TY - CHAP A1 - Gurdet, Elisabeth A1 - Salzbrunn, Benedikt A1 - Kubinger, Wilfried T1 - Empfehlungen für die Gestaltung von Human Machine Interfaces zur Wildtiererkennung während der Frühjahrsmahd T2 - Tagungsband des 21. Arbeitswissenschaftlichen Kolloquiums KW - Detection KW - Machine Vision Y1 - SP - 222 EP - 232 ER - TY - GEN A1 - Gurdet, Elisabeth A1 - Salzbrunn, Benedikt A1 - Kubinger, Wilfried T1 - Empfehlungen für die Gestaltung von Human Machine Interfaces zur Wildtiererkennung während der Frühjahrsmahd KW - Detection KW - Machine Vision Y1 - ER - TY - BOOK A1 - Schmid, Judith A1 - Wagner, Daniela T1 - Unternehmerische Grundhaltung im Design Thinking - Eine Chance für den Tourismus? KW - Design KW - Entrepreneurship Y1 - PB - Springer ER - TY - CHAP A1 - Peppoloni, Mauro A1 - Hirschl, Alexander A1 - Leonhartsberger, Kurt T1 - Operational Behaviour of SWT T2 - Wind Energy Exploitation in Urban Environment KW - Wind Turbine KW - Wind Power KW - Vibration KW - Oscillation Y1 - SP - 45 EP - 56 PB - Springer Nature ER - TY - CHAP A1 - Marko, Thomas A1 - Kubinger, Wilfried ED - Katalinic, B. T1 - Automatic Stereo Camera Calibration in Real-World Environments without Defined Calibration Objects T2 - Proceedings of the 29th DAAAM International Symposium KW - Stereo Camera KW - Automatic Calibration KW - Mobile Robots Y1 - SN - 1726-9679 PB - DAAAM International CY - Vienna, Austria ER - TY - CHAP A1 - Fuchslocher, Florian A1 - Rambausek, Martin A1 - Kubinger, Wilfried A1 - Peschak, Bernhard T1 - Concept and Implementation of a Tele-operated Robot for ELROB 2016 T2 - OAGM-ARW Workshop 2017 KW - Robotics Y1 - 2018 SP - 57 EP - 60 ER - TY - GEN A1 - Fuchslocher, Florian A1 - Rambausek, Martin A1 - Kubinger, Wilfried A1 - Peschak, Bernhard T1 - Concept and Implementation of a Tele-operated Robot for ELROB 2016 KW - Robotics Y1 - 2018 ER - TY - CHAP A1 - Spulak, David A1 - Otrebski, Richard A1 - Kubinger, Wilfried T1 - Object Tracking by Combining Supervised and Adaptive Online Learning through Sensor Fusion of Multiple Stereo Camera Systems T2 - Proceedings of the Austrian Robotics Workshop 2015 KW - Object Tracking Y1 - ER - TY - CHAP A1 - Spulak, David A1 - Otrebski, Richard A1 - Kubinger, Wilfried T1 - Evaluation of PCA, LDA and Fisherfaces in Appearance-based Object Detection in Thermal Infra-red Images T2 - Procedia Engineering 100 KW - Object Detection Y1 - ER - TY - CHAP A1 - Spulak, David A1 - Otrebski, Richard A1 - Kubinger, Wilfried T1 - A Probabilistic, Multivariate Approach for Object Recognition in Thermal Infra-Red Images T2 - 2014 International Conference on Connected Vehicles and Expo (ICCVE) KW - Object Recognition Y1 - ER - TY - GEN A1 - Spulak, David A1 - Otrebski, Richard A1 - Kubinger, Wilfried T1 - Evaluation of PCA, LDA and Fisherfaces in Appearance-based Object Detection in Thermal Infra-red Images KW - Object Detection Y1 - ER - TY - JOUR A1 - Kubinger, Wilfried A1 - Sommer, Roland T1 - Industrie 4.0 - Auswirkungen von Digitalisierung und Internet auf den Industriestandort JF - e&i Elektrotechnik und Informationstechnik KW - Industry 4.0 KW - Digitalisation KW - Industry Location Y1 - 2018 VL - 133 IS - 7 SP - 330 EP - 333 ER - TY - CHAP A1 - Gujon, Philip A1 - Kubinger, Wilfried T1 - Analysis of Image Enhancement Methods for Outdoor-Application T2 - Proceedings of the 27th DAAM International Symposium 2016 KW - Image Enhancement Y1 - 2018 SP - 40 EP - 43 ER - TY - GEN A1 - Gujon, Philip A1 - Kubinger, Wilfried T1 - Analysis of Image Enhancement Methods for Outdoor-Application KW - Image Enhancement Y1 - 2018 ER - TY - CHAP A1 - Kubinger, Wilfried T1 - Sensor System for Obstacle and Lane Detection for an Autonomous Vehicle T2 - Tagungsband des 7. Fachkolloquiums für Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE2010), Wien KW - Sensor KW - Autonomous Y1 - 2019 SP - 137 EP - 140 ER - TY - CHAP A1 - Kubinger, Wilfried T1 - Co-Chair der Special Session „3D Scene Reconstruction“ T2 - 52. Internationales Symposium ELMAR, Zadar (Kroatien) KW - 3D Scene Y1 - 2019 ER - TY - GEN A1 - Kubinger, Wilfried T1 - Introduction to State Space Control Course "New Technologies" KW - Space Control KW - Training Y1 - 2019 ER - TY - CHAP A1 - Kubinger, Wilfried T1 - Analyse der Zuverlässigkeit von bildgebenden Sensoren T2 - Tagungsband Tag der Mechatronik, Wien KW - Sensor Y1 - 2019 SP - 19 EP - 20 ER - TY - CHAP A1 - Kubinger, Wilfried T1 - Einachs- und Mehrachsregelung T2 - Taschenbuch Robotik – Montage – Handhabung KW - Robotics Y1 - 2019 SP - 202 EP - 211 PB - Fachbuchverlag Leipzig im Carl Hanser Verlag CY - München ER - TY - GEN A1 - Kubinger, Wilfried T1 - DARPA Grand / Urban Challenge, Course "New Technologies” KW - Urban Challenge KW - Training Y1 - 2019 ER - TY - GEN A1 - Kubinger, Wilfried T1 - DARPA Grand / Urban Challenge KW - Urban Challenge Y1 - 2019 ER - TY - CHAP A1 - Ambrosch, Roland A1 - Rinnerthaler, Franz A1 - Kubinger, Wilfried T1 - Building an autonomous, mobile demonstration platform for embedded vision applications T2 - Annals of DAAAM / Proceeding of the 17th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Mechtronics and Robotics" KW - Robotics Y1 - 2019 SN - 3-901509-57-7 ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Premm, C. A1 - Schidler, Susanne A1 - Werner, Andrea A1 - Moisl, F. T1 - Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks für netz- und systemdienliche Anwendungen T2 - Tagungsband PV-Symposium 2018 KW - Photovoltaics KW - Renewable Energy KW - Energy Storage Y1 - ER - TY - CHAP A1 - Peppoloni, Mauro A1 - Hirschl, Alexander A1 - Leonhartsberger, Kurt T1 - Environmental Influences on SWT Vibrations and Oscillations T2 - Wind Energy Exploitation in Urban Environment KW - Wind Turbine KW - Vibration KW - Decoupling Element KW - Oscillation KW - Wind Power Y1 - SP - 57 EP - 78 PB - Springer Nature ER - TY - CHAP A1 - Stuja, Kemajl A1 - Poszvek, Günther A1 - Markl, Erich A1 - Aburaia, Mohamed T1 - Design and Optimization of Pumping Aggregate for Hydraulic Active Car Suspension using Software SolidWorks T2 - 26TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION N2 - This work represents the design and performance optimization of pumping aggregate for hydraulic active car suspension systems. For solving of this task is required wide scope of interdisciplinary knowledge. The software used in this project was SolidWorks from Dassault Systemes. Using this tool is possible to analyse and optimize the flow of hydraulic fluid throw the electromotor of pumping aggregate. This papers shows among other, how to set the input parameters and constraints such as pressure and velocity, how to simulate a rotating flow of cooling fluid inside intermediate regions between stator and rotor. For approving a required lifetime of pumping aggregate a fatigue analysis was done and represented above. The verification of simulation model and mandatory validation of simulation results are made. The conclusions at the end of this work have confirmed the usage of computational fluid dynamic – software for future researches of pumping aggregates. KW - Hydraulic KW - Car KW - SolidWorks Y1 - 2020 ER - TY - CHAP A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed T1 - Towards intelligent Manufacturing – Die Digitale Fabrik der FH Technikum Wien als Plattform für Ausbildung und angewandte Forschung T2 - Konferenz der Mechatronik-Plattform: Smart Factory FH Technikum Wien 2016 KW - Manufacturing Y1 - 2020 ER - TY - CHAP A1 - Schweidler, Rene A1 - Aburaia, Mohamed A1 - Engelhardt-Nowitzki, Corinna T1 - Design of an Industrial Robot with Six Degrees of Freedom for Educational Purposes T2 - OAGM & ARW JOINT WORKSHOP ON "COMPUTER VISION AND ROBOTICS KW - Industrial KW - Robot KW - Education Y1 - 2020 ER - TY - CHAP A1 - Leonhartsberger, Kurt T1 - SPIN.OFF – SPeicherINtegration in das Büro(OFFice)gebäude FutureBase T2 - Fachtagung Energietage 2018: Netzstabilität der Zukunft KW - Integration KW - Energy Storage Y1 - ER - TY - CHAP A1 - Komenda, Titanilla A1 - Malisa, Viktorio T1 - Implementation of the ECTS-barometer to illustrate course achievement using the Master degree program Mechatronics/Robotics as a model T2 - Proceedings of the Joint International IGIP-SEFI Annual Conference 2010, At Trnava KW - Robotics KW - Mechatronic KW - Teaching Y1 - 2019 ER - TY - JOUR A1 - Eder, Gabriele C. A1 - Voronko, Yuliya A1 - Dimitriadis, Simon A1 - Knöbl, Karl A1 - Ujvári, Gusztáv A1 - Berger, Karl A. A1 - Halwachs, Martin A1 - Neumaier, Lukas A1 - Hirschl, Christina T1 - Climate specific accelerated ageing tests and evaluation of ageing induced electrical, physical, and chemical changes JF - Progress in Photovoltaics: Research and Applications 2018 KW - Photovoltaik KW - Degradation Y1 - N1 - DOI:10.1002/pip.3090 SP - 1 EP - 16 ER - TY - CHAP A1 - Malisa, Viktorio A1 - Hieger, Christof T1 - Graphical Analysis about the Definition of Mechatronics T2 - Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium KW - Mechatronic Y1 - 2019 SN - 978-3-901509-70-4 SN - 1726-9679 SP - 1845 EP - 1847 ER - TY - BOOK A1 - Hieger, Christof T1 - Mechatronische Integration eines bionischen Roboterarms KW - Robotics KW - Mechatronic Y1 - 2019 PB - VDM Verlag Dr. Müller ER - TY - JOUR A1 - Traussnig, Udo A1 - Malisa, Viktorio T1 - Netzwerken für die Mechatronik JF - atp edition KW - Mechatronic KW - Networking Y1 - 2019 IS - 12 SP - 888 EP - 890 ER - TY - CHAP A1 - Hauer, Stefan A1 - Malisa, Viktorio A1 - Hieger, Christof A1 - Stuja, Kemajl T1 - Design and simulation of modular robot work cells T2 - Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium, Vienna (Austria) KW - Robotics Y1 - 2019 SN - 978-3-901509-70-4 ER - TY - CHAP A1 - Hesse, Stefan A1 - Malisa, Viktorio A1 - Hieger, Christof T1 - Feedback zum Taschenbuch: Robotik – Montage – Handhabung T2 - Tagungsband des 7. Fachkolloquiums für Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE), Wien KW - Robotics Y1 - 2019 SN - 978-3-902759-00-9 SP - 113 EP - 116 ER - TY - GEN A1 - Schmid, Judith A1 - Keßler, Alexander A1 - Barredy, Celine A1 - Frank, Hermann T1 - Entrepreneurial Marketing in Family firms KW - Marketing KW - Entrepreneurship Y1 - ER - TY - JOUR A1 - Rauer, Johannes Nikolaus A1 - Kroiss, Michael A1 - Kryvinska, Natalia A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed T1 - Cross-university virtual teamwork as a means of internationalization at home JF - The International Journal of Management Education, Volume 19, Issue 3 KW - Virtual Teamwork Y1 - IS - Issue 3 ER - TY - JOUR A1 - Otrebski, Richard A1 - Rauer, Johannes A1 - Engelhardt-Nowitzki, Corinna A1 - Kryvinska, Natalia A1 - Aburaia, Mohamed A1 - Pospisil, Dominik T1 - Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling JF - International Journal of Ubiquitous Systems and Pervasive Networks (JUSPN) KW - Communication Modeling KW - Data Modeling KW - Digital Manufacturing Y1 - 2020 IS - Volume 12, Issue 2 ER - TY - CHAP A1 - Schneider, Simon A1 - Zelger, Thomas A1 - Laurent, Pierre T1 - Energy Building Stock Simulation and Planning for Small Municipalities - A Web-based Urban Energy System Model for Potential Analysis and Citizen Participation T2 - Proceedings of the 7th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS KW - Energy KW - Simulation Y1 - CY - Funchal, Madeira ER - TY - JOUR A1 - Hu, Qingxi A1 - Feng, Di A1 - Zhang, Haiguang A1 - Yao, Yuan A1 - Aburaia, Mohamed A1 - Lammer, Herfried T1 - Oriented to Multi-Branched Structure Unsupported 3D Printing Method Research JF - Materials, vol. 13, no. 9, p. 2023, Apr. 2020 KW - Structure KW - 3D KW - Printing Y1 - 2020 ER - TY - JOUR A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed A1 - Rauer, Johannes T1 - Research-based teaching in digital manufacturing and robotics - the Digital Factory at the UAS Technikum Wien as an exemplary case JF - CLF2020 TU Graz KW - Digital Manufacturing KW - Robotics Y1 - 2020 ER - TY - CHAP A1 - Otrebski, Richard A1 - Pospisil, Dominik A1 - Engelhardt-Nowitzki, Corinna A1 - Kryvinska, Natalia A1 - Aburaia, Mohamed T1 - Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling T2 - The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada N2 - Cyberphysical production systems are an important part of today’s manufacturing process. The ever-growing need of highly optimized, i.e. at the same time flexible and e� cient systems, requires the use of not only appropriate machines, but as well a communication framework and data model that is manufacturer independent and scalable. This paper proposes a communicationframework based on OPC UA that employs an agent-based architecture. The proposed system has been implemented and tested in the Digital Factory of the UAS Technikum Wien. It shows promising behavior within distributed manufacturing systems. KW - Digital Manufacturing KW - Data Modeling KW - Communication Modeling Y1 - ER - TY - CHAP A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed A1 - Markl, Erich T1 - Smart Manufacturing in the Digital Factory – a Practical Case Study of an Industrie 4.0 Implementation T2 - EUROCAST 2017, Sixteenth International Conference on Computer Aided Systems Theory KW - Smart Manufacturing KW - Digital Factory KW - Industrie 4.0 Y1 - 2020 ER - TY - CHAP A1 - Stuja, Kemajl A1 - Mirlind, Brugi A1 - Markl, Erich A1 - Aburaia, Mohamed T1 - Lightweight Educational Scara Robot for Palletizing of USB Sticks T2 - Proceedings of the 27th International DAAAM Symposium 2016, DAAAM 2017 KW - Education KW - Robot KW - USB Y1 - 2020 ER - TY - GEN A1 - Aburaia, Mohamed T1 - Digital Manufacturing KW - Industry 4.0 Y1 - 2018 ER - TY - CHAP A1 - Stuja, Kemajl A1 - Poszvek, Günther A1 - Wölfel, Walter A1 - Markl, Erich T1 - Integrated Method for the Design and Evaluation of Safety & Secure Manufacturing Systems T2 - 29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION KW - Industrial Security KW - Production Systems KW - Security Y1 - SN - 978-3-902734-20-4 SN - 1726-9679 ER - TY - CHAP A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Stuja, Kemajl A1 - Wölfel, Walter T1 - Different safety certifiable concepts for mobile robots in industrial environments T2 - 29th DAAAM International Symposium on Intelligent Manufacturing and Automation KW - Saftey KW - Robotics Y1 - 2020 ER - TY - CHAP A1 - Stuja, Kemajl A1 - Poszvek, Günther A1 - Wölfel, Walter A1 - Markl, Erich T1 - Integrated Method for the Design and Evaluation of Safety & Secure Manufacturing Systems T2 - 29th DAAAM International Symposium on Intelligent Manufacturing and Automation KW - Saftey KW - Robotics Y1 - 2020 ER - TY - GEN A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed A1 - Markl, Erich T1 - Smart Manufacturing in the Digital Factory – a Practical Case Study of an Industrie 4.0 Implementation KW - Smart Manufacturing KW - Digital Factory Y1 - 2018 ER - TY - GEN A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Stuja, Kemajl A1 - Wölfel, Walter T1 - Different safety certifiable concepts for mobile robots in industrial environments KW - Saftey KW - Robotics Y1 - 2020 ER - TY - JOUR A1 - Aburaia, Mohamed A1 - Stuja, Kemajl A1 - Markl, Erich T1 - Design and control of 4 axis additive manufactured robot using software tools JF - Procedia Engineering 100 KW - Robotics Y1 - ER - TY - CHAP A1 - Aburaia, Mohamed T1 - A Low-cost mini Robot Manipulator for Education purpose T2 - Proceedings Austrian Robotics Workshop 2015 KW - Robot KW - Education Y1 - 2020 ER - TY - JOUR A1 - Aburaia, Mohamed T1 - Digitale Fabrik JF - So funktioniert Wirtschaft. Ein Sachbuch für Jugendliche KW - Digital Factory KW - Automation Y1 - 2018 ER - TY - CHAP A1 - Werner, Andrea A1 - Leonhartsberger, Kurt A1 - Schidler, Susanne A1 - Galhaup, Michael T1 - Innovation durch Kompetenzerweiterung – Der Nutzen des kooperativen Innovationslehrganges “smart(D)ER” für Unternehmen im Tätigkeitsfeld der dezentralen erneuerbaren Energiesysteme T2 - Tagungsband 12 Forschungsforum der Österreichischen Fachhochschulen 2018 KW - Wind Power KW - Renewable Energy Y1 - ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Premm, C. A1 - Schidler, Susanne A1 - Werner, Andrea A1 - Moisl, F. T1 - Analyse der Wirtschaftlichkeit eines dezentral organisierten PV-Heimspeichernetzwerks für netz- und systemdienliche Anwendungen KW - Photovoltaics KW - Renewable Energy KW - Energy Storage Y1 - ER - TY - GEN A1 - Werner, Andrea A1 - Becker, Gernot T1 - Innovation durch Kompetenzerweiterung – Der Nutzen des kooperativen Innovationslehrganges “smart(D)ER” für Unternehmen im Tätigkeitsfeld der dezentralen erneuerbaren Energiesysteme KW - Training KW - Energy System Y1 - ER - TY - GEN A1 - Stuja, Kemajl A1 - Poszvek, Günther A1 - Wölfel, Walter A1 - Markl, Erich T1 - Integrated Method for the Design and Evaluation of Safety & Secure Manufacturing