@inproceedings{LeonhartsbergerPremmSchidleretal., author = {Leonhartsberger, Kurt and Premm, C. and Schidler, Susanne and Werner, Andrea and Moisl, F.}, title = {Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks f{\"u}r netz- und systemdienliche Anwendungen}, series = {Tagungsband PV-Symposium 2018}, booktitle = {Tagungsband PV-Symposium 2018}, subject = {Photovoltaics}, language = {de} } @inproceedings{WernerLeonhartsbergerSchidleretal., author = {Werner, Andrea and Leonhartsberger, Kurt and Schidler, Susanne and Galhaup, Michael}, title = {Innovation durch Kompetenzerweiterung - Der Nutzen des kooperativen Innovationslehrganges "smart(D)ER" f{\"u}r Unternehmen im T{\"a}tigkeitsfeld der dezentralen erneuerbaren Energiesysteme}, series = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018}, booktitle = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018}, subject = {Wind Power}, language = {de} } @misc{LeonhartsbergerPremmSchidleretal., author = {Leonhartsberger, Kurt and Premm, C. and Schidler, Susanne and Werner, Andrea and Moisl, F.}, title = {Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks f{\"u}r netz- und systemdienliche Anwendungen}, subject = {Photovoltaics}, language = {de} } @misc{LeiboldZelger, author = {Leibold, Jens and Zelger, Thomas}, title = {Projekt SC- Mikroquartiere - Modellierung verschiedener Nachverdichtungsszenarien und Optimierung bez{\"u}glich erneuerbarer Energieversorgung und der Lebensqualit{\"a}t der NutzerInnen}, subject = {Renewable Energy}, language = {de} } @article{MolinSchneiderRohdinetal., author = {Molin, Andreas and Schneider, Simon and Rohdin, Patrik and Moshfegh, Bahram}, title = {Assessing a regional building applied PV potential - Spatial and dynamic analysis of supply and load matching}, series = {Renewable Energy 91}, volume = {2016}, journal = {Renewable Energy 91}, number = {91}, pages = {261 -- 274}, subject = {Renewable Energy}, language = {en} } @article{SchidlerAdensamDaRocha, author = {Schidler, Susanne and Adensam, Heidi and Da Rocha, K.}, title = {Berufliche Qualifizierung im Umweltsektor mit Schwerpunkt Erneuerbare Energien / Neue Energietechnologien unter antizipierender Ber{\"u}cksichtigung des Nationalen Qualifikationsrahmens (NQR). Schwerpunkt: Integration von Nachhaltigkeitsaspekten}, series = {AMS Foschungsnetz / AMS INFO 160 / Arbeitsmarktservice {\"O}sterreich}, journal = {AMS Foschungsnetz / AMS INFO 160 / Arbeitsmarktservice {\"O}sterreich}, subject = {Professional Qualification}, language = {de} } @article{Schidler, author = {Schidler, Susanne}, title = {Nachhaltige Entwicklung - Beispiele aus dem Bereich Erneuerbare Rohstoffe / Energien}, series = {AMS Forschungsnetzwerk / Arbeitsmarktservice {\"O}sterreich, Abt. Arbeitsmarktforschung und Berufsinformation / AMS INFO}, journal = {AMS Forschungsnetzwerk / Arbeitsmarktservice {\"O}sterreich, Abt. Arbeitsmarktforschung und Berufsinformation / AMS INFO}, subject = {Sustainability}, language = {de} } @phdthesis{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversion of waste heat into electric energy by thermoelectric generators}, school = {Fachhochschule Technikum Wien}, abstract = {The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber.}, subject = {Energy Technologies}, language = {en} } @inproceedings{ChiritaTabakovic, author = {Chirita, Cristian and Tabakovic, Momir}, title = {Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber}, series = {X International Conference Industrial Engineering and Environmental Protection}, booktitle = {X International Conference Industrial Engineering and Environmental Protection}, pages = {143 -- 151}, subject = {Generators}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Analysis and Optimization of a Thermoelectric Generator as an Electrical Renewable Power Source for Biomass Boilers}, subject = {Generator}, language = {en} } @incollection{TabakovicOttoCommerelletal., author = {Tabakovic, Momir and Otto, Marc-Oliver and Commerell, Walter and Csapo, Csilla and Vermaak, Herman}, title = {Increase industry cooperation in post graduate education via OpenLab's and MobileLab's in South Africa}, series = {Smart Education and e-Learning 2020}, booktitle = {Smart Education and e-Learning 2020}, publisher = {Springer Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {623 -- 629}, abstract = {This paper will present the concepts of the EURYDICE project funded by the Erasmus + program. Within this project the focus on renewable energies with the overall goal to enhance employability. The energy generation landscape in South Africa is undergoing a fundamental transition, as the vision of the energy strategy is to contribute to an affordable energy for all. This vision will be supported by innovative labs and portals which will be developed within this project. One of the goals is closing the gap between TVET (Technical and Vocational Education and Training Colleges) studies and diploma study by the definition of industrial experience requirements for University of Technology (UoT) diploma students. This leads to an increased preparedness and "studyability" of UoT diploma students. Industrial stakeholders will be integrated into the process. The project will develop an "Industrial Portal" as a working tool. To increase industry cooperation in post graduate education "OpenLabs" and "MobileLabs" will be developed within the project. It is intended that industry brings industrial problems into the "Labs", which will then be solved by the students.}, subject = {Mobile Labs}, language = {en} } @inproceedings{TabakovicWuerflGuerraetal., author = {Tabakovic, Momir and W{\"u}rfl, Marlen and Guerra, Eduardo and Gutleder, Miriam}, title = {Operating models for PV systems in existing residential building complexes in Vienna - challenges and opportunities}, series = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, booktitle = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, abstract = {This paper aims to identify challenges and opportunities that are associated with installing PV (Photovoltaic) systems in existing residential building complexes in Vienna. For this purpose, a project-oriented approach was chosen and hence a representative residential building complex in Vienna was chosen and analyzed to demonstrate the challenges that are associated with such projects. Furthermore, a particular focus lies on exploring different operating models that are available when it comes to the execution of such a project. As this paper builds on the rather novel topic of exploring new operating models for installing PV systems on existing residential building complexes in Vienna, many further suggestions for research can be identified that exceed the scope of this paper.}, subject = {Photovoltaics}, language = {en} } @misc{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Peharz, Gerhard and Rechberger, P. and Aichinger, Martin and Moor, D.}, title = {Ringversuch von baugleichen Glas-Glas-BIPV-Elementen unter verschiedenen Klimabedingungen - ein Beitrag {\"O}sterreichs zu IEA PVPS Task 15: „Beschleunigung der Marktdurchdringung von BIPV"}, subject = {Photovoltaics}, language = {de} }