energieversorgungsl{\"o}sungen auf Quartiersebene}, series = {World Energy Council Austria Young Energy Professionals}, booktitle = {World Energy Council Austria Young Energy Professionals}, subject = {Energy Systems}, language = {en} } @book{OrsolitsLackner, author = {Orsolits, Horst and Lackner, Maximilian}, title = {Virtual Reality und Augmented Reality in der Digitalen Produktion}, editor = {Lackner, Maximilian and Orsolits, Horst}, publisher = {Springer Gabler}, isbn = {978-3-658-29009-2}, publisher = {Fachhochschule Technikum Wien}, subject = {Virtual Reality}, language = {de} } @inproceedings{GonzalezGutierrezTreitlerSpoerketal., author = {Gonzalez-Gutierrez, Joamin and Treitler, Manuel and Spoerk, Martin and Arbeiter, Florian and Schuschnigg, Stephan and Lammer, Herfried and Lackner, Maximilian and Aburaia, Mohamed and Poszvek, G{\"u}nther and Zhang, Haiguang and Sapkota, Janak and Holzer, Clemes}, title = {Carbon fiber reinforced thermoplastics for material extrusion additive manufacturing}, series = {Conference proceedings of 35th International Conference of the Polymer Processing Society}, booktitle = {Conference proceedings of 35th International Conference of the Polymer Processing Society}, pages = {5}, abstract = {In an effort to broaden the engineering applications of material extrusion based additive manufacturing (MEAM), new materials are being developed. Adding carbon-fibers (CF) has been one strategy to increase the mechanical performance of different thermoplastics. One challenge is to determine the amount of CF needed to increase the mechanical performance without affecting the "printability" of the compounds. In this paper, different amounts (10, 15, and 20 vol.\%) of CF were added to recycled polypropylene (rPP) and polyamide 12 (PA12). A compatibilizer was used for rPP, but not for PA12. Filaments for MEAM were extruded from the different compounds and the viscosity as well as the tensile properties were measured and compared to the processed polymeric matrices. It was observed that the viscosities at the angular frequencies relevant for MEAM (100 to 200 rad/s) were not significantly different for rPP+CF compounds, but it was higher for PA12+CF compounds. As expected, the elongation at break significantly decreased with the addition of CF for all compounds. For the composites with an rPP matrix, the Young's modulus and the ultimate tensile strength (UTS) continuously increased as the CF content increased to 20 vol.\%. For PA12-based materials, the Young's modulus and the UTS increased with CF content, but adding more than 15 vol.\% did not further improve these values. Therefore, it was concluded that for PA12 the maximum amount of CF that should be added was 15 vol.\%. Using scanning electron microscopy, it was observed that the CF were homogeneously dispersed in the rPP matrix, but not so well in the PA12 matrix, with fibers being more concentrated towards the rim of the filament. Finally, filaments of rPP, rPP+20CF, PA12 and PA12+15CF were used to print complex geometries by means of MEAM, and it was observed that CF helped to reduce the warpage compared to the unfilled filaments. A potential application of this phenomenon could be the reduction of the bed temperature to develop a more energy efficient MEAM process for semi-crystalline polymers.}, subject = {Additive Manufacturing}, language = {en} } @article{KlamertSchmidLackner, author = {Klamert-Schmid, Judith and Lackner, Maximilian}, title = {Arbeiten und studieren im Homeoffice}, series = {Alle! Achtung! Das Sicherheitsmagazin der AUVA}, journal = {Alle! Achtung! Das Sicherheitsmagazin der AUVA}, number = {10/2021}, subject = {Home Office}, language = {de} } @incollection{LacknerMarklCermak, author = {Lackner, Maximilian and Markl, Erich and Cermak, Corinna}, title = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail}, series = {Transportation Systems Analysis and Assessment}, booktitle = {Transportation Systems Analysis and Assessment}, publisher = {Fachhochschule Technikum Wien}, abstract = {This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed.