TY  - CHAP
A1  - Salzbrunn, Benedikt
A1  - Kipke, Christine
A1  - Busch, Marc
A1  - Schiava, Marco della
T1  - rapid UX-score: Modulare und Adaptive Messung von User Experience
T2  - Mensch und Computer 2020
KW  - UX Messung
KW  - Modulare UX Messung
KW  - Adaptive UX Messung
KW  - Rasch-Modell
Y1  - 2020
SP  - 6
EP  - 9
CY  - Magdeburg
ER  - 
TY  - JOUR
A1  - Huber, Albert
T1  - Junction Conditions and local Spacetimes in General Relativity
JF  - The European Physical Journal C
N2  - In the present work, a theoretical framework focussing on local geometric deformations is introduced in order to cope with the problem of how to join spacetimes with different geometries and physical properties. This framework is used to show that two Lorentzian manifolds can be matched by considering local deformations of the associated spacetime metrics. Based on the fact that metrics can be suitably matched in this way, it is shown that the underlying geometric approach allows the characterization of local spacetimes in general relativity. Furthermore, it is shown that said approach not only extends the conventional thin shell formalism, but also allows the treatment of geometric problems that cannot be treated with standard gluing techniques.
KW  - Relativity
Y1  - 
ER  - 
TY  - JOUR
A1  - Schätti, Jonas
A1  - Köhler, Valentin
A1  - Mayor, Marcel
A1  - Fein, Yaakov
A1  - Geyer, Philipp
A1  - Mairhofer, Lukas
A1  - Gerlich, Stefan
A1  - Arndt, Markus
T1  - Matter-wave interference and deflection of tripeptides decorated with fluorinated alkyl chains
JF  - Journal of Mass Spectrometry
KW  - interference
KW  - quantum
KW  - meteorology
Y1  - 
IS  - Vol 55, issue 6
ER  - 
TY  - JOUR
A1  - Fein, Yaakov
A1  - Shayeghi, Armin
A1  - Mairhofer, Lukas
A1  - Kialka, Filip
A1  - Rieser, Philipp
A1  - Geyer, Philipp
A1  - Gerlich, Stefan
A1  - Arndt, Markus
T1  - Quantum-Assisted Measurement of Atomic Diamagnetism
JF  - Physical Review
KW  - diamagnetism
KW  - quantum
KW  - meteorology
Y1  - 
IS  - Volume 10, Issue 1
ER  - 
TY  - JOUR
A1  - Hoffman, Michael E.
A1  - Kuba, Markus
A1  - Levy, Moti
A1  - Louchard, Guy
T1  - An Asymptotic Series for an Integral
JF  - Ramanujan Journal
KW  - asymtotic
KW  - integral
Y1  - 2020
ER  - 
TY  - JOUR
A1  - Hoffmann, Michael E.
A1  - Kuba, Markus
A1  - Levy, Moti
A1  - Louchard, Guy
T1  - An Asymptotic Series for an Integral
JF  - Ramanujan Journal
KW  - Asymptotic
KW  - Integral
Y1  - 
ER  - 
TY  - JOUR
A1  - Otrebski, Richard
A1  - Rauer, Johannes
A1  - Engelhardt-Nowitzki, Corinna
A1  - Kryvinska, Natalia
A1  - Aburaia, Mohamed
A1  - Pospisil, Dominik
T1  - Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling
JF  - International Journal of Ubiquitous Systems and Pervasive Networks (JUSPN)
KW  - Communication Modeling
KW  - Data Modeling
KW  - Digital Manufacturing
Y1  - 2020
IS  - Volume 12, Issue 2
ER  - 
TY  - JOUR
A1  - Hu, Qingxi
A1  - Feng, Di
A1  - Zhang, Haiguang
A1  - Yao, Yuan
A1  - Aburaia, Mohamed
A1  - Lammer, Herfried
T1  - Oriented to Multi-Branched Structure Unsupported 3D Printing Method Research
JF  - Materials, vol. 13, no. 9, p. 2023, Apr. 2020
KW  - Structure
KW  - 3D
KW  - Printing
Y1  - 2020
ER  - 
TY  - JOUR
A1  - Engelhardt-Nowitzki, Corinna
A1  - Aburaia, Mohamed
A1  - Rauer, Johannes
T1  - Research-based teaching in digital manufacturing and robotics - the Digital Factory at the UAS Technikum Wien as an exemplary case
JF  - CLF2020 TU Graz
KW  - Digital Manufacturing
KW  - Robotics
Y1  - 2020
ER  - 
TY  - JOUR
A1  - Mandl, Thomas
A1  - Östlin, Christofer
A1  - Dawod, Ibrahim E.
