TY - JOUR A1 - Engelhardt-Nowitzki, Corinna A1 - Aburaia, Mohamed A1 - Otrebski, Richard A1 - Rauer, Johannes A1 - Orsolits, Horst T1 - Research-based teaching in Digital Manufacturing and Robotics – the Digital Factory at the UAS Technikum Wien as a Case Example JF - Procedia Manuf KW - Teaching KW - Manufacturing KW - Digital Factory KW - Robotic Y1 - 2020 ER - TY - JOUR A1 - Aburaia, Mohamed A1 - Lackner, Maximilian A1 - Bucher, Michael A1 - Gonzalez-Gutierrez, Joamin A1 - Zhang, Haiguang A1 - Lammer, Herfried T1 - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament JF - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament,” vol. 4, no. 1, p. 12, 2020 KW - Production KW - Fiber KW - FFF KW - Filament Y1 - 2020 ER - TY - CHAP A1 - Werner, Jan A1 - Aburaia, Mohamed A1 - Raschendorfera, A A1 - Lackner, Maximilian T1 - MeshSlicer: A 3D-Printing software for printing 3D-models with a 6-axis industrial robot T2 - 14th CIRP, Gulf of Naples, Italy, 2020 KW - 3D KW - robot KW - Printing Y1 - 2020 ER - TY - CHAP A1 - Rauer, Johannes A1 - Aburaia, Mohamed A1 - Wöber, Wilfried T1 - Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Grasping T2 - Austrian Robotics Workshop 2020 KW - Semi-Automatic KW - Neural Network KW - Robotic KW - Grasping KW - 6D Y1 - 2020 ER - TY - CHAP A1 - Aburaia, Mohamed A1 - Lackner, Maximilian T1 - Parameter Optimization for the 3D Print of Thermo-plastic Pellets with an Industrial Robot T2 - International Symposium for Production Research 2020, Turkey KW - 3D KW - Optimization KW - Print KW - Industrial KW - Robot Y1 - 2020 ER - TY - CHAP A1 - Kainrath, Martin A1 - Aburaia, Mohamed A1 - Lackner, Maximilian T1 - Accuracy Improvement and Process Flow Adaption for Robot Machining T2 - International Symposium for Production Research 2020, Turkey KW - Robot KW - Machining KW - Improvement Y1 - 2020 ER - TY - CHAP A1 - Kefer, Martin A1 - Wöber, Wilfried A1 - Szuegyi, Daniel A1 - Kubinger, Wilfried T1 - A Novel and Automated Circle Pattern Recognition Technique for Infra-Red Stero Camera Calibration T2 - Proceedings of the 10th IASTED International Conference on Signal Processing, Pattern Recognition and Applications KW - Pattern Recognition KW - Infra-Red Camera Y1 - 2019 SP - 404 EP - 410 ER - TY - RPRT A1 - Zelger, Thomas A1 - Fechner, Hubert A1 - Setznagel, R. A1 - Tabakovic, Momir T1 - THEBAVOL: Anwendungen und Grenzen der THErmischen BAuteilaktivierung im großVOLumigen Geschoßbau KW - Building Parts Y1 - ER - TY - CHAP A1 - Kriegler, Andreas A1 - Wöber, Wilfried T1 - Vision-based Docking of a Mobile Robot T2 - Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020 KW - Automation KW - Robotics Y1 - SP - 6 EP - 12 ER - TY - CHAP A1 - Orsolits, Horst T1 - Virtual Engineering Applied in a Digital Learning Factory T2 - Perspectives in Industry Digitalization and Advanced Manufacturing in the Black Sea Region KW - Virtual Engineering Y1 - 2021 ER - TY - GEN A1 - Lackner, Maximilian T1 - Cyanobacteria as model organism for PHB production KW - Bacteria KW - PHB Y1 - 2018 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Supper, Georg A1 - Aschauer, Christian A1 - Gronauer, Andreas A1 - Tomic, Dana Kathrin A1 - Hörmann, Sandra T1 - Entwicklung eines auf semantischer Technologie basierenden Analysesystems zur Überwachung der Wasserversorgung von landwirtschaftlichen Nutzflächen T2 - Referate der 35. GIL-Jahrestagung in Geisenheim - Komplexität versus Bedienbarkeit/Mensch-Maschine-Schnittstellen N2 - Eine ressourcenschonende Bewässerung von Nutzpflanzen wird durch den Klimawandel in den nächsten Jahren immer größere Bedeutung gewinnen. Eine Möglichkeit, das für Pflanzen zur Verfügung stehende Wasserpotential beurteilen zu können, ist die Nutzung von klimatischen Faktoren und Computermodellen. In diesem Beitrag wird die Entwicklung eines auf dem Forschungsprojekt agriOpenLink basierten Softwaresystems zur Abschätzung der Evapotranspiration auf einer landwirtschaftlichen Nutzfläche beschrieben. Der Fokus dieses Berichts liegt auf dem Softwareframework, welches auf semantischer Technologie basiert und formalisiertes landwirtschaftliches Wissen sowie