@incollection{PeppoloniHirschlLeonhartsberger, author = {Peppoloni, Mauro and Hirschl, Alexander and Leonhartsberger, Kurt}, title = {Operational Behaviour of SWT}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer Nature}, publisher = {Fachhochschule Technikum Wien}, pages = {45 -- 56}, subject = {Wind Turbine}, language = {en} } @inproceedings{MarkoKubinger, author = {Marko, Thomas and Kubinger, Wilfried}, title = {Automatic Stereo Camera Calibration in Real-World Environments without Defined Calibration Objects}, series = {Proceedings of the 29th DAAAM International Symposium}, booktitle = {Proceedings of the 29th DAAAM International Symposium}, editor = {Katalinic, B.}, publisher = {DAAAM International}, address = {Vienna, Austria}, issn = {1726-9679}, subject = {Stereo Camera}, language = {en} } @inproceedings{LeonhartsbergerPremmSchidleretal., author = {Leonhartsberger, Kurt and Premm, C. and Schidler, Susanne and Werner, Andrea and Moisl, F.}, title = {Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks f{\"u}r netz- und systemdienliche Anwendungen}, series = {Tagungsband PV-Symposium 2018}, booktitle = {Tagungsband PV-Symposium 2018}, subject = {Photovoltaics}, language = {de} } @incollection{PeppoloniHirschlLeonhartsberger, author = {Peppoloni, Mauro and Hirschl, Alexander and Leonhartsberger, Kurt}, title = {Environmental Influences on SWT Vibrations and Oscillations}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer Nature}, publisher = {Fachhochschule Technikum Wien}, pages = {57 -- 78}, subject = {Wind Turbine}, language = {en} } @misc{SalzerLiousiaMonforteVilaetal., author = {Salzer, Elias and Liousia, Varvara and Monforte Vila, Xavier and R{\"u}nzler, Dominik}, title = {Tracking of small aquatic organisms with custom-made tracking plates}, subject = {Ecotoxicology}, language = {en} } @misc{SzwarcFuchsPurtscheretal., author = {Szwarc, Dorota and Fuchs, Christiane and Purtscher, Michaela and R{\"u}nzler, Dominik}, title = {Elucidating the molecular mechanisms underlying cardiac shock wave therapy}, subject = {Shockwave treatment}, language = {en} } @misc{KotzianRiessDavidetal., author = {Kotzian, Stefan and Riess, Bernhard and David, Veronika and Haider, Sandra and Spatt, Josef}, title = {Virtual Reality Training in der neurologischen Rehabilitation - Eine Praktikabilit{\"a}tsstudie zu einer Microsoft Kinect-Anwendung}, subject = {Neurology}, language = {de} } @misc{MenschikMallyGruberetal., author = {Menschik, Alfred and Mally, Franziska and Gruber, Martin and Sabo, Anton}, title = {EMG-Messungen am Unterwasserlaufband}, subject = {Electromyography}, language = {de} } @misc{Bayer, author = {Bayer, Natascha}, title = {Analysing the Impact of a Misaligned Toric Intraocular Lens on Wave Front Aberrations}, subject = {Mechanical Eye}, language = {en} } @misc{Bayer, author = {Bayer, Natascha}, title = {Analysis of Customized Ocular Data and Wave Front Aberrations Concerning their Deviations from Generic Eye Models}, subject = {Mechanical Eye}, language = {en} } @inproceedings{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {SPIN.OFF - SPeicherINtegration in das B{\"u}ro(OFFice)geb{\"a}ude FutureBase}, series = {Fachtagung Energietage 2018: Netzstabilit{\"a}t der Zukunft}, booktitle = {Fachtagung Energietage 2018: Netzstabilit{\"a}t der Zukunft}, subject = {Integration}, language = {de} } @inproceedings{JakischKrammerKraetzetal., author = {Jakisch, Philipp and Krammer, Christopher and Kr{\"a}tz, Thomas and Stukelj, Gasper and Werdenits, Lukas and H{\"o}ller, Roland and R{\"o}ssler, Peter}, title = {Field Programmable Analog Circuits and Arrays - An Overview}, series = {Proceedings of the IEEE International Conference on Electrical, Computer and Energy Technologies (ICECET), Cape Town, South Africa, Dec. 9-10, 2021}, booktitle = {Proceedings of the IEEE International Conference on Electrical, Computer and Energy Technologies (ICECET), Cape Town, South Africa, Dec. 9-10, 2021}, pages = {6}, subject = {Field Programmable Analog Arrays}, language = {en} } @article{EderVoronkoDimitriadisetal., author = {Eder, Gabriele C. and Voronko, Yuliya and Dimitriadis, Simon and Kn{\"o}bl, Karl and Ujv{\´a}ri, Guszt{\´a}v and Berger, Karl A. and Halwachs, Martin and Neumaier, Lukas and Hirschl, Christina}, title = {Climate specific accelerated ageing tests and evaluation of ageing induced electrical, physical, and chemical changes}, series = {Progress in Photovoltaics: Research and Applications 2018}, journal = {Progress in Photovoltaics: Research and Applications 2018}, pages = {1 -- 16}, subject = {Photovoltaik}, language = {en} } @inproceedings{ZeilingerHaukBaderetal., author = {Zeilinger, Marcel and Hauk, Raphael and Bader, Markus and Hofmann, Alexander}, title = {Design of an Autonomous Race Car for the Formula Student Driverless (FSD)}, series = {OAGM-ARW Workshop 2017}, booktitle = {OAGM-ARW Workshop 2017}, pages = {57 -- 62}, subject = {Autonomous Driving}, language = {en} } @article{OtrebskiRauerEngelhardtNowitzkietal., author = {Otrebski, Richard and Rauer, Johannes and Engelhardt-Nowitzki, Corinna and Kryvinska, Natalia and Aburaia, Mohamed and Pospisil, Dominik}, title = {Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling}, series = {International Journal of Ubiquitous Systems and Pervasive Networks (JUSPN)}, journal = {International Journal of Ubiquitous Systems and Pervasive Networks (JUSPN)}, number = {Volume 12, Issue 2}, subject = {Communication Modeling}, language = {en} } @inproceedings{SchneiderZelgerLaurent, author = {Schneider, Simon and Zelger, Thomas and Laurent, Pierre}, title = {Energy Building Stock Simulation and Planning for Small Municipalities - A Web-based Urban Energy System Model for Potential Analysis and Citizen Participation}, series = {Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS}, booktitle = {Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS}, address = {Funchal, Madeira}, subject = {Energy}, language = {en} } @article{EngelhardtNowitzkiAburaiaRauer, author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Rauer, Johannes}, title = {Research-based teaching in digital manufacturing and robotics - the Digital Factory at the UAS Technikum Wien as an exemplary case}, series = {CLF2020 TU Graz}, journal = {CLF2020 TU Graz}, subject = {Digital Manufacturing}, language = {en} } @inproceedings{WernerLeonhartsbergerSchidleretal., author = {Werner, Andrea and Leonhartsberger, Kurt and Schidler, Susanne and Galhaup, Michael}, title = {Innovation durch Kompetenzerweiterung - Der Nutzen des kooperativen Innovationslehrganges "smart(D)ER" f{\"u}r Unternehmen im T{\"a}tigkeitsfeld der dezentralen erneuerbaren Energiesysteme}, series = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018}, booktitle = {Tagungsband 12 Forschungsforum der {\"O}sterreichischen Fachhochschulen 2018}, subject = {Wind Power}, language = {de} } @misc{LeonhartsbergerIllichWerneretal., author = {Leonhartsberger, Kurt and Illich, Peter and Werner, Andrea and Schidler, Susanne}, title = {Community Storage Projects in private and commercial multi-party buildings}, subject = {Energy Storage}, language = {en} } @inproceedings{SchidlerWernerLeonhartsberger, author = {Schidler, Susanne and Werner, Andrea and Leonhartsberger, Kurt}, title = {Stromspeicher und {\"O}kologie - eine Frage der Definition. Zukunft der Geb{\"a}ude - digital-dezentral- {\"o}kologisch}, series = {E-Nova 2017 SCIENCE. RESEARCH. PANNONIA}, booktitle = {E-Nova 2017 SCIENCE. RESEARCH. PANNONIA}, subject = {Energy Source}, language = {de} } @inproceedings{MarkisPapaKaselautzkeetal., author = {Markis, Alexandra and Papa, Maximilian and Kaselautzke, David and Rathmair, Michael and Sattinger, Vinzenz and Brandst{\"o}tter, Mathias}, title = {Safety of Mobile Robot Systems in Industrial Applications}, series = {Proceedings of the Joint ARW \& OAGM Workshop 2019}, booktitle = {Proceedings of the Joint ARW \& OAGM Workshop 2019}, subject = {Robotics}, language = {en} } @incollection{HueblPeppoloniLeonhartsbergeretal., author = {H{\"u}bl, Stefan and Peppoloni, Mauro and Leonhartsberger, Kurt and Hirschl, Alexander}, title = {Assessment of the Impact of a Low-Rise Flat Roofed Building on Ambient Wind Conditions}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer}, address = {Trento}, publisher = {Fachhochschule Technikum Wien}, subject = {Wind Energy}, language = {en} } @incollection{HirschlPeppoloniLeonhartsberger, author = {Hirschl, Alexander and Peppoloni, Mauro and Leonhartsberger, Kurt}, title = {Evaluation of the Causes of Vibration and Oscillation in a Vertical Axis Small Wind Turbine (VASWT) and Its Reduction}, series = {Wind Energy Exploitation in Urban Environment}, booktitle = {Wind Energy Exploitation in Urban Environment}, publisher = {Springer}, address = {Trento}, publisher = {Fachhochschule Technikum Wien}, subject = {Wind Energy}, language = {en} } @book{EderMaulIllichetal., author = {Eder, Gabriele C. and Maul, Lukas and Illich, Peter and Folkerts, Wiep}, title = {Report IEA-PVPS T15-05: 2018BIPV research teams \& BIPV R\&D facilities}, isbn = {978-3-906042-74-9}, publisher = {Fachhochschule Technikum Wien}, pages = {95}, subject = {Photovoltaics}, language = {en} } @inproceedings{HirschlStorteckySchidleretal., author = {Hirschl, Alexander and Stortecky, Sebastian and Schidler, Susanne and Leonhartsberger, Kurt}, title = {Umweltbilanz geb{\"a}udemontierter Kleinwindkraftanlagen}, series = {11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019}, booktitle = {11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019}, subject = {Small Wind Plant}, language = {de} } @inproceedings{PichlerMeiselGoranovicetal., author = {Pichler, Mario and Meisel, Markus and Goranovic, Andrija and Leonhartsberger, Kurt}, title = {Decentralized Energy Networks based on Blockchain: Background, Overview and Concept Discussion}, series = {Proceeding BSCT 2018: 1st Workshop on Blockchain and Smart Contract Technologies}, booktitle = {Proceeding BSCT 2018: 1st Workshop on Blockchain and Smart Contract Technologies}, abstract = {This paper provides a snapshot of the globally ongoing decentralization of (business) relations in the energy sector. This tendency can be observed in other domains as well and is accompanied by new digital technological developments. Blockchain technology is assigned disruptive potential when it comes to realize those decentralization ideas. This hype about Blockchain is mainly company-driven without a solid academic basis yet. The authors are currently involved in several research efforts for utilizing distributed energy resources like photovoltaic systems, batteries and electric cars for the setup of energy communities and marketplaces. The paper, therefore, presents detailed investigations of background and motivations for decentralization and the building of (local) energy communities and (peer-to-peer) marketplaces for sustainable utilization of renewable energies. An overview of recent related Blockchain-based works is presented, and the current state and feasibility for the realization of the envisioned decentralized solutions are discussed. In this way, the work aimed at contributing to a research-based decision foundation for upcoming Blockchain-based decentralization efforts.