@misc{Lackner, author = {Lackner, Maximilian}, title = {Cyanobacteria as model organism for PHB production}, subject = {Bacteria}, language = {en} } @inproceedings{WoeberSupperAschaueretal., author = {W{\"o}ber, Wilfried and Supper, Georg and Aschauer, Christian and Gronauer, Andreas and Tomic, Dana Kathrin and H{\"o}rmann, Sandra}, title = {Entwicklung eines auf semantischer Technologie basierenden Analysesystems zur {\"U}berwachung der Wasserversorgung von landwirtschaftlichen Nutzfl{\"a}chen}, series = {Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexit{\"a}t versus Bedienbarkeit/Mensch-Maschine-Schnittstellen}, booktitle = {Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexit{\"a}t versus Bedienbarkeit/Mensch-Maschine-Schnittstellen}, abstract = {Eine ressourcenschonende Bew{\"a}sserung von Nutzpflanzen wird durch den Klimawandel in den n{\"a}chsten Jahren immer gr{\"o}ßere Bedeutung gewinnen. Eine M{\"o}glichkeit, das f{\"u}r Pflanzen zur Verf{\"u}gung stehende Wasserpotential beurteilen zu k{\"o}nnen, ist die Nutzung von klimatischen Faktoren und Computermodellen. In diesem Beitrag wird die Entwicklung eines auf dem Forschungsprojekt agriOpenLink basierten Softwaresystems zur Absch{\"a}tzung der Evapotranspiration auf einer landwirtschaftlichen Nutzfl{\"a}che beschrieben. Der Fokus dieses Berichts liegt auf dem Softwareframework, welches auf semantischer Technologie basiert und formalisiertes landwirtschaftliches Wissen sowie Computermodelle zur Absch{\"a}tzung der Evapotranspiration beinhaltet. Es werden erste experimentelle Ergebnisse diskutiert und die semantische Technologie bez{\"u}glich praktischer Nutzung evaluiert.}, subject = {Semantic Modelling}, language = {de} } @misc{TabakovicSchneiderLaurentetal., author = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegund}, title = {Korneuburgs way2smart - mobility concept, energy platform and social interaction}, subject = {Energy Market}, language = {en} } @inproceedings{Lackner, author = {Lackner, Maximilian}, title = {Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production}, series = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, subject = {Process Engineering}, language = {en} } @article{Lackner, author = {Lackner, Maximilian}, title = {Industrial Engineering Management - THE key skill for the Digital Age}, series = {The International Journal of Engineering and Science (THE IJES)}, journal = {The International Journal of Engineering and Science (THE IJES)}, subject = {Management}, language = {en} } @inproceedings{TabakovicFechnervanSarketal., author = {Tabakovic, Momir and Fechner, Hubert and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Aranc{\´o}n, Sofia and Geourghiou, George and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza and Ioannidou, Monica}, title = {Development of BIPV courseware for students and professionals}, series = {Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017)}, booktitle = {Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017)}, pages = {2895 -- 2899}, subject = {Education}, language = {en} } @misc{TabakovicFechnervanSarketal., author = {Tabakovic, Momir and Fechner, Hubert and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Aranc{\´o}n, Sofia and Geourghiou, George and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza and Ioannidou, Monica}, title = {Development of BIPV courseware for students and professionals}, subject = {Education}, language = {en} } @misc{SchneiderTabakovic, author = {Schneider, Simon and Tabakovic, Momir}, title = {Aktueller Stand und Zukunft von stadteigenen Geb{\"a}uden einer Kleinstadt mit energieautonomen Leitbild: Verbrauch, Berechnung und Potential im Rahmen von Smart City Demo Way2Smart}, subject = {Smart City}, language = {de} } @misc{DannerederEngelhardtNowitzkiMarkletal., author = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane}, title = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control}, subject = {Robotics}, language = {en} } @inproceedings{WoeberAburaiaAburaiaetal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich}, title = {Digital Manufacturing \& Robotics im Department Industrial Engineering}, series = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme}, booktitle = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme}, subject = {Digital Manufacturing}, language = {de} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Status and outlook for building integrated photovoltaics(BIPV) in relation to educational needs in the BIPV sector}, subject = {Photovoltaics}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Integrative Secondary Education Programmes and Research in Smart Cities Context}, subject = {Smart City}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Welche Speicher und Netze braucht die Energiewende?}, subject = {Energy Storage}, language = {de} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {EU-ASCIN - Projektpr{\"a}sentation}, subject = {Smart City}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {EU-ASCIN - Projektpr{\"a}sentation}, subject = {Smart City}, language = {de} } @techreport{vanSarkLouwenGeourghiouetal., author = {van Sark, Wilfried and Louwen, Atse and Geourghiou, George and Makrides, George and Loucaidou, Eliza and Ioannidou, Monica and Fechner, Hubert and Tabakovic, Momir and Weiss, Ingrid and Aranc{\´o}n, Sofia}, title = {Review of the BIPV market and education needs in the field - Framework and Requirements' Analysis}, subject = {Photovoltaics}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Smart Cities Education as Mobility, Energy \& ICT Hub}, subject = {Smart City}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Smart Grids at the University AS Technikum Vienna}, subject = {Smart Grids}, language = {en} } @article{MarklGruenbichlerLackner, author = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian}, title = {Cyanobacteria for PHB Bioplastics Production: A Review}, series = {IntechOpen}, journal = {IntechOpen}, pages = {10}, abstract = {Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78\% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature.}, subject = {Bio-based Plastics}, language = {en} } @article{KnappLacknerMarkl, author = {Knapp, Alexander and Lackner, Maximilian and Markl, Erich}, title = {Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning}, series = {International Journal of Advance Engineering and Research Development}, journal = {International Journal of Advance Engineering and Research Development}, issn = {2348-4470}, pages = {84 -- 86}, abstract = {Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents.}, subject = {Floor cleaning}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Bioprocess Development for Sustainable poly-β-hydroxybutyrate Production}, subject = {Bioplastics}, language = {en} } @article{MarklGruenbichlerLackner, author = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian}, title = {PHB - Bio Based and Biodegradable Replacement for PP: A Review}, series = {Novel Techniques in Nutrition and Food Science}, volume = {2}, journal = {Novel Techniques in Nutrition and Food Science}, number = {2}, pages = {4}, subject = {Bio Degradable}, language = {en} } @book{deVriesMarklLackner, author = {de Vries, Sytse and Markl, Erich and Lackner, Maximilian}, title = {Energy efficiency management in the shipping industry}, publisher = {Lambert Academic Publishing}, isbn = {978 3 659 71981 3}, publisher = {Fachhochschule Technikum Wien}, subject = {Transportation}, language = {en} } @inproceedings{GruenbichlerEngelhardtNowitzkiMarkletal., author = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert}, title = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios}, series = {th International Conference on Smart Materials and Structures}, booktitle = {th International Conference on Smart Materials and Structures}, publisher = {Material Sci Eng 2018 (7)}, subject = {Robotics}, language = {en} } @misc{GruenbichlerEngelhardtNowitzkiMarkletal., author = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert}, title = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios}, subject = {Robotics}, language = {en} } @inproceedings{LacknerZanglLembacheretal., author = {Lackner, Maximilian and Zangl, Sabine and Lembacher, Harald and R{\"u}ttinger, Norbert and Fochler, Claus}, title = {Non-wovens and recycling - An overview, International Conference on Recycling and Waste Water Management}, series = {International Conference on Recycling and Waste Water Management}, booktitle = {International Conference on Recycling and Waste Water Management}, subject = {Environment}, language = {en} } @article{SchneiderBartlmaeLeiboldetal., author = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}ffmann, Petra and Tabakovic, Momir and Zelger, Thomas}, title = {New assessment method for buildings and districts towards "Net Zero Energy Buildings" compatible with the energy scenario 2050}, series = {Corp}, journal = {Corp}, pages = {10}, subject = {Energy Technologies}, language = {en} } @inproceedings{TabakovicSchneiderLeiboldetal., author = {Tabakovic, Momir and Schneider, Simon and Leibold, Jens and Zelger, Thomas and Bartlm{\"a}, Nadja and Holzer, Peter and Sch{\"o}ffmann, Petra}, title = {Way to positive energy districts in Vienna}, series = {Mission Innovation Austria}, booktitle = {Mission Innovation Austria}, subject = {Energy Technologies}, language = {en} } @incollection{Tabakovic, author = {Tabakovic, Momir}, title = {Development and Implementation of BIPV Courseware for Higher Education and Professionals}, series = {Smart Education and e-Learning}, booktitle = {Smart Education and e-Learning}, publisher = {Springer}, publisher = {Fachhochschule Technikum Wien}, subject = {Education}, language = {en} } @inproceedings{RauhOrsolits, author = {Rauh, Sebastian and Orsolits, Horst}, title = {Perspectives on Virtual Reality in Higher Education for Robotics and Related Engineering Disciplines}, series = {Robotics in Education (International Conference on Robotics in Education)}, booktitle = {Robotics in Education (International Conference on Robotics in Education)}, publisher = {Springer}, isbn = {978-3-031-12848-6}, pages = {39 -- 51}, abstract = {Industrial engineering education has a strong focus on and affinity towards technology. While Virtual Reality hardware and applications advance and learning behaviour changes, it is particularly interesting to determine the possible use of Virtual Reality for teaching engineering subjects, for example fundamentals of robotics. This paper presents a study which examines the possible use of Virtual Reality learning environments at higher learning institutions. The study shows perspectives of students and lecturers and identifies opportunities and challenges for the use of Virtual Reality in industrial engineering education. The results of the indicated study show that the participants have a positive attitude towards Virtual Reality and strong motivation for in class use. The study results also suggest, that Virtual Reality content creation should be included in engineering curricula.}, subject = {Virtual reality}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves}, subject = {Generator}, language = {en} } @book{Tabakovic, author = {Tabakovic, Momir}, title = {Analyze and optimize the prototype of a thermoelectric generator: as an electrical renewable power source for biomass stoves}, publisher = {AV Akademikerverlag}, publisher = {Fachhochschule Technikum Wien}, subject = {Biomass}, language = {en} } @misc{MarklOrsolitsStojicic, author = {Markl, Erich and Orsolits, Horst and Stojicic, Dario}, title = {Virtuelle Technologien in der Robotik}, subject = {Robotics}, language = {de} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Way2Smart Korneuburg: Smart Cities Projekt}, subject = {Smart City}, language = {de} } @phdthesis{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversion of waste heat into electric energy by thermoelectric generators}, school = {Fachhochschule Technikum Wien}, abstract = {The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber.}, subject = {Energy Technologies}, language = {en} } @misc{LacknerKamravamaneshMarkletal., author = {Lackner, Maximilian and Kamravamanesh, Donya and Markl, Erich and Engelhardt-Nowitzki, Corinna and Herwig, Christoph}, title = {Optimization of process parameters to enhance Polyhydroxyalkanoate accumulation in a unicellular cyanobacterium using multivariate experimental design approach}, subject = {Bacteria}, language = {en} } @misc{OrsolitsGallasch, author = {Orsolits, Horst and Gallasch, Andreas}, title = {Make a 25 Year old Claw Crane Digital with Thingworx}, subject = {Crane}, language = {en} } @misc{Orsolits, author = {Orsolits, Horst}, title = {Using AR to Build a Digital Twin Robotics Laboratory}, organization = {PTC Academic Session}, subject = {Augmented Reality}, language = {en} } @inproceedings{ChiritaTabakovic, author = {Chirita, Cristian and Tabakovic, Momir}, title = {Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber}, series = {X International Conference Industrial Engineering and Environmental Protection}, booktitle = {X International Conference Industrial Engineering and Environmental Protection}, pages = {143 -- 151}, subject = {Generators}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714}, subject = {Bacteria}, language = {en} } @book{Lackner, author = {Lackner, Maximilian}, title = {Digital Conversion on the Way to Industry 4.0, Selected Papers from ISPR 2020}, publisher = {Springer E-Book}, publisher = {Fachhochschule Technikum Wien}, subject = {Engineering}, language = {en} } @techreport{OrsolitsKorn, author = {Orsolits, Horst and Korn, Alexander}, title = {Augmented Reality basierte Robotik-Lehre}, organization = {Gesellschaft f{\"u}r Informatik e.V., Wettbewerbsband AVRiL 2021}, pages = {8}, abstract = {Diese Arbeit beschreibt eine Augmented Reality (AR) Applikation f{\"u}r den Einsatz in der Hochschullehre zum Thema Industrierobotik. Ziel ist es, sowohl das Lehren als auch das Lernen grundlegender Robotik-Inhalte durch die Bereitstellung einer interaktiven Methode zur Vermittlung der Lehrinhalte f{\"u}r Studierende zu verbessern. Die Studierenden sind in der Lage, direkt mit dem virtuellen Modell eines Industrieroboters zu interagieren und so selbstgesteuert die Lerninhalte zu vertiefen. Diese interaktive Methode verbindet die Studierenden direkt mit den Lehrinhalten und f{\"o}rdert das selbsterforschende Lernen. Eine weitere Anwendungsm{\"o}glichkeit sieht die Kombination einer Lektorenversion der AR Experience mit der Studierendenversion vor. Der Lektor hat die M{\"o}glichkeit, das Modell in AR zu steuern bzw. zu ver{\"a}ndern und die Studierenden k{\"o}nnen auf Ihren Mobilger{\"a}ten die {\"A}nderungen live in AR mitverfolgen, um so auch im Distance Learning eine Verbindung Lektor - Studierende - Inhalt zus{\"a}tzlich zu Videokonferenz-Tools herzustellen.}, subject = {Augmented Reality}, language = {de} } @misc{TabakovicHemis, author = {Tabakovic, Momir and Hemis, Herbert}, title = {Energieversorgungsl{\"o}sungen auf Quartiersebene}, subject = {Energy Systems}, language = {de} } @article{WagnerLackner, author = {Wagner, Isabella and Lackner, Maximilian}, title = {Extraction and Analysis of Natural Rubber from the Latex of Ficus carica, Artocarpus heterophyllus and Polymer Analysis of Durio zibethinus}, series = {Austin Journal of Biotechnology \& Bioengineering}, journal = {Austin Journal of Biotechnology \& Bioengineering}, number = {Vol. 8 (2)}, abstract = {In tropical fruits such as durian (Durio zibethinus) and jackfruit (Artocarpus heterophyllus), only one quarter to one third of the fruit is edible. Finding more ways to industrially use the other components of the fruit can reduce the waste burned or dumped in landfills. Another fruit tree of interest that can also grow in Austria is the fig tree (Ficus carica). Currently, the fruits are the main product of that plant; however, components in the latex of the tree are of interest too. The latex is known to contain natural rubber, which could potentially be used for industrial applications. Jackfruit trees also produce latex, which contains natural rubber. In both cases, the natural rubber has different properties compared to the conventionally used rubber from the rubber tree (Hevea brasiliensis). This could provide new opportunities in various applications. Therefore, the purpose of this research is to analyze the properties of the natural rubber obtained from the jackfruit and fig trees. Additionally, durian fruit also produces a sticky liquid, so the same experiments were also carried out with durian samples. The experimental procedure included extraction with acetone and cyclohexane as well as polymer length determination with gel permeation chromatography and polymer analysis with differential scanning calorimetry. The results show that in both jackfruit and fig tree latex, there is natural rubber of similar polymer length. Durian pulp also contains a polymer; however, with these experiments, it could not be identified. Further research is required to identify the durian polymer and to confirm the results of this experiment.}, subject = {Extraction}, language = {en} } @article{PetrovNeussnerLackner, author = {Petrov, Timothy and Neussner, Wolfgang and Lackner, Maximilian}, title = {Digitalization of the Process Landscape for Proprietary Bond Trading}, series = {Sustainable Future and Technology Development}, journal = {Sustainable Future and Technology Development}, number = {Vol 3, No 6, 2021}, abstract = {On the surface, the process landscape for fixed income securities trading within most banks has changed only slightly in the past four decades. The value chain remains divided amongst front-, middle-, and back office, with IT in support. Front office negotiates deals with customers and other banks, middle office manages risks and reporting, and back office ensures that payments are made in exchange for a transfer of the bonds that have been traded. Though these processes have gradually migrated to electronic mediums, much of the work in all functional areas remains manual. But the advent of digital technologies, primarily process automation software and data integration in an open software architecture, allows banks to dramatically change how the processes along the value chain are carried out. Repetitive and predictable tasks can be performed by automated software, allowing humans to concentrate on complex activities that require flexibility and discretion. Those tasks that remain in the hands of humans can also be made more efficient by extracting data from software applications along the entire process chain and providing them to the human user at the right point in time in the right system.