A1  - Brodmerkel, Maxim N.
A1  - Marklund, Erik G.
A1  - Martin, Andrew V.
A1  - Timneanu, Nicusor
A1  - Caleman, Carl
T1  - Structural Heterogeneity in Single Particle Imaging Using X-ray Lasers
JF  - The Journal of Physical Chemistry Letters
N2  - One of the challenges facing single particle imaging with ultrafast X-ray pulses is the structural heterogeneity of the sample to be imaged. For the method to succeed with weakly scattering samples, the diffracted images from a large number of individual proteins need to be averaged. The more the individual proteins differ in structure, the lower the achievable resolution in the final reconstructed image. We use molecular dynamics to simulate two globular proteins in vacuum, fully desolvated as well as with two different solvation layers, at various temperatures. We calculate the diffraction patterns based on the simulations and evaluate the noise in the averaged patterns arising from the structural differences and the surrounding water. Our simulations show that the presence of a minimal water coverage with an average 3 Å thickness will stabilize the protein, reducing the noise associated with structural heterogeneity, whereas additional water will generate more background noise.
KW  - Protein structure
KW  - Physical and chemical processes
KW  - Peptides and proteins
KW  - Physical and chemical properties
KW  - Layers
Y1  - 2020
VL  - 2020
IS  - Volume 11, Issue 15
SP  - 6077
EP  - 6083
ER  - 
TY  - JOUR
A1  - Mandl, Thomas
A1  - Sinelnikova, Anna
A1  - Östlin, Christofer
A1  - Grånäs, Oscar
A1  - Brodmerkel, Maxim N.
A1  - Markl, Erik G.
A1  - Caleman, Carl
T1  - Reproducibility in the unfolding process of protein induced by an external electric field
JF  - Chemical Science
N2  - The dynamics of proteins are crucial for their function. However, commonly used techniques for studying protein structures are limited in monitoring time-resolved dynamics at high resolution. Combining electric fields with existing techniques to study gas-phase proteins, such as single particle imaging using free-electron lasers and gas-phase small angle X-ray scattering, has the potential to open up a new era in time-resolved studies of gas-phase protein dynamics. Using molecular dynamics simulations, we identify well-defined unfolding pathways of a protein, induced by experimentally achievable external electric fields. Our simulations show that strong electric fields in conjunction with short-pulsed X-ray sources such as free-electron lasers can be a new path for imaging dynamics of gas-phase proteins at high spatial and temporal resolution.