}, subject = {Energy Network}, language = {en} } @techreport{ZelgerKerschbaumFigletal., author = {Zelger, Thomas and Kerschbaum, E. and Figl, H. and Huemer-Kals, V. and Gutmann, R. and Gruber, E. and Schneider, U. and Obermayer, J. and F{\"u}rst, B. and D{\"u}rk, N. and Kloiber, K. and Ornetzeder, M. and Capari, L.}, title = {Way2Smart Korneuburg: Start Up in eine sozial vertr{\"a}gliche, energieautonome Smart City}, subject = {Smart City}, language = {de} } @techreport{BergholdGangolyReisenhoferetal., author = {Berghold, Heimo and Gangoly, H. and Reisenhofer, G. and Zelger, Thomas and Heisinger, F.}, title = {Smart City Leoben: Stela - Smart Tower Enhancement Leoben Austria Endbericht}, subject = {Smart City}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {SPIN.OFF - SPeicherINtegration in das B{\"u}ro(OFFice)geb{\"a}ude FutureBase}, subject = {Storage}, language = {de} } @article{FairbrotherBoydLyuetal., author = {Fairbrother, Andrew and Boyd, Matthew and Lyu, Yadong and Avenet, Julien and Illich, Peter and Wang, Yu and Kempe, Michael and Dougherty, Brian and Bruckman, Laura and Gu, Xiaohong}, title = {Differential degradation patterns of photovoltaic backsheets at the array level}, series = {Solar Energy}, volume = {2018}, journal = {Solar Energy}, number = {163}, subject = {Photovoltaics}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Die Rolle von PV in lokalen und regionalen Energiesystemen und -communities}, subject = {Photovoltaics}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Die Mitwirkung von KundInnen an Batteriespeichernetzwerken}, subject = {Network}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {Flexibilit{\"a}tsoptionen in Privathaushalten. Viktor Kaplan Lectures}, subject = {Flexibility}, language = {de} } @misc{Leonhartsberger, author = {Leonhartsberger, Kurt}, title = {awarenESS - Machbarkeit von Gemeinschaftsspeichern}, subject = {Energy Storage}, language = {de} } @inproceedings{EderVoronkoDimitriadisetal., author = {Eder, C. and Voronko, Yuliya and Dimitriadis, Simon and Kn{\"o}bl, Karl and Ujv{\´a}ri, Guszt{\´a}v and Berger, Karl A. and Halwachs, Martin and Neumaier, Lukas and Hirschl, Christina}, title = {Influence of variable climatic stress conditions on performance and material degradation of PV-modules}, series = {SOPHIA PV-Reliability Workshop 2018, Ljubljana}, booktitle = {SOPHIA PV-Reliability Workshop 2018, Ljubljana}, subject = {Photovoltaics}, language = {en} } @inproceedings{EderVoronkoDimitriadisetal., author = {Eder, Gabriele C. and Voronko, Yuliya and Dimitriadis, Simon and Kn{\"o}bl, Karl and Ujv{\´a}ri, Guszt{\´a}v and Berger, Karl A. and Neumaier, Lukas}, title = {Climate Specific Accelerated Ageing Tests \& Evaluation of Ageing Induced Electrical, Physical and Chemical Changes}, series = {35th EU PVSEC 2018 5DO.7.4}, booktitle = {35th EU PVSEC 2018 5DO.7.4}, subject = {Photovoltaics}, language = {en} } @inproceedings{PoniszewskaMarandaIgnaczewskiMarkl, author = {Poniszewska-Maranda, Aneta and Ignaczewski, Bartosz and Markl, Erich}, title = {Towards the Cloud solutions in aspects of Distributed Business Services}, series = {Mobile Web and Intelligent Information Systems}, booktitle = {Mobile Web and Intelligent Information Systems}, editor = {Younas, Muhammad and Awan, Irfan and Ghinea, George and Catalan Cid, Marisa}, issn = {0302-9743}, subject = {Cloud Solutions}, language = {en} } @inproceedings{LeonhartsbergerHirschlPeppoloni, author = {Leonhartsberger, Kurt and Hirschl, Alexander and Peppoloni, Mauro}, title = {Evaluierung des Direktnutzungsanteils von Kleinwindenergieanlagen (KWEA) f{\"u}r unterschiedliche Standorte, Anlagen und Verbrauchergruppen}, series = {e-nova 2017: Zukunft der Geb{\"a}ude digital - dezentral - {\"o}kologisch}, booktitle = {e-nova 2017: Zukunft der Geb{\"a}ude digital - dezentral - {\"o}kologisch}, subject = {Wind Power}, language = {de} } @misc{LeiboldZelger, author = {Leibold, Jens and Zelger, Thomas}, title = {Projekt SC- Mikroquartiere - Modellierung verschiedener Nachverdichtungsszenarien und Optimierung bez{\"u}glich erneuerbarer Energieversorgung und der Lebensqualit{\"a}t der NutzerInnen}, subject = {Renewable Energy}, language = {de} } @misc{ZelgerLeiboldHuemerKals, author = {Zelger, Thomas and Leibold, Jens and Huemer-Kals, V.}, title = {Smart City Micro Quarters}, subject = {Smart City}, language = {en} } @misc{EderGabrieleKnoebletal., author = {Eder, C. and Gabriele, C. and Kn{\"o}bl, Karl and Maul, Lukas and Aichinger, Martin and Peharz, Gerhard and Nemitz, Wolfgang and Berger, Karl A.}, title = {Designed BIPV-elements with printed front-glass: Simulation und experimental evaluation of the effect of printing on the electrical performance}, series = {33th PV-SEC, Amsterdam}, journal = {33th PV-SEC, Amsterdam}, subject = {Photovoltaics}, language = {en} } @inproceedings{EderGabrieleKnoebletal., author = {Eder, C. and Gabriele, C. and Kn{\"o}bl, Karl and Maul, Lukas and Aichinger, Martin and Peharz, Gerhard and Nemitz, Wolfgang and Berger, Karl A.}, title = {Designed BIPV-elements with printed front-glass: Simulation und experimental evaluation of the effect of printing on the electrical performance}, series = {Advanced Building Skins, Bern ISBN: 978-3-9524883-1-7}, booktitle = {Advanced Building Skins, Bern ISBN: 978-3-9524883-1-7}, pages = {1295 -- 1303}, subject = {Photovoltaics}, language = {en} } @inproceedings{EderGrillbergerVoronkoetal., author = {Eder, Gabriele C. and Grillberger, Paul and Voronko, Yuliya and Kubitschek, Bernhard and Kn{\"o}bl, Karl}, title = {UV-Fluorescence measurements as tool for the detection of degradation effects in PV-modules}, series = {Proceedings of the European Weathering Symposium EWS}, booktitle = {Proceedings of the European Weathering Symposium EWS}, organization = {Gesellschaft f{\"u}r Umweltsimulation e.V. GUS}, subject = {Photovoltaics}, language = {en} } @article{MolinSchneiderRohdinetal., author = {Molin, Andreas and Schneider, Simon and Rohdin, Patrik and Moshfegh, Bahram}, title = {Assessing a regional building applied PV potential - Spatial and dynamic analysis of supply and load matching}, series = {Renewable Energy 91}, volume = {2016}, journal = {Renewable Energy 91}, number = {91}, pages = {261 -- 274}, subject = {Renewable Energy}, language = {en} } @misc{AichingerMaulKnoebletal., author = {Aichinger, Martin and Maul, Lukas and Kn{\"o}bl, Karl and Peharz, Gerhard and Nemitz, Wolfgang and Eder, Gabriele C. and Berger, Karl A.}, title = {Farbgestaltung von BIPV-Elementen durch Bedruckung der Front-Gl{\"a}ser : Simulation und Messung des Einflusses des Bedruckungsgrades}, subject = {Photovoltaics}, language = {de} } @inproceedings{EderVoronkoKubitscheketal., author = {Eder, Gabriele C. and Voronko, Yuliya and Kubitschek, Bernhard and Kn{\"o}bl, Karl}, title = {Fluorescence Spectroscopy and Imaging on aged polymeric PV Encapsulantes}, series = {20th European Symposium on Polymer Sprectroscopy 09/2016 Dresden DOI: 10.13140/RG.2.2.20827.36648}, booktitle = {20th European Symposium on Polymer Sprectroscopy 09/2016 Dresden DOI: 10.13140/RG.2.2.20827.36648}, subject = {Photovoltaics}, language = {en} } @inproceedings{EderVoronkoKubitscheketal., author = {Eder, Gabriele C. and Voronko, Yuliya and Kubitschek, Bernhard and Kn{\"o}bl, Karl}, title = {Fluorescence Spectroscopy and Imaging on aged polymeric PV Encapsulantes}, series = {Poster - {\"O}sterreichische PV-Tagung Villach 11/2016}, booktitle = {Poster - {\"O}sterreichische PV-Tagung Villach 11/2016}, subject = {Photovoltaics}, language = {en} } @inproceedings{GhaemiSchneider, author = {Ghaemi, Sara and Schneider, Simon}, title = {Potential analysis of residential Demand Response using GridLAB-D}, series = {IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society}, booktitle = {IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society}, pages = {8039 -- 8045}, subject = {Potential Analysis}, language = {en} } @inproceedings{BenederLechnerSchmitt, author = {Beneder, Roman and Lechner, Markus and Schmitt, Patrick}, title = {Development of a low-cost, open-source measurement equipment for undergraduate courses dedicated to embedded systems}, series = {17th IEEE International Conference on Smart Technologies (EUROCON 2017)}, booktitle = {17th IEEE International Conference on Smart Technologies (EUROCON 2017)}, pages = {187 -- 192}, subject = {Teaching}, language = {en} } @inproceedings{YalcinHimmelstoss, author = {Yalcin, Faruk and Himmelstoß, Felix}, title = {An Efficient Control Approach for DC-DC Buck-Boost Converter}, series = {4th International Symposium on Innovative Technologies in Engineering and Science (ISITES 2016)}, booktitle = {4th International Symposium on Innovative Technologies in Engineering and Science (ISITES 2016)}, pages = {1092 -- 1101}, subject = {Electronics}, language = {en} } @inproceedings{HimmelstossEdelmoser, author = {Himmelstoß, Felix and Edelmoser, Karl}, title = {Thermo-Puncture Devices - Mechanical and Electrical Concepts}, series = {Thermo Electronics and Motion Control PEMC}, booktitle = {Thermo Electronics and Motion Control PEMC}, address = {Varna}, pages = {221 -- 226}, subject = {Electronics}, language = {en} } @misc{HimmelstossEdelmoser, author = {Himmelstoß, Felix and Edelmoser, Karl}, title = {Thermo-Puncture Devices - Mechanical and Electrical Concepts}, subject = {Electronics}, language = {en} } @inproceedings{GlatzSchusterHoraueretal., author = {Glatz, Bernd and Schuster, Harald and Horauer, Martin and Rauscher, Thomas and Obermaisser, Roman}, title = {Fault Injection for IEC 61499 Applications}, series = {Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany, 2016-09-06 -- 2016-09-09}, booktitle = {Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany, 2016-09-06 -- 2016-09-09}, subject = {Embedded Systems}, language = {en} } @inproceedings{GerstmayerHausladenKrameretal., author = {Gerstmayer, Florian and Hausladen, J{\"u}rgen and Kramer, Michael and Horauer, Martin}, title = {A Binary Protection Framework for Embedded Systems Software}, series = {12th IEEE International Symposium on Industrial Embedded Systems (SIES 2017)}, booktitle = {12th IEEE International Symposium on Industrial Embedded Systems (SIES 2017)}, subject = {Protection Framework}, language = {en} } @misc{GerstmayerHausladenKrameretal., author = {Gerstmayer, Florian and Hausladen, J{\"u}rgen and Kramer, Michael and Horauer, Martin}, title = {A Binary Protection Framework for Embedded Systems Software}, subject = {Protection Framework}, language = {en} } @misc{GlatzSchusterHoraueretal., author = {Glatz, Bernd and Schuster, Harald and Horauer, Martin and Rauscher, Thomas and Obermaisser, Roman}, title = {Fault Injection for IEC 61499 Applications}, subject = {Embedded Systems}, language = {en} } @inproceedings{PuhmMahmoodBigleretal., author = {Puhm, Andreas and Mahmood, Aneeq and Bigler, Thomas and Ker{\"o}, Nikolaus}, title = {Synchronizing an IEEE 1588 