TY  - JOUR
A1  - Deluca, Marco
A1  - Bermejo Moratinos, Raúl
A1  - Grünbichler, Hannes
A1  - Pressler, Volker
A1  - Danzer, Robert
A1  - Nickel, Klaus G.
T1  - Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics
JF  - Scripta materialia
KW  - Materials
Y1  - 2019
IS  - 63(2)
SP  - 343
EP  - 346
ER  - 
TY  - JOUR
A1  - Grünbichler, Hannes
A1  - Kreith, Josef
A1  - Bermejo Moratinos, Raúl
A1  - Supancic, Peter
A1  - Danzer, Robert
T1  - Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties
JF  - Journal of the European Ceramic Society
KW  - Materials
Y1  - 2019
IS  - 30
SP  - 249
EP  - 254
ER  - 
TY  - JOUR
A1  - Bermejo Moratinos, Raúl
A1  - Grünbichler, Hannes
A1  - Kreith, Josef
A1  - Auer, Christoph
T1  - Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature
JF  - Journal of the European Ceramic Society
KW  - Materials
Y1  - 2019
IS  - 30
SP  - 705
EP  - 712
ER  - 
TY  - JOUR
A1  - Schwaab, Holger
A1  - Grünbichler, Hannes
A1  - Supancic, Peter
A1  - Kamlah, Marc
T1  - Macroscopical non-linear material model for ferroelectric materials inside a hybrid finite element formulation
JF  - International Journal of Solids and Structures
KW  - Ferroelectricity
KW  - Piezoceramics
KW  - Materials
Y1  - 2019
IS  - 49
SP  - 457
EP  - 469
ER  - 
TY  - JOUR
A1  - Bermejo Moratinos, Raul
A1  - Grünbichler, Hannes
A1  - Lube, Tanja
A1  - Supancic, Peter
A1  - Danzer, Robert
A1  - Sestakova, Lucie
T1  - Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures
JF  - Key engineering materials
KW  - Materials
KW  - Multilayer  Architecture
Y1  - 2019
VL  - 2011
IS  - Vol. 465
SP  - 41
EP  - 46
ER  - 
TY  - JOUR
A1  - Grünbichler, Hannes
A1  - Kreith, Josef
A1  - Bermejo Moratinos, Raúl
A1  - Krautgasser, Clemens
A1  - Supancic, Peter
T1  - Influence of the Load Dependent Material Properties on the Performance of Multilayer Piezoelectric Actuators
JF  - IUTAM Bookseries (24), Springer
KW  - Materials
Y1  - 2019
VL  - 2011
IS  - 24
SP  - 243
EP  - 253
ER  - 
TY  - JOUR
A1  - Markl, Erich
A1  - Grünbichler, Hannes
A1  - Lackner, Maximilian
T1  - Cyanobacteria for PHB Bioplastics Production: A Review
JF  - IntechOpen
N2  - Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste)
materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of
dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature.
KW  - Bio-based Plastics
KW  - PHB
Y1  - 
ER  - 
TY  - JOUR
A1  - Markl, Erich
A1  - Grünbichler, Hannes
A1  - Lackner, Maximilian
T1  - PHB - Bio Based and Biodegradable Replacement for PP: A Review
JF  - Novel Techniques in Nutrition and Food Science
KW  - Bio Degradable
KW  - PHB
KW  - Bio-based Plastics
Y1  - 
VL  - 2
IS  - 2
ER  - 
TY  - CHAP
A1  - Grünbichler, Hannes
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Lackner, Maximilian
A1  - Kreith, Josef
A1  - Bermejo Moratinos, Raúl
A1  - Supancic, Peter
A1  - Danzer, Robert
T1  - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios
T2  - th International Conference on Smart Materials and Structures
KW  - Robotics
Y1  - 2019
PB  - Material Sci Eng 2018 (7)
ER  - 
TY  - GEN
A1  - Grünbichler, Hannes
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Lackner, Maximilian
A1  - Kreith, Josef
A1  - Bermejo Moratinos, Raúl
A1  - Supancic, Peter
A1  - Danzer, Robert
T1  - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios
KW  - Robotics
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Aburaia, Mohamed
A1  - Lackner, Maximilian
A1  - Grünbichler, Hannes
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Lammer, H.
A1  - Zhang, Haiguang
A1  - Wang, J.
A1  - Sapotka, J.
A1  - Janics, T.
A1  - Hailberger, M.
T1  - Freeform-FDM process development using natural fibre reinforced biopolymers
T2  - 2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK
KW  - Freeform Printing
KW  - Additive Manufacturing
Y1  - 
ER  -