@techreport{LeonhartsbergerPeppoloni,
  author    = {Leonhartsberger, Kurt and Peppoloni, Mauro},
  title     = {Small Wind Power in Austria},
  organization    = {WWEA},
  subject      = {Wind Power},
  language  = {en}
}
@misc{Maul,
  author    = {Maul, Lukas},
  title     = {Bauwerksintegrierte Photovoltaik - Technologie, Entwicklung, Herausforderung},
  subject      = {Photovoltaics},
  language  = {de}
}
@misc{Schidler,
  author    = {Schidler, Susanne},
  title     = {BIOconSOLAR - Ein Nachhaltigkeitsassessment},
  subject      = {Sustainability},
  language  = {de}
}
@misc{DurakbasaPoszvekGokcenetal.,
  author    = {Durakbasa, Numan and Poszvek, G{\"u}nther and Gokcen, Bas and Bauer, Jorge Martin},
  title     = {Developments in precision engineering: high precision metrology applications to improve efficiency and quality},
  subject      = {Precision Engineering},
  language  = {en}
}
@article{FechnerMaul,
  author    = {Fechner, Hubert and Maul, Lukas},
  title     = {Wie im Jahr 2025 zwei Millionen Menschen in Wien leben werden - {\"U}berlegungen zum Geb{\"a}ude der Zukunft},
  series = {Zukunft Stadt. Wirtschaftspolitische Visionen f{\"u}r die urbanen Zentren von morgen},
  journal   = {Zukunft Stadt. Wirtschaftspolitische Visionen f{\"u}r die urbanen Zentren von morgen},
  subject      = {Vienna},
  language  = {de}
}
@misc{Leonhartsberger,
  author    = {Leonhartsberger, Kurt},
  title     = {Kleinwindkraftanlagen Qualit{\"a}tssicherung, Netzeinbindung und Standortbewertung},
  subject      = {Wind Power},
  language  = {de}
}
@inproceedings{GrotscharSchwaiger,
  author    = {Grotschar, Mario and Schwaiger, Robert},
  title     = {Gesture control for an unmanned ground vehicle},
  series = {Proceedings of the Austrian Robotics Workshop 2015},
  booktitle = {Proceedings of the Austrian Robotics Workshop 2015},
  subject      = {Gesture Control},
  language  = {en}
}
@article{LeonhartsbergerPeppoloni,
  author    = {Leonhartsberger, Kurt and Peppoloni, Mauro},
  title     = {Small Wind Power in Austria},
  series = {World Wind Energy Association Wind Bulletin},
  journal   = {World Wind Energy Association Wind Bulletin},
  subject      = {Wind Power},
  language  = {en}
}
@misc{Leonhartsberger,
  author    = {Leonhartsberger, Kurt},
  title     = {Erfahrungen mit Normen und Standards im Bereich Kleinwindkraft.},
  subject      = {Wind Power},
  language  = {de}
}
@misc{LeonhartsbergerNenning,
  author    = {Leonhartsberger, Kurt and Nenning, Thomas},
  title     = {Kleinwindkraft in {\"O}sterreich},
  subject      = {Wind Power},
  language  = {de}
}
@misc{GrotscharSchwaiger,
  author    = {Grotschar, Mario and Schwaiger, Robert},
  title     = {Gesture control for an unmanned ground vehicle},
  subject      = {Gesture Control},
  language  = {en}
}
@misc{FechnerLeonhartsberger,
  author    = {Fechner, Hubert and Leonhartsberger, Kurt},
  title     = {IEA Aktivit{\"a}ten im Bereich der Integration von PV und Wind in die {\"o}ffentlichen Stromnetze},
  subject      = {Smart Grids},
  language  = {de}
}
@techreport{LeonhartsbergerRenz,
  author    = {Leonhartsberger, Kurt and Renz, Kathrin},
  title     = {Kleinwindkraftreport {\"O}sterreich},
  subject      = {Small Wind Plant},
  language  = {de}
}
@misc{Fechner,
  author    = {Fechner, Hubert},
  title     = {Photovoltaik und Wind ver{\"a}ndern unser Energiesystem},
  subject      = {Photovoltaics},
  language  = {de}
}
@techreport{Fechner,
  author    = {Fechner, Hubert},
  title     = {Photovoltaik Technologie-Roadmap f{\"u}r {\"O}sterreich},
  subject      = {Photovoltaics},
  language  = {de}
}
@techreport{FechnerLeonhartsberger,
  author    = {Fechner, Hubert and Leonhartsberger, Kurt},
  title     = {Berichtsteil Photovoltaik},
  subject      = {Photovoltaics},
  language  = {de}
}
@misc{Leonhartsberger,
  author    = {Leonhartsberger, Kurt},
  title     = {Chancen und Herausforderungen Urbaner Windenergie},
  subject      = {Wind Power},
  language  = {en}
}
@misc{Fechner,
  author    = {Fechner, Hubert},
  title     = {The Smart Grid Innovation Process in Austria},
  subject      = {Smart Grids},
  language  = {en}
}
@misc{Knoebl,
  author    = {Kn{\"o}bl, Karl},
  title     = {Smart Grid Research Infrastructures in Austria},
  subject      = {Smart Grids},
  language  = {en}
}
@book{Knoebl,
  author    = {Kn{\"o}bl, Karl},
  title     = {Erneuerbare Energie aus Photovoltaikanlagen: Technische, organisatorische und rechtliche Herausforderungen bei vermehrter Integration in das elektrische Verteilnetz},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Photovoltaics},
  language  = {de}
}
@techreport{BiermayrEhrigWeissetal.,
  author    = {Biermayr, Peter and Ehrig, Rita and Weiss, Werner and Pr{\"u}ggler, Natalie and Fechner, Hubert},
  title     = {Innovative Energietechnologien in {\"O}sterreich - Marktentwicklung 2010},
  subject      = {Energy Technology},
  language  = {de}
}
@article{PruegglerPruegglerWirl,
  author    = {Pr{\"u}ggler, Natalie and Pr{\"u}ggler, Wolfgang and Wirl, Franz},
  title     = {Storage and Demand Side Management as power generator's strategic instruments to influence demand and prices},
  series = {Energy},
  journal   = {Energy},
  number    = {Vol. 36},
  pages     = {6308 -- 6317},
  subject      = {Energy},
  language  = {en}
}
@inproceedings{GhaemiSchneider,
  author    = {Ghaemi, Sara and Schneider, Simon},
  title     = {Potential analysis of residential Demand Response using GridLAB-D},
  series = {IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society},
  booktitle = {IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society},
  pages     = {8039 -- 8045},
  subject      = {Potential Analysis},
  language  = {en}
}
@misc{Prueggler,
  author    = {Pr{\"u}ggler, Natalie},
  title     = {ECONOMIC POTENTIAL OF DEMAND RESPONSE AT HOUSEHOLD LEVEL - ARE CENTRAL-EUROPEAN MARKET CONDITIONS SUFFICIENT?},
  subject      = {Market},
  language  = {de}
}
@inproceedings{GrotscharKraupp,
  author    = {Grotschar, Mario and Kraupp, Michael},
  title     = {Augmenting a mobile Austrobotics-Platform with sensors for USAR},
  series = {Proceedings of the Austrian Robotics Workshop 2014},
  booktitle = {Proceedings of the Austrian Robotics Workshop 2014},
  subject      = {Austrobotics-Platform},
  language  = {de}
}
@article{PruegglerBremberger,
  author    = {Pr{\"u}ggler, Natalie and Bremberger, Christoph},
  title     = {Grid regulation in Austria: smart grids incentives or disincentives?},
  series = {E \& I ELEKTROTECHNIK UND INFORMATIONSTECHNIK},
  journal   = {E \& I ELEKTROTECHNIK UND INFORMATIONSTECHNIK},
