@book{SchmidWagner,
  author    = {Schmid, Judith and Wagner, Daniela},
  title     = {Unternehmerische Grundhaltung im Design Thinking - Eine Chance f{\"u}r den Tourismus?},
  publisher = {Springer},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Design},
  language  = {de}
}
@article{Urbauer,
  author    = {Urbauer, Philipp},
  title     = {The Social Platform: Profiling FHIR to Support Community-Dwelling Older Adults},
  series = {Journal of Medical Systems},
  volume    = {4},
  journal   = {Journal of Medical Systems},
  number    = {43},
  subject      = {Elderly People},
  language  = {en}
}
@inproceedings{DolezalPohnLegensteinetal.,
  author    = {Dolezal, Dominik and Pohn, Birgit and Legenstein, Michael and Polanz, Jacob and Schuh, Roman},
  title     = {System Engineering and Prototypical Setup of an Integrated Laboratory Data Platform in the Field of eHealth},
  series = {23rd International Conference Information Visualisation (IV)},
  booktitle = {23rd International Conference Information Visualisation (IV)},
  subject      = {eHealth},
  language  = {en}
}
@article{KialkaSticklerHornbergeretal.,
  author    = {Kialka, Filip and Stickler, Benjamin and Hornberger, Klaus and Fein, Yaakov and Geyer, Philipp and Mairhofer, Lukas and Gerlich, Stefan and Arndt, Markus},
  title     = {Concepts for long-baseline, high-mass matter-wave interferometry},
  series = {Physica Scripta},
  journal   = {Physica Scripta},
  number    = {94, 2019},
  abstract  = {Designing experiments which delocalize ever more complex and more massive particles requires a quantitative assessment of new interferometer configurations. Here, we introduce a figure of merit which quantifies the difference between a genuine quantum interference pattern and a classical shadow and use it to compare a number of near-field interferometer schemes. This allows us to identify the most promising setups for future tests of the quantum superposition principle, and to discuss the perspectives of interferometry with complex molecules and clusters.},
  subject      = {Matter wave optics},
  language  = {en}
}
@article{KubaPanholzer,
  author    = {Kuba, Markus and Panholzer, Alois},
  title     = {A Note on Harmonic number identities, Stirling series and multiple zeta values},
  series = {International Journal of Number Theory},
  volume    = {15},
  journal   = {International Journal of Number Theory},
  number    = {07},
  pages     = {1323 -- 1348},
  subject      = {Multiple zeta values},
  language  = {en}
}
@article{KubaPanholzer,
  author    = {Kuba, Markus and Panholzer, Alois},
  title     = {Stirling permutations containing a single pattern of length three},
  series = {The Australasian Journal of Combinatorics},
  volume    = {74},
  journal   = {The Australasian Journal of Combinatorics},
  number    = {2},
  pages     = {216 -- 239},
  subject      = {Stirling permutations},
  language  = {en}
}
@inproceedings{DolezalPosekanyKoppensteineretal.,
  author    = {Dolezal, Dominik and Posekany, Alexandra and Koppensteiner, Gottfried and Vittori, Lisa},
  title     = {We can learn ourselves - Developing digital media for Student-Centered Learning},
  series = {22th International Conference on Interactive},
  booktitle = {22th International Conference on Interactive},
  subject      = {learning office},
  language  = {en}
}
@article{QuartinelloTallianAueretal.,
  author    = {Quartinello, Felice and Tallian, Claudia and Auer, Julia and Sch{\"o}n, Herta and Vielnascher, Robert and Weinberger, Simone and Wieland, Karin and Weihs, Anna and Rollett, Alexandra and Lendl, Bernhard and Teuschl, Andreas and Pellis, Alessandro and G{\"u}bitz, Georg},
  title     = {Smart Textiles in Wound Care: Functionalization of Cotton/PET Blends with Antimicrobial Nanocapsules},
  series = {Journal of Materials Chemistry B},
  journal   = {Journal of Materials Chemistry B},
  subject      = {Smart textiles},
  language  = {en}
}
@article{FeichtingerMonforteKeibletal.,
  author    = {Feichtinger, Xaver and Monforte, Xavier and Keibl, Claudia and Hercher, David and Schanda, Jakob and Teuschl, Andreas and Muschitz, Christian and Redl, Heinz and Fialka, Christian and Mittermayr, Rainer},
  title     = {Substantial Biomechanical Improvement by Extracorporeal Shockwave Therapy After Surgical Repair of Rodent Chronic Rotator Cuff Tears.},
  series = {American Journal of Sports Medicine},
  journal   = {American Journal of Sports Medicine},
  subject      = {Shockwave Therapy},
  language  = {en}
}
@article{TeuschlTanglHeimeletal.,
  author    = {Teuschl, Andreas and Tangl, Stefan and Heimel, Patrick and Schwarze, Uwe Yacine and Monforte, Xavier and Redl, Heinz and Nau, Thomas},
  title     = {Osteointegration of a Novel Silk Fiber-Based ACL Scaffold by Formation of a Ligament-Bone Interface.},
  series = {American Journal of Sports Medicine},
  journal   = {American Journal of Sports Medicine},
  subject      = {Tissue Engineering},
  language  = {en}
}
@article{SimsaMonforteSalzeretal.,
  author    = {Simsa, Robin and Monforte, Xavier and Salzer, Elias and Teuschl, Andreas and Jenndahl, Lachmi and Bergh, Niklas and Fogelstrand, Per},
  title     = {Effect of fluid dynamics on decellularization efficacy and mechanical properties of blood vessels.},
  series = {PLoS One},
  journal   = {PLoS One},
  subject      = {Tissue Engineering},
  language  = {en}
}
@inproceedings{RoesslerHoellerReisneretal.,
  author    = {R{\"o}ssler, Peter and H{\"o}ller, Roland and Reisner, Christopher and Maischberger, Oliver},
  title     = {Survey and Comparison of Digital Logic Simulators},
  series = {Proceedings of 27th Austrochip Conference on Microelectronics, Oct. 24, 2019, Vienna, Austria},
  booktitle = {Proceedings of 27th Austrochip Conference on Microelectronics, Oct. 24, 2019, Vienna, Austria},
  pages     = {5},
  subject      = {Digital Logic Simulation},
  language  = {en}
}
@inproceedings{HoellerHaselbergerBalleketal.,
  author    = {H{\"o}ller, Roland and Haselberger, Dominic and Ballek, Dominik and R{\"o}ssler, Peter},
  title     = {Open-Source RISC-V Processor IP Cores for FPGAs - Overview and Evaluation},
  series = {8th Mediterranean Conference on Embedded Computing (MECO), co-sponsored by IEEE, June 10-14, 2019, Budva, Montenegro},
  booktitle = {8th Mediterranean Conference on Embedded Computing (MECO), co-sponsored by IEEE, June 10-14, 2019, Budva, Montenegro},
  pages     = {6},
  subject      = {Field-Programmable Gate Array},
  language  = {en}
}
@inproceedings{WenzlRoesslerPuhm,
  author    = {Wenzl, Matthias and R{\"o}ssler, Peter and Puhm, Andreas},
  title     = {Checking Application-level Properties Using Assertion Synthesis},
  series = {Proceedings of the ASME/IEEE International Design Engineering Technical Conferences \& Computers and Information in Engineering Conference, August 18-21, 2019, Anaheim, CA, USA},
  booktitle = {Proceedings of the ASME/IEEE International Design Engineering Technical Conferences \& Computers and Information in Engineering Conference, August 18-21, 2019, Anaheim, CA, USA},