Slave Clock Over Both Paths of a Redundant Ethernet System}, series = {2016 IEEE International Symposium on Precision Clock Synchronization for Measurement, Control and Communication}, booktitle = {2016 IEEE International Symposium on Precision Clock Synchronization for Measurement, Control and Communication}, subject = {Network}, language = {en} } @misc{HammerKlugPraus, author = {Hammer, Clemens and Klug, Johannes and Praus, Friedrich}, title = {KNX in academic education and training}, subject = {Education}, language = {en} } @misc{PrausGranzerBalog, author = {Praus, Friedrich and Granzer, Wolfgang and Balog, Peter}, title = {KNX security devices}, subject = {Security}, language = {en} } @inproceedings{PirghaibiHimmelstoss, author = {Pirghaibi, Koorosh and Himmelstoß, Felix}, title = {A Step-Down Converter with High Down-Scale Ratio}, series = {International Conference on Optimization of Electrical and Electronics Equipment (OPTIM 2017)}, booktitle = {International Conference on Optimization of Electrical and Electronics Equipment (OPTIM 2017)}, pages = {567 -- 572}, subject = {Electronics}, language = {en} } @inproceedings{HimmelstossEdelmoser, author = {Himmelstoß, Felix and Edelmoser, Karl}, title = {Current Measurement Device for High and Fast Changing Currents}, series = {Power Conversion and Intelligent Motion (PCIM 2017)}, booktitle = {Power Conversion and Intelligent Motion (PCIM 2017)}, pages = {1311 -- 1314}, subject = {Electronics}, language = {en} } @inproceedings{KomodromosMettourisAchilleosetal., author = {Komodromos, Marios and Mettouris, Christos and Achilleos, Achilleas and Papadopoulos, George and Veigl, Christoph and Deinhofer, Martin and Doppler, Alfred and Schuerz, Stefan}, title = {A Runtime Middleware for Enabling Application Integration and Rapid Re-Engineering}, series = {5th International Conference on Intelligent Software Methodologies, Tools and Techniques, September 12-14, Larnaca, Cyprus}, booktitle = {5th International Conference on Intelligent Software Methodologies, Tools and Techniques, September 12-14, Larnaca, Cyprus}, subject = {Middleware}, language = {en} } @inproceedings{BenederLechnerSchmitt, author = {Beneder, Roman and Lechner, Markus and Schmitt, Patrick}, title = {Increasing the accessibility of measurement equipment for undergraduate courses dedicated to Embedded Systems}, series = {IEEE Global Engineering Education Conference (EDUCON 2017)}, booktitle = {IEEE Global Engineering Education Conference (EDUCON 2017)}, pages = {161 -- 164}, subject = {Measurement Equipment}, language = {en} } @article{HimmelstossDerinCernat, author = {Himmelstoß, Felix and Derin, Ali Riza and Cernat, Mihai}, title = {Boost Converter with Active Snubber Network}, series = {Advances in Electrical and Computer Engineering}, volume = {17}, journal = {Advances in Electrical and Computer Engineering}, number = {1}, pages = {55 -- 60}, subject = {Electronics}, language = {en} } @misc{HimmelstossEdelmoser, author = {Himmelstoß, Felix and Edelmoser, Karl}, title = {Current Measurement Device for High and Fast Changing Currents}, subject = {Electronics}, language = {en} } @misc{KomodromosMettourisAchilleosetal., author = {Komodromos, Marios and Mettouris, Christos and Achilleos, Achilleas and Papadopoulos, George and Veigl, Christoph and Deinhofer, Martin and Doppler, Alfred and Schuerz, Stefan}, title = {A Runtime Middleware for Enabling Application Integration and Rapid Re-Engineering}, subject = {Middleware}, language = {en} } @misc{PuhmMahmoodBigleretal., author = {Puhm, Andreas and Mahmood, Aneeq and Bigler, Thomas and Ker{\"o}, Nikolaus}, title = {Synchronizing an IEEE 1588 Slave Clock Over Both Paths of a Redundant Ethernet System}, subject = {Network}, language = {en} } @misc{ZeilingerHaukBaderetal., author = {Zeilinger, Marcel and Hauk, Raphael and Bader, Markus and Hofmann, Alexander}, title = {Design of an Autonomous Race Car for the Formula Student Driverless (FSD)}, subject = {Autonomous Driving}, language = {en} } @misc{Sommer, author = {Sommer, Thomas}, title = {Ein Blick in die Zukunft der Kommunikationsnetze: Die f{\"u}nfte Generation (5G) der Mobilfunknetze, Virtualisierung der Netzfunktionen und Software-definierte Netze, Herausforderungen an die Netzsicherheit}, subject = {Communication Network}, language = {de} } @inproceedings{TabakovicCsapo, author = {Tabakovic, Momir and Csapo, Csilla}, title = {Industry - University cooperation in the renewable energy field in south Africa- Gap analysis and enhancement proposals}, series = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz}, booktitle = {UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz}, subject = {Renewable Energies}, language = {en} } @inproceedings{ValckenborgBergerUjvarietal., author = {Valckenborg, Roland and Berger, Karl A. and {\´U}jv{\´a}ri, Guszt{\´a}v and Eder, Gabriele C. and Gaisberger, Lukas and Tabakovic, Momir and Polo Lopez, Christina S. and Boddaert, Simon and del Buono, Matteo and Mart{\´i}n Chivelet, Nuria and Sanz Martinez, Asier and Kim, Jun-Tae and Gerd Imenes, Anne}, title = {COMPARISON OF IEC 61853-1 MATRIX EVALUATIONS BASED ON INDOOR AND OUTDOOR MEASUREMENT DATA FROM PVPS TASK 15 BIPV ROUND-ROBIN}, series = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021}, booktitle = {38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021}, subject = {Measurement}, language = {en} } @misc{BucherAburaiaMarkletal., author = {Bucher, Christoph Michael and Aburaia, Mohamed and Markl, Erich and Engelhardt-Nowitzki, Corinna and Lackner, Maximilian and Gonzales-Gutierrez, J. and Lammer, Helmuth}, title = {Continuous fiber reinforced freeform 3D printing}, subject = {Additive Manufacturing}, language = {en} } @article{WoeberRauerPapaetal., author = {W{\"o}ber, Wilfried and Rauer, Johannes and Papa, Maximilian and Aburaia, Ali and Schwaiger, Simon and Novotny, Georg and Aburaia, Mohamed and Kubinger, Wilfried}, title = {Evaluierung von Navigationsmethoden f{\"u}r mobile Roboter}, series = {e \& i Elektrotechnik und Informationstechnik}, journal = {e \& i Elektrotechnik und Informationstechnik}, subject = {Robotics}, language = {de} } @inproceedings{SchneiderZelgerTabakovic, author = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir}, title = {State of play and future of small-town urban buildings guided by an energy-autonomy vision statement: consumption, calculation and potential embedded in Smart City Demo Way2Smart}, series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, pages = {62 -- 66}, subject = {Smart City}, language = {en} } @inproceedings{SchwaigerAburaiaAburaiaetal., author = {Schwaiger, Simon and Aburaia, Mohamed and Aburaia, Ali and W{\"o}ber, Wilfried}, title = {Explainable Artificial Intelligence for Robot Arm Control}, series = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna}, volume = {32}, booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing \& Automation`, 28-29th October 2021, Vienna}, number = {1}, pages = {0640 -- 0647}, subject = {Artificial Intelligence}, language = {en} } @article{SchneiderBartlmaeLeiboldetal., author = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}fmann, Petra and Tabakovic, Momir and Zelger, Thomas}, title = {New Assessment Method for Buildings and Districts towards "Net Zero Energy Buildings" Compatible with the Energy Scenario 2050}, series = {REAL CORP 2019}, journal = {REAL CORP 2019}, number = {April 2019}, subject = {Renewable Energies}, language = {en} } @incollection{KrieglerWoeberAburaia, author = {Kriegler, Andreas and W{\"o}ber, Wilfried and Aburaia, Mohamed}, title = {Artificial Neural Networks Based Place Categorization}, series = {Digital Conversion on the Way to Industry 4.0}, booktitle = {Digital Conversion on the Way to Industry 4.0}, publisher = {Springer Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {201 -- 209}, subject = {Artificial Intelligence}, language = {en} } @article{EngelhardtNowitzkiAburaiaOtrebskietal., author = {Engelhardt-Nowitzki, Corinna and Aburaia, Mohamed and Otrebski, Richard and Rauer, Johannes and Orsolits, Horst}, title = {Research-based teaching in Digital Manufacturing and Robotics - the Digital Factory at the UAS Technikum Wien as a Case Example}, series = {Procedia Manufacturing}, journal = {Procedia Manufacturing}, number = {Volume 45}, pages = {164 -- 170}, subject = {Digital Factory}, language = {en} } @incollection{FelberAburaiaWoeberetal., author = {Felber, Stefan Otto and Aburaia, Mohamed and W{\"o}ber, Wilfried and Lackner, Maximilian}, title = {Parameter Optimization for the 3D Print of Thermo-Plastic Pellets with an Industrial Robot}, series = {Digital Conversion on the Way to Industry 4.0}, booktitle = {Digital Conversion on the Way to Industry 4.0}, publisher = {Fachhochschule Technikum Wien}, pages = {236 -- 247}, subject = {Thermo Plastics}, language = {en} } @article{RauerAburaiaWoeber, author = {Rauer, Johannes and Aburaia, Mohamed and W{\"o}ber, Wilfried}, title = {Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Graspin}, series = {Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020}, journal = {Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020}, pages = {2 -- 3}, subject = {Robotics}, language = {en} } @inproceedings{AbdankAburaiaWoeber, author = {Abdank, Moritz and Aburaia, Mohamed and W{\"o}ber, Wilfried}, title = {Using-Colour-Based Object Detection for Pick and Place Applications}, series = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna}, volume = {32}, booktitle = {Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing \& Automation', 28-29th October 2021, Vienna}, number = {1}, pages = {0536 -- 0541}, subject = {Computer Vision}, language = {en} } @inproceedings{KrieglerWoeber, author = {Kriegler, Andreas and W{\"o}ber, Wilfried}, title = {Vision-based Docking of a Mobile Robot}, series = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020}, booktitle = {Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020}, pages = {6 -- 12}, subject = {Automation}, language = {en} } @inproceedings{Lackner, author = {Lackner, Maximilian}, title = {Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production}, series = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, subject = {Process Engineering}, language = {en} } @misc{SchneiderTabakovic, author = {Schneider, Simon and Tabakovic, Momir}, title = {Aktueller Stand und Zukunft von stadteigenen Geb{\"a}uden einer Kleinstadt mit energieautonomen Leitbild: Verbrauch, Berechnung und Potential im Rahmen von Smart City Demo Way2Smart}, subject = {Smart City}, language = {de} } @article{RuessKristenEckeltetal., author = {Ruess, Christian and Kristen, Karl-Heinz and Eckelt, Markus and Mally, Franziska and Litzenberger, Stefan and Sabo, Anton}, title = {Stand up Paddle Surfing - An Aerobic Workout and Balance Training}, series = {Procedia Engineering}, volume = {60}, journal = {Procedia Engineering}, number = {0}, pages = {62 -- 66}, subject = {Stand-Up Paddling}, language = {en} } @article{SchindelkaLitzenbergerSabo, author = {Schindelka, Bernhard and Litzenberger, Stefan and Sabo, Anton}, title = {Body Climate