TY - BOOK A1 - Schmid, Judith A1 - Wagner, Daniela T1 - Unternehmerische Grundhaltung im Design Thinking - Eine Chance für den Tourismus? KW - Design KW - Entrepreneurship Y1 - PB - Springer ER - TY - JOUR A1 - Urbauer, Philipp T1 - The Social Platform: Profiling FHIR to Support Community-Dwelling Older Adults JF - Journal of Medical Systems KW - Elderly People KW - eHealth KW - Residential Care KW - Integrated Care KW - FHIR Y1 - VL - 4 IS - 43 ER - TY - CHAP A1 - Dolezal, Dominik A1 - Pohn, Birgit A1 - Legenstein, Michael A1 - Polanz, Jacob A1 - Schuh, Roman T1 - System Engineering and Prototypical Setup of an Integrated Laboratory Data Platform in the Field of eHealth T2 - 23rd International Conference Information Visualisation (IV) KW - eHealth KW - knowledge management KW - data management KW - laboratory KW - infrastructure Y1 - 2019 ER - TY - JOUR A1 - Kialka, Filip A1 - Stickler, Benjamin A1 - Hornberger, Klaus A1 - Fein, Yaakov A1 - Geyer, Philipp A1 - Mairhofer, Lukas A1 - Gerlich, Stefan A1 - Arndt, Markus T1 - Concepts for long-baseline, high-mass matter-wave interferometry JF - Physica Scripta N2 - Designing experiments which delocalize ever more complex and more massive particles requires a quantitative assessment of new interferometer configurations. Here, we introduce a figure of merit which quantifies the difference between a genuine quantum interference pattern and a classical shadow and use it to compare a number of near-field interferometer schemes. This allows us to identify the most promising setups for future tests of the quantum superposition principle, and to discuss the perspectives of interferometry with complex molecules and clusters. KW - Matter wave optics KW - Quantum optics in phase space KW - Meteorology Y1 - IS - 94, 2019 ER - TY - JOUR A1 - Kuba, Markus A1 - Panholzer, Alois T1 - A Note on Harmonic number identities, Stirling series and multiple zeta values JF - International Journal of Number Theory KW - Multiple zeta values KW - Harmonic numbers KW - Arakawa–Kaneko zeta function KW - Stirling series Y1 - 2020 VL - 15 IS - 07 SP - 1323 EP - 1348 ER - TY - JOUR A1 - Kuba, Markus A1 - Panholzer, Alois T1 - Stirling permutations containing a single pattern of length three JF - The Australasian Journal of Combinatorics KW - Stirling permutations Y1 - 2020 VL - 74 IS - 2 SP - 216 EP - 239 ER - TY - CHAP A1 - Dolezal, Dominik A1 - Posekany, Alexandra A1 - Koppensteiner, Gottfried A1 - Vittori, Lisa T1 - We can learn ourselves - Developing digital media for Student-Centered Learning T2 - 22th International Conference on Interactive KW - learning office KW - engineering education KW - person-centered approach KW - student-centered classrooms KW - 21st century skills Y1 - 2020 ER - TY - JOUR A1 - Quartinello, Felice A1 - Tallian, Claudia A1 - Auer, Julia A1 - Schön, Herta A1 - Vielnascher, Robert A1 - Weinberger, Simone A1 - Wieland, Karin A1 - Weihs, Anna A1 - Rollett, Alexandra A1 - Lendl, Bernhard A1 - Teuschl, Andreas A1 - Pellis, Alessandro A1 - Gübitz, Georg T1 - Smart Textiles in Wound Care: Functionalization of Cotton/PET Blends with Antimicrobial Nanocapsules JF - Journal of Materials Chemistry B KW - Smart textiles KW - Tissue Engineering KW - Regenerative Medicine KW - Antimicrobial KW - Wound Y1 - 2019 ER - TY - JOUR A1 - Feichtinger, Xaver A1 - Monforte, Xavier A1 - Keibl, Claudia A1 - Hercher, David A1 - Schanda, Jakob A1 - Teuschl, Andreas A1 - Muschitz, Christian A1 - Redl, Heinz A1 - Fialka, Christian A1 - Mittermayr, Rainer T1 - Substantial Biomechanical Improvement by Extracorporeal Shockwave Therapy After Surgical Repair of Rodent Chronic Rotator Cuff Tears. JF - American Journal of Sports Medicine KW - Shockwave Therapy KW - Tissue Engineering KW - Regeneration KW - Surgery Y1 - ER - TY - JOUR A1 - Teuschl, Andreas A1 - Tangl, Stefan A1 - Heimel, Patrick A1 - Schwarze, Uwe Yacine A1 - Monforte, Xavier A1 - Redl, Heinz A1 - Nau, Thomas T1 - Osteointegration of a Novel Silk Fiber-Based ACL Scaffold by Formation of a Ligament-Bone Interface. JF - American Journal of Sports Medicine KW - Tissue Engineering KW - Silk KW - Scaffold KW - ACL Y1 - ER - TY - JOUR A1 - Simsa, Robin A1 - Monforte, Xavier A1 - Salzer, Elias A1 - Teuschl, Andreas A1 - Jenndahl, Lachmi A1 - Bergh, Niklas A1 - Fogelstrand, Per T1 - Effect of fluid dynamics on decellularization efficacy and mechanical properties of blood vessels. JF - PLoS One KW - Tissue Engineering KW - Decellularization KW - Blood Vessel Y1 - ER - TY - CHAP A1 - Rössler, Peter A1 - Höller, Roland A1 - Reisner, Christopher A1 - Maischberger, Oliver T1 - Survey and Comparison of Digital Logic Simulators T2 - Proceedings of 27th Austrochip Conference on Microelectronics, Oct. 24, 2019, Vienna, Austria KW - Digital Logic Simulation KW - Verification KW - Electronic Design Automation KW - VLSI Design KW - Survey Y1 - 2020 ER - TY - CHAP A1 - Höller, Roland A1 - Haselberger, Dominic A1 - Ballek, Dominik A1 - Rössler, Peter T1 - Open-Source RISC-V Processor IP Cores for FPGAs – Overview and Evaluation T2 - 8th Mediterranean Conference on Embedded Computing (MECO), co-sponsored by IEEE, June 10-14, 2019, Budva, Montenegro KW - Field-Programmable Gate Array KW - PSoC KW - CPU Core KW - Open-Source KW - RISC-V Y1 - 2019 ER - TY - CHAP A1 - Wenzl, Matthias A1 - Rössler, Peter A1 - Puhm, Andreas T1 - Checking Application-level Properties Using Assertion Synthesis T2 - Proceedings of the ASME/IEEE International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 18-21, 2019, Anaheim, CA, USA KW - Assertion-based Verification KW - PSL KW - Assertion Synthesis KW - Fault Detection KW - FPGA Y1 - 2019 ER - TY - CHAP