@inproceedings{DannerederPachschwoellAburaiaetal., author = {Dannereder, Florian and Pachschw{\"o}ll, Paul and Aburaia, Mohamed and Markl, Erich and Lackner, Maximilian and Engelhardt-Nowitzki, Corinna and Shooman, Diane}, title = {Development of a 3D-printed Bionic Hand with Muscle- and Force Control}, series = {Austrian Robotics Workshop 2018}, booktitle = {Austrian Robotics Workshop 2018}, subject = {Robotics}, language = {en} } @inproceedings{SchneiderZelgerTabakovic, author = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir}, title = {Combining bottom-up and top-down approaches to converge heterogeneous building data into a homogenous, interactive and expandable energy autonomy platform}, series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, subject = {Energy Autonomy}, language = {en} } @inproceedings{TabakovicvanSarkLouwenetal., author = {Tabakovic, Momir and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Arancon, Sofia and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza}, title = {Development of BIPV courseware for students and professionals}, series = {Proceeding: Austrian PV Conference}, booktitle = {Proceeding: Austrian PV Conference}, subject = {Course Material}, language = {en} } @inproceedings{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversation of waste heat from solid-fuel stove into electric energy using a high temperature thermoelectric generator compared to Bi2Te3 thermoelectric generator}, series = {Proceeding: ISEC 2018}, booktitle = {Proceeding: ISEC 2018}, subject = {Energy Conversion}, language = {en} } @techreport{TabakovicFechnerLeonhartsberger, author = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt}, title = {National Survey Report of PV Power Applications in Austria 2017}, series = {IEA- International Energy Agency}, journal = {IEA- International Energy Agency}, subject = {Photovoltaics}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714}, subject = {Bacteria}, language = {en} } @book{LacknerGrabowStadler, author = {Lackner, Maximilian and Grabow, Wilhelm and Stadler, Philipp}, title = {Handbook of Online and Near-real-time Methods in Microbiology}, publisher = {Fachhochschule Technikum Wien}, subject = {Microbiology}, language = {en} } @article{AaliyaSunoojSriRajkumaretal., author = {Aaliya, Basheer and Sunooj, Kappat Valiyapeediyekkal and Sri Rajkumar, Chillapalli Babu and Navaf, Muhammed and Akhila, Plachikkattu Parambil and Sudheesh, Cherakkathodi and George, Johnsy and Lackner, Maximilian}, title = {Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments}, series = {Polymers}, volume = {13}, journal = {Polymers}, number = {3855}, abstract = {Talipot starch, a non-conventional starch source with a high yield (76\%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P-O-C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4\%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08\%.}, subject = {Talipot starch}, language = {en} } @article{HaasMarklLackner, author = {Haas, Theodor and Markl, Erich and Lackner, Maximilian}, title = {Innovative use of waste tyres: Noise-barriers and geoengineering}, series = {World Journal of Advanced Engineering Technology and Sciences}, journal = {World Journal of Advanced Engineering Technology and Sciences}, subject = {Engineering}, language = {en} } @misc{Lackner, author = {Lackner, Maximilian}, title = {PBAT - A versatile bioplastics}, subject = {Bioplastics}, language = {en} } @incollection{TabakovicOttoCommerelletal., author = {Tabakovic, Momir and Otto, Marc-Oliver and Commerell, Walter and Csapo, Csilla and Vermaak, Herman}, title = {Increase industry cooperation in post graduate education via OpenLab's and MobileLab's in South Africa}, series = {Smart Education and e-Learning 2020}, booktitle = {Smart Education and e-Learning 2020}, publisher = {Springer Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {623 -- 629}, abstract = {This paper will present the concepts of the EURYDICE project funded by the Erasmus + program. Within this project the focus on renewable energies with the overall goal to enhance employability. The energy generation landscape in South Africa is undergoing a fundamental transition, as the vision of the energy strategy is to contribute to an affordable energy for all. This vision will be supported by innovative labs and portals which will be developed within this project. One of the goals is closing the gap between TVET (Technical and Vocational Education and Training Colleges) studies and diploma study by the definition of industrial experience requirements for University of Technology (UoT) diploma students. This leads to an increased preparedness and "studyability" of UoT diploma students. Industrial stakeholders will be integrated into the process. The project will develop an "Industrial Portal" as a working tool. To increase industry cooperation in post graduate education "OpenLabs" and "MobileLabs" will be developed within the project. It is intended that industry brings industrial problems into the "Labs", which will then be solved by the students.