@article{EngelhardtNowitzkiAburaiaOtrebskietal.,
  author    = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Otrebski, Richard and Rauer, Johannes and Orsolits, Horst},
  title     = {Research-based teaching in Digital Manufacturing and Robotics - the Digital Factory at the UAS Technikum Wien as a Case Example},
  series = {Procedia Manuf},
  journal   = {Procedia Manuf},
  subject      = {Teaching},
  language  = {en}
}
@article{AburaiaLacknerBucheretal.,
  author    = {Aburaia, Mohamed and Lackner, Maximilian and Bucher, Michael and Gonzalez-Gutierrez, Joamin and Zhang, Haiguang and Lammer, Herfried},
  title     = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament},
  series = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament," vol. 4, no. 1, p. 12, 2020},
  journal   = {A Production Method for Standardized Continuous Fiber Reinforced FFF Filament," vol. 4, no. 1, p. 12, 2020},
  subject      = {Production},
  language  = {en}
}
@inproceedings{WernerAburaiaRaschendorferaetal.,
  author    = {Werner, Jan and Aburaia, Mohamed and Raschendorfera, A and Lackner, Maximilian},
  title     = {MeshSlicer: A 3D-Printing software for printing 3D-models with a 6-axis industrial robot},
  series = {14th CIRP, Gulf of Naples, Italy, 2020},
  booktitle = {14th CIRP, Gulf of Naples, Italy, 2020},
  subject      = {3D},
  language  = {en}
}
@inproceedings{RauerAburaiaWoeber,
  author    = {Rauer, Johannes and Aburaia, Mohamed and W{\"o}ber, Wilfried},
  title     = {Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Grasping},
  series = {Austrian Robotics Workshop 2020},
  booktitle = {Austrian Robotics Workshop 2020},
  subject      = {Semi-Automatic},
  language  = {en}
}
@inproceedings{AburaiaLackner,
  author    = {Aburaia, Mohamed and Lackner, Maximilian},
  title     = {Parameter Optimization for the 3D Print of Thermo-plastic Pellets with an Industrial Robot},
  series = {International Symposium for Production Research 2020, Turkey},
  booktitle = {International Symposium for Production Research 2020, Turkey},
  subject      = {3D},
  language  = {en}
}
@inproceedings{KainrathAburaiaLackner,
  author    = {Kainrath, Martin and Aburaia, Mohamed and Lackner, Maximilian},
  title     = {Accuracy Improvement and Process Flow Adaption for Robot Machining},
  series = {International Symposium for Production Research 2020, Turkey},
  booktitle = {International Symposium for Production Research 2020, Turkey},
  subject      = {Robot},
  language  = {en}
}
@inproceedings{KeferWoeberSzuegyietal.,
  author    = {Kefer, Martin and W{\"o}ber, Wilfried and Szuegyi, Daniel and Kubinger, Wilfried},
  title     = {A Novel and Automated Circle Pattern Recognition Technique for Infra-Red Stero Camera Calibration},
  series = {Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications},
  booktitle = {Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications},
  pages     = {404 -- 410},
  subject      = {Pattern Recognition},
  language  = {en}
}
@techreport{ZelgerFechnerSetznageletal.,
  author    = {Zelger, Thomas and Fechner, Hubert and Setznagel, R. and Tabakovic, Momir},
  title     = {THEBAVOL: Anwendungen und Grenzen der THErmischen BAuteilaktivierung im großVOLumigen Geschoßbau},
  subject      = {Building Parts},
  language  = {de}
}
@inproceedings{KrieglerWoeber,
  author    = {Kriegler, Andreas and W{\"o}ber, Wilfried},
  title     = {Vision-based Docking of a Mobile Robot},
  series = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020},
  booktitle = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020},
  pages     = {6 -- 12},
  subject      = {Automation},
  language  = {en}
}
@inproceedings{Orsolits,
  author    = {Orsolits, Horst},
  title     = {Virtual Engineering Applied in a Digital Learning Factory},
  series = {Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region},
  booktitle = {Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region},
  subject      = {Virtual Engineering},
  language  = {de}
}
@misc{Lackner,
  author    = {Lackner, Maximilian},
  title     = {Cyanobacteria as model organism for PHB production},
  subject      = {Bacteria},
  language  = {en}
}
@inproceedings{WoeberSupperAschaueretal.,
  author    = {W{\"o}ber, Wilfried and Supper, Georg and Aschauer, Christian and Gronauer, Andreas and Tomic, Dana Kathrin and H{\"o}rmann, Sandra},
  title     = {Entwicklung eines auf semantischer Technologie basierenden Analysesystems zur {\"U}berwachung der Wasserversorgung von landwirtschaftlichen Nutzfl{\"a}chen},