A1 - Rössler, Peter A1 - Höller, Roland T1 - Innovative Plattformen für Elektronische Systeme (INES) T2 - Proceedings of the FFH (Forschungsforum der Östereichischen Fachhochschulen), April 24-25, 2019, Wiener Neustadt, Austria KW - FPGA KW - Field-Programmable Gate Array KW - PLD KW - Programmable Logic Device KW - Electronic Based Systems Y1 - 2019 ER - TY - GEN A1 - Pucher, Robert T1 - PHYSIK UND PARAPSYCHOLOGIE – UNÜBERBRÜCKBARE GEGENSÄTZE, ODER NICHT? Können parapsychische Phänomene und moderne Wissenschaften koexistieren? KW - Parapsychology KW - Wissenschaft Y1 - 2019 ER - TY - JOUR A1 - Bernsteiner, Clemens A1 - Miernicki, Martin T1 - SEPA-Lastschrift und Valutaverhältnis. Zivilrechtliche Fragen von Erstattung und Widerruf JF - BankArchiv – Zeitschrift für das Gesamte Bank- und Börsewesen (ÖBA) KW - Reimbursement KW - Banking KW - Monetary Transaction Y1 - 2019 VL - 19 IS - 6 SP - 411 EP - 419 ER - TY - CHAP A1 - Otrebski, Richard A1 - Pospisil, Dominik A1 - Engelhardt-Nowitzki, Corinna A1 - Kryvinska, Natalia A1 - Aburaia, Mohamed T1 - Flexibility Enhancements in Digital Manufacturing by means of Ontological Data Modeling T2 - The 14th International Conference on Future Networks and Communications (FNC) August 19-21, 2019, Halifax, Canada N2 - Cyberphysical production systems are an important part of today’s manufacturing process. The ever-growing need of highly optimized, i.e. at the same time flexible and e� cient systems, requires the use of not only appropriate machines, but as well a communication framework and data model that is manufacturer independent and scalable. This paper proposes a communicationframework based on OPC UA that employs an agent-based architecture. The proposed system has been implemented and tested in the Digital Factory of the UAS Technikum Wien. It shows promising behavior within distributed manufacturing systems. KW - Digital Manufacturing KW - Data Modeling KW - Communication Modeling Y1 - ER - TY - CHAP A1 - Markis, Alexandra A1 - Papa, Maximilian A1 - Kaselautzke, David A1 - Rathmair, Michael A1 - Sattinger, Vinzenz A1 - Brandstötter, Mathias T1 - Safety of Mobile Robot Systems in Industrial Applications T2 - Proceedings of the Joint ARW & OAGM Workshop 2019 KW - Robotics KW - Sensor Technology Y1 - ER - TY - CHAP A1 - Hübl, Stefan A1 - Peppoloni, Mauro A1 - Leonhartsberger, Kurt A1 - Hirschl, Alexander T1 - Assessment of the Impact of a Low-Rise Flat Roofed Building on Ambient Wind Conditions T2 - Wind Energy Exploitation in Urban Environment KW - Wind Energy KW - Wind Conditions KW - Roof Y1 - PB - Springer CY - Trento ER - TY - CHAP A1 - Hirschl, Alexander A1 - Peppoloni, Mauro A1 - Leonhartsberger, Kurt T1 - Evaluation of the Causes of Vibration and Oscillation in a Vertical Axis Small Wind Turbine (VASWT) and Its Reduction T2 - Wind Energy Exploitation in Urban Environment KW - Wind Energy Y1 - PB - Springer CY - Trento ER - TY - BOOK A1 - Eder, Gabriele C. A1 - Maul, Lukas A1 - Illich, Peter A1 - Folkerts, Wiep T1 - Report IEA-PVPS T15-05: 2018BIPV research teams & BIPV R&D facilities KW - Photovoltaics KW - Mapping KW - Solar Power Y1 - SN - 978-3-906042-74-9 ER - TY - CHAP A1 - Hirschl, Alexander A1 - Stortecky, Sebastian A1 - Schidler, Susanne A1 - Leonhartsberger, Kurt T1 - Umweltbilanz gebäudemontierter Kleinwindkraftanlagen T2 - 11. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2019 KW - Small Wind Plant KW - Wind Power Y1 - ER - TY - CHAP A1 - Robert, Pucher T1 - A NEW APPROACH IN COMPUTER SCIENCE EDUCATION TO ENSURE OPTIMAL EMPLOYABILITY OF GRADUATES AD TO REDUCE DROPOUTS T2 - Proceedings of the INTED2019. 13th annual International Technology, Education and Development Conference Valencia (Spain) - 11th, 12th and 13th of March, 2019. KW - Computer Science KW - Curriculum Y1 - 2019 ER - TY - JOUR A1 - Wenzl, Matthias A1 - Merzdovnik, Georg A1 - Weippl, Edgar T1 - ISaFe - Injecting Security Features into Constrained Embedded Firmware JF - ERCIM News KW - Binary rewriting KW - Binary Hardening KW - Embedded Systems KW - Embedded Firmware Y1 - 2019 VL - 2019 IS - 119 (2019) SP - 25 EP - 26 ER - TY - CHAP A1 - Billmann, Maurice A1 - Werner, Stefan A1 - Höller, Roland A1 - Praus, Friedrich A1 - Puhm, Andreas A1 - Kerö, Nikolaus T1 - Open-Source Crypto IP Cores for FPGAs - Overview and Evaluation T2 - Proceedings of 27th Austrochip Conference on Microelectronics, Oct. 24, 2019, Vienna, Austria KW - open-source cryptography IP cores KW - FPGA KW - advanced encryption standard KW - secure hash algorithm KW - physically unclonable function Y1 - 2020 ER - TY - GEN A1 - Deinhofer, Martin A1 - Sabic, Alija A1 - Praus, Friedrich T1 - Unterstützungstechnologien in Smart Homes: kostengünstig & praxisnah KW - Smart Homes KW - Ambient Assistive Technologies Y1 - 2019 ER - TY - JOUR A1 - Kerö, Nikolaus A1 - Puhm, Andreas A1 - Kernen, Thomas A1 - Mroczkowski, Anton T1 - Performance and Reliability Aspects of Clock Synchronization Techniques for Industrial Automation JF - Proceedings of the IEEE KW - Precision Time Protocol KW - PTP KW - IEEE 1588 KW - Reliable KW - Clock Synchronization Y1 - 2019 VL - Vol. 107 IS - No. 6 SP - 1011 EP - 1026 ER - TY - JOUR A1 - Klaus, Benjamin A1 - Aigner, Benjamin A1 - Veigl, Christoph T1 - AsTeRICS Grid – a flexible web-based application for Alternative Communication (AAC), environmental and computer control JF - Technology and Disability KW - AAC KW - Environmental Control KW - Human-Computer Interface Y1 - 2019 VL - Vol. 31 IS - No. s1 SP - 143 EP - 144 ER - TY - JOUR A1 - Wenzl, Matthias A1 - Merzdovnik, Georg A1 - Ullrich, Johann A1 - Weippl, Edgar T1 - From Hack to Elaborate Technique - A Survey on