  number    = {Vol 128, 10},
  pages     = {336 -- 341},
  subject      = {Smart Grids},
  language  = {en}
}
@misc{LeonhartsbergerNenning,
  author    = {Leonhartsberger, Kurt and Nenning, Thomas},
  title     = {Speichersysteme - Welcher Speicher f{\"u}r welches Einsatzgebiet},
  subject      = {Energy Storage},
  language  = {de}
}
@misc{GrotscharKraupp,
  author    = {Grotschar, Mario and Kraupp, Michael},
  title     = {Augmenting a mobile Austrobotics-Platform with sensors for USAR},
  subject      = {Austrobotics-Platform},
  language  = {en}
}
@article{SchidlerAdensamDaRocha,
  author    = {Schidler, Susanne and Adensam, Heidi and Da Rocha, K.},
  title     = {Berufliche Qualifizierung im Umweltsektor mit Schwerpunkt Erneuerbare Energien / Neue Energietechnologien unter antizipierender Ber{\"u}cksichtigung des Nationalen Qualifikationsrahmens (NQR). Schwerpunkt: Integration von Nachhaltigkeitsaspekten},
  series = {AMS Foschungsnetz / AMS INFO 160 / Arbeitsmarktservice {\"O}sterreich},
  journal   = {AMS Foschungsnetz / AMS INFO 160 / Arbeitsmarktservice {\"O}sterreich},
  subject      = {Professional Qualification},
  language  = {de}
}
@article{DelucaBermejoMoratinosGruenbichleretal.,
  author    = {Deluca, Marco and Bermejo Moratinos, Ra{\´u}l and Gr{\"u}nbichler, Hannes and Pressler, Volker and Danzer, Robert and Nickel, Klaus G.},
  title     = {Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics},
  series = {Scripta materialia},
  journal   = {Scripta materialia},
  number    = {63(2)},
  pages     = {343 -- 346},
  subject      = {Materials},
  language  = {en}
}
@inproceedings{StifterSchidlerKathanetal.,
  author    = {Stifter, Matthias and Schidler, Susanne and Kathan, Johannes and Adensam, Heidi and Rimpler, H. and Greger, Dieter},
  title     = {Photovoltaik-Vanadium Redox Flow Speichersysteme zur Stabilisierung von Niederspannungsverteilnetzen und Analyse ihrer Nachhaltigkeit},
  series = {Proceedings of EnInnov, Graz ({\"O}sterreich)},
  booktitle = {Proceedings of EnInnov, Graz ({\"O}sterreich)},
  subject      = {Photovoltaics},
  language  = {de}
}
@article{SchidlerAdensamDaRocha,
  author    = {Schidler, Susanne and Adensam, Heidi and Da Rocha, K.},
  title     = {Zur Integration von Nachhaltigkeitsaspekten bei beruflichen Qualifizierungsmaßnahmen im Umweltsektor. Ergebnisse einer aktuellen Studie des AMS {\"O}sterreich},
  series = {AMS info / Arbeitsmarktservice {\"O}sterreich},
  journal   = {AMS info / Arbeitsmarktservice {\"O}sterreich},
  subject      = {Professional Qualification},
  language  = {de}
}
@inproceedings{MachartPaulesichSchidler,
  author    = {Machart, J{\"u}rgen and Paulesich, Reinhard F. and Schidler, Susanne},
  title     = {Nachhaltigkeitstechnologien und Risikokapital, EASEY Venture Capital Transfer},
  series = {Berichte aus Energie- und Umweltforschung, BMVIT, Wien},
  booktitle = {Berichte aus Energie- und Umweltforschung, BMVIT, Wien},
  subject      = {Sustainability},
  language  = {en}
}
@misc{GeleyStuerSchidleretal.,
  author    = {Geley, R. and Stuer, N. and Schidler, Susanne and Franz, Peter},
  title     = {Nachhaltige Biomassenutzung in Heizkraftwerken},
  series = {Mitteleurop{\"a}ische Biomassekonferenz, Graz},
  journal   = {Mitteleurop{\"a}ische Biomassekonferenz, Graz},
  subject      = {Biomass},
  language  = {de}
}
@article{Prueggler,
  author    = {Pr{\"u}ggler, Natalie},
  title     = {A cost-based approach to evaluate future grid structure options},
  series = {International Journal of Distributed Energy Resources},
  journal   = {International Journal of Distributed Energy Resources},
  subject      = {Grid},
  language  = {en}
}
@incollection{Ambrosch,
  author    = {Ambrosch, Roland},
  title     = {Fahrerlose Flurf{\"o}rderzeuge / Einsatz bildverarbeitende Systeme},
  series = {Taschenbuch Robotik - Montage - Handhabung},
  booktitle = {Taschenbuch Robotik - Montage - Handhabung},
  publisher = {Fachbuchverlag Leipzig im Carl Hanser Verlag},
  address   = {M{\"u}nchen},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Robotics},
  language  = {de}
}
@inproceedings{Malisa,
  author    = {Malisa, Viktorio},
  title     = {Ein Beitrag zu der Standardisierung des Mechatronik-Studiums},
  series = {Internationales Forum Mechatronik, Winterthur},
  booktitle = {Internationales Forum Mechatronik, Winterthur},
  subject      = {Mechatronic},
  language  = {de}
}
@inproceedings{FechnerBruendlingerMayrBraunetal.,
  author    = {Fechner, Hubert and Br{\"u}ndlinger, C. and Mayr-Braun, C. and Ogimoto, K. and Frederiksen, K. and Kropski, B. and Graditi, G. and MacGill, F. and Turcotte, D. and Perret, L.},
  title     = {Bringing Together International Research On High Penetration Photovoltaics In Electricity Grids - The New Task 14 Of The IEA-Photovoltaic Power Systems Programme},
  series = {25th PV World Conference / Valencia (Spain)},
  booktitle = {25th PV World Conference / Valencia (Spain)},
  subject      = {Photovoltaics},
  language  = {en}
}
@techreport{BiermayrEhrigStrasseretal.,
  author    = {Biermayr, Peter and Ehrig, Rita and Strasser, Christoph and W{\"o}rgetter, Manfred and Pr{\"u}ggler, Natalie and Fechner, Hubert and Nurschinger, Markus and Eberl, Manuela},
  title     = {Innovative Energietechnologien in {\"O}sterreich Marktentwicklung 2009 Biomasse, Photovoltaik, Solarthermie und W{\"a}rmepumpen},
  subject      = {Energy Technology},
  language  = {de}
}
@inproceedings{PruegglerBremberger,
  author    = {Pr{\"u}ggler, Natalie and Bremberger, Christoph},
  title     = {A regulatory innovation incentive for alternative grid structure design options},
  series = {In Proceedings / 20th USAEE IAEE North American Conference / Energy and the Environment: Conventional and Unconventional Solutions, Calgary (Canada)},
  booktitle = {In Proceedings / 20th USAEE IAEE North American Conference / Energy and the Environment: Conventional and Unconventional Solutions, Calgary (Canada)},
  subject      = {Smart Grids},
  language  = {en}
}
@inproceedings{FechnerLugmaier,
  author    = {Fechner, Hubert and Lugmaier, Andreas},
  title     = {Nationale Technologieplattform Smart Grids Austria - intelligente Stromnetze f{\"u}r die zuk{\"u}nftige Energieversorgung},
  series = {e\&i},
  booktitle = {e\&i},
  subject      = {Smart Grids},
  language  = {en}
}
@inproceedings{FechnerLopezPolo,
  author    = {Fechner, Hubert and L{\´o}pez-Polo, Assun},
  title     = {Photovoltaik Technologie Roadmap {\"O}sterreich},
  series = {11.Symposium Energieinnovation, TU Graz (Steiermark)},
  booktitle = {11.Symposium Energieinnovation, TU Graz (Steiermark)},