}, subject = {Digitalization}, language = {en} } @inproceedings{KlamertSchmidTraxlerLackner, author = {Klamert-Schmid, Judith and Traxler, Sabine and Lackner, Maximilian}, title = {The Phenomenon Of 'Opportunity Recognition' Among Engineering Student}, series = {24th International Conference on Interactive Collaborative Learning(ICL2021), 22.-24.September 2021, Dresden}, booktitle = {24th International Conference on Interactive Collaborative Learning(ICL2021), 22.-24.September 2021, Dresden}, address = {Dresden}, subject = {Engineering}, language = {en} } @inproceedings{LacknerNovotnyZangletal., author = {Lackner, Maximilian and Novotny, Florian A. and Zangl, Sabine and Lembacher, Harald}, title = {Contribution of waste heat to the anthropogenic greenhouse effect}, series = {2nd International Conference on Environmental Sustainability and Climate Change"}, booktitle = {2nd International Conference on Environmental Sustainability and Climate Change"}, subject = {Sustainability}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Analysis and Optimization of a Thermoelectric Generator as an Electrical Renewable Power Source for Biomass Boilers}, subject = {Generator}, language = {en} } @article{MarklLacknerSchmidetal., author = {Markl, Erich and Lackner, Maximilian and Schmid, Judith and Faast, Thomas}, title = {Mutual Benefits from Entrepreneurship of Non-business University Graduates for Academia and Founders}, series = {International Academic Journal of Entrepreneurship}, journal = {International Academic Journal of Entrepreneurship}, pages = {8}, abstract = {There is a trend among universities to teach entrepreneurship and support startup initiatives. In this article, the state-ofthe- art in entrepreneurship higher education and university ecosystems of non-business schools is reviewed, and the example of the University of Applied Sciences Technikum Wien, Austria, and one of its startup show cases, Toolsense, is elaborated to understand critical success factors for non-business graduates as founders. The mutual benefits for universities and founders are discussed. In the case of Toolsense and the University of Applied Sciences, narrow band IoT as brought to the University by the startup. Implications on a universities' innovation and portfolio management are highlighted. Concerning startups, the importance of growth financing after initial success is elaborated.}, subject = {Entrepreneurship}, language = {en} } @inproceedings{WoeberNovotnyAburaiaetal., author = {W{\"o}ber, Wilfried and Novotny, Georg and Aburaia, Mohamed and Otrebski, Richard and Kubinger, Wilfried}, title = {Estimating a Sparse Representation of Gaussian Processes Using Global Optimization and the Bayesian Information Criterion}, series = {Austrian Robotics Workshop 2018}, booktitle = {Austrian Robotics Workshop 2018}, subject = {Mobile Robotics}, language = {en} } @inproceedings{DannerederEngelhardtNowitzkiMarkletal., author = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane}, title = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control}, series = {Proceedings of the Austrian Robotics Workshop 2018}, booktitle = {Proceedings of the Austrian Robotics Workshop 2018}, subject = {Robotics}, language = {en} } @inproceedings{TabakovicBoecklBergeretal., author = {Tabakovic, Momir and B{\"o}ckl, Benjamin and Berger, Michael A. and Hermis, Herbert and Nauschegg, Daniel and Wall, Johannes}, title = {Energieversorgungsl{\"o}sungen auf Quartiersebene}, series = {World Energy Council Austria Young Energy Professionals}, booktitle = {World Energy Council Austria Young Energy Professionals}, subject = {Energy Systems}, language = {en} } @book{OrsolitsLackner, author = {Orsolits, Horst and Lackner, Maximilian}, title = {Virtual Reality und Augmented Reality in der Digitalen Produktion}, editor = {Lackner, Maximilian and Orsolits, Horst}, publisher = {Springer Gabler}, isbn = {978-3-658-29009-2}, publisher = {Fachhochschule Technikum Wien}, subject = {Virtual Reality}, language = {de} } @inproceedings{GonzalezGutierrezTreitlerSpoerketal., author = {Gonzalez-Gutierrez, Joamin and Treitler, Manuel and Spoerk, Martin and Arbeiter, Florian and Schuschnigg, Stephan and Lammer, Herfried and Lackner, Maximilian and Aburaia, Mohamed and Poszvek, G{\"u}nther and Zhang, Haiguang and Sapkota, Janak and Holzer, Clemes}, title = {Carbon fiber reinforced thermoplastics for material extrusion additive manufacturing}, series = {Conference proceedings of 35th International Conference of the Polymer Processing Society}, booktitle = {Conference proceedings of 35th International Conference of the Polymer Processing Society}, pages = {5}, abstract = {In an effort to broaden the engineering applications of material extrusion based additive manufacturing (MEAM), new materials are being developed. Adding carbon-fibers (CF) has been one strategy to increase the mechanical performance of different thermoplastics. One challenge is to determine the amount of CF needed to increase the mechanical performance without affecting the "printability" of the compounds. In this paper, different amounts (10, 15, and 20 vol.\%) of CF were added to recycled polypropylene (rPP) and polyamide 12 (PA12). A compatibilizer was used for rPP, but not for PA12. Filaments for MEAM were extruded from the different compounds and the viscosity as well as the tensile properties were measured and compared to the processed polymeric matrices. It was observed that the viscosities at the angular frequencies relevant for MEAM (100 to 200 rad/s) were not significantly different for rPP+CF compounds, but it was higher for PA12+CF compounds. As expected, the elongation at break significantly decreased with the addition of CF for all compounds. For the composites with an rPP matrix, the Young's modulus and the ultimate tensile strength (UTS) continuously increased as the CF content increased to 20 vol.