TY  - GEN
A1  - Kamravamanesh, Donya
A1  - Pflügl, Stefan
A1  - Lackner, Maximilian
A1  - Herwig, Christoph
T1  - Bioprocess Development for Sustainable poly-β-hydroxybutyrate Production
KW  - Bioplastics
KW  - PHB
KW  - Cyanobacteria
Y1  - 
ER  - 
TY  - JOUR
A1  - Markl, Erich
A1  - Grünbichler, Hannes
A1  - Lackner, Maximilian
T1  - PHB - Bio Based and Biodegradable Replacement for PP: A Review
JF  - Novel Techniques in Nutrition and Food Science
KW  - Bio Degradable
KW  - PHB
KW  - Bio-based Plastics
Y1  - 
VL  - 2
IS  - 2
ER  - 
TY  - BOOK
A1  - de Vries, Sytse
A1  - Markl, Erich
A1  - Lackner, Maximilian
T1  - Energy efficiency management in the shipping industry
KW  - Transportation
KW  - Energy efficiency
Y1  - 
SN  - 978 3 659 71981 3
PB  - Lambert Academic Publishing
ER  - 
TY  - CHAP
A1  - Grünbichler, Hannes
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Lackner, Maximilian
A1  - Kreith, Josef
A1  - Bermejo Moratinos, Raúl
A1  - Supancic, Peter
A1  - Danzer, Robert
T1  - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios
T2  - th International Conference on Smart Materials and Structures
KW  - Robotics
Y1  - 2019
PB  - Material Sci Eng 2018 (7)
ER  - 
TY  - GEN
A1  - Grünbichler, Hannes
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Lackner, Maximilian
A1  - Kreith, Josef
A1  - Bermejo Moratinos, Raúl
A1  - Supancic, Peter
A1  - Danzer, Robert
T1  - Adaptation of a universal testing machine to characterise the material response of multi-layered piezoelectric actuators under fully coupled loading scenarios
KW  - Robotics
Y1  - 2018
ER  - 
TY  - GEN
A1  - Tabakovic, Momir
T1  - Analysis of Half-Heusler and Bi2Te3 thermoelectric generator for direct conversion of waste heat recovery from a solid-fueled stoves
KW  - Generator
KW  - Energy Conversion
KW  - Waste Heat
Y1  - 
ER  - 
TY  - GEN
A1  - Tabakovic, Momir
T1  - Way2Smart Korneuburg: Smart Cities Projekt
KW  - Smart City
KW  - Energy Consumption
KW  - Energy Storage
Y1  - 2018
ER  - 
TY  - THES
A1  - Tabakovic, Momir
T1  - Direct conversion of waste heat into electric energy by thermoelectric generators
N2  - The energy crisis and environment deterioration are two major problems for the 21st century. Waste heat recovery offers many opportunities to make a global contribution to this challenge. Key concepts such as waste heat recovery are the basic ideas in thermoelectricity. A part of waste heat is produced by solid-fuel stoves. Nevertheless, the quantity of high-performance solid-fuel stoves is increasing very quickly for economic and environmental reasons. These sophisticated stoves need electricity for the pump for water circulation and the control system. Thermoelectric generators (TEG) could help with this issue. This work aims to present an experimental validation of integrating a thermoelectric generator into a solid-fuel stove. An economic comparison between the most common Bismuth Telluride (Bi2Te3) module and the newly developed half-Heusler modules is complete. An experimental set-up was built to optimize the common (Bi2Te3) modules and test the newly developed half-Heusler modules from an entire system point of view. An assessment of thermoelectric technology potential, module prices, further material developments and applications is completed. Based on the literature research and a Computational Fluid Dynamics (CFD) simulation software the first prototype was built. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, and thermoelectric modules. The number and the place of these modules are changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the module. Different operating points of hot inlet gas airflow were tested for the Bismuth Telluride and half-Heusler modules. The Bismuth Telluride module was tested under real-life conditions using the exhaust of the solid-fuel stoves without influencing the combustion chamber.
KW  - Energy Technologies
KW  - Renewable Energy
Y1  - 
ER  - 
TY  - CHAP
A1  - Wöber, Wilfried
A1  - Novotny, Georg
A1  - Aburaia, Mohamed
A1  - Otrebski, Richard
A1  - Kubinger, Wilfried
T1  - Estimating a Sparse Representation of Gaussian Processes Using Global Optimization and the Bayesian Information Criterion
T2  - Austrian Robotics Workshop 2018
KW  - Mobile Robotics
KW  - Localizations
KW  - Gaussian process
KW  - Robotics
Y1  - 
ER  - 
TY  - CHAP
A1  - Dannereder, Florian
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Lackner, Maximilian
A1  - Kreith, Josef
A1  - Pachschwöll, Paul Herwig
A1  - Aburaia, Mohamed
A1  - Shooman, Diane
T1  - Development of a 3D-Printed Bionic Hand with Muscle- and Force Control
T2  - Proceedings of the Austrian Robotics Workshop 2018
KW  - Robotics
Y1  - 
ER  - 
TY  - CHAP
A1  - Wöber, Wilfried
A1  - Aburaia, Ali
A1  - Aburaia, Mohamed
A1  - Kubinger, Wilfried
A1  - Otrebski, Richard
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
T1  - Digital Manufacturing & Robotics im Department Industrial Engineering
T2  - Konferenz der Mechatronik Plattform Autonome mechatronische Systeme
N2  - Digitalisierung und Automatisierung in produzierender Industrie sind Schlagwörter heutiger Forschungsbarbeiten am Department Industrial Engineering der Fachhochschule Technikum Wien. Künstliche Intelligenz, vernetzte Sensorsysteme oder übergreifende Prozessplanung ermöglichen Optimierung hinsichtlich Produktionszeit oder Fertigung von individualisierten Produkten, was zur Losgröße 1 führt. In diesem Dokument werden Forschungstätigkeiten des Departments Industrial Engineering im Kontext Vernetzung, Servicerobotik sowie Industrierobotik zusammengefasst.