Systems KW - Saftey KW - Robotics Y1 - 2020 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Illich, Peter A1 - Werner, Andrea A1 - Schidler, Susanne T1 - Community Storage Projects in private and commercial multi-party buildings KW - Energy Storage KW - Community KW - Energy Supply Y1 - ER - TY - GEN A1 - Radinger, Thomas A1 - Stuja, Kemajl A1 - Wölfel, Walter A1 - Markl, Erich T1 - Functional Safety concept for a Handling Robot Built on Optical Systems KW - Robotics KW - Safety KW - Optical Systems Y1 - 2018 ER - TY - GEN A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Radinger, Thomas A1 - Stuja, Kemajl T1 - Development of a safety industry 4.0 production environment KW - Industry 4.0 KW - Safety Y1 - 2018 ER - TY - GEN A1 - Stuja, Kemajl T1 - ABB RobotStudio: Roboter-Software und Anwendungen KW - Robotics Y1 - ER - TY - JOUR A1 - Korhonen, Elina A1 - Werner, Andrea A1 - Kutnar, Andreja A1 - Toppinen, Anne A1 - Lähtinen, Katja T1 - Communicating forest sector sustainability: results from four European countries JF - Forest Products Journal N2 - Communication is an important tool in maintaining legitimacy and acceptability of forest sector operations and activities, and expectations by the general public on the forest sector conduct in Europe are in general very high. Despite this, there is scarce research in cross-national contexts on how forest sector sustainability is communicated to the general public and what development areas can be identified in terms of communication content. This study applies a qualitative content analysis in four forestry-rich European countries (Austria, Finland, Germany, and Slovenia). The state of online communication of 61 companies and 19 industry associations was qualitatively analyzed in 2014 with a focus on eight core sustainability topics of interest that were identified via an international forest sector stakeholder feedback process. Our results show some great similarities, but also some interesting differences in terms of communication frequency and weight of hot topics across countries. The most frequently communicated area was economic contribution of forests (in Finland and Austria), followed by debate over forest conservation versus production (Germany) and the concept-added value of wood (in Slovenia). With the exception of Slovenia, the role of forests in combating global warming was emphasized more frequently within industry associations than among individual forest industry companies. Characteristically, current content of sustainability communicatio n focuses on supplying factual information. Thus, there is a need for developing more targeted and bidirectional forms of stakeholder communication in the future, emphasizing also more active use of social media channels and empowering organizations to promote interactive communication and collaborative learning. KW - Forest Science KW - Sustainability Y1 - ER - TY - JOUR A1 - Ettwein, Frederike A1 - Rohrer-Vanzo, Valentina A1 - Langthaler, Georg A1 - Werner, Andrea A1 - Stern, Tobias A1 - Moser, Olivia A1 - Leitner, Raimund A1 - Regenfelder, Katja T1 - Consumer’s perception of high gloss furniture: instrumental gloss measurement versus visual gloss evaluation JF - European Journal of Wood and Wood Products N2 - The overall impression of a glossy surface is an important parameter for consumer’s choice of wooden products. A new gloss parameter, called gloss impression, which calculates a reflexion structure image, was developed in order to complement the measurements made by industrial glossmeters, which are highly limited in describing the visual human perception, for example the commonly used gloss value. The objective of this study is to investigate to what extent the new measurement method of surface gloss is applicable to describe human gloss perception, in other words, to validate the new method. In order to analyse the concordance of the new methodology with human perception, 113 naïve observers had to rank the glossiness of eight series of black and white samples. The results were compared to both gloss impression and gloss value. The statistical evaluation by means of Pearson’s chi-squared tests revealed that the new method has an overall better correspondence to human perception than the gloss value. For black samples, it describes human perception significantly better than the gloss value and gives better results than those which would be achieved by guessing. KW - Perception KW - Wood Products Y1 - IS - 75 SP - 1009 EP - 1016 ER - TY - JOUR A1 - List, Julia A1 - Schwarzbauer, Peter A1 - Braun, Martin A1 - Werner, Andrea A1 - Langthaler, Georg A1 - Stern, Tobias T1 - Naive wood-supply predictions: Comparing two case studies from Austria JF - Austrian Journal Of Forest Science N2 - Forest owner associations act as middlemen in the cooperative marketing of timber: they are supplied with small and fluctuating quantities of timber and sell bundled amounts to industrial consumers. Knowledge of the future quantity of monthly dis-tributable timber is of particular importance for planning, but remains a subject of uncertainty. This work presents models to predict wood supply based on a simple database. Models were tested in two case-study regions, which substantially differ Seite 88 J. List, P. Schwarzbauer, M. Braun, A. Werner, G. Langthaler, T. Sternin framework conditions for timber marketing. In each of the regions in Styria and Burgenland, different model types and subtypes were superior. It was concluded that models which determine timber supply in one forest association, are only restrictedly suitable to predict timber supply in another one. KW - Forest Science KW - Case Study Y1 - VL - 2016 IS - 2 SP - 87 EP - 110 ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Meisel, Markus A1 - Pichler, Mario A1 - Schidler, Susanne A1 - Fotiadis, Lampros A1 - Xypolytou, Evangelia A1 - Werner, Andrea T1 - System relevant Applications for Battery Storage Systems T2 - Proceedings of the 33rd PLEA International Conference "Design to Thrive" KW - Battery Storage Y1 - 2018 SP - 4595 EP - 4602 ER - TY - CHAP A1 - Schidler, Susanne A1 - Werner, Andrea A1 - Leonhartsberger, Kurt T1 - Stromspeicher und Ökologie – eine Frage der Definition. Zukunft der Gebäude - digital-dezentral- ökologisch T2 - E-Nova 2017 SCIENCE. RESEARCH. PANNONIA KW - Energy Source KW - Building KW - Ecology Y1 - ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Meisel, Markus A1 - Pichler, Mario A1 - Schidler, Susanne A1 - Fotiadis, Lampros A1 - Xypolytou, Evangelia A1 - Werner, Andrea T1 - System relevant Applications for Battery Storage Systems KW - Battery Storage Y1 - 2018 ER - TY - GEN A1 - Schidler, Susanne A1 - Werner, Andrea A1 - Leonhartsberger, Kurt T1 - Stromspeicher und Ökologie - Eine Frage der Definition? KW - Energy Storage KW - Ecology Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Schidler, Susanne A1 - Werner, Andrea T1 - Innovation Training smart(D)ER KW - Training KW - Innovation Y1 - 2018 ER - TY - JOUR A1 - Haydn, Annemarie A1 - Werner, Andrea A1 - Stern, Tobias T1 - Assessing the potential price range for bioactive food additives from wood by using the van Wesstendorp method JF - Journal of the Austrian Society of Agricultural Economics N2 - Plant-based food additives in functional foods can improve consumer’s nutrient uptake and promote optimal health effects. Considering the ongoing development of new technologies for extracting bioactive substances the potential pricing of these substances plays a major role in assessing the overall profitability of new technologies. The study therefore assessed potential prices for not yet commercially existing bioactive substances from wood by carrying out a business-to-businesssurvey. Applying the van Westendorp method the study identified a potential price in context of varying product properties like different health claims or increasing purities. The Indifference Price of 101.5 €/kg can be considered as a guide value to assess the overall profitability. The study identified potential price ranges for such products and provided information that can be used for according pricing strategies. © 2014, OGA-Osterreichische Gesellschaft fur Agrarokonomie. KW - Additives KW - Wood Y1 - IS - 24 ER - TY - CHAP A1 - Schidler, Susanne A1 - Adensam, A. A1 - Büchsenmeister, Richard A1 - Jandl, Robert A1 - Volk, B. T1 - Nachhaltigkeitskriterien bei der Standortwahl von Biomasse(Heiz)Kraftwerken T2 - Endbericht, Bundesforschungs- und Ausbildungszentrum für Wald Naturgefahren und Landschaft, Wien KW - Sustainability KW - Biomass Y1 - 2019 ER - TY - CHAP A1 - Markis, Alexandra A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Rathmair, Michael A1 - Sattinger, Vinzenz A1 - Brandstötter, Mathias T1 - Safety of Mobile Robot Systems in Industrial Applications T2 - Proceedings of the Joint ARW & OAGM Workshop 2019 KW - Robotics KW - Sensor Technology Y1 - ER - TY - CHAP A1 - Hübl, Stefan A1 - Peppoloni, Mauro A1 - Leonhartsberger, Kurt A1 - Hirschl, Alexander T1 - Assessment of the Impact of a Low-Rise Flat Roofed Building on Ambient Wind Conditions T2 - Wind Energy Exploitation in Urban Environment KW - Wind Energy KW - Wind Conditions KW - Roof Y1 - PB - Springer CY - Trento ER - TY - CHAP A1 - Hirschl, Alexander A1 - Peppoloni, Mauro A1 - Leonhartsberger, Kurt T1 - Evaluation of the Causes of Vibration and Oscillation in a Vertical Axis Small Wind Turbine (VASWT) and Its Reduction T2 - Wind Energy Exploitation in Urban Environment KW - Wind Energy Y1 - PB - Springer CY - Trento ER - TY - BOOK A1 - Eder, Gabriele C. A1 - Maul, Lukas A1 - Illich, Peter A1 - Folkerts, Wiep T1 - Report IEA-PVPS T15-05: 2018BIPV research teams & BIPV R&D facilities KW - Photovoltaics KW - Mapping KW - Solar Power Y1 - SN - 978-3-906042-74-9 ER - TY - CHAP A1 - Hirschl, Alexander A1 - Stortecky, Sebastian A1 - Schidler, Susanne A1 - Leonhartsberger, Kurt T1 - Umweltbilanz gebäudemontierter Kleinwindkraftanlagen T2 - 11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019 KW - Small Wind Plant KW - Wind Power Y1 - ER - TY - CHAP A1 - Pichler, Mario A1 - Meisel, Markus A1 - Goranovic, Andrija A1 - Leonhartsberger, Kurt T1 - Decentralized Energy Networks based on Blockchain: Background, Overview and Concept Discussion T2 - Proceeding BSCT 2018: 1st Workshop on Blockchain and Smart Contract Technologies N2 - This paper provides a snapshot of the globally ongoing decentralization of (business) relations in the energy sector. This tendency can be observed in other domains as well and is accompanied by new digital technological developments. Blockchain technology is assigned disruptive potential when it comes to realize those decentralization ideas. This hype about Blockchain is mainly company-driven without a solid academic basis yet. The authors are currently involved in several research efforts for utilizing distributed energy resources like photovoltaic systems, batteries and electric cars for the setup of energy communities and marketplaces. The paper, therefore, presents detailed investigations of background and motivations for decentralization and the building of (local) energy communities and (peer-to-peer) marketplaces for sustainable utilization of renewable energies. An overview of recent related Blockchain-based works is presented, and the current state and feasibility for the realization of the envisioned decentralized solutions are discussed. In this way, the work aimed at contributing to a research-based decision foundation for upcoming Blockchain-based decentralization efforts. KW - Energy Network KW - Blockchain Y1 - ER - TY - RPRT A1 - Zelger, Thomas A1 - Kerschbaum, E. A1 - Figl, H. A1 - Huemer-Kals, V. A1 - Gutmann, R. A1 - Gruber, E. A1 - Schneider, U. A1 - Obermayer, J. A1 - Fürst, B. A1 - Dürk, N. A1 - Kloiber, K. A1 - Ornetzeder, M. A1 - Capari, L. T1 - Way2Smart Korneuburg: Start Up in eine sozial verträgliche, energieautonome Smart City KW - Smart City KW - Korneuburg Y1 - ER - TY - RPRT A1 - Berghold, Heimo A1 - Gangoly, H. A1 - Reisenhofer, G. A1 - Zelger, Thomas A1 - Heisinger, F. T1 - Smart City Leoben: Stela – Smart Tower Enhancement Leoben Austria Endbericht KW - Smart City KW - Enhancement KW - Leoben Y1 - ER - TY - GEN A1 - Schmid, Judith A1 - Wagner, Daniela T1 - Entrepreneurial Orientation in Design Thinking – A Chance for the Tourism & Hospitality Industry? KW - Design Y1 - ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - SPIN.OFF – SPeicherINtegration in das Büro(OFFice)gebäude FutureBase KW - Storage Y1 - ER - TY - CHAP A1 - Krym, Tomasz A1 - Poniszewska-Maranda, Aneta A1 - Markl, Erich T1 - Automatic process of continuous integration of web application T2 - Intelligent Networking and Collaborative Systems 2018 N2 - Cloud solutions in the business are nowadays becoming more and more popular. Many companies decide to deploy their applications in the cloud or migrate them from their non-cloud based solutions. It allows them to focus on functionalities and turn over the work connected with setting up and managing an infrastructure (with its issues such as scalability or availability) to the cloud providers. This paper provides an in-depth analysis of cloud solutions in aspects of distributed business services. It is supported by a web application that is responsible for testing the provided services to supports the analysis. KW - Software Testing KW - Automation KW - Web Application KW - Java Y1 - ER - TY - JOUR A1 - Fairbrother, Andrew A1 - Boyd, Matthew A1 - Lyu, Yadong A1 - Avenet, Julien A1 - Illich, Peter A1 - Wang, Yu A1 - Kempe, Michael A1 - Dougherty, Brian A1 - Bruckman, Laura A1 - Gu, Xiaohong T1 - Differential degradation patterns of photovoltaic backsheets at the array level JF - Solar Energy KW - Photovoltaics KW - Degradation KW - Field Survey KW - Solar Power Y1 - VL - 2018 IS - 163 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Die Rolle von PV in lokalen und regionalen Energiesystemen und –communities KW - Photovoltaics Y1 - ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Die Mitwirkung von KundInnen an Batteriespeichernetzwerken KW - Network KW - Electricity KW - Battery Storage Y1 - ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Flexibilitätsoptionen in Privathaushalten. Viktor Kaplan Lectures KW - Flexibility KW - Household KW - Power Supply Y1 - ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - awarenESS – Machbarkeit von Gemeinschaftsspeichern KW - Energy Storage KW - Community Storage Y1 - ER - TY - CHAP A1 - Eder, C. A1 - Voronko, Yuliya A1 - Dimitriadis, Simon A1 - Knöbl, Karl A1 - Ujvári, Gusztáv A1 - Berger, Karl A. A1 - Halwachs, Martin A1 - Neumaier, Lukas A1 - Hirschl, Christina T1 - Influence of variable climatic stress conditions on performance and material degradation of PV-modules T2 - SOPHIA PV-Reliability Workshop 2018, Ljubljana KW - Photovoltaics KW - Degradation Y1 - ER - TY - CHAP A1 - Eder, Gabriele C. A1 - Voronko, Yuliya A1 - Dimitriadis, Simon A1 - Knöbl, Karl A1 - Ujvári, Gusztáv A1 - Berger, Karl A. A1 - Neumaier, Lukas T1 - Climate Specific Accelerated Ageing Tests & Evaluation of Ageing Induced Electrical, Physical and Chemical Changes T2 - 35th EU PVSEC 2018 5DO.7.4 KW - Photovoltaics KW - Degradation Y1 - ER - TY - CHAP A1 - Poniszewska-Maranda, Aneta A1 - Ignaczewski, Bartosz A1 - Markl, Erich ED - Younas, Muhammad ED - Awan, Irfan ED - Ghinea, George ED - Catalan Cid, Marisa T1 - Towards the Cloud solutions in aspects of Distributed Business Services T2 - Mobile Web and Intelligent Information Systems KW - Cloud Solutions KW - Distributed Business Services Y1 - SN - 0302-9743 ER - TY - CHAP A1 - Durakbasa, Numan A1 - Poszvek, Günther A1 - Bas, Gokcen A1 - Bauer, Jorge Martin T1 - Developments in precision engineering: high precision metrology applications to improve efficiency and quality T2 - XXI IMEKOO World Congress - Full Papers", 1 (2015) KW - Precision Engineering Y1 - ER - TY - GEN A1 - Poniszewska-Maranda, Aneta A1 - Ignaczewski, Bartosz A1 - Markl, Erich T1 - Towards the Cloud solutions in aspects of Distributed Business Services KW - Cloud Solutions KW - Distributed Business Services Y1 - ER - TY - GEN A1 - Krym, Tomasz A1 - Poniszewska-Maranda, Aneta A1 - Markl, Erich T1 - Automatic process of continuous integration of web application KW - Software Testing KW - Automation KW - Web Application KW - Java Y1 - ER - TY - RPRT A1 - Biermayr, Peter A1 - Dißauer, Christa A1 - Eberl, Manuela A1 - Enigl, Monika A1 - Fechner, Hubert A1 - Leonhartsberger, Kurt A1 - Maringer, Florian A1 - Moidl, Stefan A1 - Schmidl, Christoph A1 - Strasser, Christoph A1 - Weiss, Werner A1 - Wonisch, Patrick A1 - Wopienka, Elisabeth T1 - Innovative Energietechnologien in Österreich - Marktentwicklung 2016 KW - Energy