TY - CHAP A1 - Gurdet, Elisabeth A1 - Salzbrunn, Benedikt A1 - Kubinger, Wilfried T1 - Empfehlungen für die Gestaltung von Human Machine Interfaces zur Wildtiererkennung während der Frühjahrsmahd T2 - Tagungsband des 21. Arbeitswissenschaftlichen Kolloquiums KW - Detection KW - Machine Vision Y1 - SP - 222 EP - 232 ER - TY - GEN A1 - Gurdet, Elisabeth A1 - Salzbrunn, Benedikt A1 - Kubinger, Wilfried T1 - Empfehlungen für die Gestaltung von Human Machine Interfaces zur Wildtiererkennung während der Frühjahrsmahd KW - Detection KW - Machine Vision Y1 - ER - TY - JOUR A1 - Maleiner, Babette A1 - Tomasch, Janine A1 - Heher, Philipp A1 - Spadiut, Oliver A1 - Rünzler, Dominik A1 - Fuchs, Christiane T1 - The Importance of Biophysical and Biochemical Stimuli in Dynamic Skeletal Muscle Models. JF - Frontiers in Physiology N2 - Classical approaches to engineer skeletal muscle tissue based on current regenerative and surgical procedures still do not meet the desired outcome for patient applications. Besides the evident need to create functional skeletal muscle tissue for the repair of volumetric muscle defects, there is also growing demand for platforms to study muscle-related diseases, such as muscular dystrophies or sarcopenia. Currently, numerous studies exist that have employed a variety of biomaterials, cell types and strategies for maturation of skeletal muscle tissue in 2D and 3D environments. However, researchers are just at the beginning of understanding the impact of different culture settings and their biochemical (growth factors and chemical changes) and biophysical cues (mechanical properties) on myogenesis. With this review we intend to emphasize the need for new in vitro skeletal muscle (disease) models to better recapitulate important structural and functional aspects of muscle development. We highlight the importance of choosing appropriate system components, e.g., cell and biomaterial type, structural and mechanical matrix properties or culture format, and how understanding their interplay will enable researchers to create optimized platforms to investigate myogenesis in healthy and diseased tissue. Thus, we aim to deliver guidelines for experimental designs to allow estimation of the potential influence of the selected skeletal muscle tissue engineering setup on the myogenic outcome prior to their implementation. Moreover, we offer a workflow to facilitate identifying and selecting different analytical tools to demonstrate the successful creation of functional skeletal muscle tissue. Ultimately, a refinement of existing strategies will lead to further progression in understanding important aspects of muscle diseases, muscle aging and muscle regeneration to improve quality of life of patients and enable the establishment of new treatment options. KW - Bioreactor KW - Muscle KW - Biomaterial Y1 - ER - TY - GEN A1 - Dolezal, Dominik A1 - Posekany, Alexandra A1 - Pucher, Robert A1 - Motschnig, Renate T1 - Effects of Introducing a Game-Based Student Response System into a Flipped, Person-Centered Classroom on Object-Oriented Design KW - Computer Science Education KW - Digital Learning KW - eLearning KW - Computer Science Y1 - ER - TY - GEN A1 - Huemer, Florian A1 - Polzer, Thomas A1 - Steininger, Andreas T1 - Using a Duplex Time-to-Digital Converter for Metastability Characterization of an FPGA KW - Metastability KW - Time-to-digital Converter KW - TDC KW - Transition Detection KW - Converter Y1 - ER - TY - GEN A1 - Mense, Alexander T1 - Smart or Secure - Security im medizinischen IoT Zeitalter … KW - Security KW - eHealth KW - IoT Y1 - ER - TY - CHAP A1 - Meyer, Markus A1 - Donsa, Klaus A1 - Truskaller, Thomas A1 - Frohner, Matthias A1 - Pohn, Birgit A1 - Felfernig, Alexander A1 - Sinner, Franz A1 - Pieber, Thomas T1 - Development of a Protocol for Automated Glucose