  pages     = {9},
  subject      = {Assertion-based Verification},
  language  = {en}
}
@inproceedings{RoesslerHoeller,
  author    = {R{\"o}ssler, Peter and H{\"o}ller, Roland},
  title     = {Innovative Plattformen f{\"u}r Elektronische Systeme (INES)},
  series = {Proceedings of the FFH (Forschungsforum der {\"O}stereichischen Fachhochschulen), April 24-25, 2019, Wiener Neustadt, Austria},
  booktitle = {Proceedings of the FFH (Forschungsforum der {\"O}stereichischen Fachhochschulen), April 24-25, 2019, Wiener Neustadt, Austria},
  pages     = {4},
  subject      = {FPGA},
  language  = {de}
}
@misc{Pucher,
  author    = {Pucher, Robert},
  title     = {PHYSIK UND PARAPSYCHOLOGIE - UN{\"U}BERBR{\"U}CKBARE GEGENS{\"A}TZE, ODER NICHT? K{\"o}nnen parapsychische Ph{\"a}nomene und moderne Wissenschaften koexistieren?},
  subject      = {Parapsychology},
  language  = {de}
}
@article{BernsteinerMiernicki,
  author    = {Bernsteiner, Clemens and Miernicki, Martin},
  title     = {SEPA-Lastschrift und Valutaverh{\"a}ltnis. Zivilrechtliche Fragen von Erstattung und Widerruf},
  series = {BankArchiv - Zeitschrift f{\"u}r das Gesamte Bank- und B{\"o}rsewesen ({\"O}BA)},
  volume    = {19},
  journal   = {BankArchiv - Zeitschrift f{\"u}r das Gesamte Bank- und B{\"o}rsewesen ({\"O}BA)},
  number    = {6},
  pages     = {411 -- 419},
  subject      = {Reimbursement},
  language  = {de}
}
@inproceedings{OtrebskiPospisilEngelhardtNowitzkietal.,
  author    = {Otrebski, Richard and Pospisil, Dominik and Engelhardt-Nowitzki, Corinna and Kryvinska, Natalia and Aburaia, Mohamed},
  title     = {Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling},
  series = {The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada},
  booktitle = {The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada},
  pages     = {7},
  abstract  = {Cyberphysical production systems are an important part of today's manufacturing process. The ever-growing need of highly optimized, i.e. at the same time flexible and e� cient systems, requires the use of not only appropriate machines, but as well a communication framework and data model that is manufacturer independent and scalable. This paper proposes a communicationframework based on OPC UA that employs an agent-based architecture. The proposed system has been implemented and tested in the Digital Factory of the UAS Technikum Wien. It shows promising behavior within distributed manufacturing systems.},
  subject      = {Digital Manufacturing},
  language  = {en}
}
@inproceedings{MarkisPapaKaselautzkeetal.,
  author    = {Markis, Alexandra and Papa, Maximilian and Kaselautzke, David and Rathmair, Michael and Sattinger, Vinzenz and Brandst{\"o}tter, Mathias},
  title     = {Safety of Mobile Robot Systems in Industrial Applications},
  series = {Proceedings of the Joint ARW \& OAGM Workshop 2019},
  booktitle = {Proceedings of the Joint ARW \& OAGM Workshop 2019},
  subject      = {Robotics},
  language  = {en}
}
@incollection{HueblPeppoloniLeonhartsbergeretal.,
  author    = {H{\"u}bl, Stefan and Peppoloni, Mauro and Leonhartsberger, Kurt and Hirschl, Alexander},
  title     = {Assessment of the Impact of a Low-Rise Flat Roofed Building on Ambient Wind Conditions},
  series = {Wind Energy Exploitation in Urban Environment},
  booktitle = {Wind Energy Exploitation in Urban Environment},
  publisher = {Springer},
  address   = {Trento},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Wind Energy},
  language  = {en}
}
@incollection{HirschlPeppoloniLeonhartsberger,
  author    = {Hirschl, Alexander and Peppoloni, Mauro and Leonhartsberger, Kurt},
  title     = {Evaluation of the Causes of Vibration and Oscillation in a Vertical Axis Small Wind Turbine (VASWT) and Its Reduction},
  series = {Wind Energy Exploitation in Urban Environment},
  booktitle = {Wind Energy Exploitation in Urban Environment},
  publisher = {Springer},
  address   = {Trento},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Wind Energy},
  language  = {en}
}
@book{EderMaulIllichetal.,
  author    = {Eder, Gabriele C. and Maul, Lukas and Illich, Peter and Folkerts, Wiep},
  title     = {Report IEA-PVPS T15-05: 2018BIPV research teams \& BIPV R\&D facilities},
  isbn      = {978-3-906042-74-9},
  publisher      = {Fachhochschule Technikum Wien},
  pages     = {95},
  subject      = {Photovoltaics},
  language  = {en}
}
@inproceedings{HirschlStorteckySchidleretal.,
  author    = {Hirschl, Alexander and Stortecky, Sebastian and Schidler, Susanne and Leonhartsberger, Kurt},
  title     = {Umweltbilanz geb{\"a}udemontierter Kleinwindkraftanlagen},
  series = {11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019},
  booktitle = {11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019},
  subject      = {Small Wind Plant},
  language  = {de}
}
@inproceedings{Robert,
  author    = {Robert, Pucher},
  title     = {A NEW APPROACH IN COMPUTER SCIENCE EDUCATION TO ENSURE OPTIMAL EMPLOYABILITY OF GRADUATES AD TO REDUCE DROPOUTS},
  series = {Proceedings of the INTED2019. 13th annual International Technology, Education and Development Conference Valencia (Spain) - 11th, 12th and 13th of March, 2019.},
  booktitle = {Proceedings of the INTED2019. 13th annual International Technology, Education and Development Conference Valencia (Spain) - 11th, 12th and 13th of March, 2019.},
  subject      = {Computer Science},
  language  = {en}
}
@article{WenzlMerzdovnikWeippl,
  author    = {Wenzl, Matthias and Merzdovnik, Georg and Weippl, Edgar},
  title     = {ISaFe - Injecting Security Features into Constrained Embedded Firmware},
  series = {ERCIM News},
  volume    = {2019},
  journal   = {ERCIM News},
  number    = {119 (2019)},
  pages     = {25 -- 26},
  subject      = {Binary rewriting},
  language  = {en}
}
@inproceedings{BillmannWernerHoelleretal.,
  author    = {Billmann, Maurice and Werner, Stefan and H{\"o}ller, Roland and Praus, Friedrich and Puhm, Andreas and Ker{\"o}, Nikolaus},
  title     = {Open-Source Crypto IP Cores for FPGAs - Overview and Evaluation},
  series = {Proceedings of 27th Austrochip Conference on Microelectronics, Oct. 24, 2019, Vienna, Austria},
  booktitle = {Proceedings of 27th Austrochip Conference on Microelectronics, Oct. 24, 2019, Vienna, Austria},
  pages     = {8},
  subject      = {open-source cryptography IP cores},
  language  = {en}
}
@misc{DeinhoferSabicPraus,
  author    = {Deinhofer, Martin and Sabic, Alija and Praus, Friedrich},
  title     = {Unterst{\"u}tzungstechnologien in Smart Homes: kosteng{\"u}nstig \& praxisnah},
  subject      = {Smart Homes},
  language  = {de}
}
@article{KeroePuhmKernenetal.,
  author    = {Ker{\"o}, Nikolaus and Puhm, Andreas and Kernen, Thomas and Mroczkowski, Anton},
  title     = {Performance and Reliability Aspects of Clock Synchronization Techniques for Industrial Automation},
  series = {Proceedings of the IEEE},
  volume    = {Vol. 107},
  journal   = {Proceedings of the IEEE},
  number    = {No. 6},
  pages     = {1011 -- 1026},
  subject      = {Precision Time Protocol},
