@article{RauerKroissKryvinskaetal.,
  author    = {Rauer, Johannes Nikolaus and Kroiss, Michael and Kryvinska, Natalia and Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed},
  title     = {Cross-university virtual teamwork as a means of internationalization at home},
  series = {The International Journal of Management Education, Volume 19, Issue 3},
  journal   = {The International Journal of Management Education, Volume 19, Issue 3},
  number    = {Issue 3},
  subject      = {Virtual Teamwork},
  language  = {en}
}
@inproceedings{TabakovicCsapo,
  author    = {Tabakovic, Momir and Csapo, Csilla},
  title     = {Industry - University cooperation in the renewable energy field in south Africa- Gap analysis and enhancement proposals},
  series = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz},
  booktitle = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz},
  subject      = {Renewable Energies},
  language  = {en}
}
@inproceedings{ValckenborgBergerUjvarietal.,
  author    = {Valckenborg, Roland and Berger, Karl A. and {\´U}jv{\´a}ri, Guszt{\´a}v and Eder, Gabriele C. and Gaisberger, Lukas and Tabakovic, Momir and Polo Lopez, Christina S. and Boddaert, Simon and del Buono, Matteo and Mart{\´i}n Chivelet, Nuria and Sanz Martinez, Asier and Kim, Jun-Tae and Gerd Imenes, Anne},
  title     = {COMPARISON OF IEC 61853-1 MATRIX EVALUATIONS BASED ON INDOOR AND OUTDOOR MEASUREMENT DATA FROM PVPS TASK 15 BIPV ROUND-ROBIN},
  series = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021},
  booktitle = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021},
  subject      = {Measurement},
  language  = {en}
}
@inproceedings{SchwaigerAburaiaAburaiaetal.,
  author    = {Schwaiger, Simon and Aburaia, Mohamed and Aburaia, Ali and W{\"o}ber, Wilfried},
  title     = {Explainable Artificial Intelligence for Robot Arm Control},
  series = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna},
  volume    = {32},
  booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna},
  number    = {1},
  pages     = {0640 -- 0647},
  subject      = {Artificial Intelligence},
  language  = {en}
}
@article{LacknerLutzHribernig,
  author    = {Lackner, Maximilian and Lutz, Markus and Hribernig, Thomas},
  title     = {Neuartiges Verfahren zum L{\"o}schen von Metallbr{\"a}nden mit Zelluloseflakes},
  series = {Feuerwehr Fachjournal},
  journal   = {Feuerwehr Fachjournal},
  number    = {September 2021},
  pages     = {54},
  subject      = {Extinguisher},
  language  = {de}
}
@book{WalaEllingerFranzetal.,
  author    = {Wala, Thomas and Ellinger, Florian and Franz, Peter and Kriz, Agnes and Zangl, Sabine and Sohm, Kurt and Tabakovic, Momir and Gollner, Helmut and Adams, Mark and Litzenberger, Stefan},
  title     = {Internationalisierung von Fachhochschulstudieng{\"a}ngen.: Ideen, Konzepte \& Erfahrungsberichte},
  publisher = {Independently Published},
  isbn      = {ISBN-13 : ‎979-8650872184},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Internationalisation},
  language  = {en}
}
@inproceedings{AbdankAburaiaWoeber,
  author    = {Abdank, Moritz and Aburaia, Mohamed and W{\"o}ber, Wilfried},
  title     = {Using-Colour-Based Object Detection for Pick and Place Applications},
  series = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna},
  volume    = {32},
  booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna},
  number    = {1},
  pages     = {0536 -- 0541},
  subject      = {Computer Vision},
  language  = {en}
}
@inproceedings{ChiritaTabakovic,
  author    = {Chirita, Cristian and Tabakovic, Momir},
  title     = {Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber},
  series = {X International Conference Industrial Engineering and Environmental Protection},
  booktitle = {X International Conference Industrial Engineering and Environmental Protection},
  pages     = {143 -- 151},
  subject      = {Generators},
  language  = {en}
}
@techreport{OrsolitsKorn,
  author    = {Orsolits, Horst and Korn, Alexander},
  title     = {Augmented Reality basierte Robotik-Lehre},
  organization    = {Gesellschaft f{\"u}r Informatik e.V., Wettbewerbsband AVRiL 2021},
  pages     = {8},