Technologies KW - Energy Market KW - Austria Y1 - 2018 ER - TY - BOOK A1 - Huemer-Kals, V. A1 - Zelger, Thomas A1 - Leibold, Jens A1 - Fellner, M. A1 - Kleboth, Andreas A1 - Granzow, I. A1 - Storch, A. A1 - Schieder, W. A1 - Fleischhacker, A. T1 - Smart City MIKROQUARTIERE - Energie- und lebensqualitätsoptimierte Planung und Modernisierung von Smart City-Quartieren KW - Smart City Y1 - ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Hirschl, Alexander A1 - Peppoloni, Mauro T1 - Evaluierung des Direktnutzungsanteils von Kleinwindenergieanlagen (KWEA) für unterschiedliche Standorte, Anlagen und Verbrauchergruppen T2 - e-nova 2017: Zukunft der Gebäude digital - dezentral - ökologisch KW - Wind Power KW - Energy Source KW - Small Wind Power Y1 - ER - TY - CHAP A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Stuja, Kemajl A1 - Wölfel, Walter T1 - Different safety certifiable concepts for mobile robots in industrial environments T2 - 29TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION KW - Mobile Robot KW - Safety Ring KW - Safe Navigation KW - Aware Environment KW - Safe Sensor Y1 - 2020 ER - TY - GEN A1 - Leibold, Jens A1 - Zelger, Thomas T1 - Projekt SC- Mikroquartiere - Modellierung verschiedener Nachverdichtungsszenarien und Optimierung bezüglich erneuerbarer Energieversorgung und der Lebensqualität der NutzerInnen KW - Renewable Energy Y1 - 2018 ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro A1 - Schidler, Susanne T1 - Abschätzung des Potenzials dezentraler PV-Heimspeichersysteme zum Ausgleich von Fahrplanabweichungen T2 - 10. Energiewirtschaftstagung an der TU Wien KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Schidler, Susanne T1 - Green Jobs und der Stellenwert grüner Qualifizierungen in Österreich KW - Training KW - Education KW - Green Energy Y1 - 2018 ER - TY - GEN A1 - Zelger, Thomas A1 - Leibold, Jens A1 - Huemer-Kals, V. T1 - Smart City Micro Quarters KW - Smart City Y1 - ER - TY - GEN A1 - Eder, Gabriele C. A1 - Knöbl, Karl A1 - Maul, Lukas A1 - Berger, Karl T1 - Designed BIPV-elements with printed front-glass: Simulation and experimental evaluation of the effect of printing on the electrical performance KW - Photovoltaics KW - Glass Printing Y1 - 2018 ER - TY - GEN A1 - Fotiadis, Lampros A1 - Meisel, Markus A1 - Xypolytou, Evangelia A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro A1 - Maul, Lukas T1 - Predicting Energy Demands of Buildings: Office Building Case Study KW - Buildings KW - Energy Consumption Y1 - 2018 ER - TY - GEN A1 - Eder, Gabriele C. A1 - Grillberger, Paul A1 - Voronko, Yuliya A1 - Knöbl, Karl T1 - UV-Fluorescence measurements as tool for the detection of degradation effects in PV-modules KW - Photovoltaics KW - Degradation Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro A1 - Schidler, Susanne T1 - Abschätzung des Potenzials dezentraler PV-Heimspeichersysteme zum Ausgleich von Fahrplanabweichungen KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Moisl, Fabian A1 - Lettner, Georg A1 - Leonhartsberger, Kurt T1 - MBS+ | Entwicklung eines dezentral organisierten Kleinspeicher-Netzwerks zum Ausgleich von Fahrplanabweichungen KW - Energy Storage KW - Storage Network Y1 - 2018 ER - TY - GEN A1 - Eder, C. A1 - Gabriele, C. A1 - Knöbl, Karl A1 - Maul, Lukas A1 - Aichinger, Martin A1 - Peharz, Gerhard A1 - Nemitz, Wolfgang A1 - Berger, Karl A. T1 - Designed BIPV-elements with printed front-glass: Simulation und experimental evaluation of the effect of printing on the electrical performance T2 - 33th PV-SEC, Amsterdam KW - Photovoltaics KW - Design Y1 - ER - TY - CHAP A1 - Moisl, Fabian A1 - Pichler, Mario A1 - Chasparis, Georgios C. A1 - Leonhartsberger, Kurt A1 - Lettner, Georg T1 - Development of a Decentralized Small Battery Energy Storage Network to Compensate for Schedule Deviations T2 - NEIS 2017: Conference on Sustainable Energy Supply and Energy Storage Systems KW - Battery Storage KW - Energy Storage Y1 - 2018 ER - TY - GEN A1 - Hirschl, Alexander A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro T1 - Evaluierung des Direktnutzungsanteils von Kleinwindenergieanlagen (KWEA) KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Hirschl, Alexander A1 - Peppoloni, Mauro A1 - Leonhartsberger, Kurt T1 - Environmental Influences on SWT - Vibrations and Oscillations KW - Small Wind Plant KW - Wind Power KW - Environmental Influences Y1 - 2018 ER - TY - GEN A1 - Hirschl, Alexander T1 - Evaluation of the influencing quantities of oscillations and vibrations of small-wind-turbines (SWT) and its reduction KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Peppoloni, Mauro A1 - Hirschl, Alexander A1 - Leonhartsberger, Kurt T1 - Operational behaviour of building mounted small wind turbines KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Analyse des Potentials dezentraler PV-Heimspeichersysteme zum Ausgleich von Fahrplanabweichungen KW - Photovoltaics KW - Energy Storage Y1 - 2018 ER - TY - GEN A1 - Hirschl, Alexander T1 - Evaluation of the self-consumpation rate of small wind turbines (SWT) KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - CHAP A1 - Eder, C. A1 - Gabriele, C. A1 - Knöbl, Karl A1 - Maul, Lukas A1 - Aichinger, Martin A1 - Peharz, Gerhard A1 - Nemitz, Wolfgang A1 - Berger, Karl A. T1 - Designed BIPV-elements with printed front-glass: Simulation und experimental evaluation of the effect of printing on the electrical performance T2 - Advanced Building Skins, Bern ISBN: 978-3-9524883-1-7 KW - Photovoltaics KW - Design Y1 - SP - 1295 EP - 1303 ER - TY - CHAP A1 - Eder, Gabriele C. A1 - Grillberger, Paul A1 - Voronko, Yuliya A1 - Kubitschek, Bernhard A1 - Knöbl, Karl T1 - UV-Fluorescence measurements as tool for the detection of degradation effects in PV-modules T2 - Proceedings of the European Weathering Symposium EWS KW - Photovoltaics KW - Degradation Y1 - ER - TY - JOUR A1 - Molin, Andreas A1 - Schneider, Simon A1 - Rohdin, Patrik A1 - Moshfegh, Bahram T1 - Assessing a regional building applied PV potential – Spatial and dynamic analysis of supply and load matching JF - Renewable Energy 91 KW - Renewable Energy KW - Photovoltaics Y1 - VL - 2016 IS - 91 SP - 261 EP - 274 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Speicherrevolution managen: Wie können private Kleinspeicher ins Stromsystem integriert werden? KW - Energy Storage KW - Power Supply Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Flexibilitätsoptionen von Kleinspeichern: Möglichkeiten, Kundenwunsch und Wirtschaftlichkeit KW - Energy Storage Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Kleinwindkraft in Österreich - Status Quo und Entwicklungspotential KW - Small Wind Plant KW - Wind Power KW - Austria Y1 - 2018 ER - TY - GEN A1 - Peppoloni, Mauro T1 - Ursache und Wirkung - Forschung als Schlüssel zum Erfolg! KW - Wind Power KW - Small Wind Plant Y1 - 2018 ER - TY - GEN A1 - Fechner, Hubert T1 - Multitalente Speicher - Aktuelle Entwicklungen bei Energiespeichern KW - Energy Storage Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Small Wind Power in Austria KW - Small Wind Plant KW - Wind Power KW - Austria Y1 - 2018 ER - TY - CHAP A1 - Schöny, Michael A1 - Schidler, Susanne T1 - eNNOVATION - Kompetenzerweiterung im Bereich der smarten Energiespeichertechnologien/-systeme: Innovationen & Know-How-Transfer T2 - Proceedings des Forschungsforum 2016 der österreichischen Fachhochschulen KW - Energy Storage KW - Energy System KW - Knowledge Transfer Y1 - 2018 ER - TY - GEN A1 - Schöny, Michael A1 - Schidler, Susanne T1 - eNNOVATION - Kompetenzerweiterung im Bereich der smarten Energiespeichertechnologien/-systeme: Innovationen & Know-How-Transfer KW - Energy Storage KW - Knowledge Transfer KW - Energy System Y1 - 2018 ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro A1 - Schidler, Susanne T1 - Dezentrale Solarstromspeicher - Geförderter sinnvoller Beitrag zur Energiewende? T2 - Proceedings des Internationalen Kongresses e-nova 2016 KW - Solar Power KW - Energy Transition Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro A1 - Schidler, Susanne T1 - Dezentrale Solarstromspeicher - Geförderter sinnvoller Beitrag zur Energiewende? KW - Solar Power KW - Energy Transition Y1 - 2018 ER - TY - GEN A1 - Peppoloni, Mauro A1 - Leonhartsberger, Kurt T1 - Environmental Influences on SWT - Vibrations KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - CHAP A1 - Peppoloni, Mauro A1 - Hirschl, Alexander A1 - Leonhartsberger, Kurt T1 - Messtechnische Evaluierung der Umweltwirkungen von Kleinwindenergieanlagen - Vibrationen und Schwingungen T2 - Proceedings des Internationalen Kongresses e-nova 2016 KW - Wind Power KW - Measuring KW - Environmental Effects Y1 - 2018 ER - TY - GEN A1 - Peppoloni, Mauro A1 - Hirschl, Alexander A1 - Leonhartsberger, Kurt T1 - Messtechnische Evaluierung der Umweltwirkungen von Kleinwindenergieanlagen - Vibrationen und Schwingungen KW - Wind Power KW - Measuring KW - Environmental Effects Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - MBS+ | Entwicklung eines dezentral organisierten Kleinspeicher-Netzwerks zum Ausgleich von Fahrplanabweichungen KW - Energy Storage KW - Power Supply Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Ausgleich von Fahrplanabweichungen einer Bilanzgruppe durch dezentrale Erzeuger und Speichersysteme KW - Energy Storage KW - Power Supply Y1 - 2018 ER - TY - GEN A1 - Fechner, Hubert T1 - Energiewende - Vision für Energieverbrauch und Energieeffizienz in KMUs KW - Energy Transition KW - Energy Consumption KW - Energy Efficiency KW - SME Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Austrian R&D activities in the field of small wind power KW - Small Wind Plant KW - Wind Power KW - Austria Y1 - 2018 ER - TY - GEN A1 - Hirschl, Alexander T1 - Schwingungen bei Kleinwindanlagen KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Peppoloni, Mauro T1 - Innovative Technologien KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Aichinger, Martin A1 - Maul, Lukas A1 - Knöbl, Karl A1 - Peharz, Gerhard A1 - Nemitz, Wolfgang A1 - Eder, Gabriele C. A1 - Berger, Karl A. T1 - Farbgestaltung von BIPV-Elementen durch Bedruckung der Front-Gläser : Simulation und Messung des Einflusses des Bedruckungsgrades KW - Photovoltaics KW - Design Y1 - ER - TY - CHAP A1 - Eder, Gabriele C. A1 - Voronko, Yuliya A1 - Kubitschek, Bernhard A1 - Knöbl, Karl T1 - Fluorescence Spectroscopy and Imaging on aged polymeric PV Encapsulantes T2 - 20th European Symposium on Polymer Sprectroscopy 09/2016 Dresden DOI: 10.13140/RG.2.2.20827.36648 KW - Photovoltaics KW - Degradation Y1 - ER - TY - GEN A1 - Maul, Lukas A1 - Knöbl, Karl T1 - Bauwerksintegrierte Photovoltaik "IEA PVPS Task 15 - Enabling Framework for the Acceleration of BIPV - Die Photovoltaik als Element unserer bebauten Umwelt" KW - Photovoltaics KW - Environment Y1 - 2018 ER - TY - CHAP A1 - Eder, Gabriele C. A1 - Voronko, Yuliya A1 - Kubitschek, Bernhard A1 - Knöbl, Karl T1 - Fluorescence Spectroscopy and Imaging on aged polymeric PV Encapsulantes T2 - Poster - Österreichische PV-Tagung Villach 11/2016 KW - Photovoltaics KW - Degradation Y1 - ER - TY - GEN A1 - Fechner, Hubert T1 - Aktuelle Windkraftentwicklungen aus dem Blickwinkel der Wissenschaft KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Urbane Windenergie - Chancen und Herausforderungen KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Fechner, Hubert T1 - Photovoltaik Technologie-Roadmap Österreich KW - Photovoltaics KW - Austria Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Kleinwindkraft in Österreich KW - Small Wind Plant KW - Wind Power KW - Austria Y1 - 2018 ER - TY - GEN A1 - Illich, Peter T1 - IEA PVPS Task 15 KW - Photovoltaics Y1 - 2018 ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Schidler, Susanne A1 - Teppner, Renate A1 - Auer, Markus A1 - Baumann-Stanzer, Kathrin T1 - Urbane Windenergie – Chancen und Herausforderungen T2 - Proceedings of Internationaler Kongress e-nova 2015 - Nachhaltige Gebäude KW - Wind Power KW - Urban Energy Generation Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Maul, Lukas T1 - Energieversorger als Backup Provider? Erkenntnisse aus aktuellen internationalen Speicher-Studien. Smart Grids Week, 13. Mai 2016, Linz KW - Smart Grids Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Schidler, Susanne A1 - Teppner, Renate A1 - Auer, Markus A1 - Baumann-Stanzer, Kathrin T1 - Urbane Windenergie – Chancen und Herausforderungen. KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Small Wind Power in Austria. World Summit for Small Wind – New Opportunities for Small Wind: The Global Shift Towards 100% Renewables, KW - Wind Power KW - Small Wind Plant Y1 - 2018 ER - TY - GEN A1 - Maul, Lukas T1 - Ergebnisse der Evaluierungsstudie Salzburg: Stellschrauben für die Qulitätsverbesserung von Energieausweisen KW - Energy KW - Evaluation KW - Salzburg Y1 - 2018 ER - TY - RPRT A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro T1 - Small Wind Power in Austria KW - Wind Power KW - Austria Y1 - 2018 ER - TY - GEN A1 - Maul, Lukas T1 - Bauwerksintegrierte Photovoltaik – Technologie, Entwicklung, Herausforderung KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Schidler, Susanne T1 - BIOconSOLAR – Ein Nachhaltigkeitsassessment KW - Sustainability Y1 - ER - TY - GEN A1 - Durakbasa, Numan A1 - Poszvek, Günther A1 - Gokcen, Bas A1 - Bauer, Jorge Martin T1 - Developments in precision engineering: high precision metrology applications to improve efficiency and quality KW - Precision Engineering Y1 - ER - TY - JOUR A1 - Fechner, Hubert A1 - Maul, Lukas T1 - Wie im Jahr 2025 zwei Millionen Menschen in Wien leben werden – Überlegungen zum Gebäude der Zukunft JF - Zukunft Stadt. Wirtschaftspolitische Visionen für die urbanen Zentren von morgen KW - Vienna KW - Buildings Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Kleinwindkraftanlagen Qualitätssicherung, Netzeinbindung und Standortbewertung KW - Wind Power KW - Small Wind Plant Y1 - ER - TY - CHAP A1 - Grotschar, Mario A1 - Schwaiger, Robert T1 - Gesture control for an unmanned ground vehicle T2 - Proceedings of the Austrian Robotics Workshop 2015 KW - Gesture Control Y1 - ER - TY - JOUR A1 - Leonhartsberger, Kurt A1 - Peppoloni, Mauro T1 - Small Wind Power in Austria JF - World Wind Energy Association Wind Bulletin KW - Wind Power KW - Small Wind Plant Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Erfahrungen mit Normen und Standards im Bereich Kleinwindkraft. KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Nenning, Thomas T1 - Kleinwindkraft in Österreich KW - Wind Power KW - Small Wind Plant Y1 - ER - TY - GEN A1 - Grotschar, Mario A1 - Schwaiger, Robert T1 - Gesture control for an unmanned ground vehicle KW - Gesture Control Y1 - ER - TY - GEN A1 - Fechner, Hubert A1 - Leonhartsberger, Kurt T1 - IEA Aktivitäten im Bereich der Integration von PV und Wind in die öffentlichen Stromnetze KW - Smart Grids KW - Photovoltaics KW - Wind Power Y1 - ER - TY - RPRT A1 - Leonhartsberger, Kurt A1 - Renz, Kathrin T1 - Kleinwindkraftreport Österreich KW - Small Wind Plant KW - Wind Power Y1 - 2018 ER - TY - GEN A1 - Fechner, Hubert T1 - Photovoltaik und Wind verändern unser Energiesystem KW - Photovoltaics KW - Wind Power KW - Energy System Y1 - ER - TY - RPRT A1 - Fechner, Hubert T1 - Photovoltaik Technologie-Roadmap für Österreich KW - Photovoltaics KW - Austria Y1 - 2018 ER - TY - RPRT A1 - Fechner, Hubert A1 - Leonhartsberger, Kurt T1 - Berichtsteil Photovoltaik KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Leonhartsberger, Kurt T1 - Chancen und Herausforderungen Urbaner Windenergie KW - Wind Power Y1 - ER - TY - GEN A1 - Fechner, Hubert T1 - The Smart Grid Innovation Process in Austria KW - Smart Grids Y1 - ER - TY - GEN A1 - Knöbl, Karl T1 - Smart Grid Research Infrastructures in Austria KW - Smart Grids Y1 - ER - TY - BOOK A1 - Knöbl, Karl T1 - Erneuerbare Energie aus Photovoltaikanlagen: Technische, organisatorische und rechtliche Herausforderungen bei vermehrter Integration in das elektrische Verteilnetz KW - Photovoltaics Y1 - 2019 ER - TY - RPRT A1 - Biermayr, Peter A1 - Ehrig, Rita A1 - Weiss, Werner A1 - Prüggler, Natalie A1 - Fechner, Hubert T1 - Innovative Energietechnologien in Österreich - Marktentwicklung 2010 KW - Energy Technology KW - Market Development Y1 - 2019 ER - TY - JOUR A1 - Prüggler, Natalie A1 - Prüggler, Wolfgang A1 - Wirl, Franz T1 - Storage and Demand Side Management as power generator’s strategic instruments to influence demand and prices JF - Energy KW - Energy KW - Storage Y1 - 2019 IS - Vol. 36 SP - 6308 EP - 6317 ER - TY - CHAP A1 - Ghaemi, Sara A1 - Schneider, Simon T1 - Potential analysis of residential Demand Response using GridLAB-D T2 - IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society KW - Potential Analysis Y1 - SP - 