\%. For PA12-based materials, the Young's modulus and the UTS increased with CF content, but adding more than 15 vol.\% did not further improve these values. Therefore, it was concluded that for PA12 the maximum amount of CF that should be added was 15 vol.\%. Using scanning electron microscopy, it was observed that the CF were homogeneously dispersed in the rPP matrix, but not so well in the PA12 matrix, with fibers being more concentrated towards the rim of the filament. Finally, filaments of rPP, rPP+20CF, PA12 and PA12+15CF were used to print complex geometries by means of MEAM, and it was observed that CF helped to reduce the warpage compared to the unfilled filaments. A potential application of this phenomenon could be the reduction of the bed temperature to develop a more energy efficient MEAM process for semi-crystalline polymers.}, subject = {Additive Manufacturing}, language = {en} } @article{KlamertSchmidLackner, author = {Klamert-Schmid, Judith and Lackner, Maximilian}, title = {Arbeiten und studieren im Homeoffice}, series = {Alle! Achtung! Das Sicherheitsmagazin der AUVA}, journal = {Alle! Achtung! Das Sicherheitsmagazin der AUVA}, number = {10/2021}, subject = {Home Office}, language = {de} } @incollection{LacknerMarklCermak, author = {Lackner, Maximilian and Markl, Erich and Cermak, Corinna}, title = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail}, series = {Transportation Systems Analysis and Assessment}, booktitle = {Transportation Systems Analysis and Assessment}, publisher = {Fachhochschule Technikum Wien}, abstract = {This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed.}, subject = {Energy}, language = {en} } @incollection{CermakMarklLackner, author = {Cermak, Corinna and Markl, Erich and Lackner, Maximilian}, title = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail}, series = {Transportation}, booktitle = {Transportation}, publisher = {Intech Open}, publisher = {Fachhochschule Technikum Wien}, subject = {Transportation}, language = {en} } @article{ZanglHuseticLackneretal., author = {Zangl, Sabine and Husetic, Mirza and Lackner, Maximilian and Lembacher, Harald}, title = {Sustainability - bringing about a value changes amongst employees}, series = {Techniumscience}, journal = {Techniumscience}, subject = {Sustainability}, language = {en} } @inproceedings{RauerWoeberAburaia, author = {Rauer, Johannes and W{\"o}ber, Wilfried and Aburaia, Mohamed}, title = {An Autonomous Mobile Handling Robot Using Object Recognition}, series = {Proceedings of ARW \& OAGM Workshop 2019}, booktitle = {Proceedings of ARW \& OAGM Workshop 2019}, subject = {Mobile Robotics}, language = {en} } @inproceedings{TabakovicFechner, author = {Tabakovic, Momir and Fechner, Hubert}, title = {Status and outlook for building integrated photovoltaics (BIPV) in relation to educational needs in the BIPV sector}, series = {Proceedings of the 8th International Conference on Sustainability in Energy and Buildings 2016}, booktitle = {Proceedings of the 8th International Conference on Sustainability in Energy and Buildings 2016}, subject = {Photovoltaics}, language = {en} } @misc{TabakovicFechner, author = {Tabakovic, Momir and Fechner, Hubert}, title = {Status and outlook for building integrated photovoltaics (BIPV) in relation to educational needs in the BIPV sector}, subject = {Photovoltaics}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Strom im Wohnbau - Die Zukunft hat begonnen}, subject = {Buildings}, language = {de} } @inproceedings{WoeberAburaiaAburaiaetal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich}, title = {Digital Manufacturing \& Robotics im Department Industrial Engineering}, series = {Konferenz der Mechatronik Plattform Autonome mechatronische Systeme}, booktitle = {Konferenz der Mechatronik Plattform Autonome mechatronische Systeme}, pages = {20 -- 21}, abstract = {Digitalisierung und Automatisierung in produzierender Industrie sind Schlagw{\"o}rter heutiger Forschungsbarbeiten am Department Industrial Engineering der Fachhochschule Technikum Wien. K{\"u}nstliche Intelligenz, vernetzte Sensorsysteme oder {\"u}bergreifende Prozessplanung erm{\"o}glichen Optimierung hinsichtlich Produktionszeit oder Fertigung von individualisierten Produkten, was zur Losgr{\"o}ße 1 f{\"u}hrt. In diesem Dokument werden Forschungst{\"a}tigkeiten des Departments Industrial Engineering im Kontext Vernetzung, Servicerobotik sowie Industrierobotik zusammengefasst.}, subject = {Industrial Engineering}, language = {de} } @misc{WoeberAburaiaKubingeretal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich and Aburaia, Mohamed}, title = {Digital Manufacturing \& Robotics im Department Industrial Engineering}, subject = {Industrial Engineering}, language = {de} } @inproceedings{AburaiaLacknerGruenbichleretal., author = {Aburaia, Mohamed and Lackner, Maximilian and Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lammer, H. and Zhang, Haiguang and Wang, J. and Sapotka, J. and Janics, T. and Hailberger, M.}, title = {Freeform-FDM process development using natural fibre reinforced biopolymers}, series = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK}, booktitle = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK}, subject = {Freeform Printing}, language = {en} } @inproceedings{DannerederPachschwoellAburaiaetal., author = {Dannereder, Florian and Pachschw{\"o}ll, Paul and Aburaia, Mohamed and Markl, Erich and Lackner, Maximilian and Engelhardt-Nowitzki, Corinna and Shooman, Diane}, title = {Development of a 3D-printed Bionic Hand with Muscle- and Force Control}, series = {Austrian Robotics Workshop 2018}, booktitle = {Austrian Robotics Workshop 2018}, subject = {Robotics}, language = {en} } @inproceedings{SchneiderZelgerTabakovic, author = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir}, title = {Combining bottom-up and top-down approaches to converge heterogeneous building data into a homogenous, interactive and expandable energy autonomy