}, subject = {Energy}, language = {en} } @incollection{CermakMarklLackner, author = {Cermak, Corinna and Markl, Erich and Lackner, Maximilian}, title = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail}, series = {Transportation}, booktitle = {Transportation}, publisher = {Intech Open}, publisher = {Fachhochschule Technikum Wien}, subject = {Transportation}, language = {en} } @article{ZanglHuseticLackneretal., author = {Zangl, Sabine and Husetic, Mirza and Lackner, Maximilian and Lembacher, Harald}, title = {Sustainability - bringing about a value changes amongst employees}, series = {Techniumscience}, journal = {Techniumscience}, subject = {Sustainability}, language = {en} } @inproceedings{RauerWoeberAburaia, author = {Rauer, Johannes and W{\"o}ber, Wilfried and Aburaia, Mohamed}, title = {An Autonomous Mobile Handling Robot Using Object Recognition}, series = {Proceedings of ARW \& OAGM Workshop 2019}, booktitle = {Proceedings of ARW \& OAGM Workshop 2019}, subject = {Mobile Robotics}, language = {en} } @inproceedings{TabakovicFechner, author = {Tabakovic, Momir and Fechner, Hubert}, title = {Status and outlook for building integrated photovoltaics (BIPV) in relation to educational needs in the BIPV sector}, series = {Proceedings of the 8th International Conference on Sustainability in Energy and Buildings 2016}, booktitle = {Proceedings of the 8th International Conference on Sustainability in Energy and Buildings 2016}, subject = {Photovoltaics}, language = {en} } @misc{TabakovicFechner, author = {Tabakovic, Momir and Fechner, Hubert}, title = {Status and outlook for building integrated photovoltaics (BIPV) in relation to educational needs in the BIPV sector}, subject = {Photovoltaics}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Strom im Wohnbau - Die Zukunft hat begonnen}, subject = {Buildings}, language = {de} } @inproceedings{WoeberAburaiaAburaiaetal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich}, title = {Digital Manufacturing \& Robotics im Department Industrial Engineering}, series = {Konferenz der Mechatronik Plattform Autonome mechatronische Systeme}, booktitle = {Konferenz der Mechatronik Plattform Autonome mechatronische Systeme}, pages = {20 -- 21}, abstract = {Digitalisierung und Automatisierung in produzierender Industrie sind Schlagw{\"o}rter heutiger Forschungsbarbeiten am Department Industrial Engineering der Fachhochschule Technikum Wien. K{\"u}nstliche Intelligenz, vernetzte Sensorsysteme oder {\"u}bergreifende Prozessplanung erm{\"o}glichen Optimierung hinsichtlich Produktionszeit oder Fertigung von individualisierten Produkten, was zur Losgr{\"o}ße 1 f{\"u}hrt. In diesem Dokument werden Forschungst{\"a}tigkeiten des Departments Industrial Engineering im Kontext Vernetzung, Servicerobotik sowie Industrierobotik zusammengefasst.}, subject = {Industrial Engineering}, language = {de} } @misc{WoeberAburaiaKubingeretal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich and Aburaia, Mohamed}, title = {Digital Manufacturing \& Robotics im Department Industrial Engineering}, subject = {Industrial Engineering}, language = {de} } @inproceedings{AburaiaLacknerGruenbichleretal., author = {Aburaia, Mohamed and Lackner, Maximilian and Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lammer, H. and Zhang, Haiguang and Wang, J. and Sapotka, J. and Janics, T. and Hailberger, M.}, title = {Freeform-FDM process development using natural fibre reinforced biopolymers}, series = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK}, booktitle = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK}, subject = {Freeform Printing}, language = {en} } @inproceedings{DannerederPachschwoellAburaiaetal., author = {Dannereder, Florian and Pachschw{\"o}ll, Paul and Aburaia, Mohamed and Markl, Erich and Lackner, Maximilian and Engelhardt-Nowitzki, Corinna and Shooman, Diane}, title = {Development of a 3D-printed Bionic Hand with Muscle- and Force Control}, series = {Austrian Robotics Workshop 2018}, booktitle = {Austrian Robotics Workshop 2018}, subject = {Robotics}, language = {en} } @inproceedings{SchneiderZelgerTabakovic, author = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir}, title = {Combining bottom-up and top-down approaches to converge heterogeneous building data into a homogenous, interactive and expandable energy autonomy platform}, series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, subject = {Energy Autonomy}, language = {en} } @inproceedings{TabakovicvanSarkLouwenetal., author = {Tabakovic, Momir