TY - CHAP A1 - Stuja, Kemajl A1 - Poszvek, Günther A1 - Wölfel, Walter A1 - Markl, Erich T1 - Integrated Method for the Design and Evaluation of Safety & Secure Manufacturing Systems T2 - 29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION KW - Industrial Security KW - Production Systems KW - Security Y1 - SN - 978-3-902734-20-4 SN - 1726-9679 ER - TY - CHAP A1 - Stuja, Kemajl A1 - Poszvek, Günther A1 - Wölfel, Walter A1 - Markl, Erich T1 - Integrated Method for the Design and Evaluation of Safety & Secure Manufacturing Systems T2 - 29th DAAAM International Symposium on Intelligent Manufacturing and Automation KW - Saftey KW - Robotics Y1 - 2020 ER - TY - GEN A1 - Stuja, Kemajl A1 - Poszvek, Günther A1 - Wölfel, Walter A1 - Markl, Erich T1 - Integrated Method for the Design and Evaluation of Safety & Secure Manufacturing Systems KW - Saftey KW - Robotics Y1 - 2020 ER - TY - CHAP A1 - Krym, Tomasz A1 - Poniszewska-Maranda, Aneta A1 - Markl, Erich T1 - Automatic process of continuous integration of web application T2 - Intelligent Networking and Collaborative Systems 2018 N2 - Cloud solutions in the business are nowadays becoming more and more popular. Many companies decide to deploy their applications in the cloud or migrate them from their non-cloud based solutions. It allows them to focus on functionalities and turn over the work connected with setting up and managing an infrastructure (with its issues such as scalability or availability) to the cloud providers. This paper provides an in-depth analysis of cloud solutions in aspects of distributed business services. It is supported by a web application that is responsible for testing the provided services to supports the analysis. KW - Software Testing KW - Automation KW - Web Application KW - Java Y1 - ER - TY - CHAP A1 - Poniszewska-Maranda, Aneta A1 - Ignaczewski, Bartosz A1 - Markl, Erich ED - Younas, Muhammad ED - Awan, Irfan ED - Ghinea, George ED - Catalan Cid, Marisa T1 - Towards the Cloud solutions in aspects of Distributed Business Services T2 - Mobile Web and Intelligent Information Systems KW - Cloud Solutions KW - Distributed Business Services Y1 - SN - 0302-9743 ER - TY - GEN A1 - Poniszewska-Maranda, Aneta A1 - Ignaczewski, Bartosz A1 - Markl, Erich T1 - Towards the Cloud solutions in aspects of Distributed Business Services KW - Cloud Solutions KW - Distributed Business Services Y1 - ER - TY - GEN A1 - Krym, Tomasz A1 - Poniszewska-Maranda, Aneta A1 - Markl, Erich T1 - Automatic process of continuous integration of web application KW - Software Testing KW - Automation KW - Web Application KW - Java Y1 - ER - TY - GEN A1 - Bucher, Christoph Michael A1 - Aburaia, Mohamed A1 - Markl, Erich A1 - Engelhardt-Nowitzki, Corinna A1 - Lackner, Maximilian A1 - Gonzales-Gutierrez, J. A1 - Lammer, Helmuth T1 - Continuous fiber reinforced freeform 3D printing KW - Additive Manufacturing Y1 - ER - TY - CHAP A1 - Lackner, Maximilian A1 - Markl, Erich A1 - Aburaia, Mohamed T1 - Cybersecurity Management for (Industrial) Internet of Things: Challenges and Opportunities T2 - Journal of Information Technology & Software Engineering Keywords KW - Security Y1 - ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich T1 - Konferenz der Mechatronik-Plattform: Autonome mechatronische Systeme T2 - FH CAMPUS 02, 22. November 2018 Digital Manufacturing & Robotics im Department Industrial Engineering KW - Autonom KW - Mechatronic Y1 - 2020 ER - TY - CHAP A1 - Bucher, Michael A1 - Aburaia, Mohamed A1 - Markl, Erich A1 - Engelhardt-Nowitzki, Corinna A1 - Lackner, Maximilian A1 - Gonzalez-Gutierrez, Joamin A1 - Lammer, Herfried T1 - Poster Symposium on ADDitive Manufacturing and Innovative Technologies T2 - Symposium on ADDitive Manufacturing and Innovative Technologies KW - Innovative Technologies KW - ADDitive KW - Manufacturing Y1 - 2020 ER - TY - GEN A1 - Dannereder, Florian A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Pachschwöll, Paul Herwig A1 - Aburaia, Mohamed A1 - Shooman, Diane T1 - Development of a 3D-Printed Bionic Hand with Muscle- and Force Control KW - Robotics Y1 - ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich T1 - Digital Manufacturing & Robotics im Department Industrial Engineering T2 - KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme KW - Digital Manufacturing KW - Robotics KW - Industrial Engineering Y1 - ER - TY - JOUR A1 - Markl, Erich A1 - Grünbichler, Hannes A1 - Lackner, Maximilian T1 - Cyanobacteria for PHB Bioplastics Production: A Review JF - IntechOpen N2 - Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature. KW - Bio-based Plastics KW - PHB Y1 - ER - TY - JOUR A1 - Knapp, Alexander A1 - Lackner, Maximilian A1 - Markl, Erich T1 - Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning JF - International Journal of Advance Engineering and Research Development N2 - Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents. KW - Floor cleaning KW - Mechanical Action KW - Chemicals Y1 - 2018 SN - 2348-4470 SP - 84 EP - 86 ER - TY - JOUR A1 - Markl, Erich A1 - Grünbichler, Hannes A1 - Lackner, Maximilian T1 - PHB - Bio Based and Biodegradable Replacement for PP: A Review JF - Novel Techniques in Nutrition and Food Science KW - Bio Degradable KW - PHB KW - Bio-based Plastics Y1 - VL - 2 IS - 2 ER - TY - BOOK A1 - de Vries, Sytse A1 - Markl, Erich A1 - Lackner, Maximilian T1 - Energy efficiency management in the shipping industry KW - Transportation KW - Energy efficiency Y1 - SN - 978 3 659 71981 3 PB - Lambert Academic Publishing ER - TY - CHAP A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Bermejo Moratinos, Raúl A1 - Supancic, Peter A1 - Danzer, Robert T1 - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios T2 - th International Conference on Smart Materials and Structures KW - Robotics Y1 - 2019 PB - Material Sci Eng 2018 (7) ER - TY - GEN A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Bermejo Moratinos, Raúl A1 - Supancic, Peter A1 - Danzer, Robert T1 - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios KW - Robotics Y1 - 2018 ER - TY - CHAP A1 - Dannereder, Florian A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Pachschwöll, Paul Herwig A1 - Aburaia, Mohamed A1 - Shooman, Diane T1 - Development of a 3D-Printed Bionic Hand with Muscle- and Force Control T2 - Proceedings of the Austrian Robotics Workshop 2018 KW - Robotics Y1 - ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich T1 - Digital Manufacturing & Robotics im Department Industrial Engineering T2 - Konferenz der Mechatronik Plattform Autonome mechatronische Systeme N2 - Digitalisierung und Automatisierung in produzierender Industrie sind Schlagwörter heutiger Forschungsbarbeiten am Department Industrial Engineering der Fachhochschule Technikum Wien. Künstliche Intelligenz, vernetzte Sensorsysteme oder übergreifende Prozessplanung ermöglichen Optimierung hinsichtlich Produktionszeit oder Fertigung von individualisierten Produkten, was zur Losgröße 1 führt. In diesem Dokument werden Forschungstätigkeiten des Departments Industrial Engineering im Kontext Vernetzung, Servicerobotik sowie Industrierobotik zusammengefasst. KW - Industrial Engineering KW - Digital Manufacturing KW - Networking KW - Robotics Y1 - 2018 SP - 20 EP - 21 ER - TY - GEN A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Aburaia, Mohamed T1 - Digital Manufacturing & Robotics im Department Industrial Engineering KW - Industrial Engineering KW - Digital Manufacturing KW - Networking KW - Robotics Y1 - ER - TY - CHAP A1 - Aburaia, Mohamed A1 - Lackner, Maximilian A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lammer, H. A1 - Zhang, Haiguang A1 - Wang, J. A1 - Sapotka, J. A1 - Janics, T. A1 - Hailberger, M. T1 - Freeform-FDM process development using natural fibre reinforced biopolymers T2 - 2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK KW - Freeform Printing KW - Additive Manufacturing Y1 - ER - TY - CHAP A1 - Dannereder, Florian A1 - Pachschwöll, Paul A1 - Aburaia, Mohamed A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Engelhardt-Nowitzki, Corinna A1 - Shooman, Diane T1 - Development of a 3D-printed Bionic Hand with Muscle- and Force Control T2 - Austrian Robotics Workshop 2018 KW - Robotics KW - Prosthetics KW - 3D-Printing Y1 - ER -