KW  - Reproducibility protein
Y1  - 
ER  - 
TY  - CHAP
A1  - Pohn, Birgit
A1  - Kargl, Michaela
A1  - Reihs, Robert
A1  - Holzinger, Andreas
A1  - Zatloukal, Kurt
T1  - Towards a Deeper Understanding of How a Pathologist Makes a Diagnosis: Visualization of the Diagnostic Process in Histopathology
T2  - Sammelband: 2019 IEEE Symposium on Computers and Communications (ISCC)  Konferenztitel: 4th edition of the IEEE workshop on ICT Solutions for eHealth in conjunction with the 24th IEEE Symposium on Computers and Communications
KW  - microscopic pathology
KW  - diagnostic process
KW  - diagnostic path
KW  - diagnostic phases
KW  - visualization concept
Y1  - 2020
ER  - 
TY  - BOOK
A1  - Lehner, Martin
T1  - Viel Stoff – wenig Zeit
KW  - Vollständigkeitsfalle
KW  - Zeit
Y1  - 2020
PB  - Haupt
CY  - Bern, Stuttgart, Wien
ER  - 
TY  - BOOK
A1  - Lehner, Martin
T1  - Didaktische Reduktion
KW  - Didaktik
Y1  - 2020
PB  - Haupt
CY  - Bern, Stuttgart, Wien
ER  - 
TY  - JOUR
A1  - Salmen, Christine
T1  - With humility and courage: Educational scholarship as intellectual endeavor
JF  - International Journal for the Historiography of Education
KW  - Educational scholarship
Y1  - 
VL  - 10
IS  - 1
SP  - 97
EP  - 99
ER  - 
TY  - JOUR
A1  - Wala, Thomas
A1  - Felleitner-Goll, Katharina
T1  - Unternehmensleitbild
JF  - WISU
KW  - Unternehmen
Y1  - 2020
IS  - 7
SP  - 745 ff
ER  - 
TY  - BOOK
A1  - Lehner, Martin
T1  - Viel Stoff – wenig Zeit, Wege aus der Vollständigkeitsfalle
KW  - Zeit
Y1  - 2020
PB  - Haupt
CY  - Bern, Stuttgart, Wien
ER  - 
TY  - BOOK
A1  - Wala, Thomas
T1  - Innovations- und Technologiemanagement
KW  - Innovationsmanagement
Y1  - 2020
SN  - 9798681627715
PB  - Amazon
ER  - 
TY  - JOUR
A1  - Wala, Thomas
T1  - Die betriebswirtschaftliche Klausur: Innovationsmanagement
JF  - WISU
KW  - Innovationsmanagement
Y1  - 2020
IS  - 2
SP  - 195 ff
ER  - 
TY  - JOUR
A1  - Wala, Thomas
T1  - Die betriebswirtschaftliche Klausur: Controlling
JF  - WISU
KW  - Controlling
Y1  - 2020
IS  - 5
ER  - 
TY  - JOUR
A1  - Christine, Salmen
T1  - Do No Harm: A commentary on the outrage over a teacher evaluation app
JF  - Voices
KW  - evaluation app
Y1  - 
IS  - 274
SP  - 14
EP  - 16
ER  - 
TY  - CHAP
A1  - Steigl, D
A1  - Aburaia, Mohamed
A1  - Wöber, Wilfried
T1  - Autonomous Grasping of Known Objects Using Depth Data and the PCA
T2  - Austrian Robotics Workshop 2020
KW  - Robotic
KW  - Autonomous
KW  - Grasping
Y1  - 2020
ER  - 
TY  - JOUR
A1  - Markl, Erich
A1  - Lackner, Maximilian
T1  - Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review
JF  - Materials
N2  - In general, composite materials are difficult to recycle. Tires belong to this class of materials. On top, one of their main constitutents, vulcanized rubber, is as elastomer, which cannot be remolten and hence is particularly challenging to put to a new use. Today, the main end-of-life routes of tires and other rubber products are landfilling, incineration in e.g., cement plants, and grinding to a fine powder, generating huge quantities and indicating a lack of sustainable recycling of this valuable material. True feedstock recycling is not feasible for complex mixtures such as tires, but devulcanization can be done to reactivate the cross-linked polymer for material recycling in novel rubber products. Devulcanization, i.e., the breaking up of sulfur bonds by chemical, thermophysical, or biological means, is a promising route that has been investigated for more than 50 years. This review article presents an update on the state-of-the art in rubber devulcanization. The article addresses established devulcanization technologies and novel processes described in the scientific and patent literatures. On the one hand, tires have become high-tech products, where the simultaneous improvement of wet traction, rolling resistance, and abrasion resistance (the so-called “magic triangle”) is hard to achieve. On the other hand, recycling and sustainable end-of-life uses are becoming more and more important. It is expected that the public discussion of environmental impacts of thermoplastics will soon spill over to thermosets and elastomers. Therefore, the industry needs to develop and market solutions proactively. Every year, approximately 40 million tons of tires are discarded. Through the devulcanization of end-of-life tires (ELT), it is possible to produce new raw materials with good mechanical properties and a superior environmental footprint over virgin products. The devulcanization process has become an interesting technology that is able to support the circular economy concept.