and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Arancon, Sofia and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza}, title = {Development of BIPV courseware for students and professionals}, series = {Proceeding: Austrian PV Conference}, booktitle = {Proceeding: Austrian PV Conference}, subject = {Course Material}, language = {en} } @inproceedings{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversation of waste heat from solid-fuel stove into electric energy using a high temperature thermoelectric generator compared to Bi2Te3 thermoelectric generator}, series = {Proceeding: ISEC 2018}, booktitle = {Proceeding: ISEC 2018}, subject = {Energy Conversion}, language = {en} } @techreport{TabakovicFechnerLeonhartsberger, author = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt}, title = {National Survey Report of PV Power Applications in Austria 2017}, series = {IEA- International Energy Agency}, journal = {IEA- International Energy Agency}, subject = {Photovoltaics}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714}, subject = {Bacteria}, language = {en} } @book{LacknerGrabowStadler, author = {Lackner, Maximilian and Grabow, Wilhelm and Stadler, Philipp}, title = {Handbook of Online and Near-real-time Methods in Microbiology}, publisher = {Fachhochschule Technikum Wien}, subject = {Microbiology}, language = {en} } @article{AaliyaSunoojSriRajkumaretal., author = {Aaliya, Basheer and Sunooj, Kappat Valiyapeediyekkal and Sri Rajkumar, Chillapalli Babu and Navaf, Muhammed and Akhila, Plachikkattu Parambil and Sudheesh, Cherakkathodi and George, Johnsy and Lackner, Maximilian}, title = {Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments}, series = {Polymers}, volume = {13}, journal = {Polymers}, number = {3855}, abstract = {Talipot starch, a non-conventional starch source with a high yield (76\%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P-O-C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4\%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08\%.}, subject = {Talipot starch}, language = {en} } @article{HaasMarklLackner, author = {Haas, Theodor and Markl, Erich and Lackner, Maximilian}, title = {Innovative use of waste tyres: Noise-barriers and geoengineering}, series = {World Journal of Advanced Engineering Technology and Sciences}, journal = {World Journal of Advanced Engineering Technology and Sciences}, subject = {Engineering}, language = {en} } @misc{Lackner, author = {Lackner, Maximilian}, title = {PBAT - A versatile bioplastics}, subject = {Bioplastics}, language = {en} } @incollection{TabakovicOttoCommerelletal., author = {Tabakovic, Momir and Otto, Marc-Oliver and Commerell, Walter and Csapo, Csilla and Vermaak, Herman}, title = {Increase industry cooperation in post graduate education via OpenLab's and MobileLab's in South Africa}, series = {Smart Education and e-Learning 2020}, booktitle = {Smart Education and e-Learning 2020}, publisher = {Springer Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {623 -- 629}, abstract = {This paper will present the concepts of the EURYDICE project funded by the Erasmus + program. Within this project the focus on renewable energies with the overall goal to enhance employability. The energy generation landscape in South Africa is undergoing a fundamental transition, as the vision of the energy strategy is to contribute to an affordable energy for all. This vision will be supported by innovative labs and portals which will be developed within this project. One of the goals is closing the gap between TVET (Technical and Vocational Education and Training Colleges) studies and diploma study by the definition of industrial experience requirements for University of Technology (UoT) diploma students. This leads to an increased preparedness and "studyability" of UoT diploma students. Industrial stakeholders will be integrated into the process. The project will develop an "Industrial Portal" as a working tool. To increase industry cooperation in post graduate education "OpenLabs" and "MobileLabs" will be developed within the project. It is intended that industry brings industrial problems into the "Labs", which will then be solved by the students.