8039 EP - 8045 ER - TY - GEN A1 - Prüggler, Natalie T1 - ECONOMIC POTENTIAL OF DEMAND RESPONSE AT HOUSEHOLD LEVEL – ARE CENTRAL-EUROPEAN MARKET CONDITIONS SUFFICIENT? KW - Market KW - Household KW - Economy Y1 - 2019 ER - TY - CHAP A1 - Grotschar, Mario A1 - Kraupp, Michael T1 - Augmenting a mobile Austrobotics-Platform with sensors for USAR T2 - Proceedings of the Austrian Robotics Workshop 2014 KW - Austrobotics-Platform Y1 - ER - TY - JOUR A1 - Prüggler, Natalie A1 - Bremberger, Christoph T1 - Grid regulation in Austria: smart grids incentives or disincentives? JF - E & I ELEKTROTECHNIK UND INFORMATIONSTECHNIK KW - Smart Grids Y1 - 2019 IS - Vol 128, 10 SP - 336 EP - 341 ER - TY - GEN A1 - Leonhartsberger, Kurt A1 - Nenning, Thomas T1 - Speichersysteme – Welcher Speicher für welches Einsatzgebiet KW - Energy Storage Y1 - ER - TY - GEN A1 - Grotschar, Mario A1 - Kraupp, Michael T1 - Augmenting a mobile Austrobotics-Platform with sensors for USAR KW - Austrobotics-Platform Y1 - ER - TY - JOUR A1 - Schidler, Susanne A1 - Adensam, Heidi A1 - Da Rocha, K. T1 - Berufliche Qualifizierung im Umweltsektor mit Schwerpunkt Erneuerbare Energien / Neue Energietechnologien unter antizipierender Berücksichtigung des Nationalen Qualifikationsrahmens (NQR). Schwerpunkt: Integration von Nachhaltigkeitsaspekten JF - AMS Foschungsnetz / AMS INFO 160 / Arbeitsmarktservice Österreich KW - Professional Qualification KW - Environment KW - Renewable Energy Y1 - 2019 ER - TY - JOUR A1 - Deluca, Marco A1 - Bermejo Moratinos, Raúl A1 - Grünbichler, Hannes A1 - Pressler, Volker A1 - Danzer, Robert A1 - Nickel, Klaus G. T1 - Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics JF - Scripta materialia KW - Materials Y1 - 2019 IS - 63(2) SP - 343 EP - 346 ER - TY - CHAP A1 - Stifter, Matthias A1 - Schidler, Susanne A1 - Kathan, Johannes A1 - Adensam, Heidi A1 - Rimpler, H. A1 - Greger, Dieter T1 - Photovoltaik-Vanadium Redox Flow Speichersysteme zur Stabilisierung von Niederspannungsverteilnetzen und Analyse ihrer Nachhaltigkeit T2 - Proceedings of EnInnov, Graz (Österreich) KW - Photovoltaics Y1 - 2019 ER - TY - JOUR A1 - Schidler, Susanne A1 - Adensam, Heidi A1 - Da Rocha, K. T1 - Zur Integration von Nachhaltigkeitsaspekten bei beruflichen Qualifizierungsmaßnahmen im Umweltsektor. Ergebnisse einer aktuellen Studie des AMS Österreich JF - AMS info / Arbeitsmarktservice Österreich KW - Professional Qualification KW - Environment KW - Sustainability Y1 - 2019 ER - TY - CHAP A1 - Machart, Jürgen A1 - Paulesich, Reinhard F. A1 - Schidler, Susanne T1 - Nachhaltigkeitstechnologien und Risikokapital, EASEY Venture Capital Transfer T2 - Berichte aus Energie- und Umweltforschung, BMVIT, Wien KW - Sustainability KW - Technology KW - Venture Capital Y1 - 2019 ER - TY - GEN A1 - Geley, R. A1 - Stuer, N. A1 - Schidler, Susanne A1 - Franz, Peter T1 - Nachhaltige Biomassenutzung in Heizkraftwerken T2 - Mitteleuropäische Biomassekonferenz, Graz KW - Biomass Y1 - 2019 ER - TY - JOUR A1 - Prüggler, Natalie T1 - A cost-based approach to evaluate future grid structure options JF - International Journal of Distributed Energy Resources KW - Grid Y1 - 2019 ER - TY - CHAP A1 - Ambrosch, Roland T1 - Fahrerlose Flurförderzeuge / Einsatz bildverarbeitende Systeme T2 - Taschenbuch Robotik – Montage – Handhabung KW - Robotics Y1 - 2019 PB - Fachbuchverlag Leipzig im Carl Hanser Verlag CY - München ER - TY - CHAP A1 - Malisa, Viktorio T1 - Ein Beitrag zu der Standardisierung des Mechatronik-Studiums T2 - Internationales Forum Mechatronik, Winterthur KW - Mechatronic KW - Teaching Y1 - 2019 ER - TY - CHAP A1 - Fechner, Hubert A1 - Bründlinger, C. A1 - Mayr-Braun, C. A1 - Ogimoto, K. A1 - Frederiksen, K. A1 - Kropski, B. A1 - Graditi, G. A1 - MacGill, F. A1 - Turcotte, D. A1 - Perret, L. T1 - Bringing Together International Research On High Penetration Photovoltaics In Electricity Grids – The New Task 14 Of The IEA-Photovoltaic Power Systems Programme T2 - 25th PV World Conference / Valencia (Spain) KW - Photovoltaics Y1 - 2019 ER - TY - RPRT A1 - Biermayr, Peter A1 - Ehrig, Rita A1 - Strasser, Christoph A1 - Wörgetter, Manfred A1 - Prüggler, Natalie A1 - Fechner, Hubert A1 - Nurschinger, Markus A1 - Eberl, Manuela T1 - Innovative Energietechnologien in Österreich Marktentwicklung 2009 Biomasse, Photovoltaik, Solarthermie und Wärmepumpen KW - Energy Technology KW - Market Development Y1 - 2019 ER - TY - CHAP A1 - Prüggler, Natalie A1 - Bremberger, Christoph T1 - A regulatory innovation incentive for alternative grid structure design options T2 - In Proceedings / 20th USAEE IAEE North American Conference / Energy and the Environment: Conventional and Unconventional Solutions, Calgary (Canada) KW - Smart Grids Y1 - 2019 ER - TY - CHAP A1 - Fechner, Hubert A1 - Lugmaier, Andreas T1 - Nationale Technologieplattform Smart Grids Austria – intelligente Stromnetze für die zukünftige Energieversorgung T2 - e&i KW - Smart Grids KW - Energy Supply Y1 - 2019 ER - TY - CHAP A1 - Fechner, Hubert A1 - López-Polo, Assun T1 - Photovoltaik Technologie Roadmap Österreich T2 - 11.Symposium Energieinnovation, TU Graz (Steiermark) KW - Photovoltaics Y1 - 2019 ER - TY - JOUR A1 - Schidler, Susanne A1 - Jandl, Robert A1 - Büchsenmeister, Richard T1 - Praktikable Kriterien objektivieren JF - Forstzeitung KW - Sustainability Y1 - 2019 IS - 120(9) ER - TY - CHAP A1 - Fechner, Hubert A1 - Brunner, Helfried T1 - Smart Grid Roadmap For Austria T2 - CIRED Workshop, Lyon (France) KW - Smart Grids Y1 - 2019 ER - TY - CHAP A1 - Hieger, Christof T1 - Steuerung von Industrierobotern / Humanoide Roboter KW - Robotics Y1 - 2019 SP - 156 EP - 159 PB - Fachbuchverlag Leipzig im Carl Hanser Verlag ER - TY - JOUR A1 - Schidler, Susanne T1 - Nachhaltige Entwicklung – Beispiele aus dem Bereich Erneuerbare Rohstoffe / Energien JF - AMS Forschungsnetzwerk / Arbeitsmarktservice Österreich, Abt. Arbeitsmarktforschung und Berufsinformation / AMS INFO KW - Sustainability KW - Renewable Energy KW - Renewable Raw Materials Y1 - 2019 ER - TY - CHAP A1 - Fechner, Hubert A1 - Watt, Greg T1 - Photovoltaic market and industry trends – latest results from the IEA PVPS Program T2 - e&i KW - Photovoltaics Y1 - 2019 ER - TY - CHAP A1 - Fechner, Hubert T1 - High Penetration Photovoltaics in Electricity Grids T2 - Invited lecture at 45th IEEE-International Conference on Microelectronics, Devices and Materials, Postojna (Slovenia) KW - Photovoltaics Y1 - 2019 ER - TY - CHAP A1 - Fechner, Hubert T1 - Direkte Solartechnologien als besondere Chance für Österreichs Wirtschaft T2 - e&i KW - Solar Technology Y1 - 2019 ER - TY - JOUR A1 - Bhat, Karthik Subramanya A1 - Ganglbauer, Johanna A1 - Bosch, Elina T1 - Techno–economic simulation and evaluation of scalable ‘energy cells’ locally generating renewable energy JF - e & i Elektrotechnik und Informationstechnik N2 - The ERA-Net SES project Regional Renewable Energy Cells (R2EC) [1] aims at developing a scalable system for decentralized, interacting ‘energy cells’ with a high concentration of locally generated renewable energy. ‘Energy cells’ are essentially Renewable Energy Communities (ECs) in the European context. The system aims at maximizing the utilization of locally generated renewable energy through Electrical Storage (ES) as well as high-electric applications like e‑heating, Heat Pumps (HPs), and E‑Vehicles (EVs). The system is also designed to interact with other energy cells locally, thus, improving the utilization of locally generated energy. A variety of different adjacent energy cells in three countries, Austria (AT), Belgium (BE), and Norway (NO), are analyzed, and the results are used for the development of regional and renewable energy cell systems. This approach aims at developing tailor-made solutions that meet the different local and regional requirements and the electrical energy demand of the observed energy cells. A unique opportunity is created, as the three countries are at varying levels of regional development in the field of energy communities, and the regional requirements and conditions differ significantly. A comprehensive investigation of the technical and economic viability of the ECs in the three regions is conducted on a simulation level. The technical simulation results show an increased self-consumption of individual users and the overall cell in all of the observed testbeds, while the economic analysis shows economic benefits at varying levels in each of the observed testbeds. The implemented R2EC system ascertains both technical and economic viability in the observed testbeds. KW - Energy Cells KW - Renewable energy KW - Energy Communities KW - Self-consumption Y1 - IS - 139 SP - 612 EP - 620 ER - TY - JOUR A1 - Lang, Moritz T1 - The mechanism of scale-invariance JF - Automatica N2 - A system is invariant with respect to an input transformation if we can transform any dynamic input by this function and obtain the same output dynamics after adjusting the initial conditions appropriately. Often, the set of all such input transformations forms a Lie group, the most prominent examples being scale-invariant (, ) and translational-invariant () systems, the latter comprising linear systems with transfer function zeros at the origin. Here, we derive a necessary and sufficient normal form for invariant systems and, by analyzing this normal form, provide a complete characterization of the mechanism by which invariance can be achieved. In this normal form, all invariant systems (i) estimate the applied input transformation by means of an integral feedback, and (ii) then apply the inverse of this estimate to the input before processing it in any other way. We demonstrate our results based on three examples: a scale-invariant “feed-forward loop”, a bistable switch, and a system resembling the core of the mammalian circadian network. KW - Invariant systems KW - Normal form KW - Adaptive systems KW - Transmission zeros Y1 - VL - 140 IS - June 2022 ER - TY - CHAP A1 - Lugmaier, Andreas A1 - Brunner, Helfried A1 - Prüggler, Wolfgang A1 - Glück, Natalie A1 - Kupzog, Friederich A1 - Fechner, Hubert A1 - Tauschek, Ursula A1 - Rieder, Thomas A1 - Derler, Karl A1 - Mühlberger, Thomas T1 - RoadmapSmart Grids Austria Der Weg in die Zukunft der elektrischen Stromnetze!Pathway to the future of electrical power grids! T2 - FEEI – Fachverband der Elektro- und Elektronikindustrie / Österreichs E-Wirtschaft KW - Smart Grids Y1 - 2019 ER - TY - JOUR A1 - Kubinger, Wilfried A1 - Peschak, Bernhard A1 - Wöber, Wilfried A1 - Sulz, Clemens T1 - Bildgebende Sensorsystems für robotische Systeme in der Agrar- und Landtechnik JF - e&i Elektrotechnik und Informationstechnik KW - Sensor KW - Robotics KW - Agriculture Y1 - 2018 VL - 134 IS - 6 SP - 316 EP - 322 ER - TY - JOUR A1 - Hagauer, Josef A1 - Matlschweiger, Ulrich A1 - Tippelreither, Christian A1 - Lutz, Markus A1 - Hribernig, Thomas A1 - Lackner, Maximilian T1 - Controlling Metal Fires through Cellulose Flake Blanketing Followed by Water Spray Cooling JF - Fire N2 - The traditional methods of fighting metal fires are not always safe for firefighters. The sand and salts that are thrown onto the fire to suffocate the flames can lead to splashes of molten metal, putting the firefighters and the surroundings at risk. A novel process is described where magnesium fires are brought under control using a simple two-step process. First, coated cellulose flakes, which contain approx. 30% inorganic salts, are blown onto the fire from a distance of several meters. Due to its low bulk density, the material settles smoothly on the fire and immediately covers the flames for several seconds. Before the hot metal can break through this cover, a fine water spray is applied to the fire. The water spray wets the top layer of the cellulose flakes, which will begin to char from the bottom. The water evaporates from within the cellulose flake layer and withdraws heat. It was observed that no hydrogen is formed and that this technique can safely control fires. It is judged that 90 kg of flakes could safely bring a pile of 75 kg of burning Mg flakes under control. By using a pneumatic conveying unit for the flakes, firefighters can effectively and efficiently cover the flames from a safe distance. This novel method could be recommended to firefighters in industrial magnesium processing plants, as well as local firefighters in the vicinity of such plants. KW - magnesium fire KW - metal fire KW - suffocation Y1 - U6 - http://dx.doi.org/10.3390/fire5030083 VL - 5 IS - 3 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Kefer, Martin A1 - Kubinger, Wilfried A1 - Szuegyi, Daniel T1 - Evaluation of Daylight and Thermal Infra-Red based Detection for Platooning Vehicles T2 - Annals of DAAM for 2012 and Proceedings of the 23rd International DAAM Symposium KW - Vehicle KW - Thermal Detection Y1 - 2019 SP - 719 EP - 722 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Peschak, Bernhard A1 - Otrebski, Richard T1 - ASK: Entwicklung eines modularen Systems zur Automatisierung landwirtschaftlicher Maschinen T2 - Intelligente Systeme - Stand der Technik und neue Möglichkeiten. Lecture Notes in Informatics KW - Automation KW - Agriculture Y1 - 2018 SP - 221 EP - 224 CY - Bonn ER - TY - CHAP A1 - Tabakovic, Momir A1 - Csapo, Csilla T1 - Industry – University cooperation in the renewable energy field in south Africa- Gap analysis and enhancement proposals T2 - UNITO conference, Webinar, Universities of Tomorrow: Global, Interdisciplinary, Digitized, Sustainable, HTWG Konstanz KW - Renewable Energies Y1 - ER - TY - CHAP A1 - Steigl, D A1 - Aburaia, Mohamed A1 - Wöber, Wilfried T1 - Autonomous Grasping of Known Objects Using Depth Data and the PCA T2 - Austrian Robotics Workshop 2020 KW - Robotic KW - Autonomous KW - Grasping Y1 - 2020 ER - TY - JOUR A1 - Diler, Abdulkerim A1 - Yanar, Mete A1 - Özdemir, Veysel Fatih A1 - Aydin, Recep A1 - Kaynar, Özgür A1 - Palangi, Valiollah A1 - Lackner, Maximilian A1 - Koçyigit, Rıdvan T1 - Effects of Slaughter Age of Holstein Friesian Bulls on Meat Quality: Chemical Composition, Textural Characteristics, Sensory Attributes and Fatty Acid Profile JF - Foods N2 - This study aimed to investigate the effects of slaughter age (young vs. old), muscle type (Longissimus dorsi (LD), Gluteus medius (GM)) and fat deposits (kidney knob and channel fat, subcutaneous fat, intramuscular fat) on chemical, organoleptic, textural characteristics and fatty acid composition of Holstein Friesian bull meat. For this purpose, the carcasses of 26 Holstein Friesian bulls that had been fattened on the same private farm were assigned to two experimental groups based on their age at slaughter: a young group (YG) (average age: 17.0 ± 1.0 months old) and an old group (OG) (average age: 22.0 ± 1.0 months old). The percentage of crude protein, panel tenderness score, polyunsaturated fatty acid (PUFA) and saturated fatty acid (SFA) content, the PUFA/SFA ratio and the hypocholesterolemic fatty acid (DFA)/hypercholesterolemic fatty acid (OFA) ratio of the bull carcasses decreased significantly with increasing slaughter age. By contrast, the OFA content of the carcasses significantly increased (p < 0.05) with increasing slaughter age. Advanced slaughter age resulted in lower panel tenderness scores. Additionally, the meat of the bulls in the OG was considered to be less healthy because of the less desirable fatty acid composition and nutritional indices, such as the PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios, compared to the meat from the bulls in the YG. Furthermore, the intramuscular fat and internal fat contained high percentages of PUFA and SFA and high PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios. Interestingly, the percentage of OFA content in the internal and intramuscular fat tissues decreased with increasing slaughter age. In conclusion, this study provided evidence that slaughter age and muscle and fat type are essential sources of variations in the textural characteristics, sensory panel attributes and fatty acid profile of meat from Holstein Friesian bulls. KW - fatty acid profile KW - sensory evaluation KW - slaughter age KW - texture profile analysis Y1 - U6 - http://dx.doi.org/10.3390/foods12010158 VL - 12 IS - 1 ER - TY - JOUR A1 - Bağcık, Caner A1 - Koç, Fisun A1 - Erten, Kadir A1 - Esen, Selim A1 - Palangi, Valiollah A1 - Lackner, Maximilian T1 - Lentilactobacillus buchneri Preactivation Affects the Mitigation of Methane Emission in Corn Silage Treated with or without Urea JF - Fermentation N2 - The aim of this study was to investigate the effect of different forms of Lentilactobacillus buchneri on the in vitro methane production, fermentation characteristics, nutritional quality, and aerobic stability of corn silage treated with