TY  - CHAP
A1  - Rössler, Peter
A1  - Radlbauer, Josef
A1  - Horauer, Martin
A1  - Lukasch, Franz
A1  - Wimmer, Martin
T1  - Entwicklung eines Satellitenmodems
T2  - Tagungsband zum ersten Forschungsforum der österreichischen Fachhochschulen (FFH), 11-12 April, Puch/Salzburg, Austria
KW  - Satellite Modem
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Widhalm, Dominik
A1  - Goeschka, Karl M.
A1  - Kastner, Wolfgang
T1  - SoK: A Taxonomy for Anomaly Detection in Wireless Sensor Networks focused on Node-level Techniques
T2  - Proceedings of 15th International Conference on Availability, Reliability and Security (ARES 2020), 25-28 August 2020, Virtual Event, Ireland
KW  - anomaly detection
KW  - wireless sensor networks
KW  - taxonomy
KW  - node-level anomaly
KW  - computational intelligence
Y1  - 2020
ER  - 
TY  - JOUR
A1  - Votzi, Helmut
A1  - Himmelstoß, Felix
A1  - Ertl, Hans
T1  - Active Hybrid Filter Applied with a Multi-Cell Switch-Mode Power Amplifier
JF  - Power Electronics and Motion Control PEMC 2018, 27-29 August 2018, Budapest, Hungary
KW  - Amplifier
KW  - Hybrid filter
KW  - Linear amplifier
KW  - Switch-mode power amplifier
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Tauner, Stefan
A1  - Widhalm, Dominik
A1  - Horauer, Martin
T1  - Synchronization Approaches for Testing Mixed-Signal SoCs under Real-Time Constraints using On-Chip Capabilities
T2  - Proceedings of the IEEE Austrian Workshop on Microelectronics, Vienna, 28 Sept. 2015
KW  - Embedded Systems
Y1  - 2018
SP  - 36
EP  - 41
ER  - 
TY  - CHAP
A1  - Widhalm, Dominik
A1  - Tauner, Stefan
A1  - Horauer, Martin
T1  - Augmenting Pre-Silicon Simulation by embedding a Scripting Language in a SystemC Environment
T2  - Proceedings of the 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA) 2016
KW  - Embedded Systems
Y1  - 2018
ER  - 
TY  - GEN
A1  - Tauner, Stefan
A1  - Widhalm, Dominik
A1  - Horauer, Martin
T1  - Synchronization Approaches for Testing Mixed-Signal SoCs under Real-Time Constraints using On-Chip Capabilities
KW  - Embedded Systems
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Rössler, Peter
A1  - Zauner, Martin
T1  - Evaluierung eines Esterel-basierenden Hardware/Software Co-Design Flows
T2  - Proceedings of the Austrochip 2007
KW  - Hardware
KW  - Co-Design
Y1  - 2019
SP  - 99
EP  - 106
ER  - 
TY  - JOUR
A1  - Fibich, Christian
A1  - Rössler, Peter
A1  - Tauner, Stefan
A1  - Taucher, Herbert
A1  - Matschnig, Martin
T1  - A Netlist-level Fault-injection Tool for FPGAs
JF  - e & i Elektrotechnik und Informationstechnik: Volume 132, Issue 6 (2015)
KW  - FPGA
KW  - Embedded Systems
KW  - Electronic Engineering
KW  - Information Technology
Y1  - 2019
IS  - e & i Elektrotechnik und Informationstechnik: Volume 132, Issue 6 (2015)
ER  - 
TY  - CHAP
A1  - Giovagnola, Jessica
A1  - Fernandez, Miguel Molina
A1  - Beneder, Roman
A1  - Schmitt, Patrick
A1  - Pegalajar Cuellar, Manuel
A1  - Morales Santos, Diego Pedro
T1  - Multisensor Avionics Architecture for BVLOS Drone Services
T2  - Journal of Physics: Conference Series ; 12th IEEE EASN International Conference EASN2022, Spain, Barcelona, Oct. 18-21, 2022
KW  - Heterogeneous Sensor Fusion
KW  - Multicore Microcontroller
KW  - Artifical Intelligence
KW  - BVLOS Drone Services
Y1  - 
U6  - http://dx.doi.org/10.1088/1742-6596/2526/1/012084
VL  - Volume 2526
ER  - 
TY  - CHAP
A1  - Dziech, Andrzej
A1  - Wassermann, Jakob
A1  - Windisch, Michael
A1  - Baran, Remigiusz
A1  - Zeja, Andrzej
A1  - Bogacki, Piotr
T1  - A New Approach to Enhance Learning Data Sets for Object Classification
T2  - Proceedings of the International Conference on Circuits, Systems, Communications and Computers, Crete, Greece, July 19-22, 2022
KW  - poor dataset quality
KW  - CNN
KW  - SVT
KW  - shape descriptor