Computermodelle zur Abschätzung der Evapotranspiration beinhaltet. Es werden erste experimentelle Ergebnisse diskutiert und die semantische Technologie bezüglich praktischer Nutzung evaluiert. KW - Semantic Modelling Y1 - 2019 ER - TY - GEN A1 - Tabakovic, Momir A1 - Schneider, Simon A1 - Laurent, Pierre A1 - Zelger, Thomas A1 - Kerschbaum, Elisabeth A1 - Figl, Hildegund T1 - Korneuburgs way2smart - mobility concept, energy platform and social interaction KW - Energy Market KW - Energy Consumption KW - Household Y1 - 2018 ER - TY - CHAP A1 - Lackner, Maximilian T1 - Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production T2 - Webinar on Biopolymers & Bioplastics, Meetings International, KW - Process Engineering KW - PHB Y1 - 2020 ER - TY - JOUR A1 - Lackner, Maximilian T1 - Industrial Engineering Management – THE key skill for the Digital Age JF - The International Journal of Engineering and Science (THE IJES) KW - Management KW - Industrial Engineering Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Fechner, Hubert A1 - van Sark, Wilfried A1 - Louwen, Atse A1 - Weiss, Ingrid A1 - Arancón, Sofia A1 - Geourghiou, George A1 - Makrides, George A1 - Hadjipanayi, Maria A1 - Loucaidou, Eliza A1 - Ioannidou, Monica T1 - Development of BIPV courseware for students and professionals T2 - Proceedings of the 34th European Photovoltaic Solar Energy Conference (EU PVSEC 2017) KW - Education KW - Photovoltaics Y1 - 2018 SP - 2895 EP - 2899 ER - TY - GEN A1 - Tabakovic, Momir A1 - Fechner, Hubert A1 - van Sark, Wilfried A1 - Louwen, Atse A1 - Weiss, Ingrid A1 - Arancón, Sofia A1 - Geourghiou, George A1 - Makrides, George A1 - Hadjipanayi, Maria A1 - Loucaidou, Eliza A1 - Ioannidou, Monica T1 - Development of BIPV courseware for students and professionals KW - Education KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Schneider, Simon A1 - Tabakovic, Momir T1 - Aktueller Stand und Zukunft von stadteigenen Gebäuden einer Kleinstadt mit energieautonomen Leitbild: Verbrauch, Berechnung und Potential im Rahmen von Smart City Demo Way2Smart KW - Smart City Y1 - ER - TY - GEN A1 - Dannereder, Florian A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Pachschwöll, Paul Herwig A1 - Aburaia, Mohamed A1 - Shooman, Diane T1 - Development of a 3D-Printed Bionic Hand with Muscle- and Force Control KW - Robotics Y1 - ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Ali A1 - Aburaia, Mohamed A1 - Kubinger, Wilfried A1 - Otrebski, Richard A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich T1 - Digital Manufacturing & Robotics im Department Industrial Engineering T2 - KONFERENZ DER MECHATRONIK PLATTFORM: Autonome mechatronische Systeme KW - Digital Manufacturing KW - Robotics KW - Industrial Engineering Y1 - ER - TY - GEN A1 - Tabakovic, Momir T1 - Status and outlook for building integrated photovoltaics(BIPV) in relation to educational needs in the BIPV sector KW - Photovoltaics Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Integrative Secondary Education Programmes and Research in Smart Cities Context KW - Smart City Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Welche Speicher und Netze braucht die Energiewende? KW - Energy Storage KW - Energy Network Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - EU-ASCIN - Projektpräsentation KW - Smart City Y1 - ER - TY - GEN A1 - Tabakovic, Momir T1 - EU-ASCIN - Projektpräsentation KW - Smart City Y1 - ER - TY - RPRT A1 - van Sark, Wilfried A1 - Louwen, Atse A1 - Geourghiou, George A1 - Makrides, George A1 - Loucaidou, Eliza A1 - Ioannidou, Monica A1 - Fechner, Hubert A1 - Tabakovic, Momir A1 - Weiss, Ingrid A1 - Arancón, Sofia T1 - Review of the BIPV market and education needs in the field - Framework and Requirements' Analysis KW - Photovoltaics KW - Energy Market KW - Education Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Smart Cities Education as Mobility, Energy & ICT Hub KW - Smart City KW - Mobility Y1 - 2018 ER - TY - GEN A1 - Tabakovic, Momir T1 - Smart Grids at the University AS Technikum Vienna KW - Smart Grids Y1 - 2018 ER - TY - JOUR A1 - Markl, Erich A1 - Grünbichler, Hannes A1 - Lackner, Maximilian