KW  - rubber devulcanization
KW  - sustainability
KW  - recycling
Y1  - 
U6  - http://dx.doi.org/10.3390/ma13051246
VL  - 13
IS  - 5
ER  - 
TY  - JOUR
A1  - Wöber, Wilfried
A1  - Rauer, Johannes
A1  - Papa, Maximilian
A1  - Aburaia, Ali
A1  - Schwaiger, Simon
A1  - Novotny, Georg
A1  - Aburaia, Mohamed
A1  - Kubinger, Wilfried
T1  - Evaluierung von Navigationsmethoden für mobile Roboter
JF  - e & i Elektrotechnik und Informationstechnik
KW  - Robotics
KW  - Machine Learning
KW  - Industry 4.0
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Kriegler, Andreas
A1  - Wöber, Wilfried
A1  - Aburaia, Mohamed
T1  - Artificial Neural Networks Based Place Categorization
T2  - Digital Conversion on the Way to Industry 4.0
KW  - Artificial Intelligence
Y1  - 
SP  - 201
EP  - 209
PB  - Springer Verlag
ER  - 
TY  - GEN
A1  - Lackner, Maximilian
T1  - PHA - Biopolymere mit Potential
KW  - Bioplastics
KW  - Biopolymers
Y1  - 2020
ER  - 
TY  - JOUR
A1  - Engelhardt-Nowitzki, Corinna
A1  - Aburaia, Mohamed
A1  - Otrebski, Richard
A1  - Rauer, Johannes
A1  - Orsolits, Horst
T1  - Research-based teaching in Digital Manufacturing and Robotics – the Digital Factory at the UAS Technikum Wien as a Case Example
JF  - Procedia Manufacturing
KW  - Digital Factory
KW  - Virtual Reality
KW  - Robotics
KW  - Machine Learning
Y1  - 2020
IS  - Volume 45
SP  - 164
EP  - 170
ER  - 
TY  - JOUR
A1  - Aburaia, Mohamed
A1  - Bucher, Christoph
A1  - Lackner, Maximilian
A1  - Gonzalez-Gutierrez, Joamin
A1  - Zhang, Haiguang
A1  - Lammer, Herfried
T1  - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament
JF  - Biomaterials and Medical Applications
KW  - Filament
KW  - Production
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Felber, Stefan Otto
A1  - Aburaia, Mohamed
A1  - Wöber, Wilfried
A1  - Lackner, Maximilian
T1  - Parameter Optimization for the 3D Print of Thermo-Plastic Pellets with an Industrial Robot
T2  - Digital Conversion on the Way to Industry 4.0
KW  - Thermo Plastics
KW  - Industrial Robot
Y1  - 
SP  - 236
EP  - 247
ER  - 
TY  - JOUR
A1  - Rauer, Johannes
A1  - Aburaia, Mohamed
A1  - Wöber, Wilfried
T1  - Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Graspin
JF  - Proceedings of Joint Austrian Computer Vision and Robotics Workshop 2020
KW  - Robotics
KW  - Neural Networks
Y1  - 2020
SP  - 2
EP  - 3
ER  - 
TY  - JOUR
A1  - Aburaia, Mohamed
A1  - Lackner, Maximilian
A1  - Bucher, Michael
A1  - Gonzalez-Gutierrez, Joamin
A1  - Zhang, Haiguang
A1  - Lammer, Herfried
T1  - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament
JF  - A Production Method for Standardized Continuous Fiber Reinforced FFF Filament,” vol. 4, no. 1, p. 12, 2020