or without urea. The following treatments were applied prior to ensiling: (1) no urea treatment and LB; (2) no urea treatment+freeze dried LB; (3) no urea treatment+preactivated LB; (4) with urea treatment+no LB; (5) with urea treatment+freeze dried LB; (6) with urea treatment+preactivated. LB was applied at a rate of 3 × 108 cfu/kg on a fresh basis, while urea was applied at a rate of 1% on the basis of dry matter. Data measured at different time points were analyzed according to a completely randomized design, with a 2 × 3 × 5 factorial arrangement of treatments, while the others were analyzed with a 2 × 3 factorial arrangement. Preactivated LB was more effective than freeze-dried LB in reducing silage pH, ammonia nitrogen, cell-wall components, yeast count, and carbon dioxide production, as well as increasing lactic acid and residual water-soluble carbohydrate and aerobic stability (p < 0.0001). A significant reduction in the methane ratio was observed after 24 h and 48 h incubation with preactivated forms of LB (p < 0.001). The results indicated that preactivated LB combined with urea improved fermentation characteristics, nutritional quality, and aerobic stability and reduced the methane ratio of corn silages. KW - gas production KW - Lentilactobacillus buchneri KW - methane KW - silage KW - urea Y1 - U6 - http://dx.doi.org/10.3390/fermentation8120747 VL - 8 IS - 12 ER - TY - JOUR A1 - Coşkuntuna, Levend A1 - Lackner, Maximilian A1 - Erten, Kadir A1 - Gül, Sevilay A1 - Palangi, Valiollah A1 - Koç, Fisun A1 - Esen, Selim T1 - Greenhouse Gas Emission Reduction Potential of Lavender Meal and Essential Oil for Dairy Cows JF - Fermentation N2 - This research aims to evaluate the potential of lavender meal (LM) and lavender essential oil (LEO) to mitigate methane emissions by dairy cows. Locally grown lavender was collected fresh for this purpose, and its oil was extracted using the cold-press method. The resultant LEO and LM and whole lavender (WL) were added to dairy cow concentrate feed at 0%, 0.05%, and 0.10%, and their effects on vitro gas production values and gas concentrations were subsequently assessed. Out of the 30 bioactive compounds isolated from LEO, linalool and linalyl acetate were the most common—accounting for 70.4% of the total. The lavender dose had a significant influence on gas production for up to 12 h. No significant variations were found across the lavender forms when gas kinetics, in vitro degradability, and predicted energy values were compared. The addition of WL to the concentrate feed of dairy cows produced the greatest quantities of methane, carbon dioxide, and hydrogen sulfide, whereas LEO resulted in the lowest values. In contrast, no significant difference in ammonia content was found across the various lavender forms added into dairy cow concentrate feed. The results of this research suggest that adding 0.05–0.10% LM and LEO to concentrate feed may decrease greenhouse gas emissions from dairy cows. KW - lavender KW - byproduct KW - essential oil KW - methane Y1 - U6 - http://dx.doi.org/10.3390/fermentation9030253 VL - 9 IS - 3 ER - TY - CHAP A1 - Valckenborg, Roland A1 - Berger, Karl A. A1 - Újvári, Gusztáv A1 - Eder, Gabriele C. A1 - Gaisberger, Lukas A1 - Tabakovic, Momir A1 - Polo Lopez, Christina S. A1 - Boddaert, Simon A1 - del Buono, Matteo A1 - Martín Chivelet, Nuria A1 - Sanz Martinez, Asier A1 - Kim, Jun-Tae A1 - Gerd Imenes, Anne T1 - COMPARISON OF IEC 61853-1 MATRIX EVALUATIONS BASED ON INDOOR AND OUTDOOR MEASUREMENT DATA FROM PVPS TASK 15 BIPV ROUND-ROBIN T2 - 38th European Photovoltaic Solar Energy Conference Proceedings, September 6-10, 2021 KW - Measurement Y1 - ER - TY - GEN A1 - Bucher, Christoph Michael A1 - Aburaia, Mohamed A1 - Markl, Erich A1 - Engelhardt-Nowitzki, Corinna A1 - Lackner, Maximilian A1 - Gonzales-Gutierrez, J. A1 - Lammer, Helmuth T1 - Continuous fiber reinforced freeform 3D printing KW - Additive Manufacturing Y1 - ER - TY - JOUR A1 - Markl, Erich A1 - Lackner, Maximilian T1 - Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review JF - Materials N2 - In general, composite materials are difficult to recycle. Tires belong to this class of materials. On top, one of their main constitutents, vulcanized rubber, is as elastomer, which cannot be remolten and hence is particularly challenging to put to a new use. Today, the main end-of-life routes of tires and other rubber products are landfilling, incineration in e.g., cement plants, and grinding to a fine powder, generating huge quantities and indicating a lack of sustainable recycling of this valuable material. True feedstock recycling is not feasible for complex mixtures such as tires, but devulcanization can be done to reactivate the cross-linked polymer for material recycling in novel rubber products. Devulcanization, i.e., the breaking up of sulfur bonds by chemical, thermophysical, or biological means, is a promising route that has been investigated for more than 50 years. This review article presents an update on the state-of-the art in rubber devulcanization. The article addresses established devulcanization technologies and novel processes described in the scientific and patent literatures. On the one hand, tires have become high-tech products, where the simultaneous improvement of wet traction, rolling resistance, and abrasion resistance (the so-called “magic triangle”) is hard to achieve. On the other hand, recycling and sustainable end-of-life uses are becoming more and more important. It is expected that the public discussion of environmental impacts of thermoplastics will soon spill over to thermosets and elastomers. Therefore, the industry needs to develop and market solutions proactively. Every year, approximately 40 million tons of tires are discarded. Through the devulcanization of end-of-life tires (ELT), it is possible to produce new raw materials with good mechanical properties and a superior environmental footprint over virgin products. The devulcanization process has become an interesting technology that is able to support the circular economy concept. KW - rubber devulcanization KW - sustainability KW - recycling Y1 - U6 - http://dx.doi.org/10.3390/ma13051246 VL - 13 IS - 5 ER - TY - JOUR A1 - Besharati, Maghsoud A1 - Palangi, Valiollah A1 - Niazifar, Masoumeh A1 - Esen, Selim A1 - Lackner, Maximilian T1 - A Comprehensive Analysis of Cinnamon, Flaxseed, and Lemon Seed Essential Oils’ Effects on In Vitro Gas Formation and Nutrient Degradability in Diets JF - Fermentation N2 - This study aimed to assess the impact of essential oils (EOs) on in vitro gas formation and the degradability of dairy and beef cattle diets. This study also aimed to investigate the effects of different types of EOs on nutrient utilization and rumen microbial activity. The current study was conducted using a fully randomized design consisting of eight experimental treatments, including two control treatments without any additives, and treatments with cinnamon essential oil (CEO), flaxseed essential oil (FEO), and lemon seed essential oil (LEO) at a concentration of 60 mg/kg fresh mass. Two control treatments were used, one with alfalfa silage and dairy concentrate (DC, CON-DC) and the other with alfalfa silage and fattening concentrate (FC, CON-FC). Gas formation, dry matter (DM) digestibility, crude protein (CP) digestibility, effective degradability (ED), and soluble fractions of DM and organic matter (OM) were evaluated. CEO had a substantial effect on gas formation (p < 0.05). When EOs were added to the diets, they increased dry matter digestibility after 24 h of incubation as compared to control treatments. After 24 h of incubation, FCCEO and FCFEO had the highest CP digestibility among the diets. FCLEO considerably enhanced ED, as well as the soluble fraction of DM (a) at a passage rate of 2% per hour. Treatment with FCCEO resulted in a significant increase in soluble fractions compared to the control diets. At a passage rate of 2% h, DCCEO had the maximum ED value. When EOs were introduced to the diet, they dramatically decreased the insoluble portion of CP (b). Compared to the control treatments, gas production was significantly lower in the presence of LEO (FCLEO; p < 0.05). The addition of EOs to cattle diets may increase nutrient utilization and enhance rumen microbial activity. EOs extracted from lemon seeds (at a dose of 60 mg/kg of diet) lowered gas production in both dairy cattle and fattening diets. KW - Digestibility KW - cinnamon essential oil KW - lemon seed essential oil Y1 - U6 - http://dx.doi.org/10.3390/fermentation9060504 VL - 9 IS - 6 ER - TY - JOUR A1 - Palangi, Valiollah A1 - Taghizadeh, Akbar A1 - Abachi, Soheila A1 - Lackner, Maximilian T1 - Strategies to Mitigate Enteric Methane Emissions in Ruminants: A Review JF - Sustainability N2 - Methane is the main greenhouse gas (GHG) emitted by ruminants. Mitigation strategies are required to alleviate this negative environmental impact while maintaining productivity and ruminants’ health. To date, numerous methane mitigation strategies have been investigated, reported and suggested by scientists to the livestock industry. In this review, the authors will focus on the commonly practiced and available techniques expanding the knowledge of the reader on the advances of methane mitigation strategies with a focus on the recent literature. Furthermore, the authors will attempt to discuss the drawbacks of the strategies in terms of animal health and performance reduction as well as the concept of feed and energy loss, adding an economic perspective to methane emission mitigation which is in the farmers’ direct interest. As a whole, many factors are effective in reducing undesired methane production, but this is definitely a complex challenge. Conclusively, further research is required to offer effective and efficient methane production mitigation solutions in ruminants worldwide, thus positively contributing to climate change. KW - greenhouse gas (GHG) KW - ruminal microorganism KW - methane emission Y1 - U6 - http://dx.doi.org/10.3390/su142013229 VL - Vol. 14 IS - Issue 20 ER - TY - JOUR A1 - Mokhtarzadeh, Shakir A1 - Nobakht, Ali A1 - Mehmannavaz, Yousef A1 - Palangi, Valiollah A1 - Eseceli, Hüseyin A1 - Lackner, Maximilian T1 - Impacts of Continuous and Intermittent Use of Bovine Colostrum on Laying Japanese Quails: Egg Performance and Traits, Blood Biochemical and Antioxidant Status JF - Animals N2 - Quail is used in cookery, but mainly for its egg production around the globe, and sustainable poultry farming practices have been searched. The use of colostrum (beestings or first milk from cows) in quails’ diet can play an important role in providing probiotics and reducing the need for antibiotics, which, in addition to better quail performance, is effective in reducing environmental impacts. The results of the current research show that the continuous use of bovine colostrum (BC) in laying quails’ diets has beneficial effects on their performance, egg traits, blood indexes and antioxidant status. KW - antioxidant KW - blood parameters KW - carcass characteristics KW - egg traits Y1 - U6 - http://dx.doi.org/10.3390/ani12202811 VL - 12 IS - Issue 20 ER - TY - JOUR A1 - Palangi, Valiollah A1 - Lackner, Maximilian T1 - Management of Enteric Methane Emissions in Ruminants Using Feed Additives: A Review JF - Animals N2 - Methane emission from enteric fermentation in ruminants is the single most relevant greenhouse gas source in agriculture, and it is amongst the largest anthropogenic ones. As ruminants are needed globally for meat, milk and other goods production on a huge scale, feed additives could offer an interesting solution to reduce CH4 emissions. Methane emission strategies are investigated to maintaining productivity and the overall health of the animal. Some strategies have shown to reduce the propagation and/or eliminate ruminal flora affecting the health and productivity of the animal. Therefore, identifying beneficial strategies leads to improving productivity and the health of the animal and environment. KW - greenhouse gas KW - methane emission KW - ruminants Y1 - U6 - http://dx.doi.org/10.3390/ani12243452 VL - 12 IS - 24 ER - TY - GEN A1 - Tabakovic, Momir T1 - EU-ASCIN - Projektpräsentation KW - Smart City Y1 - ER - TY - JOUR A1 - Wöber, Wilfried A1 - Rauer, Johannes A1 - Papa, Maximilian A1 - Aburaia, Ali A1 - Schwaiger, Simon A1 - Novotny, Georg A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried T1 - Evaluierung von Navigationsmethoden für mobile Roboter JF - e & i Elektrotechnik und Informationstechnik KW - Robotics KW - Machine Learning KW - Industry 4.0 Y1 - 2020 ER - TY - CHAP A1 - Schneider, Simon A1 - Zelger, Thomas A1 - Tabakovic, Momir T1 - State of play and future of small-town urban buildings guided by an energy-autonomy vision statement: consumption, calculation and potential embedded in Smart City Demo Way2Smart T2 - BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress für zukunftsfähiges Bauen KW - Smart City KW - Energy Y1 - SP - 62 EP - 66 ER - TY - GEN A1 - Kamravamanesh, Donya A1 - Pflügl, Stefan A1 - Lackner, Maximilian A1 - Herwig, Christoph T1 - Enhancing PHB Production in Synechocystis sp. PCC 6714 by means of Process Engineering and Multivariate Design of Experiments KW - PHB KW - Bacteria KW - Process Engineering Y1 - 2018 ER - TY - CHAP A1 - Schwaiger, Simon A1 - Aburaia, Mohamed A1 - Aburaia, Ali A1 - Wöber, Wilfried T1 - Explainable Artificial Intelligence for Robot Arm Control T2 - Proceedings of the 32nd International DAAAM Virtual Symposium `Intelligent Manufacturing & Automation`, 28-29th October 2021, Vienna KW - Artificial Intelligence KW - Machine Learning Y1 - VL - 32 IS - 1 SP - 0640 EP - 0647 ER - TY - CHAP A1 - Lackner, Maximilian A1 - Markl, Erich A1 - Aburaia, Mohamed T1 - Cybersecurity Management for (Industrial) Internet of Things: Challenges and Opportunities T2 - Journal of Information Technology & Software Engineering Keywords KW - Security Y1 - ER - TY - RPRT A1 - Tabakovic, Momir A1 - Fechner, Hubert A1 - Leonhartsberger, Kurt T1 - National Survey Report of PV Power Applications in Austria 2016 KW - Photovoltaics KW - Austria Y1 - 2018 ER - TY - RPRT A1 - Tabakovic, Momir A1 - Fechner, Hubert A1 - Leonhartsberger, Kurt T1 - National Survey Report of PV Power Applications in Austria 2015 KW - Photovoltaics KW - Austria Y1 - 2018 ER - TY - JOUR A1 - Schneider, Simon A1 - Bartlmä, Nadja A1 - Leibold, Jens A1 - Schöfmann, Petra A1 - Tabakovic, Momir A1 - Zelger, Thomas T1 - New Assessment Method for Buildings and Districts towards "Net Zero Energy Buildings" Compatible with the Energy Scenario 2050 JF - REAL CORP 2019 KW - Renewable Energies KW - Buildings Y1 - IS - April 2019 ER - TY - GEN A1 - Tabakovic, Momir A1 - Schneider, Simon A1 - Laurent, Pierre A1 - Zelger, Thomas A1 - Kerschbaum, Elisabeth A1 - Figl, Hildegrund T1 - Korneuburgs way2smart – mobility concept, energy platform and social interaction KW - Energy Supply KW - Korneuburg KW - Building Y1 - ER - TY - CHAP A1 - Kriegler, Andreas A1 - Wöber, Wilfried A1 - Aburaia, Mohamed T1 - Artificial Neural Networks Based Place Categorization T2 - Digital Conversion on the Way to Industry 4.0 KW - Artificial Intelligence Y1 - SP - 201 EP - 209 PB - Springer Verlag ER - TY - GEN A1 - Lackner, Maximilian T1 - PHA - Biopolymere mit Potential KW - Bioplastics KW - Biopolymers Y1 - 2020 ER - TY - JOUR A1 - Stadler, Philipp A1 - Blöschl, Günter A1 - Vogl, Wolfgang A1 - Koschelnik, Juri A1 - Epp, Markus, A1 - Lackner, Maximilian A1 - Oismüller, Markus A1 - Kumpan, Monika A1 - Nemeth, Lukas, A1 - Strauss, Peter A1 - Sommer, Regina A1 - Ryzinska-Paier, Gabriela A1 - Farnleitner, Andras A1 - Zessner, Matthias T1 - Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams: A comparison of prototypes JF - Real-time monitoring of beta-D-glucuronidase activity in sediment laden streams KW - Enzymes KW - Water quality Y1 - 2018 ER - TY - JOUR A1 - Lackner, Maximilian A1 - Lutz, Markus A1 - Hribernig, Thomas T1 - Neuartiges Verfahren zum Löschen von Metallbränden mit Zelluloseflakes JF - Feuerwehr Fachjournal KW - Extinguisher KW - Cellulose Y1 - IS - September 2021 SP - 54 ER - TY - BOOK A1 - Wala, Thomas A1 - Ellinger, Florian A1 - Franz, Peter A1 - Kriz, Agnes A1 - Zangl, Sabine A1 - Sohm, Kurt A1 - Tabakovic, Momir A1 - Gollner, Helmut A1 - Adams, Mark A1 - Litzenberger, Stefan T1 - Internationalisierung von Fachhochschulstudiengängen.: Ideen, Konzepte & Erfahrungsberichte KW - Internationalisation Y1 - SN - ISBN-13 : ‎979-8650872184 PB - Independently Published ER - TY - JOUR A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed A1 - Otrebski, Richard A1 - Rauer, Johannes A1 - Orsolits, Horst T1 - Research-based teaching in