  subject      = {Photovoltaics},
  language  = {de}
}
@article{SchidlerJandlBuechsenmeister,
  author    = {Schidler, Susanne and Jandl, Robert and B{\"u}chsenmeister, Richard},
  title     = {Praktikable Kriterien objektivieren},
  series = {Forstzeitung},
  journal   = {Forstzeitung},
  number    = {120(9)},
  subject      = {Sustainability},
  language  = {de}
}
@inproceedings{FechnerBrunner,
  author    = {Fechner, Hubert and Brunner, Helfried},
  title     = {Smart Grid Roadmap For Austria},
  series = {CIRED Workshop, Lyon (France)},
  booktitle = {CIRED Workshop, Lyon (France)},
  subject      = {Smart Grids},
  language  = {en}
}
@incollection{Hieger,
  author    = {Hieger, Christof},
  title     = {Steuerung von Industrierobotern / Humanoide Roboter},
  publisher = {Fachbuchverlag Leipzig im Carl Hanser Verlag},
  publisher      = {Fachhochschule Technikum Wien},
  pages     = {156 -- 159},
  subject      = {Robotics},
  language  = {de}
}
@article{Schidler,
  author    = {Schidler, Susanne},
  title     = {Nachhaltige Entwicklung - Beispiele aus dem Bereich Erneuerbare Rohstoffe / Energien},
  series = {AMS Forschungsnetzwerk / Arbeitsmarktservice {\"O}sterreich, Abt. Arbeitsmarktforschung und Berufsinformation / AMS INFO},
  journal   = {AMS Forschungsnetzwerk / Arbeitsmarktservice {\"O}sterreich, Abt. Arbeitsmarktforschung und Berufsinformation / AMS INFO},
  subject      = {Sustainability},
  language  = {de}
}
@inproceedings{FechnerWatt,
  author    = {Fechner, Hubert and Watt, Greg},
  title     = {Photovoltaic market and industry trends - latest results from the IEA PVPS Program},
  series = {e\&i},
  booktitle = {e\&i},
  subject      = {Photovoltaics},
  language  = {en}
}
@inproceedings{Fechner,
  author    = {Fechner, Hubert},
  title     = {High Penetration Photovoltaics in Electricity Grids},
  series = {Invited lecture at 45th IEEE-International Conference on Microelectronics, Devices and Materials, Postojna (Slovenia)},
  booktitle = {Invited lecture at 45th IEEE-International Conference on Microelectronics, Devices and Materials, Postojna (Slovenia)},
  subject      = {Photovoltaics},
  language  = {en}
}
@inproceedings{Fechner,
  author    = {Fechner, Hubert},
  title     = {Direkte Solartechnologien als besondere Chance f{\"u}r {\"O}sterreichs Wirtschaft},
  series = {e\&i},
  booktitle = {e\&i},
  subject      = {Solar Technology},
  language  = {de}
}
@article{BhatGanglbauerBosch,
  author    = {Bhat, Karthik Subramanya and Ganglbauer, Johanna and Bosch, Elina},
  title     = {Techno-economic simulation and evaluation of scalable 'energy cells' locally generating renewable energy},
  series = {e \& i Elektrotechnik und Informationstechnik},
  journal   = {e \& i Elektrotechnik und Informationstechnik},
  number    = {139},
  pages     = {612 -- 620},
  abstract  = {The ERA-Net SES project Regional Renewable Energy Cells (R2EC) [1] aims at developing a scalable system for decentralized, interacting 'energy cells' with a high concentration of locally generated renewable energy. 'Energy cells' are essentially Renewable Energy Communities (ECs) in the European context. The system aims at maximizing the utilization of locally generated renewable energy through Electrical Storage (ES) as well as high-electric applications like e‑heating, Heat Pumps (HPs), and E‑Vehicles (EVs). The system is also designed to interact with other energy cells locally, thus, improving the utilization of locally generated energy. A variety of different adjacent energy cells in three countries, Austria (AT), Belgium (BE), and Norway (NO), are analyzed, and the results are used for the development of regional and renewable energy cell systems. This approach aims at developing tailor-made solutions that meet the different local and regional requirements and the electrical energy demand of the observed energy cells. A unique opportunity is created, as the three countries are at varying levels of regional development in the field of energy communities, and the regional requirements and conditions differ significantly. A comprehensive investigation of the technical and economic viability of the ECs in the three regions is conducted on a simulation level. The technical simulation results show an increased self-consumption of individual users and the overall cell in all of the observed testbeds, while the economic analysis shows economic benefits at varying levels in each of the observed testbeds. The implemented R2EC system ascertains both technical and economic viability in the observed testbeds.},
  subject      = {Energy Cells},
  language  = {en}
}
@article{Lang,
  author    = {Lang, Moritz},
  title     = {The mechanism of scale-invariance},
  series = {Automatica},
  volume    = {140},
  journal   = {Automatica},
  number    = {June 2022},
  abstract  = {A system is invariant with respect to an input transformation if we can transform any dynamic input by this function and obtain the same output dynamics after adjusting the initial conditions appropriately. Often, the set of all such input transformations forms a Lie group, the most prominent examples being scale-invariant (, ) and translational-invariant () systems, the latter comprising linear systems with transfer function zeros at the origin. Here, we derive a necessary and sufficient normal form for invariant systems and, by analyzing this normal form, provide a complete characterization of the mechanism by which invariance can be achieved. In this normal form, all invariant systems (i) estimate the applied input transformation by means of an integral feedback, and (ii) then apply the inverse of this estimate to the input before processing it in any other way. We demonstrate our results based on three examples: a scale-invariant "feed-forward loop", a bistable switch, and a system resembling the core of the mammalian circadian network.},
  subject      = {Invariant systems},
  language  = {en}
}
@inproceedings{LugmaierBrunnerPrueggleretal.,
  author    = {Lugmaier, Andreas and Brunner, Helfried and Pr{\"u}ggler, Wolfgang and Gl{\"u}ck, Natalie and Kupzog, Friederich and Fechner, Hubert and Tauschek, Ursula and Rieder, Thomas and Derler, Karl and M{\"u}hlberger, Thomas},
  title     = {RoadmapSmart Grids Austria Der Weg in die Zukunft der elektrischen Stromnetze!Pathway to the future of electrical power grids!},
  series = {FEEI - Fachverband der Elektro- und Elektronikindustrie / {\"O}sterreichs E-Wirtschaft},
  booktitle = {FEEI - Fachverband der Elektro- und Elektronikindustrie / {\"O}sterreichs E-Wirtschaft},
  subject      = {Smart Grids},