}, subject = {Mobile Labs}, language = {en} } @inproceedings{TabakovicWuerflGuerraetal., author = {Tabakovic, Momir and W{\"u}rfl, Marlen and Guerra, Eduardo and Gutleder, Miriam}, title = {Operating models for PV systems in existing residential building complexes in Vienna - challenges and opportunities}, series = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, booktitle = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, abstract = {This paper aims to identify challenges and opportunities that are associated with installing PV (Photovoltaic) systems in existing residential building complexes in Vienna. For this purpose, a project-oriented approach was chosen and hence a representative residential building complex in Vienna was chosen and analyzed to demonstrate the challenges that are associated with such projects. Furthermore, a particular focus lies on exploring different operating models that are available when it comes to the execution of such a project. As this paper builds on the rather novel topic of exploring new operating models for installing PV systems on existing residential building complexes in Vienna, many further suggestions for research can be identified that exceed the scope of this paper.}, subject = {Photovoltaics}, language = {en} } @article{LacknerOuattaraGharaeetal., author = {Lackner, Maximilian and Ouattara, Ibrahim and Gharae, Norouz Ali and Abolhassani, Raymond}, title = {Clean drinking water global scarcity: a review}, series = {Journal of Water Science and Engineering}, journal = {Journal of Water Science and Engineering}, subject = {Water}, language = {en} } @inproceedings{Lackner, author = {Lackner, Maximilian}, title = {Combination of Devulcanization and Reactive Extrusion for Value-Added Rubber Recycling}, series = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, subject = {Recycling}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {International Weeks als Plattformen f{\"u}r l{\"a}nder{\"u}bergreifende Zusammenarbeit}, subject = {Internationalisation}, language = {de} } @article{ZanglPingitzerLembacheretal., author = {Zangl, Sabine and Pingitzer, D. and Lembacher, Harald and Lackner, Maximilian}, title = {Carbon footprint reduction in households using professional services - example of laundry cleaning}, series = {Pubtexto}, journal = {Pubtexto}, subject = {Sustainability}, language = {en} } @book{OrsolitsLackner, author = {Orsolits, Horst and Lackner, Maximilian}, title = {Virtual Reality und Augmented Reality in der Digitalen Produktion}, publisher = {Gabler}, isbn = {978-3-658-29008-5}, publisher = {Fachhochschule Technikum Wien}, subject = {Virtual Reality}, language = {de} } @book{Lackner, author = {Lackner, Maximilian}, title = {Chemical Engineering Vocabulary: Bilingual}, publisher = {Fachhochschule Technikum Wien}, subject = {Chemical Engineering}, language = {en} } @inproceedings{TabakovicSchneiderLaurentetal., author = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegund}, title = {Korneuburgs way2smart - mobility concept, energy platform and social interaction}, series = {Proceedings of the 22nd International Conference on Urban Planning, Regional Development and Information Society (REAL CORP 2017 - PANTA RHEI)}, booktitle = {Proceedings of the 22nd International Conference on Urban Planning, Regional Development and Information Society (REAL CORP 2017 - PANTA RHEI)}, subject = {Energy Market}, language = {en} } @article{SpitzerSonnleitnerKempeLackner, author = {Spitzer-Sonnleitner, Birgit and Kempe, Andre and Lackner, Maximilian}, title = {Influence of halide solutions on collagen networks - measurements of physical properties by atomic force microscopy (AFM)}, series = {Influence of halide solutions on collagen networks}, journal = {Influence of halide solutions on collagen networks}, subject = {Collagen Networks}, language = {en} } @inproceedings{BululukovaWahl, author = {Bululukova, Darya and Wahl, Harald}, title = {Towards a Sustainable Smart Cities Integration in Teaching and Research}, series = {Proceedings of the 4th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS, 101-106, 2015, Lisbon, Portugal}, booktitle = {Proceedings of the 4th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS, 101-106, 2015, Lisbon, Portugal}, subject = {Smart City}, language = {en} } @inproceedings{TabakovicBululukovaWahl, author = {Tabakovic, Momir and Bululukova, Darya and Wahl, Harald}, title = {Smart Cities Education as