KW  - incremental learning
Y1  - 
U6  - http://dx.doi.org/https://doi.org/10.1109/CSCC55931.2022.00024
ER  - 
TY  - CHAP
A1  - Beneder, Roman
A1  - Schmitt, Patrick
A1  - Koernyefalvy, Clemens
T1  - A Model-Based Approach for Remote Development of Embedded Software for Object Avoidance Applications
T2  - 9th IEEE International Conference on Automation, Robotics and Applications ICARA2023, UNITED ARAB EMIRATES, ABU DHABI, Feb. 10-12, 2023
KW  - Object Recognition
KW  - Indoor Object Avoidance
KW  - Real-Time Embedded Software
KW  - Sensor Fusion
KW  - Radar Sensor
Y1  - 
U6  - http://dx.doi.org/10.1109/ICARA56516.2023.10125627
SP  - 351
EP  - 355
ER  - 
TY  - CHAP
A1  - Beneder, Roman
A1  - Schmitt, Patrick
A1  - Koernyefalvy, Clemens
T1  - A Model-Based Approach for Robotics Education with Emphasis on Embedded Systems
T2  - 9th IEEE International Conference on Automation, Robotics and Applications ICARA2023, UNITED ARAB EMIRATES, ABU DHABI, Feb. 10-12, 2023
KW  - Robotics Education
KW  - Embedded Systems Education
KW  - Control Systems
KW  - Embedded Software
Y1  - 
U6  - http://dx.doi.org/https://doi.org/10.1109/ICARA56516.2023.10125977
SP  - 1
EP  - 5
ER  - 
TY  - JOUR
A1  - Himmelstoss, Felix
T1  - Design of State-Space Controllers with the Help of Signal Flow Graphs Shown for a Buck Converter
JF  - WSEAS Transactions on Power Systems, Volume 21, 2022, pp. 421-429
KW  - DC/DC converter
KW  - Buck converter
KW  - modelling
KW  - simulation
KW  - state space controller
Y1  - 
U6  - http://dx.doi.org/10.37394/23202.2022.21.46
VL  - Volume 21
SP  - 421
EP  - 429
ER  - 
TY  - JOUR
A1  - Himmelstoss, Felix
A1  - Votzi, Helmut
T1  - Simple Chargers for a Small DC Micro-Grid for a Home Emergency Power System
JF  - Electricity
KW  - micro-grid
KW  - Buck converter
KW  - Boost converter
KW  - hysteresis control
Y1  - 
U6  - http://dx.doi.org/https://doi.org/10.3390/electricity4030013
VL  - 4
IS  - 3
SP  - 216
EP  - 234
ER  - 
TY  - JOUR
A1  - Himmelstoss, Felix
T1  - Quasi Resonant Zero Current Switching Modified Boost Converter (QRZCSMBC)
JF  - WSEAS Transactions on Power Systems
KW  - DC/DC converter
KW  - modified boost converter
KW  - inrush current
KW  - zero current switching ZCS
KW  - simulation
Y1  - 
U6  - http://dx.doi.org/10.37394/23201.2023.22.8
VL  - Volume 22
SP  - 55
EP  - 62
ER  - 
TY  - JOUR
A1  - Himmelstoss, Felix
T1  - Third order converters with current output for driving LEDs
JF  - WSEAS Transactions on Power Systems
KW  - DC/DC converters
KW  - current output
KW  - limited duty cycle converter
KW  - simulation
KW  - modeling
Y1  - 
U6  - http://dx.doi.org/10.37394/232016.2022.17.40
VL  - Volume 17
SP  - 402
EP  - 409
ER  - 
TY  - CHAP
A1  - Himmelstoss, Felix
A1  - Windisch, Michael
T1  - A capacitor-free driving stage for light emitting diodes
T2  - 21th International Conference on Renewable Energies and Power Quality (ICREPQ’23) Madrid (Spain), 24th to 26th May 2023
N2  - Electrolytic capacitors have the disadvantage of
pronounced aging. Non-electrolytic capacitors are therefore used
in applications where long-life is important. In this paper we
present a driving stage for LEDs without any capacitive
elements. The basic topology is a Buck converter with one coil,
one active, and one passive switch. Instead of the output
capacitor, series connections of one or more LEDs and an active
switch are connected. An additional diode is connected between
the output and the input to achieve a current path, when all LED-
paths are off. A nonlinear hysteresis controller is used to achieve
a robust control. A system with three switchable LED-strings is
analyzed. Design hints are given and the function is proved with
the help of LTSpice simulations. The system can be used for
lighting purposes with the possibility to change the chrominance.