Binary Rewriting JF - ACM Computing Surveys (CSUR) KW - Binary rewriting KW - Binary Hardening KW - Dynamic Rewriting KW - Reassembly KW - Static Rewriting Y1 - 2019 VL - Volume 52 IS - Number 3 (2019) SP - 49:1 EP - 49:37 ER - TY - BOOK A1 - Pucher, Robert A1 - Seibert-Giller, Verena T1 - UXQCC CPUE - FL Exam Preparation: 111 Exam Practice Questions and Extended Glossary KW - Usability KW - Prüfungsvorbereitung KW - UX Design Y1 - 2019 SN - 978-3-9504772-2-1 PB - UX KnowHow Klosterneuburg CY - Klosterneuburg ER - TY - CHAP A1 - Dolezal, Dominik A1 - Posekany, Alexandra A1 - Vittori, Lisa A1 - Koppensteiner, Gottfried A1 - Motschnig, Renate T1 - Fostering 21st Century Skills in Student-Centered Engineering Education at the Secondary School Level: Second Evaluation of The Learning Office T2 - 2019 IEEE Frontiers in Education Conference (FIE) KW - learning office KW - engineering education KW - person-centered approach KW - student-centered classrooms KW - 21st century skills Y1 - 2020 ER - TY - GEN A1 - Dolezal, Dominik A1 - Posekany, Alexander A1 - Schuller, Tamara T1 - Neue Entwicklungen im "Learning Office" (SEK II) KW - learning office KW - engineering education KW - person-centered approach KW - student-centered classrooms Y1 - 2020 ER - TY - BOOK A1 - Robert, Pucher A1 - Seibert-Giller, Verena T1 - Usability und User Experience: Prüfungsvorbereitung zum Certified Professional for Usability Engineering and User Experience Design KW - Usability KW - Prüfungsvorbereitung KW - UX Design Y1 - 2019 SN - 978-3-9504772-0-7 PB - UX KnowHow Klosterneuburg CY - Klosterneuburg ER - TY - GEN A1 - Dolezal, Dominik A1 - Schuller, Tamara T1 - Lernen im Aufbruch: Schüler*innenzentrierter Unterricht im Lernbüro KW - learning office KW - person-centered learning KW - student-centered classrooms KW - engineering education Y1 - 2019 ER - TY - CHAP A1 - Pucher, Robert T1 - A CURRICULUM IN SOFTWARE ENGINEERING OPTIMIZED FOR STUDENTS WHO WORK T2 - Proceedings of the Seventeenth International Conference on Developing Real-Life Learning Experiences (DRLE 2019), May 30th - 31st , 2019 at King Mongkut's Institute of Technology KW - Computer Science KW - Curriculum Y1 - 2019 ER - TY - GEN A1 - Pucher, Robert T1 - A NEW APPROACH IN COMPUTER SCIENCE EDUCATION TO ENSURE OPTIMAL EMPLOYABILITY OF GRADUATES AD TO REDUCE DROPOUTS KW - Computer Science KW - Curriculum Y1 - 2019 ER - TY - GEN A1 - Pucher, Robert T1 - A CURRICULUM IN SOFTWARE ENGINEERING OPTIMIZED FOR STUDENTS WHO WORK KW - Computer Science KW - Curriculum Y1 - 2019 ER - TY - GEN A1 - Pucher, Robert T1 - How Real People Use Voice User Interfaces KW - User Experience Y1 - 2019 ER - TY - JOUR A1 - Sabbatini, Giuliana A1 - Kastner, Johann T1 - Forschung & Entwicklung an Fachhochschulen in Österreich: Leistung und Erfolgsgeschichte trotz herausfordernder Rahmenbedingungen? JF - e & i Elektrotechnik und Informationstechnik KW - Universities of Applied Sciences KW - Research Y1 - 2020 ER - TY - JOUR A1 - Lanickova, Katerina T1 - The use of graded readers in ELT JF - Independence KW - English Teaching Y1 - IS - 77 SP - 22 EP - 24 ER - TY - BOOK A1 - Wala, Thomas A1 - Fröhlich, Dominik T1 - Wissen schaffen für Ingenieure: Der Wegweiser durch deine Masterarbeit KW - Teaching Y1 - PB - Amazon Media CY - Luxemburg ER - TY - JOUR A1 - Bernsteiner, Clemens T1 - Wenn der Nachwuchs viel zu früh kommt: „Papa-Monat“ im Ausnahmezustand JF - ecolex KW - Maternity leave Y1 - VL - 2019 IS - 6 SP - 533 EP - 536 ER - TY - JOUR A1 - Bernsteiner, Clemens A1 - Miernicki, Martin T1 - SEPA-Lastschrift und Valutaverhältnis – Zivilrechtliche Fragen von Erstattung und Widerruf JF - BankArchiv (ÖBA) KW - Payment Y1 - VL - 2019 SP - 411 EP - 419 ET - 6 ER - TY - CHAP A1 - Wala, Thomas A1 - Schmid, Judith ED - Achinger, Regina ED - Gaisch, Martina T1 - Bewegungsförderung im Betrieb durch Active Workplace Design T2 - Coming Soon. The Future of Work, Education and Living KW - Active Workplace Y1 - 2019 VL - 2019 CY - Linz ER - TY - JOUR A1 - Wala, Thomas A1 - Felleitner, Katharina T1 - Praxisbezug der Hochschullehre – dargestellt am Beispiel des österreichischen Fachhochschul-Sektors JF - HM KW - Teaching Y1 - VL - 2019 IS - 1 SP - 8 ff ER - TY - CHAP A1 - Bernsteiner, Clemens ED - Kirchmayr-Schliesselberger, Sabine ED - Klas, Wolfgang ED - Miernicki, Martin ED - Rinderle-Ma, Stefanie ED - Weilinger, Arthur T1 - Kryptowährungen und Gewerberecht T2 - Kryptowährungen KW - Currency Y1 - SP - 463 EP - 487 ER - TY - BOOK A1 - Wala, Thomas A1 - Baumüller, Josef A1 - Krimmel, Kathrin T1 - Buchhaltung, Bilanzierung und Steuern KW - Accounting Y1 - VL - 2019 PB - Verlag Österreich CY - Wien ER - TY - JOUR A1 - Wala, Thomas A1 - Patscheider, Herwig T1 - Modularisierung von Fachhochschul-Studiengängen JF - zfhr KW - Curricula Y1 - VL - 2019 IS - 3 SP - 79 ff ER - TY - JOUR A1 - Wala, Thomas T1 - Die betriebswirtschaftliche Klausur: Investitionsrechnung JF - WISU KW - Investitionsrechnung Y1 - 2020 IS - 10 SP - 1122 ff ER - TY - JOUR A1 - Wala, Thomas T1 - Die betriebswirtschaftliche Klausur: Rechnungswesen JF - WISU KW - Accounting Y1 - VL - 2019 IS - 3 SP - 322 ff ER - TY - BOOK A1 - Lehner, Martin T1 - Didaktik KW - Didactics Y1 - PB - utb ER - TY - JOUR A1 - Wala, Thomas T1 - Move it! Fitness im Büro mit Active Workplace Design JF - ASoK KW - Active Workplace Y1 - VL - 2019 IS - 5 SP - 186 ff ER - TY - JOUR A1 - Wala, Thomas T1 - Die betriebswirtschaftliche Klausur: Unternehmensführung JF - WISU KW - Management Y1 - VL - 2019 SP - 933 ff EP - 8 ER - TY - BOOK A1 - Wala, Thomas T1 - Klausurtraining Accounting & Finance KW - Accounting & Finance Y1 - N1 - https://bookboon.com/de/klausurtraining-accounting-finance-ebook