Differences for Men and Women Wearing Functional Underwear during Sport at Temperatures Below Zero Degrees Celsius}, series = {Procedia Engineering}, volume = {60}, journal = {Procedia Engineering}, number = {0}, pages = {46 -- 50}, subject = {Body Climate}, language = {en} } @article{MallyLitzenbergerSabo, author = {Mally, Franziska and Litzenberger, Stefan and Sabo, Anton}, title = {Surface Electromyography Measurements of Dorsal Muscle Cross-Activation in Therapeutic Climbing}, series = {Procedia Engineering}, volume = {60}, journal = {Procedia Engineering}, number = {0}, pages = {22 -- 27}, subject = {Muscle Activity}, language = {en} } @article{RuessKristenEckeltetal., author = {Ruess, Christian and Kristen, Karl-Heinz and Eckelt, Markus and Mally, Franziska and Litzenberger, Stefan and Sabo, Anton}, title = {Acticvity of Trunk and Leg Muscles during Stand Up Paddle Surfing}, series = {Procedia Engineering}, volume = {60}, journal = {Procedia Engineering}, number = {0}, pages = {57 -- 61}, subject = {Muscle Activity}, language = {en} } @inproceedings{WoeberAburaiaAburaiaetal., author = {W{\"o}ber, Wilfried and Aburaia, Ali and Aburaia, Mohamed and Kubinger, Wilfried and Otrebski, Richard and Engelhardt-Nowitzki, Corinna and Markl, Erich}, title = {Digital Manufacturing \& Robotics im Department Industrial Engineering}, series = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme}, booktitle = {KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme}, subject = {Digital Manufacturing}, language = {de} } @inproceedings{ThieleKafkaLitzenbergeretal., author = {Thiele, Gerrit and Kafka, Patricia and Litzenberger, Stefan and Sabo, Anton}, title = {Neck Braces in Motocross: Different Designs and Their Effects on Muscular Activity of the Neck}, series = {Procedia Engineering}, booktitle = {Procedia Engineering}, pages = {71 -- 76}, subject = {Motocross}, language = {en} } @inproceedings{LitzenbergerMallySabo, author = {Litzenberger, Stefan and Mally, Franziska and Sabo, Anton}, title = {Influence of Different Seating and Crank Positions on Muscular Activity in Elite Handcycling - A Case Study}, series = {Procedia Engineering}, booktitle = {Procedia Engineering}, pages = {355 -- 360}, subject = {Handcycling}, language = {en} } @misc{LitzenbergerMallySabo, author = {Litzenberger, Stefan and Mally, Franziska and Sabo, Anton}, title = {Influence of Different Seating and Crank Positions on Muscular Activity in Elite Handcycling - A Case Study}, subject = {Handcycling}, language = {en} } @inproceedings{TravnicekLitzenbergerSabo, author = {Travnicek, Peter and Litzenberger, Stefan and Sabo, Anton}, title = {Love at First Try? How Reliable is a First Impression for Selecting a Golf Putter?}, series = {Procedia Engineering}, booktitle = {Procedia Engineering}, pages = {65 -- 70}, subject = {Golf}, language = {en} } @inproceedings{LacknerZanglLembacheretal., author = {Lackner, Maximilian and Zangl, Sabine and Lembacher, Harald and R{\"u}ttinger, Norbert and Fochler, Claus}, title = {Non-wovens and recycling - An overview, International Conference on Recycling and Waste Water Management}, series = {International Conference on Recycling and Waste Water Management}, booktitle = {International Conference on Recycling and Waste Water Management}, subject = {Environment}, language = {en} } @article{SchneiderBartlmaeLeiboldetal., author = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}ffmann, Petra and Tabakovic, Momir and Zelger, Thomas}, title = {New assessment method for buildings and districts towards "Net Zero Energy Buildings" compatible with the energy scenario 2050}, series = {Corp}, journal = {Corp}, pages = {10}, subject = {Energy Technologies}, language = {en} } @inproceedings{TabakovicSchneiderLeiboldetal., author = {Tabakovic, Momir and Schneider, Simon and Leibold, Jens and Zelger, Thomas and Bartlm{\"a}, Nadja and Holzer, Peter and Sch{\"o}ffmann, Petra}, title = {Way to positive energy districts in Vienna}, series = {Mission Innovation Austria}, booktitle = {Mission Innovation Austria}, subject = {Energy Technologies}, language = {en} } @inproceedings{RauhOrsolits, author = {Rauh, Sebastian and Orsolits, Horst}, title = {Perspectives on Virtual Reality in Higher Education for Robotics and Related Engineering Disciplines}, series = {Robotics in Education (International Conference on Robotics in Education)}, booktitle = {Robotics in Education (International Conference on Robotics in Education)}, publisher = {Springer}, isbn = {978-3-031-12848-6}, pages = {39 -- 51}, abstract = {Industrial engineering education has a strong focus on and affinity towards technology. While Virtual Reality hardware and applications advance and learning behaviour changes, it is particularly interesting to determine the possible use of Virtual Reality for teaching engineering subjects, for example fundamentals of robotics. This paper presents a study which examines the possible use of Virtual Reality learning environments at higher learning institutions. The study shows perspectives of students and lecturers and identifies opportunities and challenges for the use of Virtual Reality in industrial engineering education. The results of the indicated study show that the participants have a positive attitude towards Virtual Reality and strong motivation for in class use. The study results also suggest, that Virtual Reality content creation should be included in engineering curricula.}, subject = {Virtual reality}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves}, subject = {Generator}, language = {en} } @misc{MarklOrsolitsStojicic, author = {Markl, Erich and Orsolits, Horst and Stojicic, Dario}, title = {Virtuelle Technologien in der Robotik}, subject = {Robotics}, language = {de} } @phdthesis{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversion of waste heat into electric energy by thermoelectric generators}, school = {Fachhochschule Technikum Wien}, abstract = {The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber.}, subject = {Energy Technologies}, language = {en} } @misc{OrsolitsGallasch, author = {Orsolits, Horst and Gallasch, Andreas}, title = {Make a 25 Year old Claw Crane Digital with Thingworx}, subject = {Crane}, language = {en} } @misc{Orsolits, author = {Orsolits, Horst}, title = {Using AR to Build a Digital Twin Robotics Laboratory}, organization = {PTC Academic Session}, subject = {Augmented Reality}, language = {en} } @inproceedings{ChiritaTabakovic, author = {Chirita, Cristian and Tabakovic, Momir}, title = {Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber}, series = {X International Conference Industrial Engineering and Environmental Protection}, booktitle = {X International Conference Industrial Engineering and Environmental Protection}, pages = {143 -- 151}, subject = {Generators}, language = {en} } @book{Lackner, author = {Lackner, Maximilian}, title = {Digital Conversion on the Way to Industry 4.0, Selected Papers from ISPR 2020}, publisher = {Springer E-Book}, publisher = {Fachhochschule Technikum Wien}, subject = {Engineering}, language = {en} } @techreport{OrsolitsKorn, author = {Orsolits, Horst and Korn, Alexander}, title = {Augmented Reality basierte Robotik-Lehre}, organization = {Gesellschaft f{\"u}r Informatik e.V., Wettbewerbsband AVRiL 2021}, pages = {8}, abstract = {Diese Arbeit beschreibt eine Augmented Reality (AR) Applikation f{\"u}r den Einsatz in der Hochschullehre zum Thema Industrierobotik. Ziel ist es, sowohl das Lehren als auch das Lernen grundlegender Robotik-Inhalte durch die Bereitstellung einer interaktiven Methode zur Vermittlung der Lehrinhalte f{\"u}r Studierende zu verbessern. Die Studierenden sind in der Lage, direkt mit dem virtuellen Modell eines Industrieroboters zu interagieren und so selbstgesteuert die Lerninhalte zu vertiefen. Diese interaktive Methode verbindet die Studierenden direkt mit den Lehrinhalten und f{\"o}rdert das selbsterforschende Lernen. Eine weitere Anwendungsm{\"o}glichkeit sieht die Kombination einer Lektorenversion der AR Experience mit der Studierendenversion vor. Der Lektor hat die M{\"o}glichkeit, das Modell in AR zu steuern bzw. zu ver{\"a}ndern und die Studierenden k{\"o}nnen auf Ihren Mobilger{\"a}ten die {\"A}nderungen live in AR mitverfolgen, um so auch im Distance Learning eine Verbindung Lektor - Studierende - Inhalt zus{\"a}tzlich zu Videokonferenz-Tools herzustellen.}, subject = {Augmented Reality}, language = {de} } @misc{TabakovicHemis, author = {Tabakovic, Momir and Hemis, Herbert}, title = {Energieversorgungsl{\"o}sungen auf Quartiersebene}, subject = {Energy Systems}, language = {de} } @inproceedings{TabakovicBoecklBergeretal., author = {Tabakovic, Momir and B{\"o}ckl, Benjamin and Berger, Michael A. and Hermis, Herbert and Nauschegg, Daniel and Wall, Johannes}, title = {Energieversorgungsl{\"o}sungen auf Quartiersebene}, series = {World Energy Council Austria Young Energy Professionals}, booktitle = {World Energy Council Austria Young Energy Professionals}, subject = {Energy Systems}, language = {en} } @misc{KamravamaneshPflueglHerwigetal., author = {Kamravamanesh, Donya and Pfl{\"u}gl, Stefan and Herwig, Christoph and Lackner, Maximilian}, title = {Optimization of process parameters to enhance PHA accumulation in Synechosystis sp. PCC 6714 using multivariate design of experiments}, subject = {Bacteria}, language = {en} } @book{OrsolitsLackner, author = {Orsolits, Horst and Lackner, Maximilian}, title = {Virtual Reality und Augmented Reality in der Digitalen Produktion}, editor = {Lackner, Maximilian and Orsolits, Horst}, publisher = {Springer Gabler}, isbn = {978-3-658-29009-2}, publisher = {Fachhochschule Technikum Wien}, subject = {Virtual Reality}, language = {de} } @incollection{LacknerMarklCermak, author = {Lackner, Maximilian and Markl, Erich and Cermak, Corinna}, title = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail}, series = {Transportation Systems Analysis and Assessment}, booktitle = {Transportation Systems Analysis and Assessment}, publisher = {Fachhochschule Technikum Wien}, abstract = {This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed.}, subject = {Energy}, language = {en} } @inproceedings{RauerWoeberAburaia, author = {Rauer, Johannes and W{\"o}ber, Wilfried and Aburaia, Mohamed}, title = {An Autonomous Mobile Handling Robot Using Object Recognition}, series = {Proceedings of ARW \& OAGM Workshop 2019}, booktitle = {Proceedings of ARW \& OAGM Workshop 2019}, subject = {Mobile Robotics}, language = {en} } @inproceedings{AburaiaLacknerGruenbichleretal., author = {Aburaia, Mohamed and Lackner, Maximilian and Gr{\"u}nbichler, Hannes and Engelhardt-Nowitzki, Corinna and Markl, Erich and Lammer, H. and Zhang, Haiguang and Wang, J. and Sapotka, J. and Janics, T. and Hailberger, M.