  language  = {en}
}
@article{KlausAignerVeigl,
  author    = {Klaus, Benjamin and Aigner, Benjamin and Veigl, Christoph},
  title     = {AsTeRICS Grid - a flexible web-based application for Alternative Communication (AAC), environmental and computer control},
  series = {Technology and Disability},
  volume    = {Vol. 31},
  journal   = {Technology and Disability},
  number    = {No. s1},
  pages     = {143 -- 144},
  subject      = {AAC},
  language  = {en}
}
@article{WenzlMerzdovnikUllrichetal.,
  author    = {Wenzl, Matthias and Merzdovnik, Georg and Ullrich, Johann and Weippl, Edgar},
  title     = {From Hack to Elaborate Technique - A Survey on Binary Rewriting},
  series = {ACM Computing Surveys (CSUR)},
  volume    = {Volume 52},
  journal   = {ACM Computing Surveys (CSUR)},
  number    = {Number 3 (2019)},
  pages     = {49:1 -- 49:37},
  subject      = {Binary rewriting},
  language  = {en}
}
@book{PucherSeibertGiller,
  author    = {Pucher, Robert and Seibert-Giller, Verena},
  title     = {UXQCC CPUE - FL Exam Preparation: 111 Exam Practice Questions and Extended Glossary},
  publisher = {UX KnowHow Klosterneuburg},
  address   = {Klosterneuburg},
  isbn      = {978-3-9504772-2-1},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Usability},
  language  = {en}
}
@inproceedings{DolezalPosekanyVittorietal.,
  author    = {Dolezal, Dominik and Posekany, Alexandra and Vittori, Lisa and Koppensteiner, Gottfried and Motschnig, Renate},
  title     = {Fostering 21st Century Skills in Student-Centered Engineering Education at the Secondary School Level: Second Evaluation of The Learning Office},
  series = {2019 IEEE Frontiers in Education Conference (FIE)},
  booktitle = {2019 IEEE Frontiers in Education Conference (FIE)},
  organization    = {IEEE},
  subject      = {learning office},
  language  = {en}
}
@misc{DolezalPosekanySchuller,
  author    = {Dolezal, Dominik and Posekany, Alexander and Schuller, Tamara},
  title     = {Neue Entwicklungen im "Learning Office" (SEK II)},
  subject      = {learning office},
  language  = {de}
}
@book{RobertSeibertGiller,
  author    = {Robert, Pucher and Seibert-Giller, Verena},
  title     = {Usability und User Experience: Pr{\"u}fungsvorbereitung zum Certified Professional for Usability Engineering and User Experience Design},
  publisher = {UX KnowHow Klosterneuburg},
  address   = {Klosterneuburg},
  isbn      = {978-3-9504772-0-7},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Usability},
  language  = {de}
}
@misc{DolezalSchuller,
  author    = {Dolezal, Dominik and Schuller, Tamara},
  title     = {Lernen im Aufbruch: Sch{\"u}ler*innenzentrierter Unterricht im Lernb{\"u}ro},
  subject      = {learning office},
  language  = {de}
}
@inproceedings{Pucher,
  author    = {Pucher, Robert},
  title     = {A CURRICULUM IN SOFTWARE ENGINEERING OPTIMIZED FOR STUDENTS WHO WORK},
  series = {Proceedings of the Seventeenth International Conference on Developing Real-Life Learning Experiences (DRLE 2019), May 30th - 31st , 2019 at King Mongkut's Institute of Technology},
  booktitle = {Proceedings of the Seventeenth International Conference on Developing Real-Life Learning Experiences (DRLE 2019), May 30th - 31st , 2019 at King Mongkut's Institute of Technology},
  subject      = {Computer Science},
  language  = {en}
}
@misc{Pucher,
  author    = {Pucher, Robert},
  title     = {A NEW APPROACH IN COMPUTER SCIENCE EDUCATION TO ENSURE OPTIMAL EMPLOYABILITY OF GRADUATES AD TO REDUCE DROPOUTS},
  subject      = {Computer Science},
  language  = {en}
}
@misc{Pucher,
  author    = {Pucher, Robert},
  title     = {A CURRICULUM IN SOFTWARE ENGINEERING OPTIMIZED FOR STUDENTS WHO WORK},
  subject      = {Computer Science},
  language  = {en}
}
@misc{Pucher,
  author    = {Pucher, Robert},
  title     = {How Real People Use Voice User Interfaces},
  subject      = {User Experience},
  language  = {de}
}
@article{SabbatiniKastner,
  author    = {Sabbatini, Giuliana and Kastner, Johann},
  title     = {Forschung \& Entwicklung an Fachhochschulen in {\"O}sterreich: Leistung und Erfolgsgeschichte trotz herausfordernder Rahmenbedingungen?},
  series = {e \& i Elektrotechnik und Informationstechnik},
  journal   = {e \& i Elektrotechnik und Informationstechnik},
  subject      = {Universities of Applied Sciences},
  language  = {de}
}
@article{Lanickova,
  author    = {Lanickova, Katerina},
  title     = {The use of graded readers in ELT},
  series = {Independence},
  journal   = {Independence},
  number    = {77},
  pages     = {22 -- 24},
  subject      = {English Teaching},
  language  = {en}
}
@book{WalaFroehlich,
  author    = {Wala, Thomas and Fr{\"o}hlich, Dominik},
  title     = {Wissen schaffen f{\"u}r Ingenieure: Der Wegweiser durch deine Masterarbeit},
  publisher = {Amazon Media},
  address   = {Luxemburg},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Teaching},
  language  = {de}
}
@article{Bernsteiner,
  author    = {Bernsteiner, Clemens},
  title     = {Wenn der Nachwuchs viel zu fr{\"u}h kommt: „Papa-Monat" im Ausnahmezustand},
  series = {ecolex},
  volume    = {2019},
  journal   = {ecolex},
  number    = {6},
  pages     = {533 -- 536},
  subject      = {Maternity leave},
  language  = {de}
}
@article{BernsteinerMiernicki,
  author    = {Bernsteiner, Clemens and Miernicki, Martin},
  title     = {SEPA-Lastschrift und Valutaverh{\"a}ltnis - Zivilrechtliche Fragen von Erstattung und Widerruf},
  series = {BankArchiv ({\"O}BA)},
  volume    = {2019},
  journal   = {BankArchiv ({\"O}BA)},
  edition   = {6},
  pages     = {411 -- 419},
  subject      = {Payment},
  language  = {de}
}
@inproceedings{WalaSchmid,
  author    = {Wala, Thomas and Schmid, Judith},
  title     = {Bewegungsf{\"o}rderung im Betrieb durch Active Workplace Design},
  series = {Coming Soon. The Future of Work, Education and Living},
  volume    = {2019},
  booktitle = {Coming Soon. The Future of Work, Education and Living},
  editor    = {Achinger, Regina and Gaisch, Martina},
  address   = {Linz},
  subject      = {Active Workplace},
  language  = {de}
}
@article{WalaFelleitner,
  author    = {Wala, Thomas and Felleitner, Katharina},
  title     = {Praxisbezug der Hochschullehre - dargestellt am Beispiel des {\"o}sterreichischen Fachhochschul-Sektors},
  series = {HM},
  volume    = {2019},
  journal   = {HM},
  number    = {1},
  pages     = {8 ff},
  subject      = {Teaching},
  language  = {de}
}
@incollection{Bernsteiner,
  author    = {Bernsteiner, Clemens},
  title     = {Kryptow{\"a}hrungen und Gewerberecht},
  series = {Kryptow{\"a}hrungen},
  booktitle = {Kryptow{\"a}hrungen},
  editor    = {Kirchmayr-Schliesselberger, Sabine and Klas, Wolfgang and Miernicki, Martin and Rinderle-Ma, Stefanie and Weilinger, Arthur},
  publisher      = {Fachhochschule Technikum Wien},
  pages     = {463 -- 487},
  subject      = {Currency},
  language  = {de}
}
@book{WalaBaumuellerKrimmel,
  author    = {Wala, Thomas and Baum{\"u}ller, Josef and Krimmel, Kathrin},
  title     = {Buchhaltung, Bilanzierung und Steuern},
  volume    = {2019},
