@inproceedings{AmbroschRinnerthalerKubinger,
  author    = {Ambrosch, Roland and Rinnerthaler, Franz and Kubinger, Wilfried},
  title     = {Building an autonomous, mobile demonstration platform for embedded vision applications},
  series = {Annals of DAAAM / Proceeding of the 17th International DAAAM Symposium "Intelligent Manufacturing \& Automation: Focus on Mechtronics and Robotics"},
  booktitle = {Annals of DAAAM / Proceeding of the 17th International DAAAM Symposium "Intelligent Manufacturing \& Automation: Focus on Mechtronics and Robotics"},
  isbn      = {3-901509-57-7},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{LeonhartsbergerPremmSchidleretal.,
  author    = {Leonhartsberger, Kurt and Premm, C. and Schidler, Susanne and Werner, Andrea and Moisl, F.},
  title     = {Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks f{\"u}r netz- und systemdienliche Anwendungen},
  series = {Tagungsband PV-Symposium 2018},
  booktitle = {Tagungsband PV-Symposium 2018},
  subject      = {Photovoltaics},
  language  = {de}
}
@inproceedings{StujaPoszvekMarkletal.,
  author    = {Stuja, Kemajl and Poszvek, G{\"u}nther and Markl, Erich and Aburaia, Mohamed},
  title     = {Design and Optimization of Pumping Aggregate for Hydraulic Active Car Suspension using Software SolidWorks},
  series = {26TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  booktitle = {26TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  abstract  = {This work represents the design and performance optimization of pumping aggregate for hydraulic active car suspension systems. For solving of this task is required wide scope of interdisciplinary knowledge. The software used in this project was SolidWorks from Dassault Systemes. Using this tool is possible to analyse and optimize the flow of hydraulic fluid throw the electromotor of pumping aggregate. This papers shows among other, how to set the input parameters and constraints such as pressure and velocity, how to simulate a rotating flow of cooling fluid inside intermediate regions between stator and rotor. For approving a required lifetime of pumping aggregate a fatigue analysis was done and represented above. The verification of simulation model and mandatory validation of simulation results are made. The conclusions at the end of this work have confirmed the usage of computational fluid dynamic - software for future researches of pumping aggregates.},
  subject      = {Hydraulic},
  language  = {en}
}
@inproceedings{EngelhardtNowitzkiAburaia,
  author    = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed},
  title     = {Towards intelligent Manufacturing - Die Digitale Fabrik der FH Technikum Wien als Plattform f{\"u}r Ausbildung und angewandte Forschung},
  series = {Konferenz der Mechatronik-Plattform: Smart Factory FH Technikum Wien 2016},
  booktitle = {Konferenz der Mechatronik-Plattform: Smart Factory FH Technikum Wien 2016},
  subject      = {Manufacturing},
  language  = {en}
}
@inproceedings{SchweidlerAburaiaEngelhardtNowitzki,
  author    = {Schweidler, Rene and Aburaia, Mohamed and Engelhardt-Nowitzki, Corinna},
  title     = {Design of an Industrial Robot with Six Degrees of Freedom for Educational Purposes},
  series = {OAGM \& ARW JOINT WORKSHOP ON "COMPUTER VISION AND ROBOTICS},
  booktitle = {OAGM \& ARW JOINT WORKSHOP ON "COMPUTER VISION AND ROBOTICS},
  subject      = {Industrial},
  language  = {en}
}
@inproceedings{Leonhartsberger,
  author    = {Leonhartsberger, Kurt},
  title     = {SPIN.OFF - SPeicherINtegration in das B{\"u}ro(OFFice)geb{\"a}ude FutureBase},
  series = {Fachtagung Energietage 2018: Netzstabilit{\"a}t der Zukunft},
  booktitle = {Fachtagung Energietage 2018: Netzstabilit{\"a}t der Zukunft},
  subject      = {Integration},
  language  = {de}
}
@inproceedings{KomendaMalisa,
  author    = {Komenda, Titanilla and Malisa, Viktorio},
  title     = {Implementation of the ECTS-barometer to illustrate course achievement using the Master degree program Mechatronics/Robotics as a model},
  series = {Proceedings of the Joint International IGIP-SEFI Annual Conference 2010, At Trnava},
  booktitle = {Proceedings of the Joint International IGIP-SEFI Annual Conference 2010, At Trnava},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{MalisaHieger,
  author    = {Malisa, Viktorio and Hieger, Christof},
  title     = {Graphical Analysis about the Definition of Mechatronics},
  series = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium},
  booktitle = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium},
  isbn      = {978-3-901509-70-4},
  issn      = {1726-9679},
  pages     = {1845 -- 1847},
  subject      = {Mechatronic},
  language  = {en}
}
@inproceedings{HauerMalisaHiegeretal.,
  author    = {Hauer, Stefan and Malisa, Viktorio and Hieger, Christof and Stuja, Kemajl},
  title     = {Design and simulation of modular robot work cells},
  series = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium, Vienna (Austria)},
  booktitle = {Annals of DAAAM for 2009 \& Proceedings of the 20th International DAAAM Symposium, Vienna (Austria)},
  isbn      = {978-3-901509-70-4},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{HesseMalisaHieger,
  author    = {Hesse, Stefan and Malisa, Viktorio and Hieger, Christof},
  title     = {Feedback zum Taschenbuch: Robotik - Montage - Handhabung},
  series = {Tagungsband des 7. Fachkolloquiums f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE), Wien},