}, subject = {Mobile Labs}, language = {en} } @inproceedings{TabakovicWuerflGuerraetal., author = {Tabakovic, Momir and W{\"u}rfl, Marlen and Guerra, Eduardo and Gutleder, Miriam}, title = {Operating models for PV systems in existing residential building complexes in Vienna - challenges and opportunities}, series = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, booktitle = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, abstract = {This paper aims to identify challenges and opportunities that are associated with installing PV (Photovoltaic) systems in existing residential building complexes in Vienna. For this purpose, a project-oriented approach was chosen and hence a representative residential building complex in Vienna was chosen and analyzed to demonstrate the challenges that are associated with such projects. Furthermore, a particular focus lies on exploring different operating models that are available when it comes to the execution of such a project. As this paper builds on the rather novel topic of exploring new operating models for installing PV systems on existing residential building complexes in Vienna, many further suggestions for research can be identified that exceed the scope of this paper.}, subject = {Photovoltaics}, language = {en} } @article{LacknerOuattaraGharaeetal., author = {Lackner, Maximilian and Ouattara, Ibrahim and Gharae, Norouz Ali and Abolhassani, Raymond}, title = {Clean drinking water global scarcity: a review}, series = {Journal of Water Science and Engineering}, journal = {Journal of Water Science and Engineering}, subject = {Water}, language = {en} } @inproceedings{Lackner, author = {Lackner, Maximilian}, title = {Combination of Devulcanization and Reactive Extrusion for Value-Added Rubber Recycling}, series = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, subject = {Recycling}, language = {en} } @article{ZanglPingitzerLembacheretal., author = {Zangl, Sabine and Pingitzer, D. and Lembacher, Harald and Lackner, Maximilian}, title = {Carbon footprint reduction in households using professional services - example of laundry cleaning}, series = {Pubtexto}, journal = {Pubtexto}, subject = {Sustainability}, language = {en} } @book{Lackner, author = {Lackner, Maximilian}, title = {Chemical Engineering Vocabulary: Bilingual}, publisher = {Fachhochschule Technikum Wien}, subject = {Chemical Engineering}, language = {en} } @inproceedings{TabakovicSchneiderLaurentetal., author = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegund}, title = {Korneuburgs way2smart - mobility concept, energy platform and social interaction}, series = {Proceedings of the 22nd International Conference on Urban Planning, Regional Development and Information Society (REAL CORP 2017 - PANTA RHEI)}, booktitle = {Proceedings of the 22nd International Conference on Urban Planning, Regional Development and Information Society (REAL CORP 2017 - PANTA RHEI)}, subject = {Energy Market}, language = {en} } @article{SpitzerSonnleitnerKempeLackner, author = {Spitzer-Sonnleitner, Birgit and Kempe, Andre and Lackner, Maximilian}, title = {Influence of halide solutions on collagen networks - measurements of physical properties by atomic force microscopy (AFM)}, series = {Influence of halide solutions on collagen networks}, journal = {Influence of halide solutions on collagen networks}, subject = {Collagen Networks}, language = {en} } @inproceedings{BululukovaWahl, author = {Bululukova, Darya and Wahl, Harald}, title = {Towards a Sustainable Smart Cities Integration in Teaching and Research}, series = {Proceedings of the 4th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS, 101-106, 2015, Lisbon, Portugal}, booktitle = {Proceedings of the 4th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS, 101-106, 2015, Lisbon, Portugal}, subject = {Smart City}, language = {en} } @article{GraselBaptistaTragner, author = {Grasel, Bernhard and Baptista, Jos{\´e} and Tragner, Manfred}, title = {Supraharmonic and Harmonic Emissions of a Bi-Directional V2G Electric Vehicle Charging Station and Their Impact to the Grid Impedance}, series = {Energies}, volume = {15}, journal = {Energies}, number = {8}, doi = {10.3390/en15082920}, abstract = {Bidirectional electric vehicle supply equipment and charging stations (EVSE) offer new business models and can provide services to the electrical grid. The smart grid lab in Vienna gives unique testing possibilities of future smart grids, as different type of electrical equipment can be operated at a reconstructed, well-known distribution grid. In this work the harmonic and supraharmonic emissions of a bidirectional EVSE are measured according to IEC61000-4-7 and IEC61000-4-30 Ed3 standard as well as the high-frequency grid impedance. In addition, the efficiency and the power factor are determined at various operating points. Although THDi at nominal power (10 kW) is very low and the efficiency and power factor is very high, at low power levels the opposite situation arise. Supraharmonic emissions remain stable independent of the charging/discharging power, and both wideband and narrowband emissions occur. The additional capacitance when connecting the EVSE impacts the high-frequency grid impedance substantially and generates resonance points.