Digital Manufacturing and Robotics – the Digital Factory at the UAS Technikum Wien as a Case Example JF - Procedia Manufacturing KW - Digital Factory KW - Virtual Reality KW - Robotics KW - Machine Learning Y1 - 2020 IS - Volume 45 SP - 164 EP - 170 ER - TY - JOUR A1 - Aburaia, Mohamed A1 - Bucher, Christoph A1 - Lackner, Maximilian A1 - Gonzalez-Gutierrez, Joamin A1 - Zhang, Haiguang A1 - Lammer, Herfried T1 - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament JF - Biomaterials and Medical Applications KW - Filament KW - Production Y1 - 2020 ER - TY - CHAP A1 - Felber, Stefan Otto A1 - Aburaia, Mohamed A1 - Wöber, Wilfried A1 - Lackner, Maximilian T1 - Parameter Optimization for the 3D Print of Thermo-Plastic Pellets with an Industrial Robot T2 - Digital Conversion on the Way to Industry 4.0 KW - Thermo Plastics KW - Industrial Robot Y1 - SP - 236 EP - 247 ER - TY - JOUR A1 - Rauer, Johannes A1 - Aburaia, Mohamed A1 - Wöber, Wilfried T1 - Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Graspin JF - Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020 KW - Robotics KW - Neural Networks Y1 - 2020 SP - 2 EP - 3 ER - TY - CHAP A1 - Abdank, Moritz A1 - Aburaia, Mohamed A1 - Wöber, Wilfried T1 - Using-Colour-Based Object Detection for Pick and Place Applications T2 - Proceedings of the 32nd International DAAAM Virtual Symposium 'Intelligent Manufacturing & Automation', 28-29th October 2021, Vienna KW - Computer Vision KW - Object Detection KW - ROS Y1 - VL - 32 IS - 1 SP - 0536 EP - 0541 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich T1 - Konferenz der Mechatronik-Plattform: Autonome mechatronische Systeme T2 - FH CAMPUS 02, 22. November 2018 Digital Manufacturing & Robotics im Department Industrial Engineering KW - Autonom KW - Mechatronic Y1 - 2020 ER - TY - CHAP A1 - Bucher, Michael A1 - Aburaia, Mohamed A1 - Markl, Erich A1 - Engelhardt-Nowitzki, Corinna A1 - Lackner, Maximilian A1 - Gonzalez-Gutierrez, Joamin A1 - Lammer, Herfried T1 - Poster Symposium on ADDitive Manufacturing and Innovative Technologies T2 - Symposium on ADDitive Manufacturing and Innovative Technologies KW - Innovative Technologies KW - ADDitive KW - Manufacturing Y1 - 2020 ER - TY - JOUR A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed A1 - Otrebski, Richard A1 - Rauer, Johannes A1 - Orsolits, Horst T1 - Research-based teaching in Digital Manufacturing and Robotics – the Digital Factory at the UAS Technikum Wien as a Case Example JF - Procedia Manuf KW - Teaching KW - Manufacturing KW - Digital Factory KW - Robotic Y1 - 2020 ER - TY - JOUR A1 - Aburaia, Mohamed A1 - Lackner, Maximilian A1 - Bucher, Michael A1 - Gonzalez-Gutierrez, Joamin A1 - Zhang, Haiguang A1 - Lammer, Herfried T1 - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament JF - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament,” vol. 4, no. 1, p. 12, 2020 KW - Production KW - Fiber KW - FFF KW - Filament Y1 - 2020 ER - TY - CHAP A1 - Werner, Jan A1 - Aburaia, Mohamed A1 - Raschendorfera, A A1 - Lackner, Maximilian T1 - MeshSlicer: A 3D-Printing software for printing 3D-models with a 6-axis industrial robot T2 - 14th CIRP, Gulf of Naples, Italy, 2020 KW - 3D KW - robot KW - Printing Y1 - 2020 ER - TY - CHAP A1 - Rauer, Johannes A1 - Aburaia, Mohamed A1 - Wöber, Wilfried T1 - Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Grasping T2 - Austrian Robotics Workshop 2020 KW - Semi-Automatic KW - Neural Network KW - Robotic KW - Grasping KW - 6D Y1 - 2020 ER - TY - CHAP A1 - Aburaia, Mohamed A1 - Lackner, Maximilian T1 - Parameter Optimization for the 3D Print of Thermo-plastic Pellets with an Industrial Robot T2 - International Symposium for Production Research 2020, Turkey KW - 3D KW - Optimization KW - Print KW - Industrial KW - Robot Y1 - 2020 ER - TY - CHAP A1 - Kainrath, Martin A1 - Aburaia, Mohamed A1 - Lackner, Maximilian T1 - Accuracy Improvement and Process Flow Adaption for Robot Machining T2 - International Symposium for Production Research 2020, Turkey KW - Robot KW - Machining KW - Improvement Y1 - 2020 ER - TY - CHAP A1 - Kefer, Martin A1 - Wöber, Wilfried A1 - Szuegyi, Daniel A1 - Kubinger, Wilfried T1 - A Novel and Automated Circle Pattern Recognition Technique for Infra-Red Stero Camera Calibration T2 - Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications KW - Pattern Recognition KW - Infra-Red Camera Y1 - 2019 SP - 404 EP - 410 ER - TY - RPRT A1 - Zelger, Thomas A1 - Fechner, Hubert A1 - Setznagel, R. A1 - Tabakovic, Momir T1 - THEBAVOL: Anwendungen und Grenzen der THErmischen BAuteilaktivierung im großVOLumigen Geschoßbau KW - Building Parts Y1 - ER - TY - CHAP A1 - Kriegler, Andreas A1 - Wöber, Wilfried T1 - Vision-based Docking of a Mobile Robot T2 - Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020 KW - Automation KW - Robotics Y1 - SP - 6 EP - 12 ER - TY - CHAP A1 - Orsolits, Horst T1 - Virtual Engineering Applied in a Digital Learning Factory T2 - Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region KW - Virtual Engineering Y1 - 2021 ER - TY - GEN A1 - Lackner, Maximilian T1 - Cyanobacteria as model organism for PHB production KW - Bacteria KW - PHB Y1 - 2018 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Supper, Georg A1 - Aschauer, Christian A1 - Gronauer, Andreas A1 - Tomic, Dana Kathrin A1 - Hörmann, Sandra T1 - Entwicklung eines auf semantischer Technologie basierenden Analysesystems zur Überwachung der Wasserversorgung von landwirtschaftlichen Nutzflächen T2 - Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexität versus Bedienbarkeit/Mensch-Maschine-Schnittstellen N2 - Eine ressourcenschonende Bewässerung von Nutzpflanzen wird durch den Klimawandel in den nächsten Jahren immer größere Bedeutung gewinnen. Eine Möglichkeit, das für Pflanzen zur Verfügung stehende Wasserpotential beurteilen zu können, ist die Nutzung von klimatischen Faktoren und Computermodellen. In diesem Beitrag wird die Entwicklung eines auf dem Forschungsprojekt agriOpenLink basierten Softwaresystems zur Abschätzung der Evapotranspiration auf einer landwirtschaftlichen Nutzfläche beschrieben. Der Fokus dieses Berichts liegt auf dem Softwareframework, welches auf semantischer Technologie basiert und formalisiertes landwirtschaftliches Wissen sowie Computermodelle zur Abschätzung der Evapotranspiration beinhaltet. Es werden erste experimentelle Ergebnisse diskutiert und die semantische Technologie bezüglich praktischer Nutzung evaluiert. KW - Semantic Modelling Y1 - 2019 ER - TY - GEN A1 - Tabakovic, Momir A1 - Schneider, Simon A1 - Laurent, Pierre A1 - Zelger, Thomas A1 - Kerschbaum, Elisabeth A1 - Figl, Hildegund T1 - Korneuburgs way2smart - mobility concept, energy platform and social interaction KW - Energy Market KW - Energy Consumption KW - Household Y1 - 2018 ER - TY - CHAP A1 - Lackner, Maximilian T1 - Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production T2 - Webinar on Biopolymers & Bioplastics, Meetings International, KW - Process Engineering KW - PHB Y1 - 2020 ER - TY - JOUR A1 - Lackner, Maximilian T1 - Industrial Engineering Management – THE key skill for the Digital Age JF - The International Journal of Engineering and Science (THE IJES) KW - Management KW - Industrial Engineering Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Fechner, Hubert A1 - van Sark, Wilfried A1 - Louwen, Atse A1 - Weiss, Ingrid A1 - Arancón, Sofia A1 - Geourghiou, George A1 - Makrides, George A1 - Hadjipanayi, Maria A1 - Loucaidou, Eliza A1 - Ioannidou, Monica T1 - Development of BIPV courseware for students and professionals T2 - Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017) KW - Education KW - Photovoltaics Y1 - 2018 SP - 2895 EP - 2899 ER - TY - GEN A1 - Tabakovic, Momir A1 - Fechner, Hubert A1 - van Sark, Wilfried A1 - Louwen, Atse A1 - Weiss, Ingrid A1 - Arancón, Sofia A1 - Geourghiou, George A1 - Makrides, George A1 - Hadjipanayi, Maria A1 - Loucaidou, Eliza A1 - Ioannidou, Monica T1 - Development of BIPV courseware for students and professionals KW - Education KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Schneider, Simon A1 - Tabakovic, Momir T1 - Aktueller Stand und Zukunft von stadteigenen Gebäuden einer Kleinstadt mit energieautonomen Leitbild: Verbrauch, Berechnung und Potential im Rahmen von Smart City Demo Way2Smart KW - Smart City Y1 - ER - TY - GEN A1 - Dannereder, Florian A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Pachschwöll, Paul Herwig A1 - Aburaia, Mohamed A1 - Shooman, Diane T1 - Development of a 3D-Printed Bionic Hand with Muscle- and Force Control KW - Robotics Y1 - ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich T1 - Digital Manufacturing & Robotics im Department Industrial Engineering T2 - KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme KW - Digital Manufacturing KW - Robotics KW - Industrial Engineering Y1 - ER - TY - GEN A1 - Tabakovic, Momir T1 - Status and outlook for building integrated photovoltaics(BIPV) in relation to educational needs in the BIPV sector KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Integrative Secondary Education Programmes and Research in Smart Cities Context KW - Smart City Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Welche Speicher und Netze braucht die Energiewende? KW - Energy Storage KW - Energy Network Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - EU-ASCIN - Projektpräsentation KW - Smart City Y1 - ER - TY - GEN A1 - Tabakovic, Momir T1 - EU-ASCIN - Projektpräsentation KW - Smart City Y1 - ER - TY - RPRT A1 - van Sark, Wilfried A1 - Louwen, Atse A1 - Geourghiou, George A1 - Makrides, George A1 - Loucaidou, Eliza A1 - Ioannidou, Monica A1 - Fechner, Hubert A1 - Tabakovic, Momir A1 - Weiss, Ingrid A1 - Arancón, Sofia T1 - Review of the BIPV market and education needs in the field - Framework and Requirements' Analysis KW - Photovoltaics KW - Energy Market KW - Education Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Smart Cities Education as Mobility, Energy & ICT Hub KW - Smart City KW - Mobility Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Smart Grids at the University AS Technikum Vienna KW - Smart Grids Y1 - 2018 ER - TY - JOUR A1 - Markl, Erich A1 - Grünbichler, Hannes A1 - Lackner, Maximilian T1 - Cyanobacteria for PHB Bioplastics Production: A Review JF - IntechOpen N2 - Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature. KW - Bio-based Plastics KW - PHB Y1 - ER - TY - JOUR A1 - Knapp, Alexander A1 - Lackner, Maximilian A1 - Markl, Erich T1 - Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning JF - International Journal of Advance Engineering and Research Development N2 - Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents. KW - Floor cleaning KW - Mechanical Action KW - Chemicals Y1 - 2018 SN - 2348-4470 SP - 84 EP - 86 ER - TY - GEN A1 - Kamravamanesh, Donya A1 - Pflügl, Stefan A1 - Lackner, Maximilian A1 - Herwig, Christoph T1 - Bioprocess Development for Sustainable poly-β-hydroxybutyrate Production KW - Bioplastics KW - PHB KW - Cyanobacteria Y1 - ER - TY - JOUR A1 - Markl, Erich A1 - Grünbichler, Hannes A1 - Lackner, Maximilian T1 - PHB - Bio Based and Biodegradable Replacement for PP: A Review JF - Novel Techniques in Nutrition and Food Science KW - Bio Degradable KW - PHB KW - Bio-based Plastics Y1 - VL - 2 IS - 2 ER - TY - BOOK A1 - de Vries, Sytse A1 - Markl, Erich A1 - Lackner, Maximilian T1 - Energy efficiency management in the shipping industry KW - Transportation KW - Energy efficiency Y1 - SN - 978 3 659 71981 3 PB - Lambert Academic Publishing ER - TY - CHAP A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Bermejo Moratinos, Raúl A1 - Supancic, Peter A1 - Danzer, Robert T1 - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios T2 - th International Conference on Smart Materials and Structures KW - Robotics Y1 - 2019 PB - Material Sci Eng 2018 (7) ER - TY - GEN A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Bermejo Moratinos, Raúl A1 - Supancic, Peter A1 - Danzer, Robert T1 - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios KW - Robotics Y1 - 2018 ER - TY - CHAP A1 - Lackner, Maximilian A1 - Zangl, Sabine A1 - Lembacher, Harald A1 - Rüttinger, Norbert A1 - Fochler, Claus T1 - Non-wovens and recycling – An overview, International Conference on Recycling and Waste Water Management T2 - International Conference on Recycling and Waste Water Management KW - Environment KW - Sustainability KW - Recycling Y1 - 2020 ER - TY - JOUR A1 - Schneider, Simon A1 - Bartlmä, Nadja A1 - Leibold, Jens A1 - Schöffmann, Petra A1 - Tabakovic, Momir A1 - Zelger, Thomas T1 - New assessment method for buildings and districts towards “Net Zero Energy Buildings" compatible with the energy scenario 2050 JF - Corp KW - Energy Technologies KW - Building Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Schneider, Simon A1 - Leibold, Jens A1 - Zelger, Thomas A1 - Bartlmä, Nadja A1 - Holzer, Peter A1 - Schöffmann, Petra T1 - Way to positive energy districts in Vienna T2 - Mission Innovation Austria KW - Energy Technologies KW - Vienna Y1 - ER - TY - CHAP A1 - Tabakovic, Momir T1 - Development and Implementation of BIPV Courseware for Higher Education and Professionals T2 - Smart Education and e-Learning KW - Education KW - E-Learning Y1 - PB - Springer ER - TY - CHAP A1 - Rauh, Sebastian A1 - Orsolits, Horst T1 - Perspectives on Virtual Reality in Higher Education for Robotics and Related Engineering Disciplines T2 - Robotics in Education (International Conference on Robotics in Education) N2 - Industrial engineering education has a strong focus on and affinity towards technology. While Virtual Reality hardware and applications advance and learning behaviour changes, it is particularly interesting to determine the possible use of Virtual Reality for teaching engineering subjects, for example fundamentals of robotics. This paper presents a study which examines the possible use of Virtual Reality learning environments at higher learning institutions. The study shows perspectives of students and lecturers and identifies opportunities and challenges for the use of Virtual Reality in industrial engineering education. The results of the indicated study show that the participants have a positive attitude towards Virtual Reality and strong motivation for in class use. The study results also suggest, that Virtual Reality content creation should be included in engineering curricula. KW - Virtual reality KW - Industrial engineering education KW - User study KW - The state of virtual reality Y1 - SN - 978-3-031-12848-6 SP - 39 EP - 51 PB - Springer ER - TY - GEN A1 - Tabakovic, Momir T1 - Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves KW - Generator KW - Energy Conversion KW - Waste Heat Y1 - ER - TY - BOOK A1 - Tabakovic, Momir T1 - Analyze and optimize the prototype of a thermoelectric generator: as an electrical renewable power source for biomass stoves KW - Biomass KW - Thermoelectrics Y1 - 2019 PB - AV Akademikerverlag ER - TY - GEN A1 - Markl, Erich A1 - Orsolits, Horst A1 - Stojicic, Dario T1 - Virtuelle Technologien in der Robotik KW - Robotics Y1 - ER - TY - GEN A1 - Tabakovic, Momir T1 - Way2Smart Korneuburg: Smart Cities Projekt KW - Smart City KW - Energy Consumption KW - Energy Storage Y1 - 2018 ER - TY - THES A1 - Tabakovic, Momir T1 - Direct conversion of waste heat into electric energy by thermoelectric generators N2 - The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber. KW - Energy Technologies KW - Renewable Energy Y1 - ER - TY - GEN A1 - Lackner, Maximilian A1 - Kamravamanesh, Donya A1 - Markl, Erich A1 - Engelhardt-Nowitzki, Corinna A1 - Herwig, Christoph T1 - Optimization of process parameters to enhance Polyhydroxyalkanoate accumulation in a unicellular cyanobacterium using multivariate experimental design approach KW - Bacteria Y1 - 2018 ER - TY - GEN A1 - Orsolits, Horst A1 - Gallasch, Andreas T1 - Make a 25 Year old Claw Crane Digital with Thingworx KW - Crane Y1 - ER - TY - GEN A1 - Orsolits, Horst T1 - Using AR to Build a Digital Twin Robotics Laboratory KW - Augmented Reality KW - Digital Twin Y1 - ER - TY - CHAP A1 - Chirita, Cristian A1 - Tabakovic, Momir T1 - Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber T2 - X International Conference Industrial Engineering and Environmental Protection KW - Generators KW - Renewable Energy Y1 - SP - 143 EP - 151 ER - TY - GEN A1 - Kamravamanesh, Donya A1 - Pflügl, Stefan A1 - Lackner, Maximilian A1 - Herwig, Christoph T1 - Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714 KW - Bacteria Y1 - 2018 ER - TY - BOOK A1 - Lackner, Maximilian T1 - Digital Conversion on the Way to Industry 4.0, Selected Papers from ISPR 2020 KW - Engineering Y1 - PB - Springer E-Book ER - TY - RPRT A1 - Orsolits, Horst A1 - Korn, Alexander T1 - Augmented Reality basierte Robotik-Lehre