  series = {Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexit{\"a}t versus Bedienbarkeit/Mensch-Maschine-Schnittstellen},
  booktitle = {Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexit{\"a}t versus Bedienbarkeit/Mensch-Maschine-Schnittstellen},
  abstract  = {Eine ressourcenschonende Bew{\"a}sserung von Nutzpflanzen wird durch den Klimawandel in den n{\"a}chsten Jahren immer gr{\"o}ßere Bedeutung gewinnen. Eine M{\"o}glichkeit, das f{\"u}r Pflanzen zur Verf{\"u}gung stehende Wasserpotential beurteilen zu k{\"o}nnen, ist die Nutzung von klimatischen Faktoren und Computermodellen. In diesem Beitrag wird die Entwicklung eines auf dem Forschungsprojekt agriOpenLink basierten Softwaresystems zur Absch{\"a}tzung der Evapotranspiration auf einer landwirtschaftlichen Nutzfl{\"a}che beschrieben. Der Fokus dieses Berichts liegt auf dem Softwareframework, welches auf semantischer Technologie basiert und formalisiertes landwirtschaftliches Wissen sowie Computermodelle zur Absch{\"a}tzung der Evapotranspiration beinhaltet. Es werden erste experimentelle Ergebnisse diskutiert und die semantische Technologie bez{\"u}glich praktischer Nutzung evaluiert.},
  subject      = {Semantic Modelling},
  language  = {de}
}
@misc{TabakovicSchneiderLaurentetal.,
  author    = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegund},
  title     = {Korneuburgs way2smart - mobility concept, energy platform and social interaction},
  subject      = {Energy Market},
  language  = {en}
}
@inproceedings{Lackner,
  author    = {Lackner, Maximilian},
  title     = {Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production},
  series = {Webinar on Biopolymers \& Bioplastics, Meetings International,},
  booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,},
  subject      = {Process Engineering},
  language  = {en}
}
@article{Lackner,
  author    = {Lackner, Maximilian},
  title     = {Industrial Engineering Management - THE key skill for the Digital Age},
  series = {The International Journal of Engineering and Science (THE IJES)},
  journal   = {The International Journal of Engineering and Science (THE IJES)},
  subject      = {Management},
  language  = {en}
}
@inproceedings{TabakovicFechnervanSarketal.,
  author    = {Tabakovic, Momir and Fechner, Hubert and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Aranc{\´o}n, Sofia and Geourghiou, George and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza and Ioannidou, Monica},
  title     = {Development of BIPV courseware for students and professionals},
  series = {Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017)},
  booktitle = {Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017)},
  pages     = {2895 -- 2899},
  subject      = {Education},
  language  = {en}
}
@misc{TabakovicFechnervanSarketal.,
  author    = {Tabakovic, Momir and Fechner, Hubert and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Aranc{\´o}n, Sofia and Geourghiou, George and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza and Ioannidou, Monica},
  title     = {Development of BIPV courseware for students and professionals},
  subject      = {Education},
  language  = {en}
}
@misc{SchneiderTabakovic,
  author    = {Schneider, Simon and Tabakovic, Momir},
  title     = {Aktueller Stand und Zukunft von stadteigenen Geb{\"a}uden einer Kleinstadt mit energieautonomen Leitbild: Verbrauch, Berechnung und Potential im Rahmen von Smart City Demo Way2Smart},
  subject      = {Smart City},
  language  = {de}
}
@misc{DannerederEngelhardtNowitzkiMarkletal.,
  author    = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane},
  title     = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{WoeberAburaiaAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich},
  title     = {Digital Manufacturing \& Robotics im Department Industrial Engineering},
  series = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme},
  booktitle = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme},
  subject      = {Digital Manufacturing},
  language  = {de}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Status and outlook for building integrated photovoltaics(BIPV) in relation to educational needs in the BIPV sector},
  subject      = {Photovoltaics},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Integrative Secondary Education Programmes and Research in Smart Cities Context},
  subject      = {Smart City},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Welche Speicher und Netze braucht die Energiewende?},