}, title = {Freeform-FDM process development using natural fibre reinforced biopolymers}, series = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK}, booktitle = {2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK}, subject = {Freeform Printing}, language = {en} } @inproceedings{DannerederPachschwoellAburaiaetal., author = {Dannereder, Florian and Pachschw{\"o}ll, Paul and Aburaia, Mohamed and Markl, Erich and Lackner, Maximilian and Engelhardt-Nowitzki, Corinna and Shooman, Diane}, title = {Development of a 3D-printed Bionic Hand with Muscle- and Force Control}, series = {Austrian Robotics Workshop 2018}, booktitle = {Austrian Robotics Workshop 2018}, subject = {Robotics}, language = {en} } @inproceedings{SchneiderZelgerTabakovic, author = {Schneider, Simon and Zelger, Thomas and Tabakovic, Momir}, title = {Combining bottom-up and top-down approaches to converge heterogeneous building data into a homogenous, interactive and expandable energy autonomy platform}, series = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, booktitle = {BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress f{\"u}r zukunftsf{\"a}higes Bauen}, subject = {Energy Autonomy}, language = {en} } @inproceedings{TabakovicvanSarkLouwenetal., author = {Tabakovic, Momir and van Sark, Wilfried and Louwen, Atse and Weiss, Ingrid and Arancon, Sofia and Makrides, George and Hadjipanayi, Maria and Loucaidou, Eliza}, title = {Development of BIPV courseware for students and professionals}, series = {Proceeding: Austrian PV Conference}, booktitle = {Proceeding: Austrian PV Conference}, subject = {Course Material}, language = {en} } @inproceedings{Tabakovic, author = {Tabakovic, Momir}, title = {Direct conversation of waste heat from solid-fuel stove into electric energy using a high temperature thermoelectric generator compared to Bi2Te3 thermoelectric generator}, series = {Proceeding: ISEC 2018}, booktitle = {Proceeding: ISEC 2018}, subject = {Energy Conversion}, language = {en} } @techreport{TabakovicFechnerLeonhartsberger, author = {Tabakovic, Momir and Fechner, Hubert and Leonhartsberger, Kurt}, title = {National Survey Report of PV Power Applications in Austria 2017}, series = {IEA- International Energy Agency}, journal = {IEA- International Energy Agency}, subject = {Photovoltaics}, language = {en} } @article{HaasMarklLackner, author = {Haas, Theodor and Markl, Erich and Lackner, Maximilian}, title = {Innovative use of waste tyres: Noise-barriers and geoengineering}, series = {World Journal of Advanced Engineering Technology and Sciences}, journal = {World Journal of Advanced Engineering Technology and Sciences}, subject = {Engineering}, language = {en} } @incollection{TabakovicOttoCommerelletal., author = {Tabakovic, Momir and Otto, Marc-Oliver and Commerell, Walter and Csapo, Csilla and Vermaak, Herman}, title = {Increase industry cooperation in post graduate education via OpenLab's and MobileLab's in South Africa}, series = {Smart Education and e-Learning 2020}, booktitle = {Smart Education and e-Learning 2020}, publisher = {Springer Verlag}, publisher = {Fachhochschule Technikum Wien}, pages = {623 -- 629}, abstract = {This paper will present the concepts of the EURYDICE project funded by the Erasmus + program. Within this project the focus on renewable energies with the overall goal to enhance employability. The energy generation landscape in South Africa is undergoing a fundamental transition, as the vision of the energy strategy is to contribute to an affordable energy for all. This vision will be supported by innovative labs and portals which will be developed within this project. One of the goals is closing the gap between TVET (Technical and Vocational Education and Training Colleges) studies and diploma study by the definition of industrial experience requirements for University of Technology (UoT) diploma students. This leads to an increased preparedness and "studyability" of UoT diploma students. Industrial stakeholders will be integrated into the process. The project will develop an "Industrial Portal" as a working tool. To increase industry cooperation in post graduate education "OpenLabs" and "MobileLabs" will be developed within the project. It is intended that industry brings industrial problems into the "Labs", which will then be solved by the students.}, subject = {Mobile Labs}, language = {en} } @inproceedings{TabakovicWuerflGuerraetal., author = {Tabakovic, Momir and W{\"u}rfl, Marlen and Guerra, Eduardo and Gutleder, Miriam}, title = {Operating models for PV systems in existing residential building complexes in Vienna - challenges and opportunities}, series = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, booktitle = {XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021)}, abstract = {This paper aims to identify challenges and opportunities that are associated with installing PV (Photovoltaic) systems in existing residential building complexes in Vienna. For this purpose, a project-oriented approach was chosen and hence a representative residential building complex in Vienna was chosen and analyzed to demonstrate the challenges that are associated with such projects. Furthermore, a particular focus lies on exploring different operating models that are available when it comes to the execution of such a project. As this paper builds on the rather novel topic of exploring new operating models for installing PV systems on existing residential building complexes in Vienna, many further suggestions for research can be identified that exceed the scope of this paper.}, subject = {Photovoltaics}, language = {en} } @inproceedings{Lackner, author = {Lackner, Maximilian}, title = {Combination of Devulcanization and Reactive Extrusion for Value-Added Rubber Recycling}, series = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, booktitle = {Webinar on Biopolymers \& Bioplastics, Meetings International,}, subject = {Recycling}, language = {en} } @misc{Tabakovic, author = {Tabakovic, Momir}, title = {International Weeks als Plattformen f{\"u}r l{\"a}nder{\"u}bergreifende Zusammenarbeit}, subject = {Internationalisation}, language = {de} } @article{ZanglPingitzerLembacheretal., author = {Zangl, Sabine and Pingitzer, D. and Lembacher, Harald and Lackner, Maximilian}, title = {Carbon footprint reduction in households using professional services - example of laundry cleaning}, series = {Pubtexto}, journal = {Pubtexto}, subject = {Sustainability}, language = {en} } @inproceedings{FibichHorauerObermaisser, author = {Fibich, Christian and Horauer, Martin and Obermaisser, Roman}, title = {HLShield: A Reliability Enhancement Framework for High-Level Synthesis}, series = {12th IEEE International Symposium on Industrial Embedded Systems (SIES 2017)}, booktitle = {12th IEEE International Symposium on Industrial Embedded Systems (SIES 2017)}, subject = {Embedded Systems}, language = {en} } @inproceedings{ForjanFrohner, author = {Forjan, Mathias and Frohner, Matthias}, title = {Development of the mCM - mobile circulatory module - for ex-vivo physiological tissue for breathing simulation}, series = {Abstracts of the 9th World Congress on Alternatives and Animal Use in the Life Sciences (ALTEX Proceedings) 2014}, booktitle = {Abstracts of the 9th World Congress on Alternatives and Animal Use in the Life Sciences (ALTEX Proceedings) 2014}, pages = {52 -- 52}, subject = {Lung Simulator}, language = {en} } @misc{ForjanFrohner, author = {Forjan, Mathias and Frohner, Matthias}, title = {Development of the mCM - mobile circulatory module - for ex-vivo physiological tissue for breathing simulation}, subject = {Lung Simulator}, language = {en} } @misc{PastekaForjan, author = {Pasteka, Richard and Forjan, Mathias}, title = {Evaluation of an Active Lung Simulator for Aerosol Inhalation Test Replacement}, subject = {Lung Simulator}, language = {en} } @inproceedings{BululukovaKramerWahletal., author = {Bululukova, Darya and Kramer, Michael and Wahl, Harald and Schwanzer, Susanne}, title = {Gender-inclusive laboratory design for teaching electric vehicle components}, series = {IEEE Global Engineering Education Conference (EDUCON 2017)}, booktitle = {IEEE Global Engineering Education Conference (EDUCON 2017)}, pages = {1345 -- 1353}, subject = {Gender}, language = {en} } @misc{KirchwegerRohatschWahl, author = {Kirchweger, Theresa and Rohatsch, Lukas and Wahl, Harald}, title = {Multimodale Echtzeitverkehrsauskunft - Mithilfe von Open Data p{\"u}nklich zur U-Bahn}, subject = {Smart Mobility Application}, language = {de} } @misc{DavidForjan, author = {David, Veronika and Forjan, Mathias}, title = {User Centered Design - Einbindung und Nutzung in Forschungsprojekten}, subject = {Research Project}, language = {de} } @inproceedings{FibichTaunerRoessleretal., author = {Fibich, Christian and Tauner, Stefan and R{\"o}ssler, Peter and Horauer, Martin}, title = {Evaluation of Open-Source Linear Algebra Libraries targeting ARM and RISC-V Architectures}, series = {Proceedings of the 2020 15th Conference on Computer Science and Information Systems (FedCSIS), 6-9 September 2020, Sofia, Bulgaria}, booktitle = {Proceedings of the 2020 15th Conference on Computer Science and Information Systems (FedCSIS), 6-9 September 2020, Sofia, Bulgaria}, pages = {663 -- 672}, subject = {Embedded Systems}, language = {en} } @inproceedings{FibichHorauerObermaisser, author = {Fibich, Christian and Horauer, Martin and Obermaisser, Roman}, title = {Device- and Temperature Dependency of Systematic Fault Injection Results in Artix-7 and iCE40 FPGAs}, series = {Proceedings of the 2021 Design, Automation \& Test in Europe Conference \& Exhibition (DATE), 1-5 February 2021, Grenoble, France}, booktitle = {Proceedings of the 2021 Design, Automation \& Test in Europe Conference \& Exhibition (DATE), 1-5 February 2021, Grenoble, France}, pages = {1600 -- 1605}, subject = {FPGA}, language = {en} } @misc{BululukovaKramerWahletal., author = {Bululukova, Darya and Kramer, Michael and Wahl, Harald and Schwanzer, Susanne}, title = {Gender-inclusive laboratory design for teaching electric vehicle components}, subject = {Gender}, language = {en} } @article{WoeberMehnenCurtoetal., author = {W{\"o}ber, Wilfried and Mehnen, Lars and Curto, Manuel and Dias Tibihika, Papius and Tesfaye, Genanaw and Meimberg, Harald}, title = {Investigating Shape Variation Using Generalized Procrustes Analysis and Machine Learning}, series = {Applied Sciences}, volume = {2022}, journal = {Applied Sciences}, number = {12(6), 3158}, pages = {26}, abstract = {Abstract: The biological investigation of a population's shape diversity using digital images is typi- cally reliant on geometrical morphometrics, which is an approach based on user-defined landmarks. In contrast to this traditional approach, the progress in deep learning has led to numerous applications ranging from specimen identification to object detection. Typically, these models tend to become black boxes, which limits the usage of recent deep learning models for biological applications. However, the progress in explainable artificial intelligence tries to overcome this limitation. This study compares the explanatory power of unsupervised machine learning models to traditional landmark-based approaches for population structure investigation. We apply convolutional autoencoders as well as Gaussian process latent variable models to two Nile tilapia datasets to investigate the latent structure using consensus clustering. The explanatory factors of the machine learning models were extracted and compared to generalized Procrustes analysis. Hypotheses based on the Bayes factor are formulated to test the unambiguity of population diversity unveiled by the machine learning models. The findings show that it is possible to obtain biologically meaningful results relying on unsupervised machine learning. Furthermore we show that the machine learning models unveil latent structures close to the true population clusters. We found that 80\% of the true population clusters relying on the convolutional autoencoder are significantly different to the remaining clusters. Similarly, 60\% of the true population clusters relying on the Gaussian process latent variable model are significantly different. We conclude that the machine learning models outperform generalized Procrustes analysis, where 16\% of the population cluster was found to be significantly different. However, the applied machine learning models still have limited biological explainability. We recommend further in-depth investigations to unveil the explanatory factors in the used model. Keywords: generalized procrustes analysis; machine learning; convolutional autoencoder; Gaussian process latent variable models}, subject = {generalized procrustes analysis}, language = {en} } @article{SnizekRisserBelletal., author = {Snizek, S. and Risser, Ralf and Bell, Daniel and F{\"u}ssl, E. and Hulmak, M. and Kaufmann, C.