platform}, series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, subject = {Energy Autonomy}, language = {en} } @inproceedings{TabakovicvanSarkLouwenetal., author = {Tabakovic, Momir and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Arancon, Sofia and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza}, title = {Development of BIPV courseware for students and professionals}, series = {Proceeding: Austrian PV Conference}, booktitle = {Proceeding: Austrian PV Conference}, subject = {Course Material}, language = {en} } @inproceedings{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversation of waste heat from solid-fuel stove into electric energy using a high temperature thermoelectric generator compared to Bi2Te3 thermoelectric generator}, series = {Proceeding: ISEC 2018}, booktitle = {Proceeding: ISEC 2018}, subject = {Energy Conversion}, language = {en} } @techreport{TabakovicFechnerLeonhartsberger, author = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt}, title = {National Survey Report of PV Power Applications in Austria 2017}, series = {IEA- International Energy Agency}, journal = {IEA- International Energy Agency}, subject = {Photovoltaics}, language = {en} } @misc{KamravamaneshPflueglLackneretal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph}, title = {Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714}, subject = {Bacteria}, language = {en} } @book{LacknerGrabowStadler, author = {Lackner, Maximilian and Grabow, Wilhelm and Stadler, Philipp}, title = {Handbook of Online and Near-real-time Methods in Microbiology}, publisher = {Fachhochschule Technikum Wien}, subject = {Microbiology}, language = {en} } @article{AaliyaSunoojSriRajkumaretal., author = {Aaliya, Basheer and Sunooj, Kappat Valiyapeediyekkal and Sri Rajkumar, Chillapalli Babu and Navaf, Muhammed and Akhila, Plachikkattu Parambil and Sudheesh, Cherakkathodi and George, Johnsy and Lackner, Maximilian}, title = {Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments}, series = {Polymers}, volume = {13}, journal = {Polymers}, number = {3855}, abstract = {Talipot starch, a non-conventional starch source with a high yield (76\%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P-O-C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4\%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08\%.}, subject = {Talipot starch}, language = {en} } @article{HaasMarklLackner, author = {Haas, Theodor and Markl, Erich and Lackner, Maximilian}, title = {Innovative use of waste tyres: Noise-barriers and geoengineering}, series = {World Journal of Advanced Engineering Technology and Sciences}, journal = {World Journal of Advanced Engineering Technology and Sciences}, subject = {Engineering}, language = {en} } @misc{Lackner, author = {Lackner, Maximilian}, title = {PBAT - A versatile bioplastics}, subject = {Bioplastics}, language = {en} } @incollection{TabakovicOttoCommerelletal., author = {Tabakovic, Momir and Otto, Marc-Oliver and Commerell, Walter and Csapo, Csilla and Vermaak, Herman}, title = {Increase industry cooperation in post graduate education via OpenLab's and MobileLab's in South Africa}, series = {Smart Education and e-Learning 2020}, booktitle = {Smart Education and e-Learning 2020}, publisher = {Springer Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {623 -- 629}, abstract = {This paper will present the concepts of the EURYDICE project funded by the Erasmus + program. Within this project the focus on renewable energies with the overall goal to enhance employability. The energy generation landscape in South Africa is undergoing a fundamental transition, as the vision of the energy strategy is to contribute to an affordable energy for all. This vision will be supported by innovative labs and portals which will be developed within this project. One of the goals is closing the gap between TVET (Technical and Vocational Education and Training Colleges) studies and diploma study by the definition of industrial experience requirements for University of Technology (UoT) diploma students. This leads to an increased preparedness and "studyability" of UoT diploma students. Industrial stakeholders will be integrated into the process. The project will develop an "Industrial Portal" as a working tool. To increase industry cooperation in post graduate education "OpenLabs" and "MobileLabs" will be developed within the project. It is intended that industry brings industrial problems into the "Labs", which will then be solved by the students.}, subject = {Mobile Labs}, language = {en} } @inproceedings{TabakovicWuerflGuerraetal., author = {Tabakovic, Momir and W{\"u}rfl, Marlen and Guerra, Eduardo and Gutleder, Miriam}, title = {Operating models for PV systems in existing residential building complexes in Vienna - challenges and opportunities}, series = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, booktitle = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, abstract = {This paper aims to identify challenges and opportunities that are associated with installing PV (Photovoltaic) systems in existing residential building complexes in Vienna. For this purpose, a project-oriented approach was chosen and hence a representative residential building complex in Vienna was chosen and analyzed to demonstrate the challenges that are associated with such projects. Furthermore, a particular focus lies on exploring different operating models that are available when it comes to the execution of such a project. As this paper builds on the rather novel topic of exploring new operating models for installing PV systems on existing residential building complexes in Vienna, many further suggestions for research can be identified that exceed the scope of this paper.