  publisher = {Verlag {\"O}sterreich},
  address   = {Wien},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Accounting},
  language  = {de}
}
@article{WalaPatscheider,
  author    = {Wala, Thomas and Patscheider, Herwig},
  title     = {Modularisierung von Fachhochschul-Studieng{\"a}ngen},
  series = {zfhr},
  volume    = {2019},
  journal   = {zfhr},
  number    = {3},
  pages     = {79 ff},
  subject      = {Curricula},
  language  = {de}
}
@article{Wala,
  author    = {Wala, Thomas},
  title     = {Die betriebswirtschaftliche Klausur: Investitionsrechnung},
  series = {WISU},
  journal   = {WISU},
  number    = {10},
  pages     = {1122 ff},
  subject      = {Investitionsrechnung},
  language  = {de}
}
@article{Wala,
  author    = {Wala, Thomas},
  title     = {Die betriebswirtschaftliche Klausur: Rechnungswesen},
  series = {WISU},
  volume    = {2019},
  journal   = {WISU},
  number    = {3},
  pages     = {322 ff},
  subject      = {Accounting},
  language  = {de}
}
@book{Lehner,
  author    = {Lehner, Martin},
  title     = {Didaktik},
  publisher = {utb},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Didactics},
  language  = {de}
}
@article{Wala,
  author    = {Wala, Thomas},
  title     = {Move it! Fitness im B{\"u}ro mit Active Workplace Design},
  series = {ASoK},
  volume    = {2019},
  journal   = {ASoK},
  number    = {5},
  pages     = {186 ff},
  subject      = {Active Workplace},
  language  = {de}
}
@article{Wala,
  author    = {Wala, Thomas},
  title     = {Die betriebswirtschaftliche Klausur: Unternehmensf{\"u}hrung},
  series = {WISU},
  volume    = {2019},
  journal   = {WISU},
  pages     = {933 ff -- 8},
  subject      = {Management},
  language  = {de}
}
@book{Wala,
  author    = {Wala, Thomas},
  title     = {Klausurtraining Accounting \& Finance},
  publisher = {Bookboon},
  address   = {London},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Accounting \& Finance},
  language  = {de}
}
@article{SchneiderBartlmaeLeiboldetal.,
  author    = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}fmann, Petra and Tabakovic, Momir and Zelger, Thomas},
  title     = {New Assessment Method for Buildings and Districts towards "Net Zero Energy Buildings" Compatible with the Energy Scenario 2050},
  series = {REAL CORP 2019},
  journal   = {REAL CORP 2019},
  number    = {April 2019},
  subject      = {Renewable Energies},
  language  = {en}
}
@article{Lackner,
  author    = {Lackner, Maximilian},
  title     = {Industrial Engineering Management - THE key skill for the Digital Age},
  series = {The International Journal of Engineering and Science (THE IJES)},
  journal   = {The International Journal of Engineering and Science (THE IJES)},
  subject      = {Management},
  language  = {en}
}
@phdthesis{Frohner,
  author    = {Frohner, Matthias},
  title     = {Quality Criteria and Concepts for the Development of Mobile Health Applications},
  school      = {Fachhochschule Technikum Wien},
  subject      = {mHealth},
  language  = {en}
}
@misc{Sauermann,
  author    = {Sauermann, Stefan},
  title     = {Die Gazelle in der Krankenhaus-IT - neue Wege f{\"u}r die Sicherheitstechnische Kontrolle und Leistungs{\"u}berpr{\"u}fung},
  subject      = {Krankenhaus IT},
  language  = {de}
}
@article{SchneiderBartlmaeLeiboldetal.,
  author    = {Schneider, Simon and Bartlm{\"a}, Nadja and Leibold, Jens and Sch{\"o}ffmann, Petra and Tabakovic, Momir and Zelger, Thomas},
  title     = {New assessment method for buildings and districts towards "Net Zero Energy Buildings" compatible with the energy scenario 2050},
  series = {Corp},
  journal   = {Corp},
  pages     = {10},
  subject      = {Energy Technologies},
  language  = {en}
}
@inproceedings{TabakovicSchneiderLeiboldetal.,
  author    = {Tabakovic, Momir and Schneider, Simon and Leibold, Jens and Zelger, Thomas and Bartlm{\"a}, Nadja and Holzer, Peter and Sch{\"o}ffmann, Petra},
  title     = {Way to positive energy districts in Vienna},
  series = {Mission Innovation Austria},
  booktitle = {Mission Innovation Austria},
  subject      = {Energy Technologies},
  language  = {en}
}
@misc{Sauermann,
  author    = {Sauermann, Stefan},
  title     = {Presentation of successful use of IHE profiles in national strategies (Austria and Switzerland)},
  organization    = {EU; Czech Ministry of Health},
  subject      = {eHealth},
  language  = {en}
}
@misc{Sauermann,
  author    = {Sauermann, Stefan},
  title     = {Interoperabilit{\"a}t von Prozessen und IT-Systemen im Gesundheitswesen},
  organization    = {{\"O}sterreichische Gesellschaft f{\"u}r Gute Analysen und Laborpraxis},
  subject      = {QM und Digitalisierung},
  language  = {de}
}
@misc{Sauermann,
  author    = {Sauermann, Stefan},
  title     = {Forum Spital f{\"u}r Manager 2019 - Digitalisierung im Krankenhaus - Vorsitzender},
  organization    = {imh Konferenzen und Seminare},
  subject      = {eHealth},
  language  = {de}
}
@incollection{Tabakovic,
  author    = {Tabakovic, Momir},
  title     = {Development and Implementation of BIPV Courseware for Higher Education and Professionals},
  series = {Smart Education and e-Learning},
  booktitle = {Smart Education and e-Learning},
  publisher = {Springer},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Education},
  language  = {en}
}
@misc{Sauermann,
  author    = {Sauermann, Stefan},
  title     = {Data and Integrated Health Care: � Potential and Challenges of IT innovation},
  subject      = {eHealth},
  language  = {en}
}
@misc{Sauermann,
  author    = {Sauermann, Stefan},
  title     = {The potential of multi-stakeholder alignment in diabetes},
  subject      = {Diabetes},
  language  = {en}
}
@misc{Sauermann,
  author    = {Sauermann, Stefan},
  title     = {IHE Education \& IHE Internationales},
  subject      = {Health Interoperability},
  language  = {en}
}
@article{MarklLacknerSchmidetal.,
  author    = {Markl, Erich and Lackner, Maximilian and Schmid, Judith and Faast, Thomas},
  title     = {Mutual Benefits from Entrepreneurship of Non-business University Graduates for Academia and Founders},
  series = {International Academic Journal of Entrepreneurship},
  journal   = {International Academic Journal of Entrepreneurship},
  pages     = {8},
  abstract  = {There is a trend among universities to teach entrepreneurship and support startup initiatives. In this article, the state-ofthe- art in entrepreneurship higher education and university ecosystems of non-business schools is reviewed, and the example of the University of Applied Sciences Technikum Wien, Austria, and one of its startup show cases, Toolsense, is elaborated to understand critical success factors for non-business graduates as founders. The mutual benefits for universities and founders are discussed. In the case of Toolsense and the University of Applied Sciences, narrow band IoT as brought to the University by the startup. Implications on a universities' innovation and portfolio management are highlighted. Concerning startups, the importance of growth financing after initial success is elaborated.},