  subject      = {Energy Storage},
  language  = {de}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {EU-ASCIN - Projektpr{\"a}sentation},
  subject      = {Smart City},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {EU-ASCIN - Projektpr{\"a}sentation},
  subject      = {Smart City},
  language  = {de}
}
@techreport{vanSarkLouwenGeourghiouetal.,
  author    = {van Sark, Wilfried and Louwen, Atse and Geourghiou, George and Makrides, George and Loucaidou, Eliza and Ioannidou, Monica and Fechner, Hubert and Tabakovic, Momir and Weiss, Ingrid and Aranc{\´o}n, Sofia},
  title     = {Review of the BIPV market and education needs in the field - Framework and Requirements' Analysis},
  subject      = {Photovoltaics},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Smart Cities Education as Mobility, Energy \& ICT Hub},
  subject      = {Smart City},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Smart Grids at the University AS Technikum Vienna},
  subject      = {Smart Grids},
  language  = {en}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {Cyanobacteria for PHB Bioplastics Production: A Review},
  series = {IntechOpen},
  journal   = {IntechOpen},
  pages     = {10},
  abstract  = {Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78\% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature.},
  subject      = {Bio-based Plastics},
  language  = {en}
}
@article{KnappLacknerMarkl,
  author    = {Knapp, Alexander and Lackner, Maximilian and Markl, Erich},
  title     = {Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning},
  series = {International Journal of Advance Engineering and Research Development},
  journal   = {International Journal of Advance Engineering and Research Development},
  issn      = {2348-4470},
  pages     = {84 -- 86},
  abstract  = {Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents.},
  subject      = {Floor cleaning},
  language  = {en}
}
@misc{KamravamaneshPflueglLackneretal.,
  author    = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph},
  title     = {Bioprocess Development for Sustainable poly-β-hydroxybutyrate Production},
  subject      = {Bioplastics},
  language  = {en}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {PHB - Bio Based and Biodegradable Replacement for PP: A Review},
  series = {Novel Techniques in Nutrition and Food Science},
  volume    = {2},
  journal   = {Novel Techniques in Nutrition and Food Science},
  number    = {2},
  pages     = {4},
  subject      = {Bio Degradable},
  language  = {en}
}
@book{deVriesMarklLackner,
  author    = {de Vries, Sytse and Markl, Erich and Lackner, Maximilian},
  title     = {Energy efficiency management in the shipping industry},
  publisher = {Lambert Academic Publishing},
  isbn      = {978 3 659 71981 3},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Transportation},
  language  = {en}
}
@inproceedings{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  series = {th International Conference on Smart Materials and Structures},
  booktitle = {th International Conference on Smart Materials and Structures},
  publisher = {Material Sci Eng 2018 (7)},
  subject      = {Robotics},
  language  = {en}
}
@misc{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{LacknerZanglLembacheretal.,
  author    = {Lackner, Maximilian and Zangl, Sabine and Lembacher, Harald and R{\"u}ttinger, Norbert and Fochler, Claus},
  title     = {Non-wovens and recycling - An overview, International Conference on Recycling and Waste Water Management},
  series = {International Conference on Recycling and Waste Water Management},
  booktitle = {International Conference on Recycling and Waste Water Management},
  subject      = {Environment},
  language  = {en}
}
@article{SchneiderBartlmaeLeiboldetal.,
  author    = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}ffmann, Petra and Tabakovic, Momir and Zelger, Thomas},
  title     = {New assessment method for buildings and districts towards "Net Zero Energy Buildings" compatible with the energy scenario 2050},
  series = {Corp},
  journal   = {Corp},
  pages     = {10},
  subject      = {Energy Technologies},
  language  = {en}
}
@inproceedings{TabakovicSchneiderLeiboldetal.,
  author    = {Tabakovic, Momir and Schneider, Simon and Leibold, Jens and Zelger, Thomas and Bartlm{\"a}, Nadja and Holzer, Peter and Sch{\"o}ffmann, Petra},
  title     = {Way to positive energy districts in Vienna},