PB - Bookboon CY - London ER - TY - JOUR A1 - Schneider, Simon A1 - Bartlmä, Nadja A1 - Leibold, Jens A1 - Schöfmann, Petra A1 - Tabakovic, Momir A1 - Zelger, Thomas T1 - New Assessment Method for Buildings and Districts towards "Net Zero Energy Buildings" Compatible with the Energy Scenario 2050 JF - REAL CORP 2019 KW - Renewable Energies KW - Buildings Y1 - IS - April 2019 ER - TY - JOUR A1 - Lackner, Maximilian T1 - Industrial Engineering Management – THE key skill for the Digital Age JF - The International Journal of Engineering and Science (THE IJES) KW - Management KW - Industrial Engineering Y1 - ER - TY - THES A1 - Frohner, Matthias T1 - Quality Criteria and Concepts for the Development of Mobile Health Applications KW - mHealth KW - Quality KW - Telemonitoring KW - Communication Standards KW - Validation Y1 - ER - TY - GEN A1 - Sauermann, Stefan T1 - Die Gazelle in der Krankenhaus-IT – neue Wege für die Sicherheitstechnische Kontrolle und Leistungsüberprüfung KW - Krankenhaus IT Y1 - 2020 ER - TY - JOUR A1 - Schneider, Simon A1 - Bartlmä, Nadja A1 - Leibold, Jens A1 - Schöffmann, Petra A1 - Tabakovic, Momir A1 - Zelger, Thomas T1 - New assessment method for buildings and districts towards “Net Zero Energy Buildings" compatible with the energy scenario 2050 JF - Corp KW - Energy Technologies KW - Building Y1 - ER - TY - CHAP A1 - Tabakovic, Momir A1 - Schneider, Simon A1 - Leibold, Jens A1 - Zelger, Thomas A1 - Bartlmä, Nadja A1 - Holzer, Peter A1 - Schöffmann, Petra T1 - Way to positive energy districts in Vienna T2 - Mission Innovation Austria KW - Energy Technologies KW - Vienna Y1 - ER - TY - GEN A1 - Sauermann, Stefan T1 - Presentation of successful use of IHE profiles in national strategies (Austria and Switzerland) KW - eHealth Y1 - 2020 ER - TY - GEN A1 - Sauermann, Stefan T1 - Interoperabilität von Prozessen und IT-Systemen im Gesundheitswesen KW - QM und Digitalisierung KW - Interoperabilität Y1 - 2020 ER - TY - GEN A1 - Sauermann, Stefan T1 - Forum Spital für Manager 2019 - Digitalisierung im Krankenhaus - Vorsitzender KW - eHealth KW - Digitalisierung im Krankenhaus Y1 - 2020 ER - TY - CHAP A1 - Tabakovic, Momir T1 - Development and Implementation of BIPV Courseware for Higher Education and Professionals T2 - Smart Education and e-Learning KW - Education KW - E-Learning Y1 - PB - Springer ER - TY - GEN A1 - Sauermann, Stefan T1 - Data and Integrated Health Care: � Potential and Challenges of IT innovation KW - eHealth Y1 - 2020 ER - TY - GEN A1 - Sauermann, Stefan T1 - The potential of multi-stakeholder alignment in diabetes KW - Diabetes Y1 - 2020 ER - TY - GEN A1 - Sauermann, Stefan T1 - IHE Education & IHE Internationales KW - Health Interoperability KW - eHealth Y1 - 2020 ER - TY - JOUR A1 - Markl, Erich A1 - Lackner, Maximilian A1 - Schmid, Judith A1 - Faast, Thomas T1 - Mutual Benefits from Entrepreneurship of Non-business University Graduates for Academia and Founders JF - International Academic Journal of Entrepreneurship N2 - There is a trend among universities to teach entrepreneurship and support startup initiatives. In this article, the state-ofthe- art in entrepreneurship higher education and university ecosystems of non-business schools is reviewed, and the example of the University of Applied Sciences Technikum Wien, Austria, and one of its startup show cases, Toolsense, is elaborated to understand critical success factors for non-business graduates as founders. The mutual benefits for universities and founders are discussed. In the case of Toolsense and the University of Applied Sciences, narrow band IoT as brought to the University by the startup. Implications on a universities’ innovation and portfolio management are highlighted. Concerning startups, the importance of growth financing after initial success is elaborated. KW - Entrepreneurship KW - Incubator KW - Startup-Business Y1 - ER - TY - CHAP A1 - Gonzalez-Gutierrez, Joamin A1 - Treitler, Manuel A1 - Spoerk, Martin A1 - Arbeiter, Florian A1 - Schuschnigg, Stephan A1 - Lammer, Herfried A1 - Lackner, Maximilian A1 - Aburaia, Mohamed A1 - Poszvek, Günther A1 - Zhang, Haiguang A1 - Sapkota, Janak A1 - Holzer, Clemes T1 - Carbon fiber reinforced thermoplastics for material extrusion additive manufacturing T2 - Conference proceedings of 35th International Conference of the Polymer Processing Society N2 - In an effort to broaden the engineering applications of material extrusion based additive manufacturing (MEAM), new materials are being developed. Adding carbon-fibers (CF) has been one strategy to increase the mechanical performance of different thermoplastics. One challenge is to determine the amount of CF needed to increase the mechanical performance without affecting the “printability” of the compounds. In this paper, different amounts (10, 15, and 20 vol.%) of CF were added to recycled polypropylene (rPP) and polyamide 12 (PA12). A compatibilizer was used for rPP, but not for PA12. Filaments for MEAM were extruded from the different compounds and the viscosity as well as the tensile properties were measured and compared to the processed polymeric matrices. It was observed that the viscosities at the angular frequencies relevant for MEAM (100 to 200 rad/s) were not significantly different for rPP+CF compounds, but it was higher for PA12+CF compounds. As expected, the elongation at break significantly decreased with the addition of CF for all compounds. For the composites with an rPP matrix, the Young’s modulus and the ultimate tensile strength (UTS) continuously increased as the CF content increased to 20 vol.%. For PA12-based materials, the Young’s modulus and the UTS increased with CF content, but adding more than 15 vol.