  subject      = {Entrepreneurship},
  language  = {en}
}
@inproceedings{GonzalezGutierrezTreitlerSpoerketal.,
  author    = {Gonzalez-Gutierrez, Joamin and Treitler, Manuel and Spoerk, Martin and Arbeiter, Florian and Schuschnigg, Stephan and Lammer, Herfried and Lackner, Maximilian and Aburaia, Mohamed and Poszvek, G{\"u}nther and Zhang, Haiguang and Sapkota, Janak and Holzer, Clemes},
  title     = {Carbon fiber reinforced thermoplastics for material extrusion additive manufacturing},
  series = {Conference proceedings of 35th International Conference of the Polymer Processing Society},
  booktitle = {Conference proceedings of 35th International Conference of the Polymer Processing Society},
  pages     = {5},
  abstract  = {In an effort to broaden the engineering applications of material extrusion based additive manufacturing (MEAM), new materials are being developed. Adding carbon-fibers (CF) has been one strategy to increase the mechanical performance of different thermoplastics. One challenge is to determine the amount of CF needed to increase the mechanical performance without affecting the "printability" of the compounds. In this paper, different amounts (10, 15, and 20 vol.\%) of CF were added to recycled polypropylene (rPP) and polyamide 12 (PA12). A compatibilizer was used for rPP, but not for PA12. Filaments for MEAM were extruded from the different compounds and the viscosity as well as the tensile properties were measured and compared to the processed polymeric matrices. It was observed that the viscosities at the angular frequencies relevant for MEAM (100 to 200 rad/s) were not significantly different for rPP+CF compounds, but it was higher for PA12+CF compounds. As expected, the elongation at break significantly decreased with the addition of CF for all compounds. For the composites with an rPP matrix, the Young's modulus and the ultimate tensile strength (UTS) continuously increased as the CF content increased to 20 vol.\%. For PA12-based materials, the Young's modulus and the UTS increased with CF content, but adding more than 15 vol.\% did not further improve these values. Therefore, it was concluded that for PA12 the maximum amount of CF that should be added was 15 vol.\%. Using scanning electron microscopy, it was observed that the CF were homogeneously dispersed in the rPP matrix, but not so well in the PA12 matrix, with fibers being more concentrated towards the rim of the filament. Finally, filaments of rPP, rPP+20CF, PA12 and PA12+15CF were used to print complex geometries by means of MEAM, and it was observed that CF helped to reduce the warpage compared to the unfilled filaments. A potential application of this phenomenon could be the reduction of the bed temperature to develop a more energy efficient MEAM process for semi-crystalline polymers.},
  subject      = {Additive Manufacturing},
  language  = {en}
}
@incollection{LacknerMarklCermak,
  author    = {Lackner, Maximilian and Markl, Erich and Cermak, Corinna},
  title     = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail},
  series = {Transportation Systems Analysis and Assessment},
  booktitle = {Transportation Systems Analysis and Assessment},
  publisher      = {Fachhochschule Technikum Wien},
  abstract  = {This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed.},
  subject      = {Energy},
  language  = {en}
}
@incollection{CermakMarklLackner,
  author    = {Cermak, Corinna and Markl, Erich and Lackner, Maximilian},
  title     = {Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail},
  series = {Transportation},
  booktitle = {Transportation},
  publisher = {Intech Open},
  publisher      = {Fachhochschule Technikum Wien},
  subject      = {Transportation},
  language  = {en}
}
@inproceedings{RauerWoeberAburaia,
  author    = {Rauer, Johannes and W{\"o}ber, Wilfried and Aburaia, Mohamed},
  title     = {An Autonomous Mobile Handling Robot Using Object Recognition},
  series = {Proceedings of ARW \& OAGM Workshop 2019},
  booktitle = {Proceedings of ARW \& OAGM Workshop 2019},
  subject      = {Mobile Robotics},
  language  = {en}
}
@misc{Rohatsch,
  author    = {Rohatsch, Lukas},
  title     = {Smart City Wien - Digital Solutions \& Technologies},
  subject      = {Smart City Wien},
  language  = {en}
}
@misc{Rohatsch,
  author    = {Rohatsch, Lukas},
  title     = {Digital Solutions for Smart Cities},
  subject      = {Smart City},
  language  = {en}
}
@inproceedings{LietzeKrizekBrezowar,
  author    = {Lietze, Stefanie and Krizek, Gerd Christian and Brezowar, Gabriela},
  title     = {Aufbau und Betrieb eines E-Learning Labors zur Lehrvideoproduktion},
  series = {Tagungsband},
  booktitle = {Tagungsband},
  editor    = {Pauschenwein, Jutta and Gutounig, Robert},
  organization    = {FH Joanneum},
  isbn      = {978-3-902103-86-4},
  pages     = {56 -- 62},
  subject      = {Teaching},
  language  = {de}
}
@inproceedings{EckerlWahlNimmervoll,
  author    = {Eckerl, Sabrina and Wahl, Harald and Nimmervoll, Alexander},
  title     = {Establishing a work-integrated bachelor degree program in computer science in Austria},
  series = {21st World Conference on Cooperative and Work-Integrated Education (WACE 2019), University of Cincinnati, Ohio, United States, 3-7 August, 2019},
  booktitle = {21st World Conference on Cooperative and Work-Integrated Education (WACE 2019), University of Cincinnati, Ohio, United States, 3-7 August, 2019},
  isbn      = {978-0-473-49649-4},
  pages     = {49 -- 57},
  subject      = {Work-Integrated Curriculum},
  language  = {en}
}
@inproceedings{WahlMenseEckerl,
  author    = {Wahl, Harald and Mense, Alexander and Eckerl, Sabrina},
  title     = {The Evaluation of the Work-integrated Computer Science Degree Program at the UAS Technikum Wien},
  series = {Proceedings of the 22nd International Conference on Interactive Collaborative Learning (ICL 2019)},
  booktitle = {Proceedings of the 22nd International Conference on Interactive Collaborative Learning (ICL 2019)},
  organization    = {ICL},
  pages     = {176 -- 186},
  subject      = {Work-integrated Program},
  language  = {en}
}
@misc{LietzeKrizekBrezowaretal.,
  author    = {Lietze, Stefanie and Krizek, Gerd Christian and Brezowar, Gabriela and Beck, Stefan},
  title     = {Bridging Diversity},
  subject      = {Diversity},
  language  = {en}
}
@article{RohatschWahlWagner,
  author    = {Rohatsch, Lukas and Wahl, Harald and Wagner, Josef},
  title     = {GREISSLER.PLUS - Moderne Wege zur Sicherung der Nahversorgung in l{\"a}ndlichen Regionen},
  series = {Jahrbuch der Logistikforschung},
  volume    = {2019},
  journal   = {Jahrbuch der Logistikforschung},
  pages     = {241 -- 252},
  subject      = {Nahversorgung},
  language  = {de}
}
@misc{Pasteka,
  author    = {Pasteka, Richard},
  title     = {International Lecture, University of Tr{\´a}s-os-Montes and Alto Douro, Portugal, "Human Respiratory System Modelling"},
  subject      = {Biomedical Engineering},
  language  = {en}
}
@inproceedings{KrizekLietzeBrezowar,