}, title = {Effiziente Verkehrsabwicklung durch Alternativerouten - EVA}, series = {Bundesministerium f{\"u}r Verkehr, Innovation und Technologie. Straßenforschung}, journal = {Bundesministerium f{\"u}r Verkehr, Innovation und Technologie. Straßenforschung}, number = {Heft 593}, subject = {Mobility}, language = {de} } @incollection{LinkBellHauptetal., author = {Link, C. and Bell, Daniel and Haupt, J. and Jonuschat, H.}, title = {Mobil mit Smartwatch: Ergebnisse eines Prototypentests}, series = {Mobility In A Global World}, booktitle = {Mobility In A Global World}, publisher = {University of Bamberg Press}, address = {Bamberg}, publisher = {Fachhochschule Technikum Wien}, subject = {Mobility}, language = {de} } @article{HimmelstossVotzi, author = {Himmelstoß, Felix and Votzi, Helmut}, title = {Feedforward Control of Quadratic Converters}, series = {WSEAS Transactions of Circuits and Systems}, volume = {20}, journal = {WSEAS Transactions of Circuits and Systems}, number = {2021}, pages = {147 -- 155}, subject = {DC/DC converters}, language = {en} } @article{RisserBell, author = {Risser, Ralf and Bell, Daniel}, title = {TECHNOLOGICAL SUPPORT TO PROVISION OF INCLUSIVENESS OF TRANSPORT SYSTEMS}, series = {JNHA, Journal of Nutrition, Health \& Ageing}, volume = {2013}, journal = {JNHA, Journal of Nutrition, Health \& Ageing}, number = {Volume 17}, pages = {126 -- 127}, subject = {Mobility}, language = {en} } @misc{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Peharz, Gerhard and Rechberger, P. and Aichinger, Martin and Moor, D.}, title = {Ringversuch von baugleichen Glas-Glas-BIPV-Elementen unter verschiedenen Klimabedingungen - ein Beitrag {\"O}sterreichs zu IEA PVPS Task 15: „Beschleunigung der Marktdurchdringung von BIPV"}, subject = {Photovoltaics}, language = {de} } @inproceedings{LeonhartsbergerMeiselPicleretal., author = {Leonhartsberger, Kurt and Meisel, M. and Picler, M. and Schidler, Susanne and Fotiadis, Lampros and Xypolytou, E. and Werner, Andrea}, title = {System relevant Applications for Battery Storage Systems}, series = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, booktitle = {33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III}, subject = {Battery Storage Systems}, language = {en} } @techreport{BiermayrDissauerEberletal., author = {Biermayr, Peter and Dißauer, Christa and Eberl, Manuela and Enigl, Monika and Fechner, Hubert and Fischer, L. and Leonhartsberger, Kurt and Maringer, F. and Moidl, S. and Schmidl, C. and Strasser, C. and Weiss, W. and Wonisch, P. and Wopienka, E.}, title = {Innovative Energietechnologien in {\"O}sterreich - Marktentwicklung 2018}, series = {BMVIT Schriftenreihe 04/2018}, journal = {BMVIT Schriftenreihe 04/2018}, subject = {Energy Technology}, language = {de} } @article{HerbstPrinzKrampeetal., author = {Herbst, Stefan and Prinz, Thomas and Krampe, Stefan and Huber, Judith and Hiess, Helmut and Bell, Daniel}, title = {MobilityEqualizer - Planungswerkzeug f{\"u}r nachfrageorientierte Mobilit{\"a}tsmaßnahmen im {\"O}V}, series = {AGIT - Journal f{\"u}r Angewandte Geoinformatik}, volume = {2015}, journal = {AGIT - Journal f{\"u}r Angewandte Geoinformatik}, number = {1}, pages = {169 -- 174}, subject = {Mobility}, language = {de} } @inproceedings{IllichEderBergeretal., author = {Illich, Peter and Eder, Gabriele C. and Berger, Karl A. and Ujv{\´a}ri, Guszt{\´a}v and Rechberger, P. and Moor, D. and Aichinger, Martin}, title = {Comparative Performance Measurements of Identical BIPV-Elements in Different Climatic Environments - A Round Robin Action within the IEA PVPS Task 15 Collaboration}, series = {35th European Photovoltaic Solar Energy Conference and Exhibition}, booktitle = {35th European Photovoltaic Solar Energy Conference and Exhibition}, isbn = {3-936338-50-7}, subject = {Photovoltaics}, language = {en} } @inproceedings{RisserBell, author = {Risser, Ralf and Bell, Daniel}, title = {Mobility Behaviour and Mobility Needs of older People. Ageing Clinical and Experimental Reserach, Official Journal of the Italian Society of Gerontology and Geriatrics}, series = {VII European Congress - Healthy and Active Ageing for all Europeans - II}, booktitle = {VII European Congress - Healthy and Active Ageing for all Europeans - II}, pages = {147}, subject = {Mobility}, language = {en} } @inproceedings{HimmelstossVotzi, author = {Himmelstoß, Felix and Votzi, Helmut}, title = {Converters to drive two brushed DC machines}, series = {2021 IEEE 15th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 14-16 July 2021, Florence, Italy}, booktitle = {2021 IEEE 15th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 14-16 July 2021, Florence, Italy}, pages = {8}, subject = {DC converters}, language = {en} } @inproceedings{HimmelstossPoepperl, author = {Himmelstoß, Felix and Poepperl, Florian}, title = {Inverting Zero-Current-Switching Buck Converter}, series = {2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC), 26.-29. April 2021, Glivice, Poland}, booktitle = {2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC), 26.-29. April 2021, Glivice, Poland}, pages = {108 -- 113}, subject = {DC/DC converter}, language = {en} } @article{ZhangYaoMaetal., author = {Zhang, Hang and Yao, Yuan and Ma, Yingxin and Lackner, Maximilian and Jiang, Yunliang}, title = {A 3D printing tool-path generation strategy based on the partition of principal stress field for fused filament fabrication}, series = {The International Journal of Advanced Manufacturing Technology}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {122}, pages = {1719 -- 1735}, abstract = {In order to enhance the strength of 3D-printed parts made of polymer materials and reduce the anisotropy caused by the fused filament fabrication process, this paper proposes an inter-layer interleaved composite path planning method based on the directional partition of the principal stress field. This method not only ensures intra-layer reinforcement under specific working conditions but also increases the strength of the printed part by enhancing the adhesion of adjacent layers through staggered filling between layers. The mechanical performance is improved by 10 to 30\% compared to other conventional filling patterns such as the zigzag filling algorithm. Inter-layer interleaved composite enhancement path planning method is suitable for path planning of structures with complex shapes and is easily integrated into existing general computer-aided engineering processes.}, subject = {Principal stress field}, language = {en} } @article{WoeberCurtoTibihikaetal., author = {W{\"o}ber, Wilfried and Curto, Manuel and Tibihika, Papius D. and Meulenboek, Paul and Alemayehu, Esayas and Mehnen, Lars and Meimberg, Harald and Sykacek, Peter}, title = {Identifying geographically differentiated features of Ethopian Nile tilapia (Oreochromis niloticus) morphology with machine learning}, series = {PlosONE}, volume = {16}, journal = {PlosONE}, number = {4}, subject = {Machine Learning}, language = {en} } @inproceedings{WoeberTibihikaOlaverriMonrealetal., author = {W{\"o}ber, Wilfried and Tibihika, Papius D and Olaverri-Monreal, Cristina and Mehnen, Lars and Sykacek, Peter and Meimberg, Harald}, title = {Comparison of Unsupervised Learning Methods for Natural Image Processing}, series = {Biodiversity Information Science and Standards}, booktitle = {Biodiversity Information Science and Standards}, number = {3}, subject = {Machine Learning}, language = {en} } @article{HimmelstossEdelmoser, author = {Himmelstoß, Felix and Edelmoser, Karl}, title = {Modified Fourth-Order Buck-Boost Converter}, series = {WSEAS Transactions of Circuits and Systems}, journal = {WSEAS Transactions of Circuits and Systems}, pages = {33 -- 40}, subject = {buck-boost converter}, language = {en} } @inproceedings{MorrisHancoxMartinetal., author = {Morris, A. and Hancox, Graham and Martin, O. and Bell, Daniel and Johansson, C. and Rosander, P. and Scholliers, J. and Silla, A.}, title = {Critical accident scenarios for cyclists and how they can be addressed through ITS solutions}, series = {International Cycling Safety Conference 2013. Helmond, The Netherlands}, booktitle = {International Cycling Safety Conference 2013. Helmond, The Netherlands}, pages = {11}, subject = {Safety}, language = {en} } @inproceedings{HimmelstossEdelmoser, author = {Himmelstoß, Felix and Edelmoser, Karl}, title = {Modified Basic Converters in the Discontinuous Mode}, series = {2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC), 26.-29. April 2021, Glivice, Poland}, booktitle = {2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC), 26.