}, subject = {Photovoltaics}, language = {en} } @article{LacknerOuattaraGharaeetal., author = {Lackner, Maximilian and Ouattara, Ibrahim and Gharae, Norouz Ali and Abolhassani, Raymond}, title = {Clean drinking water global scarcity: a review}, series = {Journal of Water Science and Engineering}, journal = {Journal of Water Science and Engineering}, subject = {Water}, language = {en} } @inproceedings{Lackner, author = {Lackner, Maximilian}, title = {Combination of Devulcanization and Reactive Extrusion for Value-Added Rubber Recycling}, series = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, subject = {Recycling}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {International Weeks als Plattformen f{\"u}r l{\"a}nder{\"u}bergreifende Zusammenarbeit}, subject = {Internationalisation}, language = {de} } @article{ZanglPingitzerLembacheretal., author = {Zangl, Sabine and Pingitzer, D. and Lembacher, Harald and Lackner, Maximilian}, title = {Carbon footprint reduction in households using professional services - example of laundry cleaning}, series = {Pubtexto}, journal = {Pubtexto}, subject = {Sustainability}, language = {en} } @book{OrsolitsLackner, author = {Orsolits, Horst and Lackner, Maximilian}, title = {Virtual Reality und Augmented Reality in der Digitalen Produktion}, publisher = {Gabler}, isbn = {978-3-658-29008-5}, publisher = {Fachhochschule Technikum Wien}, subject = {Virtual Reality}, language = {de} } @book{Lackner, author = {Lackner, Maximilian}, title = {Chemical Engineering Vocabulary: Bilingual}, publisher = {Fachhochschule Technikum Wien}, subject = {Chemical Engineering}, language = {en} } @inproceedings{TabakovicSchneiderLaurentetal., author = {Tabakovic, Momir and Schneider, Simon and Laurent, Pierre and Zelger, Thomas and Kerschbaum, Elisabeth and Figl, Hildegund}, title = {Korneuburgs way2smart - mobility concept, energy platform and social interaction}, series = {Proceedings of the 22nd International Conference on Urban Planning, Regional Development and Information Society (REAL CORP 2017 - PANTA RHEI)}, booktitle = {Proceedings of the 22nd International Conference on Urban Planning, Regional Development and Information Society (REAL CORP 2017 - PANTA RHEI)}, subject = {Energy Market}, language = {en} } @article{SpitzerSonnleitnerKempeLackner, author = {Spitzer-Sonnleitner, Birgit and Kempe, Andre and Lackner, Maximilian}, title = {Influence of halide solutions on collagen networks - measurements of physical properties by atomic force microscopy (AFM)}, series = {Influence of halide solutions on collagen networks}, journal = {Influence of halide solutions on collagen networks}, subject = {Collagen Networks}, language = {en} } @inproceedings{BululukovaWahl, author = {Bululukova, Darya and Wahl, Harald}, title = {Towards a Sustainable Smart Cities Integration in Teaching and Research}, series = {Proceedings of the 4th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS, 101-106, 2015, Lisbon, Portugal}, booktitle = {Proceedings of the 4th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS, 101-106, 2015, Lisbon, Portugal}, subject = {Smart City}, language = {en} } @inproceedings{TabakovicBululukovaWahl, author = {Tabakovic, Momir and Bululukova, Darya and Wahl, Harald}, title = {Smart Cities Education as Mobility, Energy \& ICT Hub}, series = {Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS) 2016}, booktitle = {Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS) 2016}, subject = {Smart City}, language = {de} } @article{GraselBaptistaTragner, author = {Grasel, Bernhard and Baptista, Jos{\´e} and Tragner, Manfred}, title = {Supraharmonic and Harmonic Emissions of a Bi-Directional V2G Electric Vehicle Charging Station and Their Impact to the Grid Impedance}, series = {Energies}, volume = {15}, journal = {Energies}, number = {8}, doi = {10.3390/en15082920}, abstract = {Bidirectional electric vehicle supply equipment and charging stations (EVSE) offer new business models and can provide services to the electrical grid. The smart grid lab in Vienna gives unique testing possibilities of future smart grids, as different type of electrical equipment can be operated at a reconstructed, well-known distribution grid. In this work the harmonic and supraharmonic emissions of a bidirectional EVSE are measured according to IEC61000-4-7 and IEC61000-4-30 Ed3 standard as well as the high-frequency grid impedance. In addition, the efficiency and the power factor are determined at various operating points. Although THDi at nominal power (10 kW) is very low and the efficiency and power factor is very high, at low power levels the opposite situation arise. Supraharmonic emissions remain stable independent of the charging/discharging power, and both wideband and narrowband emissions occur. The additional capacitance when connecting the EVSE impacts the high-frequency grid impedance substantially and generates resonance points.}, subject = {power quality}, language = {en} } @misc{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Peharz, Gerhard and Rechberger, P. and Aichinger, Martin and Moor, D.}, title = {Ringversuch von baugleichen Glas-Glas-BIPV-Elementen unter verschiedenen Klimabedingungen - ein Beitrag {\"O}sterreichs zu IEA PVPS Task 15: „Beschleunigung der Marktdurchdringung von BIPV"}, subject = {Photovoltaics}, language = {de} } @inproceedings{LeonhartsbergerMeiselPicleretal., author = {Leonhartsberger, Kurt and Meisel, M. and Picler, M. and Schidler, Susanne and Fotiadis, Lampros and Xypolytou, E. and Werner, Andrea}, title = {System relevant Applications for Battery Storage Systems}, series = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, booktitle = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, subject = {Battery Storage Systems}, language = {en} } @techreport{BiermayrDissauerEberletal., author = {Biermayr, Peter and Dißauer, Christa and Eberl, Manuela and Enigl, Monika and Fechner, Hubert and Fischer, L. and Leonhartsberger, Kurt and Maringer, F. and Moidl, S. and Schmidl, C. and Strasser, C. and Weiss, W. and Wonisch, P. and Wopienka, E.