  author    = {Krizek, Gerd Christian and Lietze, Stefanie and Brezowar, Gabriela},
  title     = {Aufbau und Betrieb eines E-Learning Labors zur Lehrvideoproduktion},
  series = {Tagungsband 18. E-Learning Tag der FH JOANNEUM 2019},
  booktitle = {Tagungsband 18. E-Learning Tag der FH JOANNEUM 2019},
  abstract  = {Der Einsatz von Lernvideos ist aus zeitgem{\"a}ßer Lehre kaum noch wegzudenken. Um ad{\"a}quates, fachlich und didaktisch abgestimmtes Lehr-und Lernmaterial mit angemessenem Ressourcenaufwand zu erm{\"o}glichen, ist es f{\"u}r Hochschulen und fachliche ExpertInnen ein sinnvoller Weg, selbst Lehrvideos zu produzieren. Dieser Beitrag stellt ein Beispiel guter Praxis im Aufbau und Betrieb eines E-Learning Labors vor. Dabei werden die Infrastruktur und Technik, das Produktions-Prozedere sowie mediendidaktische und rechtliche Aspekte beleuchtet.},
  subject      = {eLearning},
  language  = {de}
}
@article{PastekaForjanSauermannetal.,
  author    = {Pasteka, Richard and Forjan, Mathias and Sauermann, Stefan and Drauschke, Andreas},
  title     = {Electro-mechanical Lung Simulator Using Polymer and Organic Human Lung Equivalents for Realistic Breathing Simulation},
  series = {Scientific Reports},
  volume    = {Vol 9},
  journal   = {Scientific Reports},
  number    = {No. 1},
  pages     = {Article number: 19778},
  abstract  = {Simulation models in respiratory research are increasingly used for medical product development and testing, especially because in-vivo models are coupled with a high degree of complexity and ethical concerns. This work introduces a respiratory simulation system, which is bridging the gap between the complex, real anatomical environment and the safe, cost-effective simulation methods. The presented electro-mechanical lung simulator, xPULM, combines in-silico, ex-vivo and mechanical respiratory approaches by realistically replicating an actively breathing human lung. The reproducibility of sinusoidal breathing simulations with xPULM was verified for selected breathing frequencies (10-18 bpm) and tidal volumes (400-600 ml) physiologically occurring during human breathing at rest. Human lung anatomy was modelled using latex bags and primed porcine lungs. High reproducibility of flow and pressure characteristics was shown by evaluating breathing cycles (nTotal = 3273) with highest standard deviation |3σ| for both, simplified lung equivalents (μV˙ = 23.98 ± 1.04 l/min, μP = -0.78 ± 0.63 hPa) and primed porcine lungs (μV˙ = 18.87 ± 2.49 l/min, μP = -21.13 ± 1.47 hPa). The adaptability of the breathing simulation parameters, coupled with the use of porcine lungs salvaged from a slaughterhouse process, represents an advancement towards anatomically and physiologically realistic modelling of human respiration.},
  subject      = {Breathing Simulation},
  language  = {en}
}
@misc{Pasteka,
  author    = {Pasteka, Richard},
  title     = {International Week Turku, "Hands-on learning and research applications"},
  subject      = {Biomedical Engineering},
  language  = {en}
}
@inproceedings{FibichTaunerRoessleretal.,
  author    = {Fibich, Christian and Tauner, Stefan and R{\"o}ssler, Peter and Horauer, Martin and Krapfenbauer, Markus and Linauer, Martin and Matschnig, Martin and Taucher, Herbert},
  title     = {Evaluation of Open-Source Linear Algebra Libraries in Embedded Applications},
  series = {8th Mediterranean Conference on Embedded Computing (MECO), co-sponsored by IEEE, June 10-14, 2019, Budva, Montenegro},
  booktitle = {8th Mediterranean Conference on Embedded Computing (MECO), co-sponsored by IEEE, June 10-14, 2019, Budva, Montenegro},
  pages     = {6},
  subject      = {Embedded Systems},
  language  = {en}
}
@inproceedings{PastekaSantosdaCostaForjan,
  author    = {Pasteka, Richard and Santos da Costa, Joao Pedro and Forjan, Mathias},
  title     = {Characteristic Waveforms for Testing of Medical Aerosol Inhalers},
  series = {8th European Medical and Biological Engineering Conference},
  booktitle = {8th European Medical and Biological Engineering Conference},
  publisher = {Springer International Publishing},
  pages     = {240 -- 246},
  abstract  = {Respiratory diseases are characterised by high prevalence among the European population. Medical aerosol inhalers are the most commonly used means of drug delivery into the human respiratory system. This paper focuses on characteristic waveforms that can be utilised during aerosol deposition studies to simulate conditions of rapid human inhalation. Additionally, an inhalatory waveform based on clinically recorded spirometry data is introduced. Experimental measurements are performed and simulation results mutually compared using the electro-mechanical lung simulator xPULM. The inhalatory waveforms are repeatably simulated with high fidelity in regards to the waveform shape with the lowest value of the Goodness of fit 0.89. Additionally, the measured values for all characteristic inhalatory parameters are simulated with low standard deviation < 1. The differences between the required and measured waveform shapes are small, < 3 L/min and do not influence the overall inhalatory volume. This opens a possibility of utilising the xPULM for medical aerosol inhalers testing.},
  subject      = {Breathing Simulation},
  language  = {en}
}
@inproceedings{PastekaForjan,
  author    = {Pasteka, Richard and Forjan, Mathias},
  title     = {Changes of particle deposition caused by different breathing patterns during active lung simulation},
  series = {41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)},
  booktitle = {41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)},
  abstract  = {Aerosols are an integral part of everyday life and as such are inhaled under various conditions and circumstances. These may vary based on the health and activity status of an individual. The aim of this work is to analyse the particle deposition mechanisms during the simulation of three different breathing patterns using an aerosol representing the PM1 fraction of fine particles. The active electro-mechanical lung simulator xPULM is utilized as a driving force and is combined with a non-invasive direct reading optical aerosol measurement system. Results show differences between the number of deposited particles for the three breathing patterns and for the three typical size ranges of airborne particles. Overall, the presented approach demonstrates the possibility of determining the changes of aerosol uptake based on different breathing patterns using the electro-mechanical lung simulator and laboratory produced aerosols. Further measurement cycles must be performed in order to validate the found interactions and to characterize the major influencing parameters.},
  subject      = {Biomedical Engineering, Breathing simulation},
  language  = {en}
}
@inproceedings{FibichHorauerObermaisser,
  author    = {Fibich, Christian and Horauer, Martin and Obermaisser, Roman},
  title     = {Reliability-Enhanced High-Level Synthesis using Memory Profiling and Fault Injection},
  series = {2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), Vancouver, BC, Canada, 2019},