KW  - Production
KW  - Fiber
KW  - FFF
KW  - Filament
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Werner, Jan
A1  - Aburaia, Mohamed
A1  - Raschendorfera, A
A1  - Lackner, Maximilian
T1  - MeshSlicer: A 3D-Printing software for printing 3D-models with a 6-axis industrial robot
T2  - 14th CIRP, Gulf of Naples, Italy, 2020
KW  - 3D
KW  - robot
KW  - Printing
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Rauer, Johannes
A1  - Aburaia, Mohamed
A1  - Wöber, Wilfried
T1  - Semi-Automatic Generation of Training Data for Neural Networks for 6D Pose Estimation and Robotic Grasping
T2  - Austrian Robotics Workshop 2020
KW  - Semi-Automatic
KW  - Neural Network
KW  - Robotic
KW  - Grasping
KW  - 6D
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Aburaia, Mohamed
A1  - Lackner, Maximilian
T1  - Parameter Optimization for the 3D Print of Thermo-plastic Pellets with an Industrial Robot
T2  - International Symposium for Production Research 2020, Turkey
KW  - 3D
KW  - Optimization
KW  - Print
KW  - Industrial
KW  - Robot
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Kainrath, Martin
A1  - Aburaia, Mohamed
A1  - Lackner, Maximilian
T1  - Accuracy Improvement and Process Flow Adaption for Robot Machining
T2  - International Symposium for Production Research 2020, Turkey
KW  - Robot
KW  - Machining
KW  - Improvement
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Kriegler, Andreas
A1  - Wöber, Wilfried
T1  - Vision-based Docking of a Mobile Robot
T2  - Proceedings of the Joint Austrian Computer Vision and Robotics Workshop 2020
KW  - Automation
KW  - Robotics
Y1  - 
SP  - 6
EP  - 12
ER  - 
TY  - CHAP
A1  - Lackner, Maximilian
T1  - Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production
T2  - Webinar on Biopolymers & Bioplastics, Meetings International,
KW  - Process Engineering
KW  - PHB
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Lackner, Maximilian
A1  - Zangl, Sabine
A1  - Lembacher, Harald
A1  - Rüttinger, Norbert
A1  - Fochler, Claus
T1  - Non-wovens and recycling – An overview, International Conference on Recycling and Waste Water Management
T2  - International Conference on Recycling and Waste Water Management
KW  - Environment
KW  - Sustainability
KW  - Recycling
Y1  - 2020
ER  - 
TY  - GEN
A1  - Rohatsch, Lukas
T1  - Open Data im Unterricht
KW  - Open Data
KW  - Open Government Data
KW  - Smart City Wien
KW  - Softwareentwicklung
KW  - Datenanalyse
Y1  - 2020
ER  - 
TY  - BOOK
A1  - Lackner, Maximilian
T1  - Digital Conversion on the Way to Industry 4.0, Selected Papers from ISPR 2020
KW  - Engineering
Y1  - 
PB  - Springer E-Book
ER  - 
TY  - CHAP
A1  - Lackner, Maximilian
A1  - Novotny, Florian A.