Mobility, Energy \& ICT Hub}, series = {Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS) 2016}, booktitle = {Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS) 2016}, subject = {Smart City}, language = {de} } @article{GraselBaptistaTragner, author = {Grasel, Bernhard and Baptista, Jos{\´e} and Tragner, Manfred}, title = {Supraharmonic and Harmonic Emissions of a Bi-Directional V2G Electric Vehicle Charging Station and Their Impact to the Grid Impedance}, series = {Energies}, volume = {15}, journal = {Energies}, number = {8}, doi = {10.3390/en15082920}, abstract = {Bidirectional electric vehicle supply equipment and charging stations (EVSE) offer new business models and can provide services to the electrical grid. The smart grid lab in Vienna gives unique testing possibilities of future smart grids, as different type of electrical equipment can be operated at a reconstructed, well-known distribution grid. In this work the harmonic and supraharmonic emissions of a bidirectional EVSE are measured according to IEC61000-4-7 and IEC61000-4-30 Ed3 standard as well as the high-frequency grid impedance. In addition, the efficiency and the power factor are determined at various operating points. Although THDi at nominal power (10 kW) is very low and the efficiency and power factor is very high, at low power levels the opposite situation arise. Supraharmonic emissions remain stable independent of the charging/discharging power, and both wideband and narrowband emissions occur. The additional capacitance when connecting the EVSE impacts the high-frequency grid impedance substantially and generates resonance points.}, subject = {power quality}, language = {en} } @misc{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Peharz, Gerhard and Rechberger, P. and Aichinger, Martin and Moor, D.}, title = {Ringversuch von baugleichen Glas-Glas-BIPV-Elementen unter verschiedenen Klimabedingungen - ein Beitrag {\"O}sterreichs zu IEA PVPS Task 15: „Beschleunigung der Marktdurchdringung von BIPV"}, subject = {Photovoltaics}, language = {de} } @inproceedings{LeonhartsbergerMeiselPicleretal., author = {Leonhartsberger, Kurt and Meisel, M. and Picler, M. and Schidler, Susanne and Fotiadis, Lampros and Xypolytou, E. and Werner, Andrea}, title = {System relevant Applications for Battery Storage Systems}, series = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, booktitle = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, subject = {Battery Storage Systems}, language = {en} } @techreport{BiermayrDissauerEberletal., author = {Biermayr, Peter and Dißauer, Christa and Eberl, Manuela and Enigl, Monika and Fechner, Hubert and Fischer, L. and Leonhartsberger, Kurt and Maringer, F. and Moidl, S. and Schmidl, C. and Strasser, C. and Weiss, W. and Wonisch, P. and Wopienka, E.}, title = {Innovative Energietechnologien in {\"O}sterreich - Marktentwicklung 2018}, series = {BMVIT Schriftenreihe 04/2018}, journal = {BMVIT Schriftenreihe 04/2018}, subject = {Energy Technology}, language = {de} } @inproceedings{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Rechberger, P. and Moor, D. and Aichinger, Martin}, title = {Comparative Performance Measurements of Identical BIPV-Elements in Different Climatic Environments - A Round Robin Action within the IEA PVPS Task 15 Collaboration}, series = {35th European Photovoltaic Solar Energy Conference and Exhibition}, booktitle = {35th European Photovoltaic Solar Energy Conference and Exhibition}, isbn = {3-936338-50-7}, subject = {Photovoltaics}, language = {en} } @article{ZhangYaoMaetal., author = {Zhang, Hang and Yao, Yuan and Ma, Yingxin and Lackner, Maximilian and Jiang, Yunliang}, title = {A 3D printing tool-path generation strategy based on the partition of principal stress field for fused filament fabrication}, series = {The International Journal of Advanced Manufacturing Technology}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {122}, pages = {1719 -- 1735}, abstract = {In order to enhance the strength of 3D-printed parts made of polymer materials and reduce the anisotropy caused by the fused filament fabrication process, this paper proposes an inter-layer interleaved composite path planning method based on the directional partition of the principal stress field. This method not only ensures intra-layer reinforcement under specific working conditions but also increases the strength of the printed part by enhancing the adhesion of adjacent layers through staggered filling between layers. The mechanical performance is improved by 10 to 30\% compared to other conventional filling patterns such as the zigzag filling algorithm. Inter-layer interleaved composite enhancement path planning method is suitable for path planning of structures with complex shapes and is easily integrated into existing general computer-aided engineering processes.