@inproceedings{SchneiderZelgerTabakovic,
  author    = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir},
  title     = {State of play and future of small-town urban buildings guided by an energy-autonomy vision statement: consumption, calculation and potential embedded in Smart City Demo Way2Smart},
  series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen},
  booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen},
  pages     = {62 -- 66},
  subject      = {Smart City},
  language  = {en}
}
@inproceedings{LacknerMarklAburaia,
  author    = {Lackner, Maximilian and Markl, Erich and Aburaia, Mohamed},
  title     = {Cybersecurity Management for (Industrial) Internet of Things: Challenges and Opportunities},
  series = {Journal of Information Technology \& Software Engineering Keywords},
  booktitle = {Journal of Information Technology \& Software Engineering Keywords},
  subject      = {Security},
  language  = {en}
}
@inproceedings{WoeberAburaiaAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich},
  title     = {Konferenz der Mechatronik-Plattform: Autonome mechatronische Systeme},
  series = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering},
  booktitle = {FH CAMPUS 02, 22. November 2018 Digital Manufacturing \& Robotics im Department Industrial Engineering},
  subject      = {Autonom},
  language  = {en}
}
@inproceedings{BucherAburaiaMarkletal.,
  author    = {Bucher, Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzalez-Gutierrez, Joamin and Lammer, Herfried},
  title     = {Poster Symposium on ADDitive Manufacturing and Innovative Technologies},
  series = {Symposium on ADDitive Manufacturing and Innovative Technologies},
  booktitle = {Symposium on ADDitive Manufacturing and Innovative Technologies},
  subject      = {Innovative Technologies},
  language  = {en}
}
@techreport{ZelgerFechnerSetznageletal.,
  author    = {Zelger, Thomas and Fechner, Hubert and Setznagel, R. and Tabakovic, Momir},
  title     = {THEBAVOL: Anwendungen und Grenzen der THErmischen BAuteilaktivierung im großVOLumigen Geschoßbau},
  subject      = {Building Parts},
  language  = {de}
}
@misc{SchneiderTabakovic,
  author    = {Schneider, Simon and Tabakovic, Momir},
  title     = {Aktueller Stand und Zukunft von stadteigenen Geb{\"a}uden einer Kleinstadt mit energieautonomen Leitbild: Verbrauch, Berechnung und Potential im Rahmen von Smart City Demo Way2Smart},
  subject      = {Smart City},
  language  = {de}
}
@misc{DannerederEngelhardtNowitzkiMarkletal.,
  author    = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane},
  title     = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control},
  subject      = {Robotics},
  language  = {en}
}
@inproceedings{WoeberAburaiaAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich},
  title     = {Digital Manufacturing \& Robotics im Department Industrial Engineering},
  series = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme},
  booktitle = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme},
  subject      = {Digital Manufacturing},
  language  = {de}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {Cyanobacteria for PHB Bioplastics Production: A Review},
  series = {IntechOpen},
  journal   = {IntechOpen},
  pages     = {10},
  abstract  = {Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78\% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature.},
  subject      = {Bio-based Plastics},
  language  = {en}
}
@article{KnappLacknerMarkl,
  author    = {Knapp, Alexander and Lackner, Maximilian and Markl, Erich},
  title     = {Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning},
  series = {International Journal of Advance Engineering and Research Development},
  journal   = {International Journal of Advance Engineering and Research Development},
  issn      = {2348-4470},
  pages     = {84 -- 86},
  abstract  = {Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents.},
  subject      = {Floor cleaning},
  language  = {en}
}
@misc{KamravamaneshPflueglLackneretal.,
  author    = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Lackner, Maximilian and Herwig, Christoph},
  title     = {Bioprocess Development for Sustainable poly-β-hydroxybutyrate Production},
  subject      = {Bioplastics},
  language  = {en}
}
@article{MarklGruenbichlerLackner,
  author    = {Markl, Erich and Gr{\"u}nbichler, Hannes and Lackner, Maximilian},
  title     = {PHB - Bio Based and Biodegradable Replacement for PP: A Review},
  series = {Novel Techniques in Nutrition and Food Science},
  volume    = {2},
  journal   = {Novel Techniques in Nutrition and Food Science},
  number    = {2},
  pages     = {4},
  subject      = {Bio Degradable},
  language  = {en}
}
@book{deVriesMarklLackner,
  author    = {de Vries, Sytse and Markl, Erich and Lackner, Maximilian},
  title     = {Energy efficiency management in the shipping industry},
  publisher = {Lambert Academic Publishing},
  isbn      = {978 3 659 71981 3},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Transportation},
  language  = {en}
}
@inproceedings{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  series = {th International Conference on Smart Materials and Structures},
  booktitle = {th International Conference on Smart Materials and Structures},
  publisher = {Material Sci Eng 2018 (7)},
  subject      = {Robotics},
  language  = {en}
}
@misc{GruenbichlerEngelhardtNowitzkiMarkletal.,
  author    = {Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Bermejo Moratinos, Ra{\´u}l and Supancic, Peter and Danzer, Robert},
  title     = {Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios},
  subject      = {Robotics},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves},
  subject      = {Generator},
  language  = {en}
}
@misc{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Way2Smart Korneuburg: Smart Cities Projekt},
  subject      = {Smart City},
  language  = {de}
}
@phdthesis{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Direct conversion of waste heat into electric energy by thermoelectric generators},
  school      = {Fachhochschule Technikum Wien},
  abstract  = {The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber.},
  subject      = {Energy Technologies},
  language  = {en}
}
@inproceedings{WoeberNovotnyAburaiaetal.,
  author    = {W{\"o}ber, Wilfried and Novotny, Georg and Aburaia, Mohamed and Otrebski, Richard and Kubinger, Wilfried},
  title     = {Estimating a Sparse Representation of Gaussian Processes Using Global Optimization and the Bayesian Information Criterion},
  series = {Austrian Robotics Workshop 2018},
  booktitle = {Austrian Robotics Workshop 2018},
  subject      = {Mobile Robotics},
  language  = {en}
}
@inproceedings{DannerederEngelhardtNowitzkiMarkletal.,
  author    = {Dannereder, Florian and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lackner, Maximilian and Kreith, Josef and Pachschw{\"o}ll, Paul Herwig and Aburaia, Mohamed and Shooman, Diane},
  title     = {Development of a 3D-Printed Bionic Hand with Muscle- and Force Control},
  series = {Proceedings of the Austrian Robotics Workshop 2018},
  booktitle = {Proceedings of the Austrian Robotics Workshop 2018},
  subject      = {Robotics},
  language  = {en}
}