% did not further improve these values. Therefore, it was concluded that for PA12 the maximum amount of CF that should be added was 15 vol.%. Using scanning electron microscopy, it was observed that the CF were homogeneously dispersed in the rPP matrix, but not so well in the PA12 matrix, with fibers being more concentrated towards the rim of the filament. Finally, filaments of rPP, rPP+20CF, PA12 and PA12+15CF were used to print complex geometries by means of MEAM, and it was observed that CF helped to reduce the warpage compared to the unfilled filaments. A potential application of this phenomenon could be the reduction of the bed temperature to develop a more energy efficient MEAM process for semi-crystalline polymers. KW - Additive Manufacturing KW - Materials Y1 - ER - TY - CHAP A1 - Lackner, Maximilian A1 - Markl, Erich A1 - Cermak, Corinna T1 - Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail T2 - Transportation Systems Analysis and Assessment N2 - This review article summarizes the state of the art in energy efficiency (EE) management in air and rail cargo transportation. After an introduction, explanations and definitions follow around the topic of energy efficiency. The political framework conditions of the European Union (EU) as well as the associated European Union Emissions Trading System are described. In particular, the drive technologies, CO2 emissions, and fuel-saving options are reviewed. KW - Energy KW - Cargo Y1 - 2020 ER - TY - CHAP A1 - Cermak, Corinna A1 - Markl, Erich A1 - Lackner, Maximilian T1 - Energy Efficiency Management: State of the Art and Improvement Potential Analysis with Regard to Cargo Transport by Air and Rail T2 - Transportation KW - Transportation KW - Analysis KW - Energy Efficiency Y1 - PB - Intech Open ER - TY - CHAP A1 - Rauer, Johannes A1 - Wöber, Wilfried A1 - Aburaia, Mohamed T1 - An Autonomous Mobile Handling Robot Using Object Recognition T2 - Proceedings of ARW & OAGM Workshop 2019 KW - Mobile Robotics Y1 - 2020 N1 - https://workshops.aapr.at/wp-content/uploads/2019/05/ARW-OAGM19_06.pdf ER - TY - GEN A1 - Rohatsch, Lukas T1 - Smart City Wien – Digital Solutions & Technologies KW - Smart City Wien KW - Integrative Urban Development – Smart City KW - Digital Solutions & Technologies Y1 - 2020 ER - TY - GEN A1 - Rohatsch, Lukas T1 - Digital Solutions for Smart Cities KW - Smart City KW - Digital Solutions KW - Open Data KW - IoT Y1 - 2019 ER - TY - CHAP A1 - Lietze, Stefanie A1 - Krizek, Gerd Christian A1 - Brezowar, Gabriela ED - Pauschenwein, Jutta ED - Gutounig, Robert T1 - Aufbau und Betrieb eines E-Learning Labors zur Lehrvideoproduktion T2 - Tagungsband KW - Teaching KW - Video KW - Production KW - Elearning Y1 - SN - 978-3-902103-86-4 SP - 56 EP - 62 ER - TY - CHAP A1 - Eckerl, Sabrina A1 - Wahl, Harald A1 - Nimmervoll, Alexander T1 - Establishing a work-integrated bachelor degree program in computer science in Austria T2 - 21st World Conference on Cooperative and Work-Integrated Education (WACE 2019), University of Cincinnati, Ohio, United States, 3-7 August, 2019 KW - Work-Integrated Curriculum KW - Computer Science Education Y1 - SN - 978-0-473-49649-4 SP - 49 EP - 57 ER - TY - CHAP A1 - Wahl, Harald A1 - Mense, Alexander A1 - Eckerl, Sabrina T1 - The Evaluation of the Work-integrated Computer Science Degree Program at the UAS Technikum Wien T2 - Proceedings of the 22nd International Conference on Interactive Collaborative Learning (ICL 2019) KW - Work-integrated Program KW - Dual Academic Education KW - Computer Science Education KW - Curriculum Design Y1 - 2020 SP - 176 EP - 186 ER - TY - GEN A1 - Lietze, Stefanie A1 - Krizek, Gerd Christian A1 - Brezowar, Gabriela A1 - Beck, Stefan T1 - Bridging Diversity KW - Diversity Y1 - ER - TY - JOUR A1 - Rohatsch, Lukas A1 - Wahl, Harald A1 - Wagner, Josef T1 - GREISSLER.PLUS - Moderne Wege zur Sicherung der Nahversorgung in ländlichen Regionen JF - Jahrbuch der Logistikforschung KW - Nahversorgung KW - ländliche Regionen KW - IKT-Plattform Y1 - 2020 VL - 2019 SP - 241 EP - 252 ER - TY - GEN A1 - Pasteka, Richard T1 - International Lecture, University of Trás-os-Montes and Alto Douro, Portugal, "Human Respiratory System Modelling" KW - Biomedical Engineering Y1 - 2020 ER - TY - CHAP A1 - Krizek, Gerd Christian A1 - Lietze, Stefanie A1 - Brezowar, Gabriela T1 - Aufbau und Betrieb eines E-Learning Labors zur Lehrvideoproduktion T2 - Tagungsband 18. E-Learning Tag der FH JOANNEUM 2019 N2 - Der Einsatz von Lernvideos ist aus zeitgemäßer Lehre kaum noch wegzudenken. Um adäquates, fachlich und didaktisch abgestimmtes Lehr-und Lernmaterial mit angemessenem Ressourcenaufwand zu ermöglichen, ist es für Hochschulen und fachliche ExpertInnen ein sinnvoller Weg, selbst Lehrvideos zu produzieren. Dieser Beitrag stellt ein Beispiel guter Praxis im Aufbau und Betrieb eines E-Learning Labors vor. Dabei werden die Infrastruktur und Technik, das Produktions-Prozedere sowie mediendidaktische und rechtliche Aspekte beleuchtet. KW - eLearning KW - teaching KW - video Y1 - 2020 ER - TY - JOUR A1 - Pasteka, Richard A1 - Forjan, Mathias A1 - Sauermann, Stefan A1 - Drauschke, Andreas T1 - Electro-mechanical Lung Simulator Using Polymer and Organic Human Lung Equivalents for Realistic Breathing Simulation JF - Scientific Reports N2 - Simulation models in respiratory research are increasingly used for medical product development and testing, especially because in-vivo models are coupled with a high degree of complexity and ethical concerns. This work introduces a respiratory simulation system, which is bridging the gap between the complex, real