}, subject = {Principal stress field}, language = {en} } @article{WoeberCurtoTibihikaetal., author = {W{\"o}ber, Wilfried and Curto, Manuel and Tibihika, Papius D. and Meulenboek, Paul and Alemayehu, Esayas and Mehnen, Lars and Meimberg, Harald and Sykacek, Peter}, title = {Identifying geographically differentiated features of Ethopian Nile tilapia (Oreochromis niloticus) morphology with machine learning}, series = {PlosONE}, volume = {16}, journal = {PlosONE}, number = {4}, subject = {Machine Learning}, language = {en} } @inproceedings{WoeberTibihikaOlaverriMonrealetal., author = {W{\"o}ber, Wilfried and Tibihika, Papius D and Olaverri-Monreal, Cristina and Mehnen, Lars and Sykacek, Peter and Meimberg, Harald}, title = {Comparison of Unsupervised Learning Methods for Natural Image Processing}, series = {Biodiversity Information Science and Standards}, booktitle = {Biodiversity Information Science and Standards}, number = {3}, subject = {Machine Learning}, language = {en} } @inproceedings{WoeberSzuegyiKubingeretal., author = {W{\"o}ber, Wilfried and Szuegyi, Daniel and Kubinger, Wilfried and Mehnen, Lars}, title = {A principal component analysis based object detection for thermal infra-red images}, series = {Proceedings of the 55th International Symposium ELMAR}, booktitle = {Proceedings of the 55th International Symposium ELMAR}, subject = {Principal Component Analysis}, language = {en} } @misc{SpulakOtrebskiKubinger, author = {Spulak, David and Otrebski, Richard and Kubinger, Wilfried}, title = {Object Tracking by Combining Supervised and Adaptive Online Learning through Sensor Fusion of Multiple Stereo Camera Systems}, subject = {Object Tracking}, language = {en} } @article{TaghaviTaghizadehMehmannavazetal., author = {Taghavi, Marziyeh and Taghizadeh, Akbar and Mehmannavaz, Yousef and Hosseinkhani, Ali and Mohammadzadeh, Hamid and Macit, Muhlis and Palangi, Valiollah and Lackner, Maximilian}, title = {Degradability of Vicia ervilia Grain Using In Situ and CNCPS Methods, and Model-Based Analysis of Its Ruminal Degradation}, series = {Fermentation}, volume = {9}, journal = {Fermentation}, number = {5}, doi = {10.3390/fermentation9050419}, abstract = {Using nylon bag techniques, Cornell net carbohydrates and protein systems (CNCPS), and scanning electron microscopy, the authors examined the digestibility and structure of Vicia ervilia (ervil, bitter vetch) after steam flaking, roasting, and microwave processing. During the in situ technique, the samples were incubated at 0, 2, 4, 6, 8, 12, 16, 24, 36, and 48 h. For the description of the ruminal DM (dry matter) and CP (crude protein) degradation kinetics of treated and untreated Vicia ervilia, different models were selected as the best fit for the dry matter (DM) and crude protein (CP) degradation parameters of steam flaked samples. The results showed that both the steam flaking and microwave treatment samples contained high levels of non-protein nitrogen and buffer soluble protein, respectively. In comparison with steam flaking and microwave treatment, roasting decreased and increased the buffer soluble protein and neutral detergent insoluble protein, respectively. The control treatments showed the highest levels of neutral detergent soluble protein and the lowest levels of acid detergent soluble protein. Moreover, steam flaking and roasting decreased and increased the amount of acid detergent insoluble protein, respectively. When using dry heat (microwave and roasting), the acid detergent soluble and insoluble protein fractions were increased. As a result of this experiment, the nitrogen fractions were altered using heat processing. Hence, protein fermented feed and ruminal fermentation conditions can be expressed using these results.