  booktitle = {Tagungsband des 7. Fachkolloquiums f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE), Wien},
  isbn      = {978-3-902759-00-9},
  pages     = {113 -- 116},
  subject      = {Robotics},
  language  = {de}
}
@inproceedings{SchneiderZelgerLaurent,
  author    = {Schneider, Simon and Zelger, Thomas and Laurent, Pierre},
  title     = {Energy Building Stock Simulation and Planning for Small Municipalities - A Web-based Urban Energy System Model for Potential Analysis and Citizen Participation},
  series = {Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS},
  booktitle = {Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS},
  address   = {Funchal, Madeira},
  subject      = {Energy},
  language  = {en}
}
@inproceedings{OtrebskiPospisilEngelhardtNowitzkietal.,
  author    = {Otrebski, Richard and Pospisil, Dominik and Engelhardt-Nowitzki, Corinna and Kryvinska, Natalia and Aburaia, Mohamed},
  title     = {Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling},
  series = {The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada},
  booktitle = {The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada},
  pages     = {7},
  abstract  = {Cyberphysical production systems are an important part of today's manufacturing process. The ever-growing need of highly optimized, i.e. at the same time flexible and e� cient systems, requires the use of not only appropriate machines, but as well a communication framework and data model that is manufacturer independent and scalable. This paper proposes a communicationframework based on OPC UA that employs an agent-based architecture. The proposed system has been implemented and tested in the Digital Factory of the UAS Technikum Wien. It shows promising behavior within distributed manufacturing systems.},
  subject      = {Digital Manufacturing},
  language  = {en}
}
@inproceedings{EngelhardtNowitzkiAburaiaMarkl,
  author    = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Markl, Erich},
  title     = {Smart Manufacturing in the Digital Factory - a Practical Case Study of an Industrie 4.0 Implementation},
  series = {EUROCAST 2017, Sixteenth International Conference on Computer Aided Systems Theory},
  booktitle = {EUROCAST 2017, Sixteenth International Conference on Computer Aided Systems Theory},
  subject      = {Smart Manufacturing},
  language  = {en}
}
@inproceedings{StujaMirlindMarkletal.,
  author    = {Stuja, Kemajl and Mirlind, Brugi and Markl, Erich and Aburaia, Mohamed},
  title     = {Lightweight Educational Scara Robot for Palletizing of USB Sticks},
  series = {Proceedings of the 27th International DAAAM Symposium 2016, DAAAM 2017},
  booktitle = {Proceedings of the 27th International DAAAM Symposium 2016, DAAAM 2017},
  subject      = {Education},
  language  = {en}
}
@inproceedings{StujaPoszvekWoelfeletal.,
  author    = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich},
  title     = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems},
  series = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  booktitle = {29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION},
  isbn      = {978-3-902734-20-4},
  issn      = {1726-9679},
  subject      = {Industrial Security},
  language  = {en}
}
@inproceedings{PapaKaselautzkeStujaetal.,
  author    = {Papa, Maximilian and Kaselautzke, David and Stuja, Kemajl and W{\"o}lfel, Walter},
  title     = {Different safety certifiable concepts for mobile robots in industrial environments},
  series = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation},
  booktitle = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation},
  subject      = {Saftey},
  language  = {en}
}
@inproceedings{StujaPoszvekWoelfeletal.,
  author    = {Stuja, Kemajl and Poszvek, G{\"u}nther and W{\"o}lfel, Walter and Markl, Erich},
  title     = {Integrated Method for the Design and Evaluation of Safety \& Secure Manufacturing Systems},
  series = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation},
  booktitle = {29th DAAAM International Symposium on Intelligent Manufacturing and Automation},
  subject      = {Saftey},
  language  = {en}
}
@inproceedings{Aburaia,
  author    = {Aburaia, Mohamed},
  title     = {A Low-cost mini Robot Manipulator for Education purpose},
  series = {Proceedings Austrian Robotics Workshop 2015},
  booktitle = {Proceedings Austrian Robotics Workshop 2015},
  subject      = {Robot},
  language  = {en}
}
@inproceedings{WernerLeonhartsbergerSchidleretal.,
  author    = {Werner, Andrea and Leonhartsberger, Kurt and Schidler, Susanne and Galhaup, Michael},
  title     = {Innovation durch Kompetenzerweiterung - Der Nutzen des kooperativen Innovationslehrganges "smart(D)ER" f{\"u}r Unternehmen im T{\"a}tigkeitsfeld der dezentralen erneuerbaren Energiesysteme},
  series = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018},
  booktitle = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018},
  subject      = {Wind Power},
  language  = {de}
}
@inproceedings{LeonhartsbergerMeiselPichleretal.,
  author    = {Leonhartsberger, Kurt and Meisel, Markus and Pichler, Mario and Schidler, Susanne and Fotiadis, Lampros and Xypolytou, Evangelia and Werner, Andrea},
  title     = {System relevant Applications for Battery Storage Systems},
  series = {Proceedings of the 33rd PLEA International Conference "Design to Thrive"},
  booktitle = {Proceedings of the 33rd PLEA International Conference "Design to Thrive"},
  pages     = {4595 -- 4602},
  subject      = {Battery Storage},
  language  = {en}
}