  series = {Mission Innovation Austria},
  booktitle = {Mission Innovation Austria},
  subject      = {Energy Technologies},
  language  = {en}
}
@incollection{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Development and Implementation of BIPV Courseware for Higher Education and Professionals},
  series = {Smart Education and e-Learning},
  booktitle = {Smart Education and e-Learning},
  publisher = {Springer},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Education},
  language  = {en}
}
@inproceedings{RauhOrsolits,
  author    = {Rauh, Sebastian and Orsolits, Horst},
  title     = {Perspectives on Virtual Reality in Higher Education for Robotics and Related Engineering Disciplines},
  series = {Robotics in Education (International Conference on Robotics in Education)},
  booktitle = {Robotics in Education (International Conference on Robotics in Education)},
  publisher = {Springer},
  isbn      = {978-3-031-12848-6},
  pages     = {39 -- 51},
  abstract  = {Industrial engineering education has a strong focus on and affinity towards technology. While Virtual Reality hardware and applications advance and learning behaviour changes, it is particularly interesting to determine the possible use of Virtual Reality for teaching engineering subjects, for example fundamentals of robotics. This paper presents a study which examines the possible use of Virtual Reality learning environments at higher learning institutions. The study shows perspectives of students and lecturers and identifies opportunities and challenges for the use of Virtual Reality in industrial engineering education. The results of the indicated study show that the participants have a positive attitude towards Virtual Reality and strong motivation for in class use. The study results also suggest, that Virtual Reality content creation should be included in engineering curricula.},
  subject      = {Virtual reality},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves},
  subject      = {Generator},
  language  = {en}
}
@book{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Analyze and optimize the prototype of a thermoelectric generator: as an electrical renewable power source for biomass stoves},
  publisher = {AV Akademikerverlag},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Biomass},
  language  = {en}
}
@misc{MarklOrsolitsStojicic,
  author    = {Markl, Erich and Orsolits, Horst and Stojicic, Dario},
  title     = {Virtuelle Technologien in der Robotik},
  subject      = {Robotics},
  language  = {de}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Way2Smart Korneuburg: Smart Cities Projekt},
  subject      = {Smart City},
  language  = {de}
}
@phdthesis{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Direct conversion of waste heat into electric energy by thermoelectric generators},
  school      = {Fachhochschule Technikum Wien},
  abstract  = {The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber.},
  subject      = {Energy Technologies},
  language  = {en}
}
@misc{LacknerKamravamaneshMarkletal.,
  author    = {Lackner, Maximilian and Kamravamanesh, Donya and Markl, Erich and Engelhardt-Nowitzki, Corinna and Herwig, Christoph},
  title     = {Optimization of process parameters to enhance Polyhydroxyalkanoate accumulation in a unicellular cyanobacterium using multivariate experimental design approach},
  subject      = {Bacteria},
  language  = {en}
}
@misc{OrsolitsGallasch,
  author    = {Orsolits, Horst and Gallasch, Andreas},
  title     = {Make a 25 Year old Claw Crane Digital with Thingworx},
  subject      = {Crane},
  language  = {en}
}
@misc{Orsolits,
  author    = {Orsolits, Horst},
  title     = {Using AR to Build a Digital Twin Robotics Laboratory},
  organization    = {PTC Academic Session},
  subject      = {Augmented Reality},
  language  = {en}
}
@inproceedings{ChiritaTabakovic,
  author    = {Chirita, Cristian and Tabakovic, Momir},
  title     = {Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber},
  series = {X International Conference Industrial Engineering and Environmental Protection},
  booktitle = {X International Conference Industrial Engineering and Environmental Protection},
  pages     = {143 -- 151},
  subject      = {Generators},
  language  = {en}
}
@misc{KamravamaneshPflueglLackneretal.,
  author    = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph},
  title     = {Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714},
  subject      = {Bacteria},
  language  = {en}
}