N2 - Diese Arbeit beschreibt eine Augmented Reality (AR) Applikation für den Einsatz in der Hochschullehre zum Thema Industrierobotik. Ziel ist es, sowohl das Lehren als auch das Lernen grundlegender Robotik-Inhalte durch die Bereitstellung einer interaktiven Methode zur Vermittlung der Lehrinhalte für Studierende zu verbessern. Die Studierenden sind in der Lage, direkt mit dem virtuellen Modell eines Industrieroboters zu interagieren und so selbstgesteuert die Lerninhalte zu vertiefen. Diese interaktive Methode verbindet die Studierenden direkt mit den Lehrinhalten und fördert das selbsterforschende Lernen. Eine weitere Anwendungsmöglichkeit sieht die Kombination einer Lektorenversion der AR Experience mit der Studierendenversion vor. Der Lektor hat die Möglichkeit, das Modell in AR zu steuern bzw. zu verändern und die Studierenden können auf Ihren Mobilgeräten die Änderungen live in AR mitverfolgen, um so auch im Distance Learning eine Verbindung Lektor – Studierende – Inhalt zusätzlich zu Videokonferenz-Tools herzustellen. KW - Augmented Reality KW - Applikation KW - Robotik KW - Industrieroboter KW - Lehre Y1 - 2022 ER - TY - GEN A1 - Tabakovic, Momir A1 - Hemis, Herbert T1 - Energieversorgungslösungen auf Quartiersebene KW - Energy Systems Y1 - ER - TY - JOUR A1 - Wagner, Isabella A1 - Lackner, Maximilian T1 - Extraction and Analysis of Natural Rubber from the Latex of Ficus carica, Artocarpus heterophyllus and Polymer Analysis of Durio zibethinus JF - Austin Journal of Biotechnology & Bioengineering N2 - In tropical fruits such as durian (Durio zibethinus) and jackfruit (Artocarpus heterophyllus), only one quarter to one third of the fruit is edible. Finding more ways to industrially use the other components of the fruit can reduce the waste burned or dumped in landfills. Another fruit tree of interest that can also grow in Austria is the fig tree (Ficus carica). Currently, the fruits are the main product of that plant; however, components in the latex of the tree are of interest too. The latex is known to contain natural rubber, which could potentially be used for industrial applications. Jackfruit trees also produce latex, which contains natural rubber. In both cases, the natural rubber has different properties compared to the conventionally used rubber from the rubber tree (Hevea brasiliensis). This could provide new opportunities in various applications. Therefore, the purpose of this research is to analyze the properties of the natural rubber obtained from the jackfruit and fig trees. Additionally, durian fruit also produces a sticky liquid, so the same experiments were also carried out with durian samples. The experimental procedure included extraction with acetone and cyclohexane as well as polymer length determination with gel permeation chromatography and polymer analysis with differential scanning calorimetry. The results show that in both jackfruit and fig tree latex, there is natural rubber of similar polymer length. Durian pulp also contains a polymer; however, with these experiments, it could not be identified. Further research is required to identify the durian polymer and to confirm the results of this experiment. KW - Extraction KW - Rubber Y1 - IS - Vol. 8 (2) ER - TY - JOUR A1 - Petrov, Timothy A1 - Neussner, Wolfgang A1 - Lackner, Maximilian T1 - Digitalization of the Process Landscape for Proprietary Bond Trading JF - Sustainable Future and Technology Development N2 - On the surface, the process landscape for fixed income securities trading within most banks has changed only slightly in the past four decades. The value chain remains divided amongst front-, middle-, and back office, with IT in support. Front office negotiates deals with customers and other banks, middle office manages risks and reporting, and back office ensures that payments are made in exchange for a transfer of the bonds that have been traded. Though these processes have gradually migrated to electronic mediums, much of the work in all functional areas remains manual. But the advent of digital technologies, primarily process automation software and data integration in an open software architecture, allows banks to dramatically change how the processes along the value chain are carried out. Repetitive and predictable tasks can be performed by automated software, allowing humans to concentrate on complex activities that require flexibility and discretion. Those tasks that remain in the hands of humans can also be made more efficient by extracting data from software applications along the entire process chain and providing them to the human user at the right point in time in the right system. KW - Digitalization KW - Process Automation Y1 - IS - Vol 3, No 6, 2021 ER - TY - CHAP A1 - Klamert-Schmid, Judith A1 - Traxler, Sabine A1 - Lackner, Maximilian T1 - The Phenomenon Of 'Opportunity Recognition' Among Engineering Student T2 - 24th International Conference on Interactive Collaborative Learning(ICL2021), 22.-24.September 2021, Dresden KW - Engineering KW - Students Y1 - CY - Dresden ER - TY - CHAP A1 - Lackner, Maximilian A1 - Novotny, Florian A. A1 - Zangl, Sabine A1 - Lembacher, Harald T1 - Contribution of waste heat to the anthropogenic greenhouse effect T2 - 2nd International Conference on Environmental Sustainability and Climate Change” KW - Sustainability KW - Environment Y1 - 2020 ER - TY - GEN A1 - Tabakovic, Momir T1 - Analysis and Optimization of a Thermoelectric Generator as an Electrical Renewable Power Source for Biomass Boilers KW - Generator KW - Renewable Energy KW - Biomass Y1 - 2018 ER - TY - JOUR A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Schmid, Judith A1 - Faast, Thomas T1 - Mutual Benefits from Entrepreneurship of Non-business University Graduates for Academia and Founders JF - International Academic Journal of Entrepreneurship N2 - There is a trend among universities to teach entrepreneurship and support startup initiatives. In this article, the state-ofthe- art in entrepreneurship higher education and university ecosystems of non-business schools is reviewed, and the example of the University of Applied Sciences Technikum Wien, Austria, and one of its startup show cases, Toolsense, is elaborated to understand critical success factors for non-business graduates as founders. The mutual benefits for universities and founders are discussed. In the case of Toolsense and the University of Applied Sciences, narrow band IoT as brought to the University by the startup. Implications on a universities’ innovation and portfolio management are highlighted. Concerning startups, the importance of growth financing after initial success is elaborated. KW - Entrepreneurship KW - Incubator KW - Startup-Business Y1 - ER - TY - CHAP A1 - Wöber, Wilfried A1 - Novotny, Georg A1 - Aburaia, Mohamed A1 - Otrebski, Richard A1 - Kubinger, Wilfried T1 - Estimating a Sparse Representation of Gaussian Processes Using Global Optimization and the Bayesian Information Criterion T2 - Austrian Robotics Workshop 2018 KW - Mobile Robotics KW - Localizations KW - Gaussian process KW - Robotics Y1 - ER - TY - CHAP A1 - Dannereder, Florian A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Pachschwöll, Paul Herwig A1 - Aburaia, Mohamed A1 - Shooman, Diane T1 - Development of a 3D-Printed Bionic Hand with Muscle- and Force Control T2 - Proceedings of the Austrian Robotics Workshop 2018 KW - Robotics Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Böckl, Benjamin A1 - Berger, Michael A. A1 - Hermis, Herbert A1 - Nauschegg, Daniel A1 - Wall, Johannes T1 - Energieversorgungslösungen auf Quartiersebene T2 - World Energy Council Austria Young Energy Professionals KW - Energy Systems Y1 - ER - TY - BOOK A1 - Orsolits, Horst A1 - Lackner, Maximilian ED - Lackner, Maximilian ED - Orsolits, Horst T1 - Virtual Reality und Augmented Reality in der Digitalen Produktion KW - Virtual Reality KW - Production KW - Augmented Reality Y1 - SN - 978-3-658-29009-2 PB - Springer Gabler ER - TY - CHAP A1 - Gonzalez-Gutierrez, Joamin A1 - Treitler, Manuel A1 - Spoerk, Martin A1 - Arbeiter, Florian A1 - Schuschnigg, Stephan A1 - Lammer, Herfried A1 - Lackner, Maximilian A1 - Aburaia, Mohamed A1 - Poszvek, Günther A1 - Zhang, Haiguang A1 - Sapkota, Janak A1 - Holzer, Clemes T1 - Carbon fiber reinforced thermoplastics for material extrusion additive manufacturing T2 - Conference proceedings of 35th International Conference of the Polymer Processing Society N2 - In an effort to broaden the engineering applications of material extrusion based additive manufacturing (MEAM), new materials are being developed. Adding carbon-fibers (CF) has been one strategy to increase the mechanical performance of different thermoplastics. One challenge is to determine the amount of CF needed to increase the mechanical performance without affecting the “printability” of the compounds. In this paper, different amounts (10, 15, and 20 vol.%) of CF were added to recycled polypropylene (rPP) and polyamide 12 (PA12). A compatibilizer was used for rPP, but not for PA12. Filaments for MEAM were extruded from the different compounds and the viscosity as well as the tensile properties were measured and compared to the processed polymeric matrices. It was observed that the viscosities at the angular frequencies relevant for MEAM (100 to 200 rad/s) were not significantly different for rPP+CF compounds, but it was higher for PA12+CF compounds. As expected, the elongation at break significantly decreased with the addition of CF for all compounds. For the composites with an rPP matrix, the Young’s modulus and the ultimate tensile strength (UTS) continuously increased as the CF content increased to 20 vol.%. For PA12-based materials, the Young’s modulus and the UTS increased with CF content, but adding more than 15 vol.% did not further improve these values. Therefore, it was concluded that for PA12 the maximum amount of CF that should be added was 15 vol.%. Using scanning electron microscopy, it was observed that the CF were homogeneously dispersed in the rPP matrix, but not so well in the PA12 matrix, with fibers being more concentrated towards the rim of the filament. Finally, filaments of rPP, rPP+20CF, PA12 and PA12+15CF were used to print complex geometries by means of MEAM, and it was observed that CF helped to reduce the warpage compared to the unfilled filaments. A potential application of this phenomenon could be the reduction of the bed temperature to develop a more energy efficient MEAM process for semi-crystalline polymers. KW - Additive Manufacturing KW - Materials Y1 - ER - TY - JOUR A1 - Klamert-Schmid, Judith A1 - Lackner, Maximilian T1 - Arbeiten und studieren im Homeoffice JF - Alle! Achtung! Das Sicherheitsmagazin der AUVA KW - Home Office Y1 - IS - 10/2021 ER - TY - CHAP A1 - Lackner, Maximilian A1 - Markl, Erich A1 - Cermak, Corinna T1 - Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail T2 - Transportation Systems Analysis and Assessment N2 - This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed. KW - Energy KW - Cargo Y1 - 2020 ER - TY - CHAP A1 - Cermak, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian T1 - Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail T2 - Transportation KW - Transportation KW - Analysis KW - Energy Efficiency Y1 - PB - Intech Open ER - TY - JOUR A1 - Zangl, Sabine A1 - Husetic, Mirza A1 - Lackner, Maximilian A1 - Lembacher, Harald T1 - Sustainability – bringing about a value changes amongst employees JF - Techniumscience KW - Sustainability Y1 - 2020 ER - TY - CHAP A1 - Rauer, Johannes A1 - Wöber, Wilfried A1 - Aburaia, Mohamed T1 - An Autonomous Mobile Handling Robot Using Object Recognition T2 - Proceedings of ARW & OAGM Workshop 2019 KW - Mobile Robotics Y1 - 2020 N1 - https://workshops.aapr.at/wp-content/uploads/2019/05/ARW-OAGM19_06.pdf ER - TY - CHAP A1 - Tabakovic, Momir A1 - Fechner, Hubert T1 - Status and outlook for building integrated photovoltaics (BIPV) in relation to educational needs in the BIPV sector T2 - Proceedings of the 8th International Conference on Sustainability in Energy and Buildings 2016 KW - Photovoltaics KW - Education Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir A1 - Fechner, Hubert T1 - Status and outlook for building integrated photovoltaics (BIPV) in relation to educational needs in the BIPV sector KW - Photovoltaics KW - Education Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Strom im Wohnbau - Die Zukunft hat begonnen KW - Buildings KW - Electricity Y1 - 2018 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich T1 - Digital Manufacturing & Robotics im Department Industrial Engineering T2 - Konferenz der Mechatronik Plattform Autonome mechatronische Systeme N2 - Digitalisierung und Automatisierung in produzierender Industrie sind Schlagwörter heutiger Forschungsbarbeiten am Department Industrial Engineering der Fachhochschule Technikum Wien. Künstliche Intelligenz, vernetzte Sensorsysteme oder übergreifende Prozessplanung ermöglichen Optimierung hinsichtlich Produktionszeit oder Fertigung von individualisierten Produkten, was zur Losgröße 1 führt. In diesem Dokument werden Forschungstätigkeiten des Departments Industrial Engineering im Kontext Vernetzung, Servicerobotik sowie Industrierobotik zusammengefasst. KW - Industrial Engineering KW - Digital Manufacturing KW - Networking KW - Robotics Y1 - 2018 SP - 20 EP - 21 ER - TY - GEN A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Aburaia, Mohamed T1 - Digital Manufacturing & Robotics im Department Industrial Engineering KW - Industrial Engineering KW - Digital Manufacturing KW - Networking KW - Robotics Y1 - ER - TY - CHAP A1 - Aburaia, Mohamed A1 - Lackner, Maximilian A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lammer, H. A1 - Zhang, Haiguang A1 - Wang, J. A1 - Sapotka, J. A1 - Janics, T. A1 - Hailberger, M. T1 - Freeform-FDM process development using natural fibre reinforced biopolymers T2 - 2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK KW - Freeform Printing KW - Additive Manufacturing Y1 - ER - TY - CHAP A1 - Dannereder, Florian A1 - Pachschwöll, Paul A1 - Aburaia, Mohamed A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Engelhardt-Nowitzki, Corinna A1 - Shooman, Diane T1 - Development of a 3D-printed Bionic Hand with Muscle- and Force Control T2 - Austrian Robotics Workshop 2018 KW - Robotics KW - Prosthetics KW - 3D-Printing Y1 - ER - TY - CHAP A1 - Schneider, Simon A1 - Zelger, Thomas A1 - Tabakovic, Momir T1 - Combining bottom-up and top-down approaches to converge heterogeneous building data into a homogenous, interactive and expandable energy autonomy platform T2 - BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress für zukunftsfähiges Bauen KW - Energy Autonomy Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - van Sark, Wilfried A1 - Louwen, Atse A1 - Weiss, Ingrid A1 - Arancon, Sofia A1 - Makrides, George A1 - Hadjipanayi, Maria A1 - Loucaidou, Eliza T1 - Development of BIPV courseware for students and professionals T2 - Proceeding: Austrian PV Conference KW - Course Material KW - Photovoltaics Y1 - ER - TY - CHAP A1 - Tabakovic, Momir T1 - Direct conversation of waste heat from solid-fuel stove into electric energy using a high temperature thermoelectric generator compared to Bi2Te3 thermoelectric generator T2 - Proceeding: ISEC 2018 KW - Energy Conversion KW - Electricity KW - Waste Heat Y1 - ER - TY - RPRT A1 - Tabakovic, Momir A1 - Fechner, Hubert A1 - Leonhartsberger, Kurt T1 - National Survey Report of PV Power Applications in Austria 2017 T2 - IEA- International Energy Agency KW - Photovoltaics KW - Survey Report Y1 - ER - TY - GEN A1 - Kamravamanesh, Donya A1 - Pflügl, Stefan A1 - Lackner, Maximilian A1 - Herwig, Christoph T1 - Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714 KW - Bacteria Y1 - 2018 ER - TY - BOOK A1 - Lackner, Maximilian A1 - Grabow, Wilhelm A1 - Stadler, Philipp T1 - Handbook of Online and Near-real-time Methods in Microbiology KW - Microbiology Y1 - 2018 ER - TY - JOUR A1 - Aaliya, Basheer A1 - Sunooj, Kappat Valiyapeediyekkal A1 - Sri Rajkumar, Chillapalli Babu A1 - Navaf, Muhammed A1 - Akhila, Plachikkattu Parambil A1 - Sudheesh, Cherakkathodi A1 - George, Johnsy A1 - Lackner, Maximilian T1 - Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments JF - Polymers N2 - Talipot starch, a non-conventional starch source with a high yield (76%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P–O–C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08%. KW - Talipot starch KW - Non-conventional starch Y1 - VL - 13 IS - 3855 ER - TY - JOUR A1 - Haas, Theodor A1 - Markl, Erich A1 - Lackner, Maximilian T1 - Innovative use of waste tyres: Noise-barriers and geoengineering JF - World Journal of Advanced Engineering Technology and