anatomical environment and the safe, cost-effective simulation methods. The presented electro-mechanical lung simulator, xPULM, combines in-silico, ex-vivo and mechanical respiratory approaches by realistically replicating an actively breathing human lung. The reproducibility of sinusoidal breathing simulations with xPULM was verified for selected breathing frequencies (10–18 bpm) and tidal volumes (400–600 ml) physiologically occurring during human breathing at rest. Human lung anatomy was modelled using latex bags and primed porcine lungs. High reproducibility of flow and pressure characteristics was shown by evaluating breathing cycles (nTotal = 3273) with highest standard deviation |3σ| for both, simplified lung equivalents (μV˙ = 23.98 ± 1.04 l/min, μP = −0.78 ± 0.63 hPa) and primed porcine lungs (μV˙ = 18.87 ± 2.49 l/min, μP = −21.13 ± 1.47 hPa). The adaptability of the breathing simulation parameters, coupled with the use of porcine lungs salvaged from a slaughterhouse process, represents an advancement towards anatomically and physiologically realistic modelling of human respiration. KW - Breathing Simulation KW - Lung Simulator KW - Biomedical Engineering Y1 - 2020 VL - Vol 9 IS - No. 1 SP - Article number: 19778 ER - TY - GEN A1 - Pasteka, Richard T1 - International Week Turku, "Hands-on learning and research applications" KW - Biomedical Engineering Y1 - 2020 ER - TY - CHAP A1 - Fibich, Christian A1 - Tauner, Stefan A1 - Rössler, Peter A1 - Horauer, Martin A1 - Krapfenbauer, Markus A1 - Linauer, Martin A1 - Matschnig, Martin A1 - Taucher, Herbert T1 - Evaluation of Open-Source Linear Algebra Libraries in Embedded Applications T2 - 8th Mediterranean Conference on Embedded Computing (MECO), co-sponsored by IEEE, June 10-14, 2019, Budva, Montenegro KW - Embedded Systems KW - Basic Linear Algebra Subprograms KW - BLAS KW - Benchmark Y1 - 2019 ER - TY - CHAP A1 - Pasteka, Richard A1 - Santos da Costa, Joao Pedro A1 - Forjan, Mathias T1 - Characteristic Waveforms for Testing of Medical Aerosol Inhalers T2 - 8th European Medical and Biological Engineering Conference N2 - Respiratory diseases are characterised by high prevalence among the European population. Medical aerosol inhalers are the most commonly used means of drug delivery into the human respiratory system. This paper focuses on characteristic waveforms that can be utilised during aerosol deposition studies to simulate conditions of rapid human inhalation. Additionally, an inhalatory waveform based on clinically recorded spirometry data is introduced. Experimental measurements are performed and simulation results mutually compared using the electro-mechanical lung simulator xPULM. The inhalatory waveforms are repeatably simulated with high fidelity in regards to the waveform shape with the lowest value of the Goodness of fit 0.89. Additionally, the measured values for all characteristic inhalatory parameters are simulated with low standard deviation < 1. The differences between the required and measured waveform shapes are small, < 3 L/min and do not influence the overall inhalatory volume. This opens a possibility of utilising the xPULM for medical aerosol inhalers testing. KW - Breathing Simulation KW - Biomedical Engineering Y1 - SP - 240 EP - 246 PB - Springer International Publishing ER - TY - CHAP A1 - Pasteka, Richard A1 - Forjan, Mathias T1 - Changes of particle deposition caused by different breathing patterns during active lung simulation T2 - 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) N2 - Aerosols are an integral part of everyday life and as such are inhaled under various conditions and circumstances. These may vary based on the health and activity status of an individual. The aim of this work is to analyse the particle deposition mechanisms during the simulation of three different breathing patterns using an aerosol representing the PM1 fraction of fine particles. The active electro-mechanical lung simulator xPULM is utilized as a driving force and is combined with a non-invasive direct reading optical aerosol measurement system. Results show differences between the number of deposited particles for the three breathing patterns and for the three typical size ranges of airborne particles. Overall, the presented approach demonstrates the possibility of determining the changes of aerosol uptake based on different breathing patterns using the electro-mechanical lung simulator and laboratory produced aerosols. Further measurement cycles must be performed in order to validate the found interactions and to characterize the major influencing parameters. KW - Biomedical Engineering, Breathing simulation Y1 - ER - TY - CHAP A1 - Fibich, Christian A1 - Horauer, Martin A1 - Obermaisser, Roman T1 - Reliability-Enhanced High-Level Synthesis using Memory Profiling and Fault Injection T2 - 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), Vancouver, BC, Canada, 2019 KW - Circuit faults KW - Reliability engineering KW - Field programmable gate arrays KW - Fault tolerance KW - Fault tolerant systems Y1 - 2019 SP - 1363 EP - 1370 ER - TY - JOUR A1 - Lietze, Stefanie ED - für LehrerInnenbildung, Journal T1 - Teamteaching, Fehler- und Feedbackkultur KW - Teaching KW - Feedback Y1 - VL - 2019 IS - 01/2019 SP - 90 EP - 96 ER - TY - CHAP A1 - Rohatsch, Lukas A1 - Wahl, Harald A1 - Wagner, Josef T1 - GREISSLER.PLUS: Towards a Modern Distribution of Regional Goods in Rural Areas in the Digital Era T2 - Proceedings of the 8th International Conference on Smart Cities and Green ICT Systems KW - Logistic Challenges KW - Supply of Daily Goods KW - ICT Platform KW - Rural Areas Y1 - 2019 SN - 978-989-758-373-5 ER - TY - GEN A1 - Pasteka, Richard T1 - Applications of Biomedical Engineering in Respiratory Care KW - Biomedical Engineering Y1 - ER - TY - CHAP A1 - Pasteka, Richard A1 - Forjan, Mathias T1 - Changes of particle deposition caused by different breathing patterns during active lung simulation T2 - 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2019 KW - Lung Simulation KW - Breathing Simulation KW - Biomedical Engineering Y1 - 2020 SP - 4969 EP - 4972 ER - TY - JOUR A1 - Fibich, Christian A1 - Tauner, Stefan A1 - Rössler, Peter A1 - Horauer, Martin A1 - Matschnig, Martin A1 - Taucher, Herbert T1 - FIJI – Fault InJection Instrumenter JF - EURASIP Journal on Embedded Systems KW - Fault injection KW - FPGA KW - Safety-critical system KW - Verification KW - Electronic design automation Y1 - 2019 VL - 2019 IS - Februar 2019 ER - TY - JOUR A1 - Krizek, Gerd Christian A1 - Hausleitner, Rene A1 - Böhme, Laura A1 - Olaverri-Monreal, Cristina T1 - Empirical Analysis of Safe Distance Calculation by the Stereoscopic Capturing and Processing of Images Through the Tailigator System JF - sensors N2 - Driver disregard for the minimum safety distance increases the probability of rear-end collisions. In order to contribute to active safety on the road, we propose in this work a low-cost Forward Collision Warning system that captures and processes images. Using cameras located in the rear section of a leading vehicle, this system serves the purpose of discouraging tailgating behavior from the vehicle driving behind. We perform in this paper the pertinent field tests to assess system performance, focusing on the calculated distance from the processing of images and the error margins in a straight line, as well as in a curve. Based on the evaluation results, the current version of the Tailigator can be used at speeds up to 50 km per hour without any restrictions. The measurements showed similar characteristics both on the straight line and in the curve. At close distances, between 3 and 5 m, the values deviated from the real value. At average distances, around 10 to 15 m, the Tailigator achieved the best results. From distances higher than 20 m, the deviations increased steadily with the distance. We contribute to the state of the art with an innovative low-cost system to identify tailgating behavior and raise awareness, which works independently of the rear vehicle's communication capabilities or equipment. KW - tailgating KW - stereoscopy Y1 - 2020 ER - TY - CHAP A1 - Himmelstoß, Felix A1 - Votzi, Helmut T1 - Four quadratic DC/DC converters with one low-side switch and a tapped inductor at the input side T2 - Proceedings of IECON 2019, 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, Sep. 14-17, Lisbon Portugal KW - DC/DC Converter KW - Quadratic KW - Tapped Inductor Y1 - 2020 SP - 1774 EP - 1779 ER - TY - JOUR A1 - Teuschl, Andreas A1 - Holnthoner, Wolfgang A1 - Monforte, Xavier T1 - Repopulation of an auricular cartilage scaffold, AuriScaff, perforated with an enzyme combination JF - Acta Biomater. N2 - Biomaterials currently in use for articular cartilage regeneration do not mimic the composition or architecture of hyaline cartilage, leading to the formation of repair tissue with inferior characteristics. In this study we demonstrate the use of "AuriScaff", an enzymatically perforated bovine auricular cartilage scaffold, as a novel biomaterial for repopulation with regenerative cells and for the formation of high-quality hyaline cartilage. AuriScaff features a traversing channel network, generated by selective depletion of elastic fibers, enabling uniform repopulation with therapeutic cells. The complex collagen type II matrix is left intact, as observed by immunohistochemistry, SEM and TEM. The compressive modulus is diminished, but three times higher than in the clinically used collagen type I/III scaffold that served as control. Seeding tests with human articular chondrocytes (hAC) alone and in co-culture with human adipose-derived stromal/stem cells (ASC) confirmed that the network enabled cell migration throughout the scaffold. It also guides collagen alignment along the channels and, due to the generally traverse channel alignment, newly deposited cartilage matrix corresponds with the orientation of collagen within articular cartilage. In an osteochondral plug model, AuriScaff filled the complete defect with compact collagen type II matrix and enabled chondrogenic differentiation inside the channels. Using adult articular chondrocytes from bovine origin (bAC), filling of even deep defects with high-quality hyaline-like cartilage was achieved after 6 weeks in vivo. With its composition and spatial organization, AuriScaff provides an optimal chondrogenic environment for therapeutic cells to treat cartilage defects and is expected to improve long-term outcome by channel-guided repopulation followed by matrix deposition and alignment. STATEMENT OF SIGNIFICANCE: After two decades of tissue engineering for cartilage regeneration, there is still no optimal strategy available to overcome problems such as inconsistent clinical outcome, early and late graft failures. Especially large defects are dependent on biomaterials and their scaffolding, guiding and protective function. Considering the currently used biomaterials, structure and mechanical properties appear to be insufficient to fulfill this task. The novel scaffold developed within this study is the first approach enabling the use of dense cartilage matrix, repopulate it via channels and provide the cells with a compact collagen type II environment. Due to its density, it also provides better mechanical properties than materials currently used in