}, title = {Innovative Energietechnologien in {\"O}sterreich - Marktentwicklung 2018}, series = {BMVIT Schriftenreihe 04/2018}, journal = {BMVIT Schriftenreihe 04/2018}, subject = {Energy Technology}, language = {de} } @inproceedings{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Rechberger, P. and Moor, D. and Aichinger, Martin}, title = {Comparative Performance Measurements of Identical BIPV-Elements in Different Climatic Environments - A Round Robin Action within the IEA PVPS Task 15 Collaboration}, series = {35th European Photovoltaic Solar Energy Conference and Exhibition}, booktitle = {35th European Photovoltaic Solar Energy Conference and Exhibition}, isbn = {3-936338-50-7}, subject = {Photovoltaics}, language = {en} } @article{ZhangYaoMaetal., author = {Zhang, Hang and Yao, Yuan and Ma, Yingxin and Lackner, Maximilian and Jiang, Yunliang}, title = {A 3D printing tool-path generation strategy based on the partition of principal stress field for fused filament fabrication}, series = {The International Journal of Advanced Manufacturing Technology}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {122}, pages = {1719 -- 1735}, abstract = {In order to enhance the strength of 3D-printed parts made of polymer materials and reduce the anisotropy caused by the fused filament fabrication process, this paper proposes an inter-layer interleaved composite path planning method based on the directional partition of the principal stress field. This method not only ensures intra-layer reinforcement under specific working conditions but also increases the strength of the printed part by enhancing the adhesion of adjacent layers through staggered filling between layers. The mechanical performance is improved by 10 to 30\% compared to other conventional filling patterns such as the zigzag filling algorithm. Inter-layer interleaved composite enhancement path planning method is suitable for path planning of structures with complex shapes and is easily integrated into existing general computer-aided engineering processes.}, subject = {Principal stress field}, language = {en} } @article{WoeberCurtoTibihikaetal., author = {W{\"o}ber, Wilfried and Curto, Manuel and Tibihika, Papius D. and Meulenboek, Paul and Alemayehu, Esayas and Mehnen, Lars and Meimberg, Harald and Sykacek, Peter}, title = {Identifying geographically differentiated features of Ethopian Nile tilapia (Oreochromis niloticus) morphology with machine learning}, series = {PlosONE}, volume = {16}, journal = {PlosONE}, number = {4}, subject = {Machine Learning}, language = {en} } @inproceedings{WoeberTibihikaOlaverriMonrealetal., author = {W{\"o}ber, Wilfried and Tibihika, Papius D and Olaverri-Monreal, Cristina and Mehnen, Lars and Sykacek, Peter and Meimberg, Harald}, title = {Comparison of Unsupervised Learning Methods for Natural Image Processing}, series = {Biodiversity Information Science and Standards}, booktitle = {Biodiversity Information Science and Standards}, number = {3}, subject = {Machine Learning}, language = {en} } @inproceedings{WoeberSzuegyiKubingeretal., author = {W{\"o}ber, Wilfried and Szuegyi, Daniel and Kubinger, Wilfried and Mehnen, Lars}, title = {A principal component analysis based object detection for thermal infra-red images}, series = {Proceedings of the 55th International Symposium ELMAR}, booktitle = {Proceedings of the 55th International Symposium ELMAR}, subject = {Principal Component Analysis}, language = {en} } @misc{SpulakOtrebskiKubinger, author = {Spulak, David and Otrebski, Richard and Kubinger, Wilfried}, title = {Object Tracking by Combining Supervised and Adaptive Online Learning through Sensor Fusion of Multiple Stereo Camera Systems}, subject = {Object Tracking}, language = {en} } @article{TaghaviTaghizadehMehmannavazetal., author = {Taghavi, Marziyeh and Taghizadeh, Akbar and Mehmannavaz, Yousef and Hosseinkhani, Ali and Mohammadzadeh, Hamid and Macit, Muhlis and Palangi, Valiollah and Lackner, Maximilian}, title = {Degradability of Vicia ervilia Grain Using In Situ and CNCPS Methods, and Model-Based Analysis of Its Ruminal Degradation}, series = {Fermentation}, volume = {9}, journal = {Fermentation}, number = {5}, doi = {10.3390/fermentation9050419}, abstract = {Using nylon bag techniques, Cornell net carbohydrates and protein systems (CNCPS), and scanning electron microscopy, the authors examined the digestibility and structure of Vicia ervilia (ervil, bitter vetch) after steam flaking, roasting, and microwave processing. During the in situ technique, the samples were incubated at 0, 2, 4, 6, 8, 12, 16, 24, 36, and 48 h. For the description of the ruminal DM (dry matter) and CP (crude protein) degradation kinetics of treated and untreated Vicia ervilia, different models were selected as the best fit for the dry matter (DM) and crude protein (CP) degradation parameters of steam flaked samples. The results showed that both the steam flaking and microwave treatment samples contained high levels of non-protein nitrogen and buffer soluble protein, respectively. In comparison with steam flaking and microwave treatment, roasting decreased and increased the buffer soluble protein and neutral detergent insoluble protein, respectively. The control treatments showed the highest levels of neutral detergent soluble protein and the lowest levels of acid detergent soluble protein. Moreover, steam flaking and roasting decreased and increased the amount of acid detergent insoluble protein, respectively. When using dry heat (microwave and roasting), the acid detergent soluble and insoluble protein fractions were increased. As a result of this experiment, the nitrogen fractions were altered using heat processing. Hence, protein fermented feed and ruminal fermentation conditions can be expressed using these results.}, subject = {Vicia ervilia}, language = {en} } @article{AhmadzadehHosseinkhaniPalangietal., author = {Ahmadzadeh, Leila and Hosseinkhani, Ali and Palangi, Valiollah and Lackner, Maximilian}, title = {Supplementary Feed Additives Can Improve Lamb Performance in Terms of Birth Weight, Body Size, and Survival Rate}, series = {Animals}, journal = {Animals}, number = {13 / 6}, doi = {10.3390/ani13060993}, subject = {feed restriction}, language = {en} } @inproceedings{WoeberAburaiaOlaverriMonreal, author = {W{\"o}ber, Wilfried and Aburaia, Mohamed and Olaverri-Monreal, Cristina}, title = {Classification of Streetsigns Using Gaussian Process Latent Variable Models}, series = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria}, booktitle = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria}, subject = {Streetsigns}, language = {en} }