The potentiality to transmit data is also treated.
KW  - DC-to-DC converter
KW  - stray inductance
KW  - recuperation
KW  - active snubber
Y1  - 
U6  - http://dx.doi.org/10.24084/repqj21.278
VL  - Vol. 21
SP  - 220
EP  - 225
ER  - 
TY  - CHAP
A1  - Himmelstoss, Felix
A1  - Windisch, Michael
T1  - Tapped inductor Boost with exploitation of the stray energy
T2  - Proceedings of 2022 IEEE 20th International Power Electronics and Motion Control Conference (PEMC 2022), Brasov, Rumania, Sep. 25-29
N2  - Tapped inductor DC-to-DC converters are interesting circuits, the winding ratio of the two windings mounted on the same core change the voltage transformation ratio compared to the untapped inductor. The tapped inductor converters are especially useful, when high or low voltage transformation ratios have to be realized. The disadvantage of this concept is that the coupling between the two windings is not total and can be described by the stray or leakage inductance. This stray inductance leads to a high overvoltage at the active switch, and therefore also across other elements of the converter. After a short summery of the ideal tapped Boost converter, the design of an RCD snubber which limits the overvoltage is explained. To improve the efficiency of the converter two active snubber networks are treated, which feed the energy stored in the snubber capacitor into the input source or into the output circuit. Simulations are used to prove these considerations.
KW  - DC/DC converter
KW  - stray inductance
KW  - recuperation
KW  - active snubber
Y1  - 
U6  - http://dx.doi.org/10.1109/PEMC51159.2022.9962849
SP  - 75
EP  - 80
ER  - 
TY  - CHAP
A1  - Himmelstoss, Felix
A1  - Votzi, Helmut
T1  - Two-Stage Step-up Converter with Different Voltage Transformation Ratios depending on the Duty Cycle
T2  - 20th International Conference on Renewable Energies and Power Quality (ICREPQ’22) Vigo (Spain), 27th to 29th July 2022
N2  - A two-stage converter with high output voltage
ratio and reduced current stress of the inductors and partly
reduced voltage stress is discussed. The function is explained
with the help of voltage and current diagrams. The voltage
transformation ratio changes between a quadratic step-up for
duty cycles lower 0.5 and a double Boost converter for duty
cycles higher than 0.5. Dimensioning hints, the control law for
feed-forward controls, the transient when the supply is turned on
is discussed and some simulations are given. A comparison to
other two-stage converters is also treated.
KW  - Quadratic boost
KW  - double boost converter
KW  - feed-forward control
KW  - start-up
Y1  - 
U6  - http://dx.doi.org/10.24084/repqj20.218
VL  - Vol. 20
SP  - 66
ER  - 
TY  - CHAP
A1  - Himmelstoss, Felix
A1  - Hofschweiger, Andreas
A1  - Votzi, Helmut
T1  - Quadratic Combined Forward-Flyback Converter
T2  - Power Conversion and Intelligent Motion Conference (PCIM) 2023, May 9-11, 2023 Nurenberg, Germany
KW  - DC/DC converter
KW  - quadratic converter
KW  - forward
KW  - flyback
Y1  - 
U6  - http://dx.doi.org/10.30420/566091315
SP  - 1446
EP  - 1453
ER  -