  language  = {de}
}
@article{KubingerPeschakWoeberetal.,
  author    = {Kubinger, Wilfried and Peschak, Bernhard and W{\"o}ber, Wilfried and Sulz, Clemens},
  title     = {Bildgebende Sensorsystems f{\"u}r robotische Systeme in der Agrar- und Landtechnik},
  series = {e\&i Elektrotechnik und Informationstechnik},
  volume    = {134},
  journal   = {e\&i Elektrotechnik und Informationstechnik},
  number    = {6},
  pages     = {316 -- 322},
  subject      = {Sensor},
  language  = {de}
}
@article{HagauerMatlschweigerTippelreitheretal.,
  author    = {Hagauer, Josef and Matlschweiger, Ulrich and Tippelreither, Christian and Lutz, Markus and Hribernig, Thomas and Lackner, Maximilian},
  title     = {Controlling Metal Fires through Cellulose Flake Blanketing Followed by Water Spray Cooling},
  series = {Fire},
  volume    = {5},
  journal   = {Fire},
  number    = {3},
  doi       = {10.3390/fire5030083},
  abstract  = {The traditional methods of fighting metal fires are not always safe for firefighters. The sand and salts that are thrown onto the fire to suffocate the flames can lead to splashes of molten metal, putting the firefighters and the surroundings at risk. A novel process is described where magnesium fires are brought under control using a simple two-step process. First, coated cellulose flakes, which contain approx. 30\% inorganic salts, are blown onto the fire from a distance of several meters. Due to its low bulk density, the material settles smoothly on the fire and immediately covers the flames for several seconds. Before the hot metal can break through this cover, a fine water spray is applied to the fire. The water spray wets the top layer of the cellulose flakes, which will begin to char from the bottom. The water evaporates from within the cellulose flake layer and withdraws heat. It was observed that no hydrogen is formed and that this technique can safely control fires. It is judged that 90 kg of flakes could safely bring a pile of 75 kg of burning Mg flakes under control. By using a pneumatic conveying unit for the flakes, firefighters can effectively and efficiently cover the flames from a safe distance. This novel method could be recommended to firefighters in industrial magnesium processing plants, as well as local firefighters in the vicinity of such plants.},
  subject      = {magnesium fire},
  language  = {en}
}
@inproceedings{WoeberKeferKubingeretal.,
  author    = {W{\"o}ber, Wilfried and Kefer, Martin and Kubinger, Wilfried and Szuegyi, Daniel},
  title     = {Evaluation of Daylight and Thermal Infra-Red based Detection for Platooning Vehicles},
  series = {Annals of DAAM for 2012 and Proceedings of the 23rd International DAAM Symposium},
  booktitle = {Annals of DAAM for 2012 and Proceedings of the 23rd International DAAM Symposium},
  pages     = {719 -- 722},
  subject      = {Vehicle},
  language  = {en}
}
@incollection{WoeberPeschakOtrebski,
  author    = {W{\"o}ber, Wilfried and Peschak, Bernhard and Otrebski, Richard},
  title     = {ASK: Entwicklung eines modularen Systems zur Automatisierung landwirtschaftlicher Maschinen},
  series = {Intelligente Systeme - Stand der Technik und neue M{\"o}glichkeiten. Lecture Notes in Informatics},
  booktitle = {Intelligente Systeme - Stand der Technik und neue M{\"o}glichkeiten. Lecture Notes in Informatics},
  address   = {Bonn},
  publisher      = {Fachhochschule Technikum Wien},
  pages     = {221 -- 224},
  subject      = {Automation},
  language  = {de}
}
@inproceedings{TabakovicCsapo,
  author    = {Tabakovic, Momir and Csapo, Csilla},
  title     = {Industry - University cooperation in the renewable energy field in south Africa- Gap analysis and enhancement proposals},
  series = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz},
  booktitle = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz},
  subject      = {Renewable Energies},
  language  = {en}
}
@inproceedings{SteiglAburaiaWoeber,
  author    = {Steigl, D and Aburaia, Mohamed and W{\"o}ber, Wilfried},
  title     = {Autonomous Grasping of Known Objects Using Depth Data and the PCA},
  series = {Austrian Robotics Workshop 2020},
  booktitle = {Austrian Robotics Workshop 2020},
  subject      = {Robotic},
  language  = {en}
}
@article{DilerYanarOezdemiretal.,
  author    = {Diler, Abdulkerim and Yanar, Mete and {\"O}zdemir, Veysel Fatih and Aydin, Recep and Kaynar, {\"O}zg{\"u}r and Palangi, Valiollah and Lackner, Maximilian and Ko{\c{c}}yigit, R{\i}dvan},
  title     = {Effects of Slaughter Age of Holstein Friesian Bulls on Meat Quality: Chemical Composition, Textural Characteristics, Sensory Attributes and Fatty Acid Profile},
  series = {Foods},
  volume    = {12},
  journal   = {Foods},
  number    = {1},
  doi       = {10.3390/foods12010158},
  abstract  = {This study aimed to investigate the effects of slaughter age (young vs. old), muscle type (Longissimus dorsi (LD), Gluteus medius (GM)) and fat deposits (kidney knob and channel fat, subcutaneous fat, intramuscular fat) on chemical, organoleptic, textural characteristics and fatty acid composition of Holstein Friesian bull meat. For this purpose, the carcasses of 26 Holstein Friesian bulls that had been fattened on the same private farm were assigned to two experimental groups based on their age at slaughter: a young group (YG) (average age: 17.0 ± 1.0 months old) and an old group (OG) (average age: 22.0 ± 1.0 months old). The percentage of crude protein, panel tenderness score, polyunsaturated fatty acid (PUFA) and saturated fatty acid (SFA) content, the PUFA/SFA ratio and the hypocholesterolemic fatty acid (DFA)/hypercholesterolemic fatty acid (OFA) ratio of the bull carcasses decreased significantly with increasing slaughter age. By contrast, the OFA content of the carcasses significantly increased (p < 0.05) with increasing slaughter age. Advanced slaughter age resulted in lower panel tenderness scores. Additionally, the meat of the bulls in the OG was considered to be less healthy because of the less desirable fatty acid composition and nutritional indices, such as the PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios, compared to the meat from the bulls in the YG. Furthermore, the intramuscular fat and internal fat contained high percentages of PUFA and SFA and high PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios. Interestingly, the percentage of OFA content in the internal and intramuscular fat tissues decreased with increasing slaughter age. In conclusion, this study provided evidence that slaughter age and muscle and fat type are essential sources of variations in the textural characteristics, sensory panel attributes and fatty acid profile of meat from Holstein Friesian bulls.},