Measurement Transmission Used in Clinical Decision Support Systems Based on the Continua Design Guidelines T2 - Conference Proceedings eHealth 2018 KW - Mobile Health KW - Standardization KW - Clinical Decision Support Systems KW - Diabetes KW - Medication Errors Y1 - ER - TY - GEN A1 - Meyer, Markus A1 - Donsa, Klaus A1 - Truskaller, Thomas A1 - Frohner, Matthias A1 - Pohn, Birgit A1 - Felfernig, Alexander A1 - Sinner, Franz A1 - Pieber, Thomas T1 - Development of a Protocol for Automated Glucose Measurement Transmission Used in Clinical Decision Support Systems Based on the Continua Design Guidelines KW - Mobile Health KW - Standardization KW - Clinical Decision Support Systems KW - Diabetes KW - Medication Errors Y1 - ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Premm, C. A1 - Schidler, Susanne A1 - Werner, Andrea A1 - Moisl, F. T1 - Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks für netz- und systemdienliche Anwendungen T2 - Tagungsband PV-Symposium 2018 KW - Photovoltaics KW - Renewable Energy KW - Energy Storage Y1 - ER - TY - JOUR A1 - Kuba, Markus T1 - A Note on the generating function of p-Bernoulli numbers JF - Quaestiones Mathematicae KW - Mathematics Y1 - ER - TY - RPRT A1 - Teschl, Gerald A1 - Teschl, Susanne T1 - Einführung in Mathematica KW - Mathematica Y1 - ER - TY - JOUR A1 - Teschl, Susanne A1 - Unterkofler, Karl A1 - Mochalski, Pawel A1 - Teschl, Gerald A1 - Ager, C. A1 - Mayhew, C.A. A1 - King, Julian T1 - Modeling-based determination of physiological parameters of systemic VOCs by breath gas analysis, part 2. JF - Journal of Breath Research KW - Breath KW - Gas KW - Analysis Y1 - VL - 12 ER - TY - CHAP A1 - Stockinger, Harald T1 - Biographical information from monasterial archives: Ernst Mach's school year at the Gymnasium of the Benedictines in Seitenstetten T2 - History of Mathematics and Teaching of Mathematics KW - Mathematics KW - Teaching KW - History Y1 - ER - TY - GEN A1 - Stockinger, Harald T1 - Biographical information from monasterial archives: Ernst Mach's school year at the Gymnasium of the Benedictines in Seitenstetten KW - Mathematics KW - Teaching KW - History Y1 - ER - TY - JOUR A1 - Slezak, Paul A1 - Slezak, Cyrill A1 - Hartinger, Joachim A1 - Teuschl, Andreas A1 - Nürnberger, Sylvia A1 - Redl, Heinz A1 - Mittermayr, Rainer T1 - A Low Cost Implantation Model in the Rat That Allows a Spatial Assessment of Angiogenesis. JF - Frontiers in Bioengineering and Biotechnology N2 - There is continual demand for animal models that allow a quantitative assessment of angiogenic properties of biomaterials, therapies, and pharmaceuticals. In its simplest form, this is done by subcutaneous material implantation and subsequent vessel counting which usually omits spatial data. We have refined an implantation model and paired it with a computational analytic routine which outputs not only vessel count but also vessel density, distribution, and vessel penetration depth, that relies on a centric vessel as a reference point. We have successfully validated our model by characterizing the angiogenic potential of a fibrin matrix in conjunction with recombinant human vascular endothelial growth factor (rhVEGF165). The inferior epigastric vascular pedicles of rats were sheathed with silicone tubes, which were subsequently filled with 0.2 ml of fibrin and different doses of rhVEGF165, centrically embedding the vessels. Over 4 weeks, tissue samples were harvested and subsequently immunohistologically stained and computationally analyzed. The model was able to detect variations over the angiogenic potentials of growth factor spiked fibrin matrices. Adding 20 ng of rhVEGF165 resulted in a significant increase in vasculature while 200 ng of rhVEGF165 did not improve vascular growth. Vascularized tissue volume increased during the first week