A1  - Zangl, Sabine
A1  - Lembacher, Harald
T1  - Contribution of waste heat to the anthropogenic greenhouse effect
T2  - 2nd International Conference on Environmental Sustainability and Climate Change”
KW  - Sustainability
KW  - Environment
Y1  - 2020
ER  - 
TY  - BOOK
A1  - Orsolits, Horst
A1  - Lackner, Maximilian
ED  - Lackner, Maximilian
ED  - Orsolits, Horst
T1  - Virtual Reality und Augmented Reality in der Digitalen Produktion
KW  - Virtual Reality
KW  - Production
KW  - Augmented Reality
Y1  - 
SN  - 978-3-658-29009-2
PB  - Springer Gabler
ER  - 
TY  - JOUR
A1  - Zangl, Sabine
A1  - Husetic, Mirza
A1  - Lackner, Maximilian
A1  - Lembacher, Harald
T1  - Sustainability – bringing about a value changes amongst employees
JF  - Techniumscience
KW  - Sustainability
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Tabakovic, Momir
A1  - Otto, Marc-Oliver
A1  - Commerell, Walter
A1  - Csapo, Csilla
A1  - Vermaak, Herman
T1  - Increase industry cooperation in post graduate  education via OpenLab’s and MobileLab’s in South  Africa
T2  - Smart Education and e-Learning 2020
N2  - This  paper  will  present  the  concepts  of  the  EURYDICE  project  funded  by  the Erasmus + program. Within this project the focus on renewable energies with the overall goal to enhance employability. The energy generation landscape in South Africa is undergoing a fundamental transition, as the vision of the energy strategy is 
to  contribute  to  an  affordable  energy  for  all.  This  vision  will  be  supported  by innovative labs and portals which will be developed within this project.  
One  of  the  goals  is  closing  the  gap  between  TVET  (Technical  and  Vocational Education and Training Colleges) studies and diploma study by the definition of industrial  experience  requirements  for  University  of  Technology  (UoT)  diploma students. This leads to an increased preparedness and “studyability” of UoT diploma students. Industrial stakeholders will be integrated into the process. The project will develop an “Industrial Portal” as a working tool.  
To  increase  industry  cooperation  in  post  graduate  education  “OpenLabs”  and “MobileLabs” will be  developed within the project. It is intended that industry brings industrial problems into the “Labs”, which will then be solved by the students.
KW  - Mobile Labs
KW  - Employability
KW  - Renewable Energy
Y1  - 
SP  - 623
EP  - 629
PB  - Springer Verlag
ER  - 
TY  - JOUR
A1  - Lackner, Maximilian
A1  - Ouattara, Ibrahim
A1  - Gharae, Norouz Ali
A1  - Abolhassani, Raymond
T1  - Clean drinking water global scarcity: a review
JF  - Journal of Water Science and Engineering
KW  - Water
KW  - Engineering
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Lackner, Maximilian
T1  - Combination of Devulcanization and Reactive Extrusion for Value-Added Rubber Recycling
T2  - Webinar on Biopolymers & Bioplastics, Meetings International,
KW  - Recycling
Y1  - 2020
ER  - 
TY  - JOUR
A1  - Zangl, Sabine
A1  - Pingitzer, D.
A1  - Lembacher, Harald
A1  - Lackner, Maximilian
T1  - Carbon footprint reduction in households using professional services – example of laundry cleaning
JF  - Pubtexto
KW  - Sustainability
Y1  - 2020
ER  - 
TY  - CHAP
A1  - Wahl, Harald
T1  - The Curriculum Re-Design of an Academic Work-Integrated Computer Science Program
T2  - 28th International Conference on Teaching, Education & Learning (ICTEL),  December 19-20, 2020
KW  - Academic Education
KW  - Computer Science
KW  - Work-Integrated Curriculum
Y1  - 
ER  - 
TY  - CHAP
A1  - Wahl, Harald
A1  - Eckerl, Sabrina
A1  - Mense, Alexander
T1  - Improvements of an Academic Work-Integrated Computer Science Program
T2  - 6th International Conference on Education (ICEDU), Bangkok, Thailand, April 3-5, 2020
KW  - Academic Education
KW  - Work-Integrated Curriculum
KW  - Computer Science
Y1  - 
ER  - 
TY  - JOUR
A1  - Lietze, Stefanie
A1  - Langer, Karin
T1  - Individualität statt Diversität. Ein Plädoyer für einen neuen (alten) Fokus im Umgang mit Studierenden
JF  - Zeitschrift für Diversitätsforschung und -management
KW  - Hochschullehre
KW  - Diversität
KW  - Individualität
Y1  - 
IS  - Jahrgang 5, Ausgabe 2, 2020
SP  - 205
EP  - 209
ER  -