  subject      = {fatty acid profile},
  language  = {en}
}
@article{BağcıkKocErtenetal.,
  author    = {Bağc{\i}k, Caner and Ko{\c{c}}, Fisun and Erten, Kadir and Esen, Selim and Palangi, Valiollah and Lackner, Maximilian},
  title     = {Lentilactobacillus buchneri Preactivation Affects the Mitigation of Methane Emission in Corn Silage Treated with or without Urea},
  series = {Fermentation},
  volume    = {8},
  journal   = {Fermentation},
  number    = {12},
  doi       = {10.3390/fermentation8120747},
  abstract  = {The aim of this study was to investigate the effect of different forms of Lentilactobacillus buchneri on the in vitro methane production, fermentation characteristics, nutritional quality, and aerobic stability of corn silage treated with or without urea. The following treatments were applied prior to ensiling: (1) no urea treatment and LB; (2) no urea treatment+freeze dried LB; (3) no urea treatment+preactivated LB; (4) with urea treatment+no LB; (5) with urea treatment+freeze dried LB; (6) with urea treatment+preactivated. LB was applied at a rate of 3 × 108 cfu/kg on a fresh basis, while urea was applied at a rate of 1\% on the basis of dry matter. Data measured at different time points were analyzed according to a completely randomized design, with a 2 × 3 × 5 factorial arrangement of treatments, while the others were analyzed with a 2 × 3 factorial arrangement. Preactivated LB was more effective than freeze-dried LB in reducing silage pH, ammonia nitrogen, cell-wall components, yeast count, and carbon dioxide production, as well as increasing lactic acid and residual water-soluble carbohydrate and aerobic stability (p < 0.0001). A significant reduction in the methane ratio was observed after 24 h and 48 h incubation with preactivated forms of LB (p < 0.001). The results indicated that preactivated LB combined with urea improved fermentation characteristics, nutritional quality, and aerobic stability and reduced the methane ratio of corn silages.},
  subject      = {gas production},
  language  = {en}
}
@article{CoşkuntunaLacknerErtenetal.,
  author    = {Co{\c{s}}kuntuna, Levend and Lackner, Maximilian and Erten, Kadir and G{\"u}l, Sevilay and Palangi, Valiollah and Ko{\c{c}}, Fisun and Esen, Selim},
  title     = {Greenhouse Gas Emission Reduction Potential of Lavender Meal and Essential Oil for Dairy Cows},
  series = {Fermentation},
  volume    = {9},
  journal   = {Fermentation},
  number    = {3},
  doi       = {10.3390/fermentation9030253},
  abstract  = {This research aims to evaluate the potential of lavender meal (LM) and lavender essential oil (LEO) to mitigate methane emissions by dairy cows. Locally grown lavender was collected fresh for this purpose, and its oil was extracted using the cold-press method. The resultant LEO and LM and whole lavender (WL) were added to dairy cow concentrate feed at 0\%, 0.05\%, and 0.10\%, and their effects on vitro gas production values and gas concentrations were subsequently assessed. Out of the 30 bioactive compounds isolated from LEO, linalool and linalyl acetate were the most common—accounting for 70.4\% of the total. The lavender dose had a significant influence on gas production for up to 12 h. No significant variations were found across the lavender forms when gas kinetics, in vitro degradability, and predicted energy values were compared. The addition of WL to the concentrate feed of dairy cows produced the greatest quantities of methane, carbon dioxide, and hydrogen sulfide, whereas LEO resulted in the lowest values. In contrast, no significant difference in ammonia content was found across the various lavender forms added into dairy cow concentrate feed. The results of this research suggest that adding 0.05-0.10\% LM and LEO to concentrate feed may decrease greenhouse gas emissions from dairy cows.},
  subject      = {lavender},
  language  = {en}
}
@inproceedings{ValckenborgBergerUjvarietal.,
  author    = {Valckenborg, Roland and Berger, Karl A. and {\´U}jv{\´a}ri, Guszt{\´a}v and Eder, Gabriele C. and Gaisberger, Lukas and Tabakovic, Momir and Polo Lopez, Christina S. and Boddaert, Simon and del Buono, Matteo and Mart{\´i}n Chivelet, Nuria and Sanz Martinez, Asier and Kim, Jun-Tae and Gerd Imenes, Anne},
  title     = {COMPARISON OF IEC 61853-1 MATRIX EVALUATIONS BASED ON INDOOR AND OUTDOOR MEASUREMENT DATA FROM PVPS TASK 15 BIPV ROUND-ROBIN},
  series = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021},
  booktitle = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021},
  subject      = {Measurement},
  language  = {en}
}
@misc{BucherAburaiaMarkletal.,
  author    = {Bucher, Christoph Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzales-Gutierrez, J. and Lammer, Helmuth},
  title     = {Continuous fiber reinforced freeform 3D printing},
  subject      = {Additive Manufacturing},
  language  = {en}
}
@article{MarklLackner,
  author    = {Markl, Erich and Lackner, Maximilian},
  title     = {Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {5},
  doi       = {10.3390/ma13051246},
  abstract  = {In general, composite materials are difficult to recycle. Tires belong to this class of materials. On top, one of their main constitutents, vulcanized rubber, is as elastomer, which cannot be remolten and hence is particularly challenging to put to a new use. Today, the main end-of-life routes of tires and other rubber products are landfilling, incineration in e.g., cement plants, and grinding to a fine powder, generating huge quantities and indicating a lack of sustainable recycling of this valuable material. True feedstock recycling is not feasible for complex mixtures such as tires, but devulcanization can be done to reactivate the cross-linked polymer for material recycling in novel rubber products. Devulcanization, i.e., the breaking up of sulfur bonds by chemical, thermophysical, or biological means, is a promising route that has been investigated for more than 50 years. This review article presents an update on the state-of-the art in rubber devulcanization. The article addresses established devulcanization technologies and novel processes described in the scientific and patent literatures. On the one hand, tires have become high-tech products, where the simultaneous improvement of wet traction, rolling resistance, and abrasion resistance (the so-called "magic triangle") is hard to achieve. On the other hand, recycling and sustainable end-of-life uses are becoming more and more important. It is expected that the public discussion of environmental impacts of thermoplastics will soon spill over to thermosets and elastomers. Therefore, the industry needs to develop and market solutions proactively. Every year, approximately 40 million tons of tires are discarded. Through the devulcanization of end-of-life tires (ELT), it is possible to produce new raw materials with good mechanical properties and a superior environmental footprint over virgin products. The devulcanization process has become an interesting technology that is able to support the circular economy concept.},