T1 - Cyanobacteria for PHB Bioplastics Production: A Review JF - IntechOpen N2 - Cyanobacteria, or blue-green algae, can be used as host to produce polyhydroxyalkanoates (PHA), which are promising bioplastic raw materials. The most important material thereof is polyhydroxybutyrate (PHB), which can replace the commodity polymer polypropylene (PP) in many applications, yielding a bio-based, biodegradable alternative solution. The advantage from using cyanobacteria to make PHB over the standard fermentation processes, with sugar or other organic (waste) materials as feedstock, is that the sustainability is better (compare first-generation biofuels with the feed vs. fuel debate), with CO2 being the only carbon source and sunlight being the sole energy source. In this review article, the state of the art of cyanobacterial PHB production and its outlook is discussed. Thirty-seven percent of dry cell weight of PHB could be obtained in 2018, which is getting close to up to 78% of PHB dry cell weight in heterotrophic microorganisms in fermentation reactors. A good potential for cyanobacterial PHB is seen throughout the literature. KW - Bio-based Plastics KW - PHB Y1 - ER - TY - JOUR A1 - Knapp, Alexander A1 - Lackner, Maximilian A1 - Markl, Erich T1 - Abrasive pads for sustainable and cost-effective industrial and institutional floor cleaning JF - International Journal of Advance Engineering and Research Development N2 - Industrial and institutional floor cleaning today relies on mechanical action combined with chemicals, which is costly and a burden to the environment. There are floor cleaning pads on the market which claim increased service time due to diamond particles contained in the nonwoven materials. In this study, it was investigated whether cleaning results can also be obtained with hard-particle-coated pads using only water. SiC, diamond and Al 2 O 3 were used with particle sizes between 5 and 125 µm. 5 g/m² of hard particles were applied to the pads in epoxy resin. Weight loss from abrasive cleaning in 500 cycles and gloss increase were measured. Diamond and silicon carbide particles were found to work with pure water, without the need for chemical cleaning agents. KW - Floor cleaning KW - Mechanical Action KW - Chemicals Y1 - 2018 SN - 2348-4470 SP - 84 EP - 86 ER - TY - GEN A1 - Kamravamanesh, Donya A1 - Pflügl, Stefan A1 - Lackner, Maximilian A1 - Herwig, Christoph T1 - Bioprocess Development for Sustainable poly-β-hydroxybutyrate Production KW - Bioplastics KW - PHB KW - Cyanobacteria Y1 - ER - TY - JOUR A1 - Markl, Erich A1 - Grünbichler, Hannes A1 - Lackner, Maximilian T1 - PHB - Bio Based and Biodegradable Replacement for PP: A Review JF - Novel Techniques in Nutrition and Food Science KW - Bio Degradable KW - PHB KW - Bio-based Plastics Y1 - VL - 2 IS - 2 ER - TY - BOOK A1 - de Vries, Sytse A1 - Markl, Erich A1 - Lackner, Maximilian T1 - Energy efficiency management in the shipping industry KW - Transportation KW - Energy efficiency Y1 - SN - 978 3 659 71981 3 PB - Lambert Academic Publishing ER - TY - CHAP A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Bermejo Moratinos, Raúl A1 - Supancic, Peter A1 - Danzer, Robert T1 - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios T2 - th International Conference on Smart Materials and Structures KW - Robotics Y1 - 2019 PB - Material Sci Eng 2018 (7) ER - TY - GEN A1 - Grünbichler, Hannes A1 - Engelhardt-Nowitzki, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Kreith, Josef A1 - Bermejo Moratinos, Raúl A1 - Supancic, Peter A1 - Danzer, Robert T1 - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios KW - Robotics Y1 - 2018 ER - TY - CHAP A1 - Lackner, Maximilian A1 - Zangl, Sabine A1 - Lembacher, Harald A1 - Rüttinger, Norbert A1 - Fochler, Claus T1 - Non-wovens and recycling – An overview, International Conference on Recycling and Waste Water Management T2 - International Conference on Recycling and Waste Water Management KW - Environment KW - Sustainability KW - Recycling Y1 - 2020 ER - TY - JOUR A1 - Schneider, Simon A1 - Bartlmä, Nadja A1 - Leibold, Jens A1 - Schöffmann, Petra A1 - Tabakovic, Momir A1 - Zelger, Thomas T1 - New assessment method for buildings and districts towards “Net Zero Energy Buildings" compatible with the energy scenario 2050 JF - Corp KW - Energy Technologies KW - Building Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Schneider, Simon A1 - Leibold, Jens A1 - Zelger, Thomas A1 - Bartlmä, Nadja A1 - Holzer, Peter A1 - Schöffmann, Petra T1 - Way to positive energy districts in Vienna T2 - Mission Innovation Austria KW - Energy Technologies KW - Vienna Y1 - ER - TY - CHAP A1 - Tabakovic, Momir T1 - Development and Implementation of BIPV Courseware for Higher Education and Professionals T2 - Smart Education and e-Learning KW - Education KW - E-Learning Y1 - PB - Springer ER - TY - CHAP A1 - Rauh, Sebastian A1 - Orsolits, Horst T1 - Perspectives on Virtual Reality in Higher Education for Robotics and Related Engineering Disciplines T2 - Robotics in Education (International Conference on Robotics in Education) N2 - Industrial engineering education has a strong focus on and affinity towards technology. While Virtual Reality hardware and applications advance and learning behaviour changes, it is particularly interesting to determine the possible use of Virtual Reality for teaching engineering subjects, for example fundamentals of robotics. This paper presents a study which examines the possible use of Virtual Reality learning environments at higher learning institutions. The study shows perspectives of students and lecturers and identifies opportunities and challenges for the use of Virtual Reality in industrial engineering education. The results of the indicated study show that the participants have a positive attitude towards Virtual Reality and strong motivation for in class use. The study results also suggest, that Virtual Reality content creation should be included in engineering curricula. KW - Virtual reality KW - Industrial engineering education KW - User study KW - The state of virtual reality Y1 - SN - 978-3-031-12848-6 SP - 39 EP - 51 PB - Springer ER - TY - GEN A1 - Tabakovic, Momir T1 - Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves KW - Generator KW - Energy Conversion KW - Waste Heat Y1 - ER - TY - BOOK A1 - Tabakovic, Momir T1 - Analyze and optimize the prototype of a thermoelectric generator: as an electrical renewable power source for biomass stoves KW - Biomass KW - Thermoelectrics Y1 - 2019 PB - AV Akademikerverlag ER - TY - GEN A1 - Markl, Erich A1 - Orsolits, Horst A1 - Stojicic, Dario T1 - Virtuelle Technologien in der Robotik KW - Robotics Y1 - ER - TY - GEN A1 - Tabakovic, Momir T1 - Way2Smart Korneuburg: Smart Cities Projekt KW - Smart City KW - Energy Consumption KW - Energy Storage Y1 - 2018 ER - TY - THES A1 - Tabakovic, Momir T1 - Direct conversion of waste heat into electric energy by thermoelectric generators N2 - The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber. KW - Energy Technologies KW - Renewable Energy Y1 - ER - TY - GEN A1 - Lackner, Maximilian A1 - Kamravamanesh, Donya A1 - Markl, Erich A1 - Engelhardt-Nowitzki, Corinna A1 - Herwig, Christoph T1 - Optimization of process parameters to enhance Polyhydroxyalkanoate accumulation in a unicellular cyanobacterium using multivariate experimental design approach KW - Bacteria Y1 - 2018 ER - TY - GEN A1 - Orsolits, Horst A1 - Gallasch, Andreas T1 - Make a 25 Year old Claw Crane Digital with Thingworx KW - Crane Y1 - ER - TY - GEN A1 - Orsolits, Horst T1 - Using AR to Build a Digital Twin Robotics Laboratory KW - Augmented Reality KW - Digital Twin Y1 - ER - TY - CHAP A1 - Chirita, Cristian A1 - Tabakovic, Momir T1 - Optimization of a simulation for thermoelectric generators and their application in water boiler systems with combustion chamber T2 - X International Conference Industrial Engineering and Environmental Protection KW - Generators KW - Renewable Energy Y1 - SP - 143 EP - 151 ER - TY - GEN A1 - Kamravamanesh, Donya A1 - Pflügl, Stefan A1 - Lackner, Maximilian A1 - Herwig, Christoph T1 - Photosynthetic poly-β-hydroxybutyrate accumulation in unicellular cyanobacterium Synechocystis sp. PCC 6714 KW - Bacteria Y1 - 2018 ER -