  booktitle = {2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), Vancouver, BC, Canada, 2019},
  pages     = {1363 -- 1370},
  subject      = {Circuit faults},
  language  = {en}
}
@article{Lietze,
  author    = {Lietze, Stefanie},
  title     = {Teamteaching, Fehler- und Feedbackkultur},
  volume    = {2019},
  number    = {01/2019},
  editor    = {f{\"u}r LehrerInnenbildung, Journal},
  pages     = {90 -- 96},
  subject      = {Teaching},
  language  = {de}
}
@inproceedings{RohatschWahlWagner,
  author    = {Rohatsch, Lukas and Wahl, Harald and Wagner, Josef},
  title     = {GREISSLER.PLUS: Towards a Modern Distribution of Regional Goods in Rural Areas in the Digital Era},
  series = {Proceedings of the 8th International Conference on Smart Cities and Green ICT Systems},
  booktitle = {Proceedings of the 8th International Conference on Smart Cities and Green ICT Systems},
  isbn      = {978-989-758-373-5},
  subject      = {Logistic Challenges},
  language  = {en}
}
@misc{Pasteka,
  author    = {Pasteka, Richard},
  title     = {Applications of Biomedical Engineering in Respiratory Care},
  subject      = {Biomedical Engineering},
  language  = {en}
}
@inproceedings{PastekaForjan,
  author    = {Pasteka, Richard and Forjan, Mathias},
  title     = {Changes of particle deposition caused by different breathing patterns during active lung simulation},
  series = {41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2019},
  booktitle = {41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2019},
  organization    = {IEEE},
  pages     = {4969 -- 4972},
  subject      = {Lung Simulation},
  language  = {en}
}
@article{FibichTaunerRoessleretal.,
  author    = {Fibich, Christian and Tauner, Stefan and R{\"o}ssler, Peter and Horauer, Martin and Matschnig, Martin and Taucher, Herbert},
  title     = {FIJI - Fault InJection Instrumenter},
  series = {EURASIP Journal on Embedded Systems},
  volume    = {2019},
  journal   = {EURASIP Journal on Embedded Systems},
  number    = {Februar 2019},
  pages     = {19},
  subject      = {Fault injection},
  language  = {en}
}
@article{KrizekHausleitnerBoehmeetal.,
  author    = {Krizek, Gerd Christian and Hausleitner, Rene and B{\"o}hme, Laura and Olaverri-Monreal, Cristina},
  title     = {Empirical Analysis of Safe Distance Calculation by the Stereoscopic Capturing and Processing of Images Through the Tailigator System},
  series = {sensors},
  journal   = {sensors},
  abstract  = {Driver disregard for the minimum safety distance increases the probability of rear-end collisions. In order to contribute to active safety on the road, we propose in this work a low-cost Forward Collision Warning system that captures and processes images. Using cameras located in the rear section of a leading vehicle, this system serves the purpose of discouraging tailgating behavior from the vehicle driving behind. We perform in this paper the pertinent field tests to assess system performance, focusing on the calculated distance from the processing of images and the error margins in a straight line, as well as in a curve. Based on the evaluation results, the current version of the Tailigator can be used at speeds up to 50 km per hour without any restrictions. The measurements showed similar characteristics both on the straight line and in the curve. At close distances, between 3 and 5 m, the values deviated from the real value. At average distances, around 10 to 15 m, the Tailigator achieved the best results. From distances higher than 20 m, the deviations increased steadily with the distance. We contribute to the state of the art with an innovative low-cost system to identify tailgating behavior and raise awareness, which works independently of the rear vehicle's communication capabilities or equipment.},
  subject      = {tailgating},
  language  = {en}
}
@inproceedings{HimmelstossVotzi,
  author    = {Himmelstoß, Felix and Votzi, Helmut},
  title     = {Four quadratic DC/DC converters with one low-side switch and a tapped inductor at the input side},
  series = {Proceedings of IECON 2019, 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, Sep. 14-17, Lisbon Portugal},
  booktitle = {Proceedings of IECON 2019, 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, Sep. 14-17, Lisbon Portugal},
  pages     = {1774 -- 1779},
  subject      = {DC/DC Converter},
  language  = {en}
}
@article{TeuschlHolnthonerMonforte,
  author    = {Teuschl, Andreas and Holnthoner, Wolfgang and Monforte, Xavier},
  title     = {Repopulation of an auricular cartilage scaffold, AuriScaff, perforated with an enzyme combination},
  series = {Acta Biomater.},
  volume    = {2019},
  journal   = {Acta Biomater.},
  number    = {Mar/86},
  pages     = {207 -- 222},
  abstract  = {Biomaterials currently in use for articular cartilage regeneration do not mimic the composition or architecture of hyaline cartilage, leading to the formation of repair tissue with inferior characteristics. In this study we demonstrate the use of "AuriScaff", an enzymatically perforated bovine auricular cartilage scaffold, as a novel biomaterial for repopulation with regenerative cells and for the formation of high-quality hyaline cartilage. AuriScaff features a traversing channel network, generated by selective depletion of elastic fibers, enabling uniform repopulation with therapeutic cells. The complex collagen type II matrix is left intact, as observed by immunohistochemistry, SEM and TEM. The compressive modulus is diminished, but three times higher than in the clinically used collagen type I/III scaffold that served as control. Seeding tests with human articular chondrocytes (hAC) alone and in co-culture with human adipose-derived stromal/stem cells (ASC) confirmed that the network enabled cell migration throughout the scaffold. It also guides collagen alignment along the channels and, due to the generally traverse channel alignment, newly deposited cartilage matrix corresponds with the orientation of collagen within articular cartilage. In an osteochondral plug model, AuriScaff filled the complete defect with compact collagen type II matrix and enabled chondrogenic differentiation inside the channels. Using adult articular chondrocytes from bovine origin (bAC), filling of even deep defects with high-quality hyaline-like cartilage was achieved after 6 weeks in vivo. With its composition and spatial organization, AuriScaff provides an optimal chondrogenic environment for therapeutic cells to treat cartilage defects and is expected to improve long-term outcome by channel-guided repopulation followed by matrix deposition and alignment. STATEMENT OF SIGNIFICANCE: After two decades of tissue engineering for cartilage regeneration, there is still no optimal strategy available to overcome problems such as inconsistent clinical outcome, early and late graft failures. Especially large defects are dependent on biomaterials and their scaffolding, guiding and protective function. Considering the currently used biomaterials, structure and mechanical properties appear to be insufficient to fulfill this task. The novel scaffold developed within this study is the first approach enabling the use of dense cartilage matrix, repopulate it via channels and provide the cells with a compact collagen type II environment. Due to its density, it also provides better mechanical properties than materials currently used in clinics. We therefore think, that the auricular cartilage scaffold (AuriScaff) has a high potential to improve future cartilage regeneration approaches.},