  abstract  = {Diese Arbeit beschreibt eine Augmented Reality (AR) Applikation f{\"u}r den Einsatz in der Hochschullehre zum Thema Industrierobotik. Ziel ist es, sowohl das Lehren als auch das Lernen grundlegender Robotik-Inhalte durch die Bereitstellung einer interaktiven Methode zur Vermittlung der Lehrinhalte f{\"u}r Studierende zu verbessern. Die Studierenden sind in der Lage, direkt mit dem virtuellen Modell eines Industrieroboters zu interagieren und so selbstgesteuert die Lerninhalte zu vertiefen. Diese interaktive Methode verbindet die Studierenden direkt mit den Lehrinhalten und f{\"o}rdert das selbsterforschende Lernen. Eine weitere Anwendungsm{\"o}glichkeit sieht die Kombination einer Lektorenversion der AR Experience mit der Studierendenversion vor. Der Lektor hat die M{\"o}glichkeit, das Modell in AR zu steuern bzw. zu ver{\"a}ndern und die Studierenden k{\"o}nnen auf Ihren Mobilger{\"a}ten die {\"A}nderungen live in AR mitverfolgen, um so auch im Distance Learning eine Verbindung Lektor - Studierende - Inhalt zus{\"a}tzlich zu Videokonferenz-Tools herzustellen.},
  subject      = {Augmented Reality},
  language  = {de}
}
@misc{TabakovicHemis,
  author    = {Tabakovic, Momir and Hemis, Herbert},
  title     = {Energieversorgungsl{\"o}sungen auf Quartiersebene},
  subject      = {Energy Systems},
  language  = {de}
}
@article{WagnerLackner,
  author    = {Wagner, Isabella and Lackner, Maximilian},
  title     = {Extraction and Analysis of Natural Rubber from the Latex of Ficus carica, Artocarpus heterophyllus and Polymer Analysis of Durio zibethinus},
  series = {Austin Journal of Biotechnology \& Bioengineering},
  journal   = {Austin Journal of Biotechnology \& Bioengineering},
  number    = {Vol. 8 (2)},
  abstract  = {In tropical fruits such as durian (Durio zibethinus) and jackfruit (Artocarpus heterophyllus), only one quarter to one third of the fruit is edible. Finding more ways to industrially use the other components of the fruit can reduce the waste burned or dumped in landfills. Another fruit tree of interest that can also grow in Austria is the fig tree (Ficus carica). Currently, the fruits are the main product of that plant; however, components in the latex of the tree are of interest too. The latex is known to contain natural rubber, which could potentially be used for industrial applications. Jackfruit trees also produce latex, which contains natural rubber. In both cases, the natural rubber has different properties compared to the conventionally used rubber from the rubber tree (Hevea brasiliensis). This could provide new opportunities in various applications. Therefore, the purpose of this research is to analyze the properties of the natural rubber obtained from the jackfruit and fig trees. Additionally, durian fruit also produces a sticky liquid, so the same experiments were also carried out with durian samples. The experimental procedure included extraction with acetone and cyclohexane as well as polymer length determination with gel permeation chromatography and polymer analysis with differential scanning calorimetry. The results show that in both jackfruit and fig tree latex, there is natural rubber of similar polymer length. Durian pulp also contains a polymer; however, with these experiments, it could not be identified. Further research is required to identify the durian polymer and to confirm the results of this experiment.},
  subject      = {Extraction},
  language  = {en}
}
@article{PetrovNeussnerLackner,
  author    = {Petrov, Timothy and Neussner, Wolfgang and Lackner, Maximilian},
  title     = {Digitalization of the Process Landscape for Proprietary Bond Trading},
  series = {Sustainable Future and Technology Development},
  journal   = {Sustainable Future and Technology Development},
  number    = {Vol 3, No 6, 2021},
  abstract  = {On the surface, the process landscape for fixed income securities trading within most banks has changed only slightly in the past four decades. The value chain remains divided amongst front-, middle-, and back office, with IT in support. Front office negotiates deals with customers and other banks, middle office manages risks and reporting, and back office ensures that payments are made in exchange for a transfer of the bonds that have been traded. Though these processes have gradually migrated to electronic mediums, much of the work in all functional areas remains manual. But the advent of digital technologies, primarily process automation software and data integration in an open software architecture, allows banks to dramatically change how the processes along the value chain are carried out. Repetitive and predictable tasks can be performed by automated software, allowing humans to concentrate on complex activities that require flexibility and discretion. Those tasks that remain in the hands of humans can also be made more efficient by extracting data from software applications along the entire process chain and providing them to the human user at the right point in time in the right system.},