}, subject = {power quality}, language = {en} } @inproceedings{LeonhartsbergerMeiselPicleretal., author = {Leonhartsberger, Kurt and Meisel, M. and Picler, M. and Schidler, Susanne and Fotiadis, Lampros and Xypolytou, E. and Werner, Andrea}, title = {System relevant Applications for Battery Storage Systems}, series = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, booktitle = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, subject = {Battery Storage Systems}, language = {en} } @inproceedings{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Rechberger, P. and Moor, D. and Aichinger, Martin}, title = {Comparative Performance Measurements of Identical BIPV-Elements in Different Climatic Environments - A Round Robin Action within the IEA PVPS Task 15 Collaboration}, series = {35th European Photovoltaic Solar Energy Conference and Exhibition}, booktitle = {35th European Photovoltaic Solar Energy Conference and Exhibition}, isbn = {3-936338-50-7}, subject = {Photovoltaics}, language = {en} } @article{ZhangYaoMaetal., author = {Zhang, Hang and Yao, Yuan and Ma, Yingxin and Lackner, Maximilian and Jiang, Yunliang}, title = {A 3D printing tool-path generation strategy based on the partition of principal stress field for fused filament fabrication}, series = {The International Journal of Advanced Manufacturing Technology}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {122}, pages = {1719 -- 1735}, abstract = {In order to enhance the strength of 3D-printed parts made of polymer materials and reduce the anisotropy caused by the fused filament fabrication process, this paper proposes an inter-layer interleaved composite path planning method based on the directional partition of the principal stress field. This method not only ensures intra-layer reinforcement under specific working conditions but also increases the strength of the printed part by enhancing the adhesion of adjacent layers through staggered filling between layers. The mechanical performance is improved by 10 to 30\% compared to other conventional filling patterns such as the zigzag filling algorithm. Inter-layer interleaved composite enhancement path planning method is suitable for path planning of structures with complex shapes and is easily integrated into existing general computer-aided engineering processes.}, subject = {Principal stress field}, language = {en} } @article{WoeberCurtoTibihikaetal., author = {W{\"o}ber, Wilfried and Curto, Manuel and Tibihika, Papius D. and Meulenboek, Paul and Alemayehu, Esayas and Mehnen, Lars and Meimberg, Harald and Sykacek, Peter}, title = {Identifying geographically differentiated features of Ethopian Nile tilapia (Oreochromis niloticus) morphology with machine learning}, series = {PlosONE}, volume = {16}, journal = {PlosONE}, number = {4}, subject = {Machine Learning}, language = {en} } @inproceedings{WoeberTibihikaOlaverriMonrealetal., author = {W{\"o}ber, Wilfried and Tibihika, Papius D and Olaverri-Monreal, Cristina and Mehnen, Lars and Sykacek, Peter and Meimberg, Harald}, title = {Comparison of Unsupervised Learning Methods for Natural Image Processing}, series = {Biodiversity Information Science and Standards}, booktitle = {Biodiversity Information Science and Standards}, number = {3}, subject = {Machine Learning}, language = {en} } @inproceedings{WoeberSzuegyiKubingeretal., author = {W{\"o}ber, Wilfried and Szuegyi, Daniel and Kubinger, Wilfried and Mehnen, Lars}, title = {A principal component analysis based object detection for thermal infra-red images}, series = {Proceedings of the 55th International Symposium ELMAR}, booktitle = {Proceedings of the 55th International Symposium ELMAR}, subject = {Principal Component Analysis}, language = {en} } @misc{SpulakOtrebskiKubinger, author = {Spulak, David and Otrebski, Richard and Kubinger, Wilfried}, title = {Object Tracking by Combining Supervised and Adaptive Online Learning through Sensor Fusion of Multiple Stereo Camera Systems}, subject = {Object Tracking}, language = {en} } @article{TaghaviTaghizadehMehmannavazetal., author = {Taghavi, Marziyeh and Taghizadeh, Akbar and Mehmannavaz, Yousef and Hosseinkhani, Ali and Mohammadzadeh, Hamid and Macit, Muhlis and Palangi, Valiollah and Lackner, Maximilian}, title = {Degradability of Vicia ervilia Grain Using In Situ and CNCPS Methods, and Model-Based Analysis of Its Ruminal Degradation}, series = {Fermentation}, volume = {9}, journal = {Fermentation}, number = {5}, doi = {10.3390/fermentation9050419}, abstract = {Using nylon bag techniques, Cornell net carbohydrates and protein systems (CNCPS), and scanning electron microscopy, the authors examined the digestibility and structure of Vicia ervilia (ervil, bitter vetch) after steam flaking, roasting, and microwave processing. During the in situ technique, the samples were incubated at 0, 2, 4, 6, 8, 12, 16, 24, 36, and 48 h. For the description of the ruminal DM (dry matter) and CP (crude protein) degradation