  subject      = {Auricular cartilage},
  language  = {en}
}
@inproceedings{WoeberTibihikaOlaverriMonrealetal.,
  author    = {W{\"o}ber, Wilfried and Tibihika, Papius D and Olaverri-Monreal, Cristina and Mehnen, Lars and Sykacek, Peter and Meimberg, Harald},
  title     = {Comparison of Unsupervised Learning Methods for Natural Image Processing},
  series = {Biodiversity Information Science and Standards},
  booktitle = {Biodiversity Information Science and Standards},
  number    = {3},
  subject      = {Machine Learning},
  language  = {en}
}
@inproceedings{HimmelstossJungmayer,
  author    = {Himmelstoß, Felix and Jungmayer, Michael},
  title     = {Zero-Current-Switching Buck Converter},
  series = {Proceedings of 2019 International Conference on Electrical Drives \& Power Electronics (EDPE), Novy Smokovec, Slovakia, 24-26 Sept. 2019},
  booktitle = {Proceedings of 2019 International Conference on Electrical Drives \& Power Electronics (EDPE), Novy Smokovec, Slovakia, 24-26 Sept. 2019},
  pages     = {36 -- 41},
  subject      = {DC/DC Converter},
  language  = {en}
}
@article{NuernbergerSchneidervanOschetal.,
  author    = {N{\"u}rnberger, Sylvia and Schneider, Cornelia and van Osch, Gerjo and Keibl, Claudia and Rieder, Bernhard and Monforte, Xavier and Teuschl, Andreas and M{\"u}hleder, Severin and Holnthoner, Wolfgang and Sch{\"a}dl, Barbara and Gahleitner, Christoph and Redl, Heinz and Wolbank, Susanne},
  title     = {Repopulation of an auricular cartilage scaffold, AuriScaff, perforated with an enzyme combination.},
  series = {Acta Biomaterialia},
  journal   = {Acta Biomaterialia},
  subject      = {Tissue Engineering},
  language  = {en}
}
@inproceedings{WoeberAburaiaOlaverriMonreal,
  author    = {W{\"o}ber, Wilfried and Aburaia, Mohamed and Olaverri-Monreal, Cristina},
  title     = {Classification of Streetsigns Using Gaussian Process Latent Variable Models},
  series = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria},
  booktitle = {2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria},
  subject      = {Streetsigns},
  language  = {en}
}
@article{Holnthoner,
  author    = {Holnthoner, Wolfgang},
  title     = {Adipose-tissue-derived therapeutic cells in their natural environment as an autologous cell therapy strategy: the microtissue-stromal vascular fraction},
  series = {Eur Cell Mater.},
  volume    = {2019},
  journal   = {Eur Cell Mater.},
  number    = {Feb, 37},
  pages     = {113 -- 133},
  abstract  = {The prerequisite for a successful clinical use of autologous adipose-tissue-derived cells is the highest possible regenerative potential of the applied cell population, the stromal vascular fraction (SVF). Current isolation methods depend on high enzyme concentration, lysis buffer, long incubation steps and mechanical stress, resulting in single cell dissociation. The aim of the study was to limit cell manipulation and obtain a derivative comprising therapeutic cells (microtissue-SVF) without dissociation from their natural extracellular matrix, by employing a gentle good manufacturing practice (GMP)-grade isolation. The microtissue-SVF yielded larger numbers of viable cells as compared to the improved standard-SVF, both with low enzyme concentration and minimal dead cell content. It comprised stromal tissue compounds (collagen, glycosaminoglycans, fibroblasts), capillaries and vessel structures (CD31+, smooth muscle actin+). A broad range of cell types was identified by surface-marker characterisation, including mesenchymal, haematopoietic, pericytic, blood and lymphatic vascular and epithelial cells. Subpopulations such as supra-adventitial adipose-derived stromal/stem cells and endothelial progenitor cells were significantly more abundant in the microtissue-SVF, corroborated by significantly higher potency for angiogenic tube-like structure formation in vitro. The microtissue-SVF showed the characteristic phenotype and tri-lineage mesenchymal differentiation potential in vitro and an immunomodulatory and pro-angiogenic secretome. In vivo implantation of the microtissue-SVF combined with fat demonstrated successful graft integration in nude mice. The present study demonstrated a fast and gentle isolation by minor manipulation of liposuction material, achieving a therapeutically relevant cell population with high vascularisation potential and immunomodulatory properties still embedded in a fraction of its original matrix.},
  subject      = {Adipose-tissue},
  language  = {en}
}
@article{SattingerPapaStujaetal.,
  author    = {Sattinger, Vinzenz and Papa, Maximilian and Stuja, Kemajl and Kubinger, Wilfried},
  title     = {Methodik zur Entwicklung sicherer kollaborativer Produktionssysteme im Rahmen von Industrie 4.0},
  series = {e \& i Elektrotechnik und Informationstechnik},
  journal   = {e \& i Elektrotechnik und Informationstechnik},
  subject      = {Robotics},
  language  = {de}
}
@article{HeimelSwiadekSlezaketal.,
  author    = {Heimel, Patrick and Swiadek, Nicole V. and Slezak, Paul and Kerbl, Markus and Schneider, Cornelia and N{\"u}rnberger, Sylvia and Redl, Heinz and Teuschl, Andreas and Hercher, David},
  title     = {Iodine-Enhanced Micro-CT Imaging of Soft Tissue on the Example of Peripheral Nerve Regeneration},
  series = {Contrast Media \& Molecular Imaging},
  journal   = {Contrast Media \& Molecular Imaging},
  subject      = {µCT},
  language  = {en}
}
@inproceedings{HimmelstossEdelmoser,
  author    = {Himmelstoß, Felix and Edelmoser, Karl},
  title     = {Zero-Current-Switching Boost Converter, Power Conversion and Intelligent Motion},
  series = {Proceedings of PCIM 2019, Nuernberg, Germany, May 7-9, 2019},
  booktitle = {Proceedings of PCIM 2019, Nuernberg, Germany, May 7-9, 2019},
  isbn      = {978-3-8007-4938-6},
  pages     = {1686 -- 1691},
  subject      = {Discontinuous Conduction Mode},
  language  = {en}
}
@inproceedings{HimmelstossVotzi,
  author    = {Himmelstoß, Felix and Votzi, Helmut},
  title     = {A family of quadratic DC/DC converters with one low-side switch and a tapped inductor at the output side},
  series = {Aegean Conference on Electrical Machines and Power Electronics \& Optimization of Electrical \& Electronic Equipment Conference, Istanbul Turkey, August, 27 - 29, 2019},
  booktitle = {Aegean Conference on Electrical Machines and Power Electronics \& Optimization of Electrical \& Electronic Equipment Conference, Istanbul Turkey, August, 27 - 29, 2019},
  pages     = {6},
  subject      = {DC/DC Converter},
  language  = {en}
}