clinics. We therefore think, that the auricular cartilage scaffold (AuriScaff) has a high potential to improve future cartilage regeneration approaches. KW - Auricular cartilage KW - Cartilage Regeneration KW - Human adipose derived stromal/stem cells KW - Tissue Engineering KW - Decellularization Y1 - 2020 VL - 2019 IS - Mar/86 SP - 207 EP - 222 ER - TY - CHAP A1 - Wöber, Wilfried A1 - Tibihika, Papius D A1 - Olaverri-Monreal, Cristina A1 - Mehnen, Lars A1 - Sykacek, Peter A1 - Meimberg, Harald T1 - Comparison of Unsupervised Learning Methods for Natural Image Processing T2 - Biodiversity Information Science and Standards KW - Machine Learning KW - Deep Learning KW - Image Processing Y1 - IS - 3 ER - TY - CHAP A1 - Himmelstoß, Felix A1 - Jungmayer, Michael T1 - Zero-Current-Switching Buck Converter T2 - Proceedings of 2019 International Conference on Electrical Drives & Power Electronics (EDPE), Novy Smokovec, Slovakia, 24-26 Sept. 2019 KW - DC/DC Converter KW - Zero Current Switching KW - Resonance Converter Y1 - 2020 SP - 36 EP - 41 ER - TY - JOUR A1 - Nürnberger, Sylvia A1 - Schneider, Cornelia A1 - van Osch, Gerjo A1 - Keibl, Claudia A1 - Rieder, Bernhard A1 - Monforte, Xavier A1 - Teuschl, Andreas A1 - Mühleder, Severin A1 - Holnthoner, Wolfgang A1 - Schädl, Barbara A1 - Gahleitner, Christoph A1 - Redl, Heinz A1 - Wolbank, Susanne T1 - Repopulation of an auricular cartilage scaffold, AuriScaff, perforated with an enzyme combination. JF - Acta Biomaterialia KW - Tissue Engineering KW - Decellularization KW - Cartilage Y1 - ER - TY - CHAP A1 - Wöber, Wilfried A1 - Aburaia, Mohamed A1 - Olaverri-Monreal, Cristina T1 - Classification of Streetsigns Using Gaussian Process Latent Variable Models T2 - 2019 IEEE International Conference on Connected Vehicles and Expo (ICCVE), Graz, Austria KW - Streetsigns KW - Gaussian KW - Vehicles Y1 - 2020 ER - TY - JOUR A1 - Holnthoner, Wolfgang T1 - Adipose-tissue-derived therapeutic cells in their natural environment as an autologous cell therapy strategy: the microtissue-stromal vascular fraction JF - Eur Cell Mater. N2 - The prerequisite for a successful clinical use of autologous adipose-tissue-derived cells is the highest possible regenerative potential of the applied cell population, the stromal vascular fraction (SVF). Current isolation methods depend on high enzyme concentration, lysis buffer, long incubation steps and mechanical stress, resulting in single cell dissociation. The aim of the study was to limit cell manipulation and obtain a derivative comprising therapeutic cells (microtissue-SVF) without dissociation from their natural extracellular matrix, by employing a gentle good manufacturing practice (GMP)-grade isolation. The microtissue-SVF yielded larger numbers of viable cells as compared to the improved standard-SVF, both with low enzyme concentration and minimal dead cell content. It comprised stromal tissue compounds (collagen, glycosaminoglycans, fibroblasts), capillaries and vessel structures (CD31+, smooth muscle actin+). A broad range of cell types was identified by surface-marker characterisation, including mesenchymal, haematopoietic, pericytic, blood and lymphatic vascular and epithelial cells. Subpopulations such as supra-adventitial adipose-derived stromal/stem cells and endothelial progenitor cells were significantly more abundant in the microtissue-SVF, corroborated by significantly higher potency for angiogenic tube-like structure formation in vitro. The microtissue-SVF showed the characteristic phenotype and tri-lineage mesenchymal differentiation potential in vitro and an immunomodulatory and pro-angiogenic secretome. In vivo implantation of the microtissue-SVF combined with fat demonstrated successful graft integration in nude mice. The present study demonstrated a fast and gentle isolation by minor manipulation of liposuction material, achieving a therapeutically relevant cell population with high vascularisation potential and immunomodulatory properties still embedded in a fraction of its original matrix. KW - Adipose-tissue KW - autologous cell therapy KW - microtissue KW - stromal vascular fraction KW - vascularization Y1 - 2020 VL - 2019 IS - Feb, 37 SP - 113 EP - 133 ER - TY - JOUR A1 - Sattinger, Vinzenz A1 - Papa, Maximilian A1 - Stuja, Kemajl A1 - Kubinger, Wilfried T1 - Methodik zur Entwicklung sicherer kollaborativer Produktionssysteme im Rahmen von Industrie 4.0 JF - e & i Elektrotechnik und Informationstechnik KW - Robotics KW - Industry 4.0 Y1 - ER - TY - JOUR A1 - Heimel, Patrick A1 - Swiadek, Nicole V. A1 - Slezak, Paul A1 - Kerbl, Markus A1 - Schneider, Cornelia A1 - Nürnberger, Sylvia A1 - Redl, Heinz A1 - Teuschl, Andreas A1 - Hercher, David T1 - Iodine-Enhanced Micro-CT Imaging of Soft Tissue on the Example of Peripheral Nerve Regeneration JF - Contrast Media & Molecular Imaging KW - µCT KW - Imaging KW - Tissue Engineering KW - Tissue Regeneration Y1 - ER - TY - CHAP A1 - Himmelstoß, Felix A1 - Edelmoser, Karl T1 - Zero-Current-Switching Boost Converter, Power Conversion and Intelligent Motion T2 - Proceedings of PCIM 2019, Nuernberg, Germany, May 7-9, 2019 KW - Discontinuous Conduction Mode KW - DC/DC Converter KW - Resonant Converter KW - ZCS KW - DCM Y1 - 2019 SN - 978-3-8007-4938-6 SP - 1686 EP - 1691 ER - TY - CHAP A1 - Himmelstoß, Felix A1 - Votzi, Helmut T1 - A family of quadratic DC/DC converters with one low-side switch and a tapped inductor at the output side T2 - Aegean Conference on Electrical Machines and Power Electronics & Optimization of Electrical & Electronic Equipment Conference, Istanbul Turkey, August, 27 – 29, 2019 KW - DC/DC Converter KW - Tapped Inductor Y1 - 2019 ER -