-29. April 2021, Glivice, Poland}, pages = {118 -- 123}, subject = {buck-boost converter}, language = {en} } @article{HimmelstossVotzi, author = {Himmelstoß, Felix and Votzi, Helmut}, title = {Converter for the Drive of two Brushed DC motors}, series = {WSEAS Transactions of Circuits and Systems}, volume = {15}, journal = {WSEAS Transactions of Circuits and Systems}, number = {2020}, pages = {249 -- 256}, subject = {brushed DC machine}, language = {en} } @article{SillaLedenRaemaeetal., author = {Silla, Anne and Leden, Lars and R{\"a}m{\"a}, Pirkko and Scholliers, Johan and van Noort, Martijn and Morris, Andrew and Hancox, Graham and Bell, Daniel}, title = {A headway to improve PTW rider safety within the EU through three types of ITS}, series = {European Transport Research Review}, journal = {European Transport Research Review}, pages = {1 -- 12}, subject = {Transport}, language = {en} } @article{OlaverriMonrealHasanBulutetal., author = {Olaverri-Monreal, Cristina and Hasan, Amilia and Bulut, Jonathan and Korber, Moritz and Bengler, Klaus}, title = {Impact of In-Vehicle Displays Location Preferences on Drivers' Performance and Gaze}, series = {IEEE Transaction on Intelligent Transportation Systems}, volume = {15}, journal = {IEEE Transaction on Intelligent Transportation Systems}, number = {4}, pages = {1770 -- 1780}, subject = {Autonomous Driving}, language = {en} } @article{MaloneSillaJohanssenetal., author = {Malone, Kerry and Silla, Anne and Johanssen, Charlotta and Bell, Daniel}, title = {Safety, mobility and comfort assessment methodologies of intelligent transport systems for vulnerable road users}, series = {European Transport Research Review}, journal = {European Transport Research Review}, subject = {Transport}, language = {en} } @article{HimmelstossEdelmoser, author = {Himmelstoß, Felix and Edelmoser, Karl}, title = {Modified Buck-Boost Converter as DC Motor Driver with Continuous Input Current}, series = {WSEAS Transactions of Circuits and Systems}, volume = {2020}, journal = {WSEAS Transactions of Circuits and Systems}, number = {19}, pages = {186 -- 194}, subject = {DC/DC converter}, language = {en} } @inproceedings{HerbstBellZalavarietal., author = {Herbst, Stefan and Bell, Daniel and Zalavari, P. and Spitzer, Wolfgang and Chaloupka-Risser, Christine and Krampe, Stefan and Prinz, Thomas}, title = {FACTS4Stops - Informationsdienste zur bedarfsgerechten Anbindung von {\"O}V-Haltestelle und Umgebungsinfrastruktur}, series = {AGIT 2014 - Symposium und Fachmesse Angewandte Geoinformatik}, booktitle = {AGIT 2014 - Symposium und Fachmesse Angewandte Geoinformatik}, subject = {Mobility}, language = {de} } @inproceedings{LinkBellJonuschatetal., author = {Link, C. and Bell, Daniel and Jonuschat, H. and Nagel, I.}, title = {Mobil mit Wearable Devices. M{\"o}glichkeiten zur Beeinflussung des Mobilit{\"a}tsverhaltens}, series = {18. {\"O}sterreichischen Klimatag. Wien}, booktitle = {18. {\"O}sterreichischen Klimatag. Wien}, subject = {Mobility}, language = {en} } @inproceedings{JohanssonBell, author = {Johansson, C. and Bell, Daniel}, title = {Mobility and Comfort of Vulnerable Road Users - Impact Assessment of ITS}, series = {22nd ITS World Congress, Bordeaux, France}, booktitle = {22nd ITS World Congress, Bordeaux, France}, subject = {Mobility}, language = {en} } @incollection{RehrlHaeuslerSteinmannetal., author = {Rehrl, Karl and H{\"a}usler, Elisabeth and Steinmann, Renate and Leininter, Sven and Bell, Daniel and Weber, Michael}, title = {Pedestrian Navigation with Augmented Reality, Voice and Digital Map: Results from a Field Study assessing Performance and User Experience}, series = {Lecture Notes in Cartography and Geoinformation. Special volume}, booktitle = {Lecture Notes in Cartography and Geoinformation. Special volume}, publisher = {Fachhochschule Technikum Wien}, abstract = {This paper reports on a field study comparing the interface technologies voice, digital map, and augmented reality in the context of pedestrian navigation. The in situ study was conducted in the city of Salzburg using a self-implemented smartphone application running on Apple's iPhone 4. The study involved 24 participants between 22 and 66 years with different experiences in using smartphones and navigation systems. Results show that in the context of GPS-enhanced pedestrian navigation digital map and voice-only interfaces lead to significantly better navigation performance and user experience in comparison to an augmented reality interface. The study also reveals similar results for digital map and voice-only interfaces given that voice instructions are carefully composed.}, subject = {Mobility}, language = {en} } @incollection{HerbstPrinzZalavarietal., author = {Herbst, Stefan and Prinz, Thomas and Zalavari, Peter and Bell, Daniel and Spitzer, Wolfgang and Chaloupka-Risser, Christine and Krampe, Stefan}, title = {Informationsdienste zur bedarfsgerechten Anbindung von {\"O}V-Haltestelle und Umgebungsinfrastruktur}, series = {Angewandte Geoinformatik 2014}, booktitle = {Angewandte Geoinformatik 2014}, publisher = {Wichmann Verlag}, address = {Berlin}, publisher = {Fachhochschule Technikum Wien}, pages = {648 -- 657}, subject = {Transport}, language = {de} } @incollection{NelkeSachseThueringetal., author = {Nelke, Tobias and Sachse, Katharina and Th{\"u}ring, Manfred and Olaverri-Monreal, Cristina and Dlugosch, Carsten and Bengler, Klaus}, title = {An Approach to the Efficient Assessment of Safety and Usability of Computer-Based Control Systems (VeNuS 2)}, series = {7th meeting in the series of Enlarged Halden Program Group meetings}, booktitle = {7th meeting in the series of Enlarged Halden Program Group meetings}, publisher = {Fachhochschule Technikum Wien}, subject = {Safety}, language = {en} } @article{SattingerPapaStujaetal., author = {Sattinger, Vinzenz and Papa, Maximilian and Stuja, Kemajl and Kubinger, Wilfried}, title = {Methodik zur Entwicklung sicherer kollaborativer Produktionssysteme im Rahmen von Industrie 4.0}, series = {e \& i Elektrotechnik und Informationstechnik}, journal = {e \& i Elektrotechnik und Informationstechnik}, subject = {Robotics}, language = {de} } @article{OlaverriMonrealHasanBengler, author = {Olaverri-Monreal, Cristina and Hasan, Ahmed and Bengler, Klaus}, title = {Intelligent Agent (IA) Systems to Generate User Stories for a Positive User Experience}, series = {International Journal of Human Capital and Information TEchnology Professionals (IJHCITP)}, volume = {5}, journal = {International Journal of Human Capital and Information TEchnology Professionals (IJHCITP)}, number = {1}, pages = {26 -- 40}, subject = {User Experience}, language = {en} } @article{HelmbrechtOlaverriMonrealBengleretal., author = {Helmbrecht, Magnus and Olaverri-Monreal, Cristina and Bengler, Klaus and Vilimek, Roman and Keinath, Andreas}, title = {How electric vehicles affect driving behavioral patterns}, series = {IEEE Intelligent Transportation Systems Magazine}, volume = {6}, journal = {IEEE Intelligent Transportation Systems Magazine}, number = {3}, pages = {22 -- 32}, subject = {Autonomous Driving}, language = {en} } @article{SillaLedenRaemaeetal., author = {Silla, Anne and Leden, Lars and R{\"a}m{\"a}, Pirkko and Scholliers, Johan and van Noort, Martijn and Bell, Daniel}, title = {Can cyclist safety be improved with intelligent transport systems?}, series = {Accident Analysis \& Prevention}, journal = {Accident Analysis \& Prevention}, number = {Volume 105}, abstract = {Abstract In recent years, Intelligent Transport Systems (ITS) have assisted in the decrease of road traffic fatalities, particularly amongst passenger car occupants. Vulnerable Road Users (VRUs) such as pedestrians, cyclists, moped riders and motorcyclists, however, have not been that much in focus when developing ITS. Therefore, there is a clear need for ITS which specifically address VRUs as an integrated element of the traffic system. This paper presents the results of a quantitative safety impact assessment of five systems that were estimated to have high potential to improve the safety of cyclists, namely: Blind Spot Detection (BSD), Bicycle to Vehicle communication (B2V), Intersection safety (INS), Pedestrian and Cyclist Detection System+Emergency Braking (PCDS+EBR) and VRU Beacon System (VBS). An ex-ante assessment method proposed by Kulmala (2010) targeted to assess the effects of ITS for cars was applied and further developed in this study to assess the safety impacts of ITS specifically designed for VRUs. The main results of the assessment showed that all investigated systems affect cyclist safety in a positive way by preventing fatalities and injuries. The estimates considering 2012 accident data and full penetration showed that the highest effects could be obtained by the implementation of PCDS+EBR and B2V, whereas VBS had the lowest effect. The estimated yearly reduction in cyclist fatalities in the EU-28 varied between 77 and 286 per system. A forecast for 2030, taking into accounts the estimated accident trends and penetration rates, showed the highest effects for PCDS+EBR and BSD.}, subject = {Safety}, language = {en} } @article{HeimelSwiadekSlezaketal., author = {Heimel, Patrick and Swiadek, Nicole V. and Slezak, Paul and Kerbl, Markus and Schneider, Cornelia and N{\"u}rnberger, Sylvia and Redl, Heinz and Teuschl, Andreas and Hercher, David}, title = {Iodine-Enhanced Micro-CT Imaging of Soft Tissue on the Example of Peripheral Nerve Regeneration}, series = {Contrast Media \& Molecular Imaging}, journal = {Contrast Media \& Molecular Imaging}, subject = {µCT}, language = {en} } @article{SillaRaemaeLedenetal., author = {Silla, Anne and R{\"a}m{\"a}, Pirkko and Leden, Lars and van Noort, Martijn and de Kruijff, J. and Bell, Daniel and Morris, A. and Hancox, Graham and Scholliers, J.}, title = {Quantifying the effectiveness of ITS in improving safety of VRUs'}, series = {IET Intelligent Transport Systems}, journal = {IET Intelligent Transport Systems}, pages = {1 -- 25}, subject = {Transport}, language = {en} } @article{BellSumper, author = {Bell, Daniel and Sumper, Elke}, title = {The Public Transport Stop as an Access Point for Equal Mobility in Rural Areas}, series = {SWS-Rundschau}, volume = {55. Jg}, journal = {SWS-Rundschau}, number = {3/2015}, pages = {355 -- 374}, subject = {Transport}, language = {de} } @article{RisserBell, author = {Risser, Ralf and Bell, Daniel}, title = {Junge Autofahrer in ArRiyadh}, series = {Zeitschrift f{\"u}r Verkehrssicherheit}, journal = {Zeitschrift f{\"u}r Verkehrssicherheit}, number = {59}, pages = {107}, subject = {Mobility}, language = {de} } @inproceedings{RisserBell, author = {Risser, Ralf and Bell, Daniel}, title = {Fitness to drive and mobility behaviour among senior road users. Fit to Drive}, series = {5th International Traffic Expert Congress, Proceedings. Schriftenreihe Fahreignung}, booktitle = {5th International Traffic Expert Congress, Proceedings. Schriftenreihe Fahreignung}, editor = {Divera, Twisk and Nickel, Wolf-R{\"u}diger}, publisher = {Kirschbaum Verlag}, address = {Bonn}, subject = {Mobility}, language = {en} } @inproceedings{CapalarOlaverriMonreal, author = {Capalar, Jusuf and Olaverri-Monreal, Cristina}, title = {Hypovigilance in Limited Self-Driving Automation: Peripheral Visual Stimulus for a Balanced Level of Automation and Cognitive Workload}, series = {Proceedings of the IEEE Intelligent Transportation Systems Conference}, booktitle = {Proceedings of the IEEE Intelligent Transportation Systems Conference}, pages = {14 -- 18}, subject = {Autonomous Driving}, language = {en} } @misc{CapalarOlaverriMonreal, author = {Capalar, Jusuf and Olaverri-Monreal, Cristina}, title = {Hypovigilance in Limited Self-Driving Automation: Peripheral Visual Stimulus for a Balanced Level of Automation and Cognitive Workload}, subject = {Hypovigilance}, language = {en} } @article{YalcinHimmelstoss, author = {Yalcin, Faruk and Himmelstoß, Felix}, title = {Buck-type Single-phase AC-AC Active Tracking Voltage Regulator Controlled by an Enhanced Hybrid Control Method}, series = {Sakarya University Journal of Science}, volume = {2021}, journal = {Sakarya University Journal of Science}, number = {25}, pages = {926 -- 937}, subject = {AC-AC regulator}, language = {en} } @inproceedings{HauptBellLink, author = {Haupt, J. and Bell, Daniel and Link, C.