  subject      = {rubber devulcanization},
  language  = {en}
}
@article{BesharatiPalangiNiazifaretal.,
  author    = {Besharati, Maghsoud and Palangi, Valiollah and Niazifar, Masoumeh and Esen, Selim and Lackner, Maximilian},
  title     = {A Comprehensive Analysis of Cinnamon, Flaxseed, and Lemon Seed Essential Oils' Effects on In Vitro Gas Formation and Nutrient Degradability in Diets},
  series = {Fermentation},
  volume    = {9},
  journal   = {Fermentation},
  number    = {6},
  doi       = {10.3390/fermentation9060504},
  abstract  = {This study aimed to assess the impact of essential oils (EOs) on in vitro gas formation and the degradability of dairy and beef cattle diets. This study also aimed to investigate the effects of different types of EOs on nutrient utilization and rumen microbial activity. The current study was conducted using a fully randomized design consisting of eight experimental treatments, including two control treatments without any additives, and treatments with cinnamon essential oil (CEO), flaxseed essential oil (FEO), and lemon seed essential oil (LEO) at a concentration of 60 mg/kg fresh mass. Two control treatments were used, one with alfalfa silage and dairy concentrate (DC, CON-DC) and the other with alfalfa silage and fattening concentrate (FC, CON-FC). Gas formation, dry matter (DM) digestibility, crude protein (CP) digestibility, effective degradability (ED), and soluble fractions of DM and organic matter (OM) were evaluated. CEO had a substantial effect on gas formation (p < 0.05). When EOs were added to the diets, they increased dry matter digestibility after 24 h of incubation as compared to control treatments. After 24 h of incubation, FCCEO and FCFEO had the highest CP digestibility among the diets. FCLEO considerably enhanced ED, as well as the soluble fraction of DM (a) at a passage rate of 2\% per hour. Treatment with FCCEO resulted in a significant increase in soluble fractions compared to the control diets. At a passage rate of 2\% h, DCCEO had the maximum ED value. When EOs were introduced to the diet, they dramatically decreased the insoluble portion of CP (b). Compared to the control treatments, gas production was significantly lower in the presence of LEO (FCLEO; p < 0.05). The addition of EOs to cattle diets may increase nutrient utilization and enhance rumen microbial activity. EOs extracted from lemon seeds (at a dose of 60 mg/kg of diet) lowered gas production in both dairy cattle and fattening diets.},
  subject      = {Digestibility},
  language  = {en}
}
@article{PalangiTaghizadehAbachietal.,
  author    = {Palangi, Valiollah and Taghizadeh, Akbar and Abachi, Soheila and Lackner, Maximilian},
  title     = {Strategies to Mitigate Enteric Methane Emissions in Ruminants: A Review},
  series = {Sustainability},
  volume    = {Vol. 14},
  journal   = {Sustainability},
  number    = {Issue 20},
  doi       = {10.3390/su142013229},
  abstract  = {Methane is the main greenhouse gas (GHG) emitted by ruminants. Mitigation strategies are required to alleviate this negative environmental impact while maintaining productivity and ruminants' health. To date, numerous methane mitigation strategies have been investigated, reported and suggested by scientists to the livestock industry. In this review, the authors will focus on the commonly practiced and available techniques expanding the knowledge of the reader on the advances of methane mitigation strategies with a focus on the recent literature. Furthermore, the authors will attempt to discuss the drawbacks of the strategies in terms of animal health and performance reduction as well as the concept of feed and energy loss, adding an economic perspective to methane emission mitigation which is in the farmers' direct interest. As a whole, many factors are effective in reducing undesired methane production, but this is definitely a complex challenge. Conclusively, further research is required to offer effective and efficient methane production mitigation solutions in ruminants worldwide, thus positively contributing to climate change.},
  subject      = {greenhouse gas (GHG)},
  language  = {en}
}
@article{MokhtarzadehNobakhtMehmannavazetal.,
  author    = {Mokhtarzadeh, Shakir and Nobakht, Ali and Mehmannavaz, Yousef and Palangi, Valiollah and Eseceli, H{\"u}seyin and Lackner, Maximilian},
  title     = {Impacts of Continuous and Intermittent Use of Bovine Colostrum on Laying Japanese Quails: Egg Performance and Traits, Blood Biochemical and Antioxidant Status},
  series = {Animals},
  volume    = {12},
  journal   = {Animals},
  number    = {Issue 20},
  doi       = {10.3390/ani12202811},
  abstract  = {Quail is used in cookery, but mainly for its egg production around the globe, and sustainable poultry farming practices have been searched. The use of colostrum (beestings or first milk from cows) in quails' diet can play an important role in providing probiotics and reducing the need for antibiotics, which, in addition to better quail performance, is effective in reducing environmental impacts. The results of the current research show that the continuous use of bovine colostrum (BC) in laying quails' diets has beneficial effects on their performance, egg traits, blood indexes and antioxidant status.},
  subject      = {antioxidant},
  language  = {en}
}
@article{PalangiLackner,
  author    = {Palangi, Valiollah and Lackner, Maximilian},
  title     = {Management of Enteric Methane Emissions in Ruminants Using Feed Additives: A Review},
  series = {Animals},
  volume    = {12},
  journal   = {Animals},
  number    = {24},
  doi       = {10.3390/ani12243452},
  abstract  = {Methane emission from enteric fermentation in ruminants is the single most relevant greenhouse gas source in agriculture, and it is amongst the largest anthropogenic ones. As ruminants are needed globally for meat, milk and other goods production on a huge scale, feed additives could offer an interesting solution to reduce CH4 emissions. Methane emission strategies are investigated to maintaining productivity and the overall health of the animal. Some strategies have shown to reduce the propagation and/or eliminate ruminal flora affecting the health and productivity of the animal. Therefore, identifying beneficial strategies leads to improving productivity and the health of the animal and environment.},