kinetics of treated and untreated Vicia ervilia, different models were selected as the best fit for the dry matter (DM) and crude protein (CP) degradation parameters of steam flaked samples. The results showed that both the steam flaking and microwave treatment samples contained high levels of non-protein nitrogen and buffer soluble protein, respectively. In comparison with steam flaking and microwave treatment, roasting decreased and increased the buffer soluble protein and neutral detergent insoluble protein, respectively. The control treatments showed the highest levels of neutral detergent soluble protein and the lowest levels of acid detergent soluble protein. Moreover, steam flaking and roasting decreased and increased the amount of acid detergent insoluble protein, respectively. When using dry heat (microwave and roasting), the acid detergent soluble and insoluble protein fractions were increased. As a result of this experiment, the nitrogen fractions were altered using heat processing. Hence, protein fermented feed and ruminal fermentation conditions can be expressed using these results.}, subject = {Vicia ervilia}, language = {en} } @article{AhmadzadehHosseinkhaniPalangietal., author = {Ahmadzadeh, Leila and Hosseinkhani, Ali and Palangi, Valiollah and Lackner, Maximilian}, title = {Supplementary Feed Additives Can Improve Lamb Performance in Terms of Birth Weight, Body Size, and Survival Rate}, series = {Animals}, journal = {Animals}, number = {13 / 6}, doi = {10.3390/ani13060993}, subject = {feed restriction}, language = {en} } @inproceedings{WoeberAburaiaOlaverriMonreal, author = {W{\"o}ber, Wilfried and Aburaia, Mohamed and Olaverri-Monreal, Cristina}, title = {Classification of Streetsigns Using Gaussian Process Latent Variable Models}, series = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria}, booktitle = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria}, subject = {Streetsigns}, language = {en} } @inproceedings{TabakovicBululukovaWahl, author = {Tabakovic, Momir and Bululukova, Darya and Wahl, Harald}, title = {Integrative Secondary Education Programmes and Research in Smart Cities Context}, series = {Proceedings of the REAL CORP 2016}, booktitle = {Proceedings of the REAL CORP 2016}, subject = {Smart City}, language = {en} } @article{MuehleisenEderVoronkoetal., author = {Muehleisen, Wolfgang and Eder, Gabriele C. and Voronko, Yuliya and Spielberger, Markus and Sonnleitner, Horst and Kn{\"o}bl, Karl and Ebner, Rita and Ujvari, Guszt{\´a}v and Hirschl, Christina}, title = {Outdoor detection and visualization of hailstorm damages of photovoltaic plants}, series = {Renewable Energy}, journal = {Renewable Energy}, number = {118}, pages = {138 -- 145}, subject = {Photovoltaics}, language = {en} } @inproceedings{PapaKaselautzkeRadingeretal., author = {Papa, Maximilian and Kaselautzke, David and Radinger, Thomas and Stuja, Kemajl}, title = {Development of a safety industry 4.0 production environment}, series = {28th DAAAM International Symposium on Intelligent Manufacturing and Automation}, booktitle = {28th DAAAM International Symposium on Intelligent Manufacturing and Automation}, subject = {Saftey}, language = {en} } @book{LacknerChenSuzuki, author = {Lackner, Maximilian and Chen, Wei-Ying, and Suzuki, Toshio}, title = {Handbook of Climate Change Mitigation and Adaptation}, publisher = {Fachhochschule Technikum Wien}, subject = {Climate Change}, language = {en} } @inproceedings{AngelOrsolitsGarcia, author = {Angel, Nikolaus and Orsolits, Horst and Garcia, Jose}, title = {Developing an AR Based Tool for Teaching Motion Analysis on Assembly Tasks}, series = {2022 8th International Conference of the Immersive Learning Research Network (iLRN), 2022}, booktitle = {2022 8th International Conference of the Immersive Learning Research Network (iLRN), 2022}, isbn = {978-1-7348-9952-8}, doi = {10.23919/iLRN55037.2022.9815914}, pages = {7}, abstract = {Engineering education courses look into processes, equipment and people in order to prepare students to tackle problems in their careers. In manufacturing industry, it is important to use virtual manufacturing tools to analyse processes. This includes both equipment and people. Assembly operations can involve human operators. Modular arrangements of predetermined time standards MODAPTS is a predetermined motion time system method used to analyse assembly processes. Augmented reality (AR) is increasingly being used for industrial processes as well as in education. AR application have been used for maintenance training as a useful way to overly digital instructions to a trainee whilst being able to look at a real object. This is potential beneficial for education. This paper presents the evaluation of a prototype to test a predetermined time standards model using an AR application. An evaluation was carried out comparing AR-based instructions in tablet and PC monitor and paper-written instructions. The results of evaluating the prototype encourage their use as an educational tool in engineering courses.}, subject = {Augmented Reality}, language = {en} }