}, title = {Wearable devices: needs, barriers and desires oft he future Viennese intermodal traveller - a qualitative study}, series = {Humanist 5th Conference on Human Centred Design for Intelligent Transport Systems. Loughborough, UK}, booktitle = {Humanist 5th Conference on Human Centred Design for Intelligent Transport Systems. Loughborough, UK}, subject = {Mobility}, language = {en} } @inproceedings{ScholliersBellMorrisetal., author = {Scholliers, J. and Bell, Daniel and Morris, A. and Garc{\´i}a, A.B.}, title = {Improving safety and mobility of Vulnerable Road Users through ITS applications}, series = {Transport Research Arena 2014, Paris}, booktitle = {Transport Research Arena 2014, Paris}, subject = {Mobility}, language = {en} } @article{KrieberneggBell, author = {Kriebernegg, G. and Bell, Daniel}, title = {TrafficCheck.at. Planen Sie Ihre Ampel!}, series = {Zoll+ - {\"O}sterreichische Schriftenreihe f{\"u}r Landschaft und Freiraum}, volume = {23}, journal = {Zoll+ - {\"O}sterreichische Schriftenreihe f{\"u}r Landschaft und Freiraum}, number = {22}, subject = {Mobility}, language = {de} } @article{WoeberMehnenSykaceketal., author = {W{\"o}ber, Wilfried and Mehnen, Lars and Sykacek, Peter and Meimberg, Harald}, title = {Investigating Explanatory Factors of Machine Learning Models for Plant Classification}, series = {Plants}, volume = {2021}, journal = {Plants}, number = {10(12):2674}, pages = {20}, abstract = {Recent progress in machine learning and deep learning has enabled the implementation of plant and crop detection using systematic inspection of the leaf shapes and other morphological characters for identification systems for precision farming. However, the models used for this approach tend to become black-box models, in the sense that it is difficult to trace characters that are the base for the classification. The interpretability is therefore limited and the explanatory factors may not be based on reasonable visible characters. We investigate the explanatory factors of recent machine learning and deep learning models for plant classification tasks. Based on a Daucus carota and a Beta vulgaris image data set, we implement plant classification models and compare those models by their predictive performance as well as explainability. For comparison we implemented a feed forward convolutional neuronal network as a default model. To evaluate the performance, we trained an unsupervised Bayesian Gaussian process latent variable model as well as a convolutional autoencoder for feature extraction and rely on a support vector machine for classification. The explanatory factors of all models were extracted and analyzed. The experiments show, that feed forward convolutional neuronal networks (98.24\% and 96.10\% mean accuracy) outperforms the Bayesian Gaussian process latent variable pipeline (92.08\% and 94.31\% mean accuracy) as well as the convolutional autoenceoder pipeline (92.38\% and 93.28\% mean accuracy) based approaches in terms of classification accuracy, even though not significant for Beta vulgaris images. Additionally, we found that the neuronal network used biological uninterpretable image regions for the plant classification task. In contrast to that, the unsupervised learning models rely on explainable visual characters. We conclude that supervised convolutional neuronal networks must be used carefully to ensure biological interpretability. We recommend unsupervised machine learning, careful feature investigation, and statistical feature analysis for biological applications. View Full-Text Keywords: deep learning; machine learning; plant leaf morphometrics; explainable AI}, subject = {deep learning}, language = {en} } @article{RisserManssonLexellBelletal., author = {Risser, Ralf and Mansson Lexell, Eva and Bell, Daniel and Iwarsson, Susanne and St{\aa}hl, A.}, title = {Use of local public transport among people with cognitive impairments - A literature review}, series = {Transportation Research Part F Traffic Psychology and Behaviour}, journal = {Transportation Research Part F Traffic Psychology and Behaviour}, number = {29}, abstract = {Being able to move around in the community including using different modes of transport is a prerequisite for being able to participate in activities outside home. This can be particular challenging for people with cognitive impairments. Still, research regarding public transport for people with cognitive impairments is scarce. In this narrative review scientific literature focusing on people with cognitive impairments and their needs in public transport, was identified and summarised. All aspects in the travel chain perspective were of interest. Literature search engines Scirus, Elin and Cinahl were used during the search. Thirty-four articles were included and analysed according to which part of the travel chain they covered in the used model. The results showed that the articles were unevenly allocated to the different parts of the model. Future studies based on real-world experiences are essential, and more user-centred approaches should be adopted. Moreover, there is a need for the development and evaluation of evidence-based rehabilitation. Finally, more research is needed to foster societal awareness of the problems and needs in the public transport of people with cognitive impairments taking the whole travel chain into consideration.}, subject = {Transport}, language = {en} } @article{Bell, author = {Bell, Daniel}, title = {Vulnerable Road User needs towards ITS.}, series = {Transactions on Transport Sciences}, volume = {2017}, journal = {Transactions on Transport Sciences}, number = {Volume 8}, abstract = {Due to fast development of new technologies in the field of Intelligent Transport Systems (ITS) a number of new research topics arise, especially in view of vulnerable road users (VRUs). As most developments in the ITS sector are primarily targeting motorised transport with focus on safety and ecological aspects of transport, there is still a lack of both research and development considering VRUs not only as passive element. The VRUITS project, funded by the EC, aims at actively integrating the "human" element into the ITS approach.}, subject = {Transport}, language = {en} } @inproceedings{Bell, author = {Bell, Daniel}, title = {An overview of the CONSOL programme, drawing together European researchers to provide a platform for research and innovation in road safety in ageing societies}, series = {CARDI Conference: Ageing Globally - Ageing Locally. Symposia Abstracts}, booktitle = {CARDI Conference: Ageing Globally - Ageing Locally. Symposia Abstracts}, subject = {Mobility}, language = {en} } @inproceedings{Bell, author = {Bell, Daniel}, title = {Problems and barriers to urban infrastructure and public transportation for people with mobility impairments: higher education and technological innovation as basis for improvement}, series = {ICTTP2012; The 5th International Conference on Traffic and Transport Psychology}, booktitle = {ICTTP2012; The 5th International Conference on Traffic and Transport Psychology}, subject = {Transport}, language = {en} } @inproceedings{FibichHorauerObermaisser, author = {Fibich, Christian and Horauer, Martin and Obermaisser, Roman}, title = {Bitstream-Level Interconnect Fault Characterization for SRAM-based FPGAs}, series = {Proceedings of the 2023 Design, Automation \& Test in Europe Conference \& Exhibition (DATE 2023), pp. 1-2, 16-18 April 2023, Antwerp, Belgium}, booktitle = {Proceedings of the 2023 Design, Automation \& Test in Europe Conference \& Exhibition (DATE 2023), pp. 1-2, 16-18 April 2023, Antwerp, Belgium}, doi = {10.23919/DATE56975.2023.10136911}, pages = {2}, subject = {FPGA}, language = {en} } @inproceedings{AngelOrsolitsGarcia, author = {Angel, Nikolaus and Orsolits, Horst and Garcia, Jose}, title = {Developing an AR Based Tool for Teaching Motion Analysis on Assembly Tasks}, series = {2022 8th International Conference of the Immersive Learning Research Network (iLRN), 2022}, booktitle = {2022 8th International Conference of the Immersive Learning Research Network (iLRN), 2022}, isbn = {978-1-7348-9952-8}, doi = {10.23919/iLRN55037.2022.9815914}, pages = {7}, abstract = {Engineering education courses look into processes, equipment and people in order to prepare students to tackle problems in their careers. In manufacturing industry, it is important to use virtual manufacturing tools to analyse processes. This includes both equipment and people. Assembly operations can involve human operators. Modular arrangements of predetermined time standards MODAPTS is a predetermined motion time system method used to analyse assembly processes. Augmented reality (AR) is increasingly being used for industrial processes as well as in education. AR application have been used for maintenance training as a useful way to overly digital instructions to a trainee whilst being able to look at a real object. This is potential beneficial for education. This paper presents the evaluation of a prototype to test a predetermined time standards model using an AR application. An evaluation was carried out comparing AR-based instructions in tablet and PC monitor and paper-written instructions. The results of evaluating the prototype encourage their use as an educational tool in engineering courses.}, subject = {Augmented Reality}, language = {en} } @inproceedings{JankWagnerUrbaueretal., author = {Jank, Miran and Wagner, Fabian and Urbauer, Philipp and Balz, Andrea and Forjan, Mathias}, title = {Extended Reality Solutions in Medical Context and Educational Approaches}, series = {Healthcare Transformation with Informatics and Artificial Intelligence / 21th International Conference on Informatics, Management and Technology in Healthcare}, booktitle = {Healthcare Transformation with Informatics and Artificial Intelligence / 21th International Conference on Informatics, Management and Technology in Healthcare}, publisher = {iOS Press}, doi = {10.3233/SHTI230548}, pages = {521 -- 524}, abstract = {The healthcare sector is growing in importance as people continue to age and pandemics complicate the boundary conditions of such systems. The number of innovative approaches to solve singular tasks and problems in this area is only slowly increasing. This is particularly evident when looking at medical technology planning, medical training and process simulation. In this paper a concept for versatile digital improvements to these problems by using state of the art development methods of Virtual Reality (VR) and Augmented Reality (AR) are presented. The programming and design of the software is done with the help of Unity Engine, which provides an open interface for docking with the developed framework for future work. The solutions were tested under domain specific environments and have shown good results and positive feedback.}, subject = {Virtual Reality}, language = {en} }