  subject      = {greenhouse gas},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {EU-ASCIN - Projektpr{\"a}sentation},
  subject      = {Smart City},
  language  = {en}
}
@article{WoeberRauerPapaetal.,
  author    = {W{\"o}ber, Wilfried and Rauer, Johannes and Papa, Maximilian and Aburaia, Ali and Schwaiger, Simon and Novotny, Georg and Aburaia, Mohamed and Kubinger, Wilfried},
  title     = {Evaluierung von Navigationsmethoden f{\"u}r mobile Roboter},
  series = {e \& i Elektrotechnik und Informationstechnik},
  journal   = {e \& i Elektrotechnik und Informationstechnik},
  subject      = {Robotics},
  language  = {de}
}
@inproceedings{SchneiderZelgerTabakovic,
  author    = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir},
  title     = {State of play and future of small-town urban buildings guided by an energy-autonomy vision statement: consumption, calculation and potential embedded in Smart City Demo Way2Smart},
  series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen},
  booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen},
  pages     = {62 -- 66},
  subject      = {Smart City},
  language  = {en}
}
@misc{KamravamaneshPflueglLackneretal.,
  author    = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph},
  title     = {Enhancing PHB Production in Synechocystis sp. PCC 6714 by means of Process Engineering and Multivariate Design of Experiments},
  subject      = {PHB},
  language  = {en}
}
@inproceedings{SchwaigerAburaiaAburaiaetal.,
  author    = {Schwaiger, Simon and Aburaia, Mohamed and Aburaia, Ali and W{\"o}ber, Wilfried},
  title     = {Explainable Artificial Intelligence for Robot Arm Control},
  series = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna},
  volume    = {32},
  booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna},
  number    = {1},
  pages     = {0640 -- 0647},
  subject      = {Artificial Intelligence},
  language  = {en}
}
@inproceedings{LacknerMarklAburaia,
  author    = {Lackner, Maximilian and Markl, Erich and Aburaia, Mohamed},
  title     = {Cybersecurity Management for (Industrial) Internet of Things: Challenges and Opportunities},
  series = {Journal of Information Technology \& Software Engineering Keywords},
  booktitle = {Journal of Information Technology \& Software Engineering Keywords},
  subject      = {Security},
  language  = {en}
}
@techreport{TabakovicFechnerLeonhartsberger,
  author    = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt},
  title     = {National Survey Report of PV Power Applications in Austria 2016},
  organization    = {IEA - International Energy Agency},
  subject      = {Photovoltaics},
  language  = {en}
}
@techreport{TabakovicFechnerLeonhartsberger,
  author    = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt},
  title     = {National Survey Report of PV Power Applications in Austria 2015},
  subject      = {Photovoltaics},
  language  = {en}
}
@article{SchneiderBartlmaeLeiboldetal.,
  author    = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}fmann, Petra and Tabakovic, Momir and Zelger, Thomas},
  title     = {New Assessment Method for Buildings and Districts towards "Net Zero Energy Buildings" Compatible with the Energy Scenario 2050},
  series = {REAL CORP 2019},
  journal   = {REAL CORP 2019},
  number    = {April 2019},
  subject      = {Renewable Energies},
  language  = {en}
}
@misc{TabakovicSchneiderLaurentetal.,
  author    = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegrund},
  title     = {Korneuburgs way2smart - mobility concept, energy platform and social interaction},
  subject      = {Energy Supply},
  language  = {en}
}
@incollection{KrieglerWoeberAburaia,
  author    = {Kriegler, Andreas and W{\"o}ber, Wilfried and Aburaia, Mohamed},
  title     = {Artificial Neural Networks Based Place Categorization},
  series = {Digital Conversion on the Way to Industry 4.0},
  booktitle = {Digital Conversion on the Way to Industry 4.0},
  publisher = {Springer Verlag},
  publisher      = {Fachhochschule Technikum Wien},
  pages     = {201 -- 209},
  subject      = {Artificial Intelligence},
  language  = {en}
}
@misc{Lackner,
  author    = {Lackner, Maximilian},
  title     = {PHA - Biopolymere mit Potential},
  subject      = {Bioplastics},
  language  = {de}
}
@article{StadlerBloeschlVogletal.,
  author    = {Stadler, Philipp and Bl{\"o}schl, G{\"u}nter and Vogl, Wolfgang and Koschelnik, Juri and Epp, Markus, and Lackner, Maximilian and Oism{\"u}ller, Markus and Kumpan, Monika and Nemeth, Lukas, and Strauss, Peter and Sommer, Regina and Ryzinska-Paier, Gabriela and Farnleitner, Andras and Zessner, Matthias},
  title     = {Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams: A comparison of prototypes},
  series = {Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams},
  journal   = {Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams},
  subject      = {Enzymes},
  language  = {en}
}
@article{LacknerLutzHribernig,
  author    = {Lackner, Maximilian and Lutz, Markus and Hribernig, Thomas},
  title     = {Neuartiges Verfahren zum L{\"o}schen von Metallbr{\"a}nden mit Zelluloseflakes},
  series = {Feuerwehr Fachjournal},
  journal   = {Feuerwehr Fachjournal},
  number    = {September 2021},
  pages     = {54},
  subject      = {Extinguisher},
  language  = {de}
}
@book{WalaEllingerFranzetal.,
  author    = {Wala, Thomas and Ellinger, Florian and Franz, Peter and Kriz, Agnes and Zangl, Sabine and Sohm, Kurt and Tabakovic, Momir and Gollner, Helmut and Adams, Mark and Litzenberger, Stefan},
  title     = {Internationalisierung von Fachhochschulstudieng{\"a}ngen.: Ideen, Konzepte \& Erfahrungsberichte},
  publisher = {Independently Published},
  isbn      = {ISBN-13 : ‎979-8650872184},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Internationalisation},
  language  = {en}
}
@article{EngelhardtNowitzkiAburaiaOtrebskietal.,
  author    = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Otrebski, Richard and Rauer, Johannes and Orsolits, Horst},
  title     = {Research-based teaching in Digital Manufacturing and Robotics - the Digital Factory at the UAS Technikum Wien as a Case Example},
  series = {Procedia Manufacturing},
  journal   = {Procedia Manufacturing},
  number    = {Volume 45},
  pages     = {164 -- 170},
  subject      = {Digital Factory},