and vascular density increased during the second week. Total vessel count increased significantly and exhibited a peak after 2 weeks which was followed by a resorption of vasculature by week 4. In summary, a simple implantation model to study in vivo vascularization with only a minimal workload attached was enhanced to include morphologic data of the emerging vascular tree. KW - Tissue Engineering KW - Bioreactor KW - Biomaterial Y1 - ER - TY - JOUR A1 - Berkovitch, Yulia A1 - Cohen, Talia A1 - Peled, Eli A1 - Schmidhammer, Robert A1 - Hildner, Florian A1 - Teuschl, Andreas A1 - Wolbank, Susanne A1 - Yelin, Dvir A1 - Redl, Heinz A1 - Seliktar, Dror T1 - Hydrogel composition and laser micropatterning to regulate sciatic nerve regeneration. JF - Journal of Tissue Engineering and Regenerative Medicine N2 - Treatment of peripheral nerve injuries has evolved over the past several decades to include the use of sophisticated new materials endowed with trophic and topographical cues that are essential for in vivo nerve fibre regeneration. In this research, we explored the use of an advanced design strategy for peripheral nerve repair, using biological and semi-synthetic hydrogels that enable controlled environmental stimuli to regenerate neurons and glial cells in a rat sciatic nerve resection model. The provisional nerve growth conduits were composed of either natural fibrin or adducts of synthetic polyethylene glycol and fibrinogen or gelatin. A photo-patterning technique was further applied to these 3D hydrogel biomaterials, in the form of laser-ablated microchannels, to provide contact guidance for unidirectional growth following sciatic nerve injury. We tested the regeneration capacity of subcritical nerve gap injuries in rats treated with photo-patterned materials and compared these with injuries treated with unpatterned hydrogels, either stiff or compliant. Among the factors tested were shear modulus, biological composition, and micropatterning of the materials. The microchannel guidance patterns, combined with appropriately matched degradation and stiffness properties of the material, proved most essential for the uniform tissue propagation during the nerve regeneration process. KW - Tissue Engineering KW - Biomaterials KW - Nerve Regeneration Y1 - SP - 1049 EP - 1061 ER - TY - JOUR A1 - Nau, Thomas A1 - Teuschl, Andreas A1 - Ebner, Anna A1 - Jung, Ilse A1 - Schenk, Christian T1 - Low revision rate and excellent outcome of primary ACL repair with a minimum follow-up of 5 years. JF - Muscle, ligaments and tendons Journal N2 - Introduction: Due to limitations of ACL reconstruction, primary ACL repair has recently regained research interest. Although abandoned in the past, primary repair with conservation of the original ligament demonstrates considerable advantages compared to reconstruction. We hypothesized that early repair, strictly limited to patients with a proximal ACL rupture and excellent tissue quality of the remaining ACL stump, would lead to equal revision rates and subjective outcomes as reported for ACL reconstruction after a minimum of 5 years. Methods: In this questionnaire study, patients who had a primary ACL repair between 2002 and 2009 were invited to participate. Besides any potential revision surgery, the Tegner activity scale and the Knee Injury and Osteoarthritis Outcome Score were included in the evaluation. Results: Out of 1912 patients who had ACL related surgery during the observation period, 221 (11.4%) had a primary ACL repair. 