KW  - Industrial Engineering
KW  - Digital Manufacturing
KW  - Networking
KW  - Robotics
Y1  - 2018
SP  - 20
EP  - 21
ER  - 
TY  - GEN
A1  - Wöber, Wilfried
A1  - Aburaia, Ali
A1  - Kubinger, Wilfried
A1  - Otrebski, Richard
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Aburaia, Mohamed
T1  - Digital Manufacturing & Robotics im Department Industrial Engineering
KW  - Industrial Engineering
KW  - Digital Manufacturing
KW  - Networking
KW  - Robotics
Y1  - 
ER  - 
TY  - CHAP
A1  - Aburaia, Mohamed
A1  - Lackner, Maximilian
A1  - Grünbichler, Hannes
A1  - Engelhardt-Nowitzki, Corinna
A1  - Markl, Erich
A1  - Lammer, H.
A1  - Zhang, Haiguang
A1  - Wang, J.
A1  - Sapotka, J.
A1  - Janics, T.
A1  - Hailberger, M.
T1  - Freeform-FDM process development using natural fibre reinforced biopolymers
T2  - 2nd International Conference on 3D Prinitng Technology and Innovation March 19-20, 2018 London, UK
KW  - Freeform Printing
KW  - Additive Manufacturing
Y1  - 
ER  - 
TY  - CHAP
A1  - Dannereder, Florian
A1  - Pachschwöll, Paul
A1  - Aburaia, Mohamed
A1  - Markl, Erich
A1  - Lackner, Maximilian
A1  - Engelhardt-Nowitzki, Corinna
A1  - Shooman, Diane
T1  - Development of a 3D-printed Bionic Hand with Muscle- and Force Control
T2  - Austrian Robotics Workshop 2018
KW  - Robotics
KW  - Prosthetics
KW  - 3D-Printing
Y1  - 
ER  - 
TY  - CHAP
A1  - Schneider, Simon
A1  - Zelger, Thomas
A1  - Tabakovic, Momir
T1  - Combining bottom-up and top-down approaches to converge heterogeneous building data into a homogenous, interactive and expandable energy autonomy platform
T2  - BauZ! 2018 In Betrieb gesetzt! - Wiener Kongress für zukunftsfähiges Bauen
KW  - Energy Autonomy
Y1  - 
ER  - 
TY  - CHAP
A1  - Tabakovic, Momir
A1  - van Sark, Wilfried
A1  - Louwen, Atse
A1  - Weiss, Ingrid
A1  - Arancon, Sofia
A1  - Makrides, George
A1  - Hadjipanayi, Maria
A1  - Loucaidou, Eliza
T1  - Development of BIPV courseware for students and professionals
T2  - Proceeding: Austrian PV Conference
KW  - Course Material
KW  - Photovoltaics
Y1  - 
ER  - 
TY  - CHAP
A1  - Tabakovic, Momir
T1  - Direct conversation of waste heat from solid-fuel stove into electric energy using a high temperature thermoelectric generator compared to Bi2Te3 thermoelectric generator
T2  - Proceeding: ISEC 2018
KW  - Energy Conversion
KW  - Electricity
KW  - Waste Heat
Y1  - 
ER  - 
TY  - RPRT
A1  - Tabakovic, Momir
A1  - Fechner, Hubert
A1  - Leonhartsberger, Kurt
T1  - National Survey Report of PV Power Applications in Austria 2017
T2  - IEA- International Energy Agency
KW  - Photovoltaics
KW  - Survey Report
Y1  - 
ER  - 
TY  - GEN
A1  - Illich, Peter
A1  - Eder, Gabriele C.
A1  - Berger, Karl A.
A1  - Ujvári, Gusztáv
A1  - Peharz, Gerhard
A1  - Rechberger, P.
A1  - Aichinger, Martin
A1  - Moor, D.
T1  - Ringversuch von baugleichen Glas-Glas-BIPV-Elementen unter verschiedenen Klimabedingungen – ein Beitrag Österreichs zu IEA PVPS Task 15: „Beschleunigung der Marktdurchdringung von BIPV“
KW  - Photovoltaics
KW  - Renewable Energy
Y1  - 
ER  - 
TY  - RPRT
A1  - Biermayr, Peter
A1  - Dißauer, Christa
A1  - Eberl, Manuela
A1  - Enigl, Monika
A1  - Fechner, Hubert
A1  - Fischer, L.
A1  - Leonhartsberger, Kurt
A1  - Maringer, F.
A1  - Moidl, S.
A1  - Schmidl, C.
A1  - Strasser, C.
A1  - Weiss, W.
A1  - Wonisch, P.
A1  - Wopienka, E.
T1  - Innovative Energietechnologien in Österreich - Marktentwicklung 2018
T2  - BMVIT Schriftenreihe 04/2018
KW  - Energy Technology
KW  - Economy
KW  - Market
Y1  - 
ER  - 
TY  - CHAP
A1  - Illich, Peter
A1  - Eder, Gabriele C.
A1  - Berger, Karl A.
A1  - Ujvári, Gusztáv
A1  - Rechberger, P.
A1  - Moor, D.
A1  - Aichinger, Martin
T1  - Comparative Performance Measurements of Identical BIPV-Elements in Different Climatic Environments - A Round Robin Action within the IEA PVPS Task 15 Collaboration
T2  - 35th European Photovoltaic Solar Energy Conference and Exhibition
KW  - Photovoltaics
KW  - Solar Power
Y1  - 
SN  - 3-936338-50-7
ER  -