Sciences KW - Engineering KW - Wastemanagement Y1 - ER - TY - GEN A1 - Lackner, Maximilian T1 - PBAT - A versatile bioplastics KW - Bioplastics Y1 - 2018 ER - TY - CHAP A1 - Tabakovic, Momir A1 - Otto, Marc-Oliver A1 - Commerell, Walter A1 - Csapo, Csilla A1 - Vermaak, Herman T1 - Increase industry cooperation in post graduate education via OpenLab’s and MobileLab’s in South Africa T2 - Smart Education and e-Learning 2020 N2 - This paper will present the concepts of the EURYDICE project funded by the Erasmus + program. Within this project the focus on renewable energies with the overall goal to enhance employability. The energy generation landscape in South Africa is undergoing a fundamental transition, as the vision of the energy strategy is to contribute to an affordable energy for all. This vision will be supported by innovative labs and portals which will be developed within this project. One of the goals is closing the gap between TVET (Technical and Vocational Education and Training Colleges) studies and diploma study by the definition of industrial experience requirements for University of Technology (UoT) diploma students. This leads to an increased preparedness and “studyability” of UoT diploma students. Industrial stakeholders will be integrated into the process. The project will develop an “Industrial Portal” as a working tool. To increase industry cooperation in post graduate education “OpenLabs” and “MobileLabs” will be developed within the project. It is intended that industry brings industrial problems into the “Labs”, which will then be solved by the students. KW - Mobile Labs KW - Employability KW - Renewable Energy Y1 - SP - 623 EP - 629 PB - Springer Verlag ER - TY - CHAP A1 - Tabakovic, Momir A1 - Würfl, Marlen A1 - Guerra, Eduardo A1 - Gutleder, Miriam T1 - Operating models for PV systems in existing residential building complexes in Vienna – challenges and opportunities T2 - XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) N2 - This paper aims to identify challenges and opportunities that are associated with installing PV (Photovoltaic) systems in existing residential building complexes in Vienna. For this purpose, a project-oriented approach was chosen and hence a representative residential building complex in Vienna was chosen and analyzed to demonstrate the challenges that are associated with such projects. Furthermore, a particular focus lies on exploring different operating models that are available when it comes to the execution of such a project. As this paper builds on the rather novel topic of exploring new operating models for installing PV systems on existing residential building complexes in Vienna, many further suggestions for research can be identified that exceed the scope of this paper. KW - Photovoltaics KW - Renewable Energy KW - Urban Areas Y1 - ER - TY - JOUR A1 - Lackner, Maximilian A1 - Ouattara, Ibrahim A1 - Gharae, Norouz Ali A1 - Abolhassani, Raymond T1 - Clean drinking water global scarcity: a review JF - Journal of Water Science and Engineering KW - Water KW - Engineering Y1 - 2020 ER - TY - CHAP A1 - Lackner, Maximilian T1 - Combination of Devulcanization and Reactive Extrusion for Value-Added Rubber Recycling T2 - Webinar on Biopolymers & Bioplastics, Meetings International, KW - Recycling Y1 - 2020 ER - TY - GEN A1 - Tabakovic, Momir T1 - International Weeks als Plattformen für länderübergreifende Zusammenarbeit KW - Internationalisation Y1 - ER - TY - JOUR A1 - Zangl, Sabine A1 - Pingitzer, D. A1 - Lembacher, Harald A1 - Lackner, Maximilian T1 - Carbon footprint reduction in households using professional services – example of laundry cleaning JF - Pubtexto KW - Sustainability Y1 - 2020 ER - TY - BOOK A1 - Orsolits, Horst A1 - Lackner, Maximilian T1 - Virtual Reality und Augmented Reality in der Digitalen Produktion KW - Virtual Reality Y1 - 2021 SN - 978-3-658-29008-5 PB - Gabler ER - TY - BOOK A1 - Lackner, Maximilian T1 - Chemical Engineering Vocabulary: Bilingual KW - Chemical Engineering KW - Language Y1 - 2018 ER - TY - CHAP A1 - Tabakovic, Momir A1 - Schneider, Simon A1 - Laurent, Pierre A1 - Zelger, Thomas A1 - Kerschbaum, Elisabeth A1 - Figl, Hildegund T1 - Korneuburgs way2smart - mobility concept, energy platform and social interaction T2 - Proceedings of the 22nd International Conference on Urban Planning, Regional Development and Information Society (REAL CORP 2017 - PANTA RHEI) KW - Energy Market KW - Energy Consumption KW - Household Y1 - 2018 ER - TY - JOUR A1 - Spitzer-Sonnleitner, Birgit A1 - Kempe, Andre A1 - Lackner, Maximilian T1 - Influence of halide solutions on collagen networks - measurements of physical properties by atomic force microscopy (AFM) JF - Influence of halide solutions on collagen networks KW - Collagen Networks KW - Microscopy Y1 - 2018 ER - TY - CHAP A1 - Bululukova, Darya A1 - Wahl, Harald T1 - Towards a Sustainable Smart Cities Integration in Teaching and Research T2 - Proceedings of the 4th International Conference on Smart Cities and Green ICT Systems - Volume 1: SMARTGREENS, 101-106, 2015, Lisbon, Portugal KW - Smart City Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Bululukova, Darya A1 - Wahl, Harald T1 - Smart Cities Education as Mobility, Energy & ICT Hub T2 - Proceedings of the 5th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS) 2016 KW - Smart City KW - Education KW - Mobility KW - Energy KW - ICT Y1 - 2018 ER - TY - JOUR A1 - Grasel, Bernhard A1 - Baptista, José A1 - Tragner, Manfred T1 - Supraharmonic and Harmonic Emissions of a Bi-Directional V2G Electric Vehicle Charging Station and Their Impact to the Grid Impedance JF - Energies N2 - Bidirectional electric vehicle supply equipment and charging stations (EVSE) offer new business models and can provide services to the electrical grid. The smart grid lab in Vienna gives unique testing possibilities of future smart grids, as different type of electrical equipment can be operated at a reconstructed, well-known distribution grid. In this work the harmonic and supraharmonic emissions of a bidirectional EVSE are measured according to IEC61000-4-7 and IEC61000-4-30 Ed3 standard as well as the high-frequency grid impedance. In addition, the efficiency and the power factor are determined at various operating points. Although THDi at nominal power (10 kW) is very low and the efficiency and power factor is very high, at low power levels the opposite situation arise. Supraharmonic emissions remain stable independent of the charging/discharging power, and both wideband and narrowband emissions occur. The additional capacitance when connecting the EVSE impacts the high-frequency grid impedance substantially and generates resonance points. KW - power quality KW - V2G KW - supraharmonics Y1 - U6 - http://dx.doi.org/10.3390/en15082920 VL - 15 IS - 8 ER - TY - GEN A1 - Illich, Peter A1 - Eder, Gabriele C. A1 - Berger, Karl A. A1 - Ujvári, Gusztáv A1 - Peharz, Gerhard A1 - Rechberger, P. A1 - Aichinger, Martin A1 - Moor, D. T1 - Ringversuch von baugleichen Glas-Glas-BIPV-Elementen unter verschiedenen Klimabedingungen – ein Beitrag Österreichs zu IEA PVPS Task 15: „Beschleunigung der Marktdurchdringung von BIPV“ KW - Photovoltaics KW - Renewable Energy Y1 - ER - TY - CHAP A1 - Leonhartsberger, Kurt A1 - Meisel, M. A1 - Picler, M. A1 - Schidler, Susanne A1 - Fotiadis, Lampros A1 - Xypolytou, E. A1 - Werner, Andrea T1 - System relevant Applications for Battery Storage Systems T2 - 33rd Passive Low Energy Architecture Conference (PLEA 2017), Edinburgh, Scotland, Proceedings Vol. III KW - Battery Storage Systems KW - Energy Storage Y1 - ER - TY - RPRT A1 - Biermayr, Peter A1 - Dißauer, Christa A1 - Eberl, Manuela A1 - Enigl, Monika A1 - Fechner, Hubert A1 - Fischer, L. A1 - Leonhartsberger, Kurt A1 - Maringer, F. A1 - Moidl, S. A1 - Schmidl, C. A1 - Strasser, C. A1 - Weiss, W. A1 - Wonisch, P. A1 - Wopienka, E. T1 - Innovative Energietechnologien in Österreich - Marktentwicklung 2018 T2 - BMVIT Schriftenreihe 04/2018 KW - Energy Technology KW - Economy KW - Market Y1 - ER - TY - CHAP A1 - Illich, Peter A1 - Eder, Gabriele C. A1 - Berger, Karl A. A1 - Ujvári, Gusztáv A1 - Rechberger, P. A1 - Moor, D. A1 - Aichinger, Martin T1 - Comparative Performance Measurements of Identical BIPV-Elements in Different Climatic Environments - A Round Robin Action within the IEA PVPS Task 15 Collaboration T2 - 35th European Photovoltaic Solar Energy Conference and Exhibition KW - Photovoltaics KW - Solar Power Y1 - SN - 3-936338-50-7 ER - TY - JOUR A1 - Zhang, Hang A1 - Yao, Yuan A1 - Ma, Yingxin A1 - Lackner, Maximilian A1 - Jiang, Yunliang T1 - A 3D printing tool-path generation strategy based on the partition of principal stress field for fused filament fabrication JF - The International Journal of Advanced Manufacturing Technology N2 - In order to enhance the strength of 3D-printed parts made of polymer materials and reduce the anisotropy caused by the fused filament fabrication process, this paper proposes an inter-layer interleaved composite path planning method based on the directional partition of the principal stress field. This method not only ensures intra-layer reinforcement under specific working conditions but also increases the strength of the printed part by enhancing the adhesion of adjacent layers through staggered filling between layers. The mechanical performance is improved by 10 to 30% compared to other conventional filling patterns such as the zigzag filling algorithm. Inter-layer interleaved composite enhancement path planning method is suitable for path planning of structures with complex shapes and is easily integrated into existing general computer-aided engineering processes. KW - Principal stress field KW - Anisotropy strength KW - Clustering Y1 - IS - 122 SP - 1719 EP - 1735 ER - TY - JOUR A1 - Wöber, Wilfried A1 - Curto, Manuel A1 - Tibihika, Papius D. A1 - Meulenboek, Paul A1 - Alemayehu, Esayas A1 - Mehnen, Lars A1 - Meimberg, Harald A1 - Sykacek, Peter T1 - Identifying geographically differentiated features of Ethopian Nile tilapia (Oreochromis niloticus) morphology with machine learning JF - PlosONE KW - Machine Learning Y1 - VL - 16 IS - 4 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Tibihika, Papius D A1 - Olaverri-Monreal, Cristina A1 - Mehnen, Lars A1 - Sykacek, Peter A1 - Meimberg, Harald T1 - Comparison of Unsupervised Learning Methods for Natural Image Processing T2 - Biodiversity Information Science and Standards KW - Machine Learning KW - Deep Learning KW - Image Processing Y1 - IS - 3 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Szuegyi, Daniel A1 - Kubinger, Wilfried A1 - Mehnen, Lars T1 - A principal component analysis based object detection for thermal infra-red images T2 - Proceedings of the 55th International Symposium ELMAR KW - Principal Component Analysis KW - Object Detection KW - Infra-Red Camera Y1 - 2019 ER - TY - GEN A1 - Spulak, David A1 - Otrebski, Richard A1 - Kubinger, Wilfried T1 - Object Tracking by Combining Supervised and Adaptive Online Learning through Sensor Fusion of Multiple Stereo Camera Systems KW - Object Tracking Y1 - ER - TY - JOUR A1 - Taghavi, Marziyeh A1 - Taghizadeh, Akbar A1 - Mehmannavaz, Yousef A1 - Hosseinkhani, Ali A1 - Mohammadzadeh, Hamid A1 - Macit, Muhlis A1 - Palangi, Valiollah A1 - Lackner, Maximilian T1 - Degradability of Vicia ervilia Grain Using In Situ and CNCPS Methods, and Model-Based Analysis of Its Ruminal Degradation JF - Fermentation N2 - Using nylon bag techniques, Cornell net carbohydrates and protein systems (CNCPS), and scanning electron microscopy, the authors examined the digestibility and structure of Vicia ervilia (ervil, bitter vetch) after steam flaking, roasting, and microwave processing. During the in situ technique, the samples were incubated at 0, 2, 4, 6, 8, 12, 16, 24, 36, and 48 h. For the description of the ruminal DM (dry matter) and CP (crude protein) degradation kinetics of treated and untreated Vicia ervilia, different models were selected as the best fit for the dry matter (DM) and crude protein (CP) degradation parameters of steam flaked samples. The results showed that both the steam flaking and microwave treatment samples contained high levels of non-protein nitrogen and buffer soluble protein, respectively. In comparison with steam flaking and microwave treatment, roasting decreased and increased the buffer soluble protein and neutral detergent insoluble protein, respectively. The control treatments showed the highest levels of neutral detergent soluble protein and the lowest levels of acid detergent soluble protein. Moreover, steam flaking and roasting decreased and increased the amount of acid detergent insoluble protein, respectively. When using dry heat (microwave and roasting), the acid detergent soluble and insoluble protein fractions were increased. As a result of this experiment, the nitrogen fractions were altered using heat processing. Hence, protein fermented feed and ruminal fermentation conditions can be expressed using these results. KW - Vicia ervilia KW - steam flaking KW - microwave KW - roasting Y1 - U6 - http://dx.doi.org/10.3390/fermentation9050419 VL - 9 IS - 5 ER - TY - JOUR A1 - Ahmadzadeh, Leila A1 - Hosseinkhani, Ali A1 - Palangi, Valiollah A1 - Lackner, Maximilian T1 - Supplementary Feed Additives Can Improve Lamb Performance in Terms of Birth Weight, Body Size, and Survival Rate JF - Animals KW - feed restriction KW - monensin sodium KW - offspring performance Y1 - U6 - http://dx.doi.org/10.3390/ani13060993 IS - 13 / 6 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Mohamed A1 - Olaverri-Monreal, Cristina T1 - Classification of Streetsigns Using Gaussian Process Latent Variable Models T2 - 2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria KW - Streetsigns KW - Gaussian KW - Vehicles Y1 - 2020 ER - TY - JOUR A1 - Sattinger, Vinzenz A1 - Papa, Maximilian A1 - Stuja, Kemajl A1 - Kubinger, Wilfried T1 - Methodik zur Entwicklung sicherer kollaborativer Produktionssysteme im Rahmen von Industrie 4.0 JF - e & i Elektrotechnik und Informationstechnik KW - Robotics KW - Industry 4.0 Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Bululukova, Darya A1 - Wahl, Harald T1 - Integrative Secondary Education Programmes and Research in Smart Cities Context T2 - Proceedings of the REAL CORP 2016 KW - Smart City KW - Education Y1 - 2018 ER - TY - JOUR A1 - Muehleisen, Wolfgang A1 - Eder, Gabriele C. A1 - Voronko, Yuliya A1 - Spielberger, Markus A1 - Sonnleitner, Horst A1 - Knöbl, Karl A1 - Ebner, Rita A1 - Ujvari, Gusztáv A1 - Hirschl, Christina T1 - Outdoor detection and visualization of hailstorm damages of photovoltaic plants JF - Renewable Energy KW - Photovoltaics KW - Damage Detection KW - Hailstorms Y1 - 2018 IS - 118 SP - 138 EP - 145 ER - TY - CHAP A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Radinger, Thomas A1 - Stuja, Kemajl T1 - Development of a safety industry 4.0 production environment T2 - 28th DAAAM International Symposium on Intelligent Manufacturing and Automation KW - Saftey KW - Robotics Y1 - 2020 ER - TY - BOOK A1 - Lackner, Maximilian A1 - Chen, Wei-Ying, A1 - Suzuki, Toshio T1 - Handbook of Climate Change Mitigation and Adaptation KW - Climate Change Y1 - 2018 ER - TY - CHAP A1 - Angel, Nikolaus A1 - Orsolits, Horst A1 - Garcia, Jose T1 - Developing an AR Based Tool for Teaching Motion Analysis on Assembly Tasks T2 - 2022 8th International Conference of the Immersive Learning Research Network (iLRN), 2022 N2 - Engineering education courses look into processes, equipment and people in order to prepare students to tackle problems in their careers. In manufacturing industry, it is important to use virtual manufacturing tools to analyse processes. This includes both equipment and people. Assembly operations can involve human operators. Modular arrangements of predetermined time standards MODAPTS is a predetermined motion time system method used to analyse assembly processes. Augmented reality (AR) is increasingly being used for industrial processes as well as in education. AR application have been used for maintenance training as a useful way to overly digital instructions to a trainee whilst being able to look at a real object. This is potential beneficial for education. This paper presents the evaluation of a prototype to test a predetermined time standards model using an AR application. An evaluation was carried out comparing AR-based instructions in tablet and PC monitor and paper-written instructions. The results of evaluating the prototype encourage their use as an educational tool in engineering courses. KW - Augmented Reality KW - Education Technology KW - Virtual Engineering KW - Assembly Assistance Y1 - SN - 978-1-7348-9952-8 U6 - http://dx.doi.org/10.23919/iLRN55037.2022.9815914 ER -