60 patients (61 knees) were available for follow-up. In 2/61 (3.3%) cases ACL revision surgery was performed and one patient had meniscus surgery of the affected side. The median Tegner activity scale was 6 (range, 3 to 10). The mean KOOS subscores were 88.8% (Function/Sports), 86.6% (Quality of life), 94.6 (Symptoms), 94.0 (Pain) and 97.0 (Activities of Daily Living). Conclusion: Primary ACL repair, strictly limited to proximal ruptures with good tissue quality leads to revision rates and subjective outcome comparable to ACL reconstruction. Level of evidence: IV. KW - Regeneration Y1 - SP - 185 EP - 190 ER - TY - CHAP A1 - Hackethal, Johannes A1 - Schuh, Christina A1 - Hofer, Alexandra A1 - Meixner, Barbara A1 - Hennerbichler, Simone A1 - Redl, Heinz A1 - Teuschl, Andreas T1 - Human Placenta Laminin-111 as a Multifunctional Protein for Tissue Engineering and Regenerative Medicine T2 - Advances in Experimental Medicine and Biology KW - Biomaterial KW - Tissue Engineering KW - Regenerative medicine Y1 - PB - Springer ER - TY - GEN A1 - Drauschke, Andreas T1 - Neues aus der Welt der Optik - von Laserschwertern und Tarnvorrichtungen KW - Optics Y1 - ER - TY - GEN A1 - Drauschke, Andreas T1 - Effiziente Solarzellen mit Metamaterialien KW - Photonics Y1 - ER - TY - CHAP A1 - Tkachenko Bril, Andrés Igor A1 - Jagos, Harald A1 - David, Veronika A1 - Pils, Katharina A1 - Gaudernak, Jakob A1 - Rafolt, Dietmar ED - Schreier, Günter ED - Hayn, Dieter T1 - Proof of Concept of a Partial Weight-Bearing Supporting Real-Time Feedback System T2 - Health Informatics meets eHealth - Proceedings of the 12th eHealth Conference KW - Ambulation KW - Weight-Bearing KW - Patient KW - Feedback Y1 - PB - IOS Press CY - Amsterdam ER - TY - CHAP A1 - Franzl, Gerald A1 - Reif, Valerie A1 - Berger, Angela A1 - Frohner, Matthias A1 - Gottschalk, Marion A1 - Koch, Georg T1 - Interoperabilität im Datenaustausch in der Energiewirtschaft vom Use Case zum Test der Integrationsprofile T2 - 15. Symposium Energieinnovation KW - Interoperability KW - Virtual Power Plant KW - Smart Grid KW - Power Supply Y1 - ER - TY - GEN A1 - Franzl, Gerald A1 - Reif, Valerie A1 - Berger, Angela A1 - Frohner, Matthias A1 - Gottschalk, Marion A1 - Koch, Georg T1 - Interoperabilität im Datenaustausch in der Energiewirtschaft vom Use Case zum Test der Integrationsprofile KW - Interoperability KW - Virtual Power Plant KW - Smart Grid KW - Power Supply Y1 - ER - TY - GEN A1 - Tkachenko Bril, Andrés Igor A1 - Jagos, Harald A1 - David, Veronika A1 - Pils, Katharina A1 - Gaudernak, Jakob A1 - Rafolt, Dietmar T1 - Proof of Concept of a Partial Weight-Bearing Supporting Real-Time Feedback System KW - Ambulation KW - Weight-Bearing KW - Patient KW - Feedback Y1 - ER - TY - GEN A1 - Drauschke, Andreas T1 - Applications of Optogenetics KW - Optogenetics Y1 - 2018 ER - TY - RPRT A1 - Freistetter, Florian T1 - The Power of Lauf KW - Bioreactor KW - Muscle KW - Tissue Engineering Y1 - ER - TY - CHAP A1 - Schneider, Simon A1 - Zelger, Thomas A1 - Laurent, Pierre T1 - Energy Building Stock Simulation and Planning for Small Municipalities - A Web-based Urban Energy System Model for Potential Analysis and Citizen Participation T2 - Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS KW - Energy KW - Simulation Y1 - CY - Funchal, Madeira ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Premm, C. A1 - Schidler, Susanne A1 - Werner, Andrea A1 - Moisl, F. T1 - Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks für netz- und systemdienliche Anwendungen KW - Photovoltaics KW - Renewable Energy KW - Energy Storage Y1 - ER - TY - GEN A1 - Werner, Andrea A1 - Becker, Gernot T1 - Innovation durch Kompetenzerweiterung – Der Nutzen des kooperativen Innovationslehrganges “smart(D)ER” für Unternehmen im Tätigkeitsfeld der dezentralen erneuerbaren Energiesysteme KW - Training KW - Energy System Y1 - ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Illich, Peter A1 - Werner, Andrea A1 - Schidler, Susanne T1 - Community Storage Projects in private and commercial multi-party buildings KW - Energy Storage KW - Community KW - Energy Supply Y1 - ER - TY - CHAP A1 - Pichler, Mario A1 - Meisel, Markus A1 - Goranovic, Andrija A1 - Leonhartsberger, Kurt T1 - Decentralized Energy Networks based on Blockchain: Background, Overview and Concept Discussion T2 - Proceeding BSCT 2018: 1st Workshop on Blockchain and Smart Contract Technologies N2 - This paper provides a snapshot of the globally ongoing decentralization of (business) relations in the energy sector. This tendency can be observed in other domains as well and is accompanied by new digital technological developments. Blockchain technology is assigned disruptive potential when it comes to realize those decentralization ideas. This hype about Blockchain is mainly company-driven without a solid academic basis yet. The authors are currently involved in several research efforts for utilizing distributed energy resources like photovoltaic systems, batteries and electric cars for the setup of energy communities and marketplaces. The paper, therefore, presents detailed investigations of background and motivations for decentralization and the building of (local) energy communities and (peer-to-peer) marketplaces for sustainable utilization of renewable energies. An overview of recent related Blockchain-based works is presented, and the current state and feasibility for the realization of the envisioned decentralized solutions are discussed. In this way, the work aimed at contributing to a research-based decision foundation for upcoming Blockchain-based decentralization efforts. KW - Energy Network KW - Blockchain Y1 - ER - TY - RPRT A1 - Zelger, Thomas A1 - Kerschbaum, E. A1 - Figl, H. A1 - Huemer-Kals, V. A1 - Gutmann, R. A1 - Gruber, E. A1 - Schneider, U. A1 - Obermayer, J. A1 - Fürst, B. A1 - Dürk, N. A1 - Kloiber, K. A1 - Ornetzeder, M. A1 - Capari, L. T1 - Way2Smart Korneuburg: Start Up in eine sozial verträgliche, energieautonome Smart City KW - Smart City KW - Korneuburg Y1 - ER - TY - GEN A1 - Schmid, Judith A1 - Wagner, Daniela T1 - Entrepreneurial Orientation in Design Thinking – A Chance for the Tourism & Hospitality Industry? KW - Design Y1 - ER - TY - JOUR A1 - Fairbrother, Andrew A1 - Boyd, Matthew A1 - Lyu, Yadong A1 - Avenet, Julien A1 - Illich, Peter A1 - Wang, Yu A1 - Kempe, Michael A1 - Dougherty, Brian A1 - Bruckman, Laura A1 - Gu, Xiaohong T1 - Differential degradation patterns of photovoltaic backsheets at the array level JF - Solar Energy KW - Photovoltaics KW - Degradation KW - Field Survey KW - Solar Power Y1 - VL - 2018 IS - 163 ER - TY - CHAP A1 - Poniszewska-Maranda, Aneta A1 - Ignaczewski, Bartosz A1 - Markl, Erich ED - Younas, Muhammad ED - Awan, Irfan ED - Ghinea, George ED - Catalan Cid, Marisa T1 - Towards the Cloud solutions in aspects of Distributed Business Services T2 - Mobile Web and Intelligent Information Systems KW - Cloud Solutions KW - Distributed Business Services Y1 - SN - 0302-9743 ER - TY - GEN A1 - Poniszewska-Maranda, Aneta A1 - Ignaczewski, Bartosz A1 - Markl, Erich T1 - Towards the Cloud solutions in aspects of Distributed Business Services KW - Cloud Solutions KW - Distributed Business Services Y1 - ER - TY - CHAP A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Stuja, Kemajl A1 - Wölfel, Walter T1 - Different safety certifiable concepts for mobile robots in industrial environments T2 - 29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION KW - Mobile Robot KW - Safety Ring KW - Safe Navigation KW - Aware Environment KW - Safe Sensor Y1 - 2020 ER - TY - GEN A1 - Leibold, Jens A1 - Zelger, Thomas T1 - Projekt SC- Mikroquartiere - Modellierung verschiedener Nachverdichtungsszenarien und Optimierung bezüglich erneuerbarer Energieversorgung und der Lebensqualität der NutzerInnen KW - Renewable Energy Y1 - 2018 ER - TY - JOUR A1 - Mense, Alexander A1 - Athanasiadis, Leandros T1 - Concept for Sharing Distributed Personal Health