  subject      = {Digitalization},
  language  = {en}
}
@inproceedings{KlamertSchmidTraxlerLackner,
  author    = {Klamert-Schmid, Judith and Traxler, Sabine and Lackner, Maximilian},
  title     = {The Phenomenon Of 'Opportunity Recognition' Among Engineering Student},
  series = {24th International Conference on Interactive Collaborative Learning(ICL2021), 22.-24.September 2021, Dresden},
  booktitle = {24th International Conference on Interactive Collaborative Learning(ICL2021), 22.-24.September 2021, Dresden},
  address   = {Dresden},
  subject      = {Engineering},
  language  = {en}
}
@inproceedings{TabakovicBoecklBergeretal.,
  author    = {Tabakovic, Momir and B{\"o}ckl, Benjamin and Berger, Michael A. and Hermis, Herbert and Nauschegg, Daniel and Wall, Johannes},
  title     = {Energieversorgungsl{\"o}sungen auf Quartiersebene},
  series = {World Energy Council Austria Young Energy Professionals},
  booktitle = {World Energy Council Austria Young Energy Professionals},
  subject      = {Energy Systems},
  language  = {en}
}
@article{KlamertSchmidLackner,
  author    = {Klamert-Schmid, Judith and Lackner, Maximilian},
  title     = {Arbeiten und studieren im Homeoffice},
  series = {Alle! Achtung! Das Sicherheitsmagazin der AUVA},
  journal   = {Alle! Achtung! Das Sicherheitsmagazin der AUVA},
  number    = {10/2021},
  subject      = {Home Office},
  language  = {de}
}
@article{AaliyaSunoojSriRajkumaretal.,
  author    = {Aaliya, Basheer and Sunooj, Kappat Valiyapeediyekkal and Sri Rajkumar, Chillapalli Babu and Navaf, Muhammed and Akhila, Plachikkattu Parambil and Sudheesh, Cherakkathodi and George, Johnsy and Lackner, Maximilian},
  title     = {Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments},
  series = {Polymers},
  volume    = {13},
  journal   = {Polymers},
  number    = {3855},
  abstract  = {Talipot starch, a non-conventional starch source with a high yield (76\%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P-O-C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4\%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08\%.},
  subject      = {Talipot starch},
  language  = {en}
}
@article{HaasMarklLackner,
  author    = {Haas, Theodor and Markl, Erich and Lackner, Maximilian},
  title     = {Innovative use of waste tyres: Noise-barriers and geoengineering},
  series = {World Journal of Advanced Engineering Technology and Sciences},
  journal   = {World Journal of Advanced Engineering Technology and Sciences},
  subject      = {Engineering},
  language  = {en}
}
@inproceedings{TabakovicWuerflGuerraetal.,
  author    = {Tabakovic, Momir and W{\"u}rfl, Marlen and Guerra, Eduardo and Gutleder, Miriam},
  title     = {Operating models for PV systems in existing residential building complexes in Vienna - challenges and opportunities},
  series = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)},
  booktitle = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)},
  abstract  = {This paper aims to identify challenges and opportunities that are associated with installing PV (Photovoltaic) systems in existing residential building complexes in Vienna. For this purpose, a project-oriented approach was chosen and hence a representative residential building complex in Vienna was chosen and analyzed to demonstrate the challenges that are associated with such projects. Furthermore, a particular focus lies on exploring different operating models that are available when it comes to the execution of such a project. As this paper builds on the rather novel topic of exploring new operating models for installing PV systems on existing residential building complexes in Vienna, many further suggestions for research can be identified that exceed the scope of this paper.},
  subject      = {Photovoltaics},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {International Weeks als Plattformen f{\"u}r l{\"a}nder{\"u}bergreifende Zusammenarbeit},
  subject      = {Internationalisation},
  language  = {de}
}
@article{WoeberCurtoTibihikaetal.,
  author    = {W{\"o}ber, Wilfried and Curto, Manuel and Tibihika, Papius D. and Meulenboek, Paul and Alemayehu, Esayas and Mehnen, Lars and Meimberg, Harald and Sykacek, Peter},
  title     = {Identifying geographically differentiated features of Ethopian Nile tilapia (Oreochromis niloticus) morphology with machine learning},
  series = {PlosONE},
  volume    = {16},
  journal   = {PlosONE},
  number    = {4},
  subject      = {Machine Learning},
  language  = {en}
}