  language  = {en}
}
@article{AburaiaBucherLackneretal.,
  author    = {Aburaia, Mohamed and Bucher, Christoph and Lackner, Maximilian and Gonzalez-Gutierrez, Joamin and Zhang, Haiguang and Lammer, Herfried},
  title     = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament},
  series = {Biomaterials and Medical Applications},
  journal   = {Biomaterials and Medical Applications},
  subject      = {Filament},
  language  = {en}
}
@incollection{FelberAburaiaWoeberetal.,
  author    = {Felber, Stefan Otto and Aburaia, Mohamed and W{\"o}ber, Wilfried and Lackner, Maximilian},
  title     = {Parameter Optimization for the 3D Print of Thermo-Plastic Pellets with an Industrial Robot},
  series = {Digital Conversion on the Way to Industry 4.0},
  booktitle = {Digital Conversion on the Way to Industry 4.0},
  publisher      = {Fachhochschule Technikum Wien},
  pages     = {236 -- 247},
  subject      = {Thermo Plastics},
  language  = {en}
}
@article{RauerAburaiaWoeber,
  author    = {Rauer, Johannes and Aburaia, Mohamed and W{\"o}ber, Wilfried},
  title     = {Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Graspin},
  series = {Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020},
  journal   = {Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020},
  pages     = {2 -- 3},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{AbdankAburaiaWoeber,
  author    = {Abdank, Moritz and Aburaia, Mohamed and W{\"o}ber, Wilfried},
  title     = {Using-Colour-Based Object Detection for Pick and Place Applications},
  series = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna},
  volume    = {32},
  booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna},
  number    = {1},
  pages     = {0536 -- 0541},
  subject      = {Computer Vision},
  language  = {en}
}
@inproceedings{WoeberAburaiaAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich},
  title     = {Konferenz der Mechatronik-Plattform: Autonome mechatronische Systeme},
  series = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering},
  booktitle = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering},
  subject      = {Autonom},
  language  = {en}
}
@inproceedings{BucherAburaiaMarkletal.,
  author    = {Bucher, Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzalez-Gutierrez, Joamin and Lammer, Herfried},
  title     = {Poster Symposium on ADDitive Manufacturing and Innovative Technologies},
  series = {Symposium on ADDitive Manufacturing and Innovative Technologies},
  booktitle = {Symposium on ADDitive Manufacturing and Innovative Technologies},
  subject      = {Innovative Technologies},
  language  = {en}
}
@article{EngelhardtNowitzkiAburaiaOtrebskietal.,
  author    = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Otrebski, Richard and Rauer, Johannes and Orsolits, Horst},
  title     = {Research-based teaching in Digital Manufacturing and Robotics - the Digital Factory at the UAS Technikum Wien as a Case Example},
  series = {Procedia Manuf},
  journal   = {Procedia Manuf},
  subject      = {Teaching},
  language  = {en}
}
@article{AburaiaLacknerBucheretal.,
  author    = {Aburaia, Mohamed and Lackner, Maximilian and Bucher, Michael and Gonzalez-Gutierrez, Joamin and Zhang, Haiguang and Lammer, Herfried},
  title     = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament},
  series = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament," vol. 4, no. 1, p. 12, 2020},
  journal   = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament," vol. 4, no. 1, p. 12, 2020},
  subject      = {Production},
  language  = {en}
}
@inproceedings{WernerAburaiaRaschendorferaetal.,
  author    = {Werner, Jan and Aburaia, Mohamed and Raschendorfera, A and Lackner, Maximilian},
  title     = {MeshSlicer: A 3D-Printing software for printing 3D-models with a 6-axis industrial robot},
  series = {14th CIRP, Gulf of Naples, Italy, 2020},
  booktitle = {14th CIRP, Gulf of Naples, Italy, 2020},
  subject      = {3D},
  language  = {en}
}
@inproceedings{RauerAburaiaWoeber,
  author    = {Rauer, Johannes and Aburaia, Mohamed and W{\"o}ber, Wilfried},
  title     = {Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Grasping},
  series = {Austrian Robotics Workshop 2020},
  booktitle = {Austrian Robotics Workshop 2020},
  subject      = {Semi-Automatic},
  language  = {en}
}
@inproceedings{AburaiaLackner,
  author    = {Aburaia, Mohamed and Lackner, Maximilian},
  title     = {Parameter Optimization for the 3D Print of Thermo-plastic Pellets with an Industrial Robot},
  series = {International Symposium for Production Research 2020, Turkey},
  booktitle = {International Symposium for Production Research 2020, Turkey},
  subject      = {3D},
  language  = {en}
}
@inproceedings{KainrathAburaiaLackner,
  author    = {Kainrath, Martin and Aburaia, Mohamed and Lackner, Maximilian},
  title     = {Accuracy Improvement and Process Flow Adaption for Robot Machining},
  series = {International Symposium for Production Research 2020, Turkey},
  booktitle = {International Symposium for Production Research 2020, Turkey},
  subject      = {Robot},
  language  = {en}
}
@inproceedings{KeferWoeberSzuegyietal.,
  author    = {Kefer, Martin and W{\"o}ber, Wilfried and Szuegyi, Daniel and Kubinger, Wilfried},
  title     = {A Novel and Automated Circle Pattern Recognition Technique for Infra-Red Stero Camera Calibration},
  series = {Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications},
  booktitle = {Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications},
  pages     = {404 -- 410},
  subject      = {Pattern Recognition},
  language  = {en}
}
@techreport{ZelgerFechnerSetznageletal.,
  author    = {Zelger, Thomas and Fechner, Hubert and Setznagel, R. and Tabakovic, Momir},
  title     = {THEBAVOL: Anwendungen und Grenzen der THErmischen BAuteilaktivierung im großVOLumigen Geschoßbau},
  subject      = {Building Parts},
  language  = {de}
}
@inproceedings{KrieglerWoeber,
  author    = {Kriegler, Andreas and W{\"o}ber, Wilfried},
  title     = {Vision-based Docking of a Mobile Robot},
  series = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020},
  booktitle = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020},
  pages     = {6 -- 12},
  subject      = {Automation},
  language  = {en}
}
@inproceedings{Orsolits,
  author    = {Orsolits, Horst},
  title     = {Virtual Engineering Applied in a Digital Learning Factory},
  series = {Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region},
  booktitle = {Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region},
  subject      = {Virtual Engineering},
  language  = {de}
}