Records with Blockchains JF - DATA, INFORMATICS AND TECHNOLOGY: AN INSPIRATION FOR IMPROVED HEALTHCARE, Studies in Health Technology and Informatics, vol 251 KW - Personal Health KW - Blockchain Y1 - SN - 0926-9630 (print) SN - 1879-8365 (online) PB - IOS Press ER - TY - CHAP A1 - Beneder, Roman A1 - Lechner, Markus A1 - Schmitt, Patrick T1 - Development of a Signal-Toolkit to Increase the Availability of Measurement Equipment at Courses Dedicated to Technical Sciences T2 - Proceedings of the IEEE Global Engineering Education Conference (EDUCON2018), 17-20 April 2018, Santa Cruz de Tenerife, Spain KW - Open-Source Tool KW - Measurement Equipment KW - Signal Processing Y1 - 2018 SP - 373 EP - 383 ER - TY - CHAP A1 - Huemer, Florian A1 - Polzer, Thomas A1 - Steininger, Andreas T1 - Using a Duplex Time-to-Digital Converter for Metastability Characterization of an FPGA T2 - IEEE 21st International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS), 25-27 April 2018, Budapest, Hungary KW - Metastability KW - Time-to-digital Converter KW - TDC KW - Transition Detection KW - Carry Chain KW - Converter Y1 - 2018 SN - 2473-2117 SP - 141 EP - 146 ER - TY - CHAP A1 - Votzi, Helmut A1 - Himmelstoß, Felix A1 - Ertl, Hans T1 - Active Hybrid Filter Applied with a Multi-Cell Switch-Mode Power Amplifier T2 - Power Electronics and Motion Control PEMC 2018, 27-29 August 2018, Budapest, Hungary KW - Switch-mode power amplifier KW - Linear amplifier KW - Hybrid filter KW - Amplifier Y1 - 2018 SN - 978-1-5386-4198-9 SP - 52 EP - 57 ER - TY - CHAP A1 - Beneder, Roman A1 - Lechner, Markus A1 - Schmitt, Patrick T1 - Development of a Signal Generator for Study Programs Dedicated to Electronic Engineering T2 - Proceedings of the IEEE Global Engineering Education Conference (EDUCON2018), 17-20 April 2018, Santa Cruz de Tenerife, Spain KW - Open-Source Tool KW - Measurement Equipment KW - Signal Processing Y1 - 2018 SP - 369 EP - 372 ER - TY - GEN A1 - Beneder, Roman A1 - Lechner, Markus A1 - Schmitt, Patrick T1 - Development of a Signal-Toolkit to Increase the Availability of Measurement Equipment at Courses Dedicated to Technical Sciences KW - Open-Source Tool KW - Measurement Equipment KW - Signal Processing Y1 - ER - TY - GEN A1 - Beneder, Roman A1 - Lechner, Markus A1 - Schmitt, Patrick T1 - Development of a Signal Generator for Study Programs Dedicated to Electronic Engineering KW - Open-Source Tool KW - Measurement Equipment KW - Signal Processing Y1 - ER - TY - GEN A1 - Votzi, Helmut A1 - Himmelstoß, Felix A1 - Ertl, Hans T1 - Active Hybrid Filter Applied with a Multi-Cell Switch-Mode Power Amplifier KW - Switch-mode power amplifier KW - Linear amplifier KW - Hybrid filter KW - Amplifier Y1 - ER - TY - JOUR A1 - Veigl, Christoph A1 - Miesenberger, Klaus T1 - A toolkit for user-centered design of assistive technology solutions JF - Journal on Technology & Persons with Disabilities KW - Assistive Technology KW - User Centered Design KW - Personalization KW - Motor Disabilities KW - Human Computer Interface Y1 - VL - 6 SP - 43 EP - 61 ER - TY - GEN A1 - Klaus, Benjamin T1 - AsTeRICS Ergo - Umgebungssteuerung: intuitiv, individuell & kostengünstig KW - Environmental Control KW - Open Source KW - Assistive Technology Y1 - 2018 ER - TY - CHAP A1 - Himmelstoß, Felix A1 - Edelmoser, Karl T1 - Modified Basic DC-DC Converters T2 - Power Conversion and Intelligent Motion PCIM 2018, 5-7 June 2018, Nuernberg, Germany KW - DC/DC converter KW - Power conversion KW - Modelling KW - Converter Y1 - 2018 SN - 978-3-8007-4646-0 ER - TY - JOUR A1 - Veigl, Christoph A1 - Miesenberger, Klaus T1 - A toolkit for user-centered design of assistive technology solutions JF - Journal on Technology & Persons with Disabilities, Volume 6 (2018) KW - Toolkit KW - Assistive Technology KW - Embedded Systems Y1 - 2019 ER -