}, subject = {Vicia ervilia}, language = {en} } @article{AhmadzadehHosseinkhaniPalangietal., author = {Ahmadzadeh, Leila and Hosseinkhani, Ali and Palangi, Valiollah and Lackner, Maximilian}, title = {Supplementary Feed Additives Can Improve Lamb Performance in Terms of Birth Weight, Body Size, and Survival Rate}, series = {Animals}, journal = {Animals}, number = {13 / 6}, doi = {10.3390/ani13060993}, subject = {feed restriction}, language = {en} } @inproceedings{WoeberAburaiaOlaverriMonreal, author = {W{\"o}ber, Wilfried and Aburaia, Mohamed and Olaverri-Monreal, Cristina}, title = {Classification of Streetsigns Using Gaussian Process Latent Variable Models}, series = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria}, booktitle = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria}, subject = {Streetsigns}, language = {en} } @article{SattingerPapaStujaetal., author = {Sattinger, Vinzenz and Papa, Maximilian and Stuja, Kemajl and Kubinger, Wilfried}, title = {Methodik zur Entwicklung sicherer kollaborativer Produktionssysteme im Rahmen von Industrie 4.0}, series = {e \& i Elektrotechnik und Informationstechnik}, journal = {e \& i Elektrotechnik und Informationstechnik}, subject = {Robotics}, language = {de} } @inproceedings{TabakovicBululukovaWahl, author = {Tabakovic, Momir and Bululukova, Darya and Wahl, Harald}, title = {Integrative Secondary Education Programmes and Research in Smart Cities Context}, series = {Proceedings of the REAL CORP 2016}, booktitle = {Proceedings of the REAL CORP 2016}, subject = {Smart City}, language = {en} } @article{MuehleisenEderVoronkoetal., author = {Muehleisen, Wolfgang and Eder, Gabriele C. and Voronko, Yuliya and Spielberger, Markus and Sonnleitner, Horst and Kn{\"o}bl, Karl and Ebner, Rita and Ujvari, Guszt{\´a}v and Hirschl, Christina}, title = {Outdoor detection and visualization of hailstorm damages of photovoltaic plants}, series = {Renewable Energy}, journal = {Renewable Energy}, number = {118}, pages = {138 -- 145}, subject = {Photovoltaics}, language = {en} } @inproceedings{PapaKaselautzkeRadingeretal., author = {Papa, Maximilian and Kaselautzke, David and Radinger, Thomas and Stuja, Kemajl}, title = {Development of a safety industry 4.0 production environment}, series = {28th DAAAM International Symposium on Intelligent Manufacturing and Automation}, booktitle = {28th DAAAM International Symposium on Intelligent Manufacturing and Automation}, subject = {Saftey}, language = {en} } @book{LacknerChenSuzuki, author = {Lackner, Maximilian and Chen, Wei-Ying, and Suzuki, Toshio}, title = {Handbook of Climate Change Mitigation and Adaptation}, publisher = {Fachhochschule Technikum Wien}, subject = {Climate Change}, language = {en} } @inproceedings{AngelOrsolitsGarcia, author = {Angel, Nikolaus and Orsolits, Horst and Garcia, Jose}, title = {Developing an AR Based Tool for Teaching Motion Analysis on Assembly Tasks}, series = {2022 8th International Conference of the Immersive Learning Research Network (iLRN), 2022}, booktitle = {2022 8th International Conference of the Immersive Learning Research Network (iLRN), 2022}, isbn = {978-1-7348-9952-8}, doi = {10.23919/iLRN55037.2022.9815914}, pages = {7}, abstract = {Engineering education courses look into processes, equipment and people in order to prepare students to tackle problems in their careers. In manufacturing industry, it is important to use virtual manufacturing tools to analyse processes. This includes both equipment and people. Assembly operations can involve human operators. Modular arrangements of predetermined time standards MODAPTS is a predetermined motion time system method used to analyse assembly processes. Augmented reality (AR) is increasingly being used for industrial processes as well as in education. AR application have been used for maintenance training as a useful way to overly digital instructions to a trainee whilst being able to look at a real object. This is potential beneficial for education. This paper presents the evaluation of a prototype to test a predetermined time standards model using an AR application. An evaluation was carried out comparing AR-based instructions in tablet and PC monitor and paper-written instructions. The results of evaluating the prototype encourage their use as an educational tool in engineering courses.}, subject = {Augmented Reality}, language = {en} }