2022/2023
Refine
Document Type
- Article (43)
- Lecture (31)
- Conference Proceeding (24)
- Report (2)
- Doctoral Thesis (1)
Keywords
- DC/DC converter (9)
- astrophysics (9)
- ChatGPT (5)
- simulation (5)
- modeling (4)
- Secure Services (3)
- eHealth & Mobility (3)
- Buck converter (2)
- Didaktik (2)
- FPGA (2)
- UVF Imaging (2)
- Ultraviolet Fluorescence (2)
- Virtual Reality (2)
- active snubber (2)
- aging tests (2)
- convection (2)
- eHealth (2)
- education (2)
- extracellular matrix (2)
- fibrin (2)
- methane (2)
- methane emission (2)
- modified boost converter (2)
- recuperation (2)
- stars: evolution (2)
- stars: interiors (2)
- stray inductance (2)
- tissue engineering (2)
- turbulence (2)
- AC-Switch (1)
- Alterungstest (1)
- Artifical Intelligence (1)
- Automation (1)
- BVLOS Drone Services (1)
- Barrierefreiheit (1)
- Bell-Ungleichungen (1)
- Bondi´s mass-loss formula (1)
- Boost converter (1)
- Calibration (1)
- Control Systems (1)
- Controlling (1)
- Corporate (1)
- DC-grid (1)
- DC-to-DC converter (1)
- DC/DC Converter (1)
- DC/DC converters (1)
- DC/DC-Konverter (1)
- Design Reuse (1)
- Digestibility (1)
- Digitalisierung (1)
- EMC (1)
- EPR (1)
- Education (1)
- Embedded Software (1)
- Embedded Systems Education (1)
- Energy Cells (1)
- Energy Communities (1)
- Equality (1)
- Ethernet (1)
- Experimente (1)
- Fault Injection (1)
- Gender-Stereotype (1)
- Healthcare (1)
- Heterogeneous Sensor Fusion (1)
- Hochschuldidaktik (1)
- Hochschule (1)
- Hochsetzer (1)
- IP Core (1)
- IT-Security (1)
- Increasing trees (1)
- Indoor Object Avoidance (1)
- Inklusion (1)
- Integral (1)
- Interconnect Fault (1)
- Internationalized Teaching (1)
- Interoperability (1)
- Intraocular Lenses (1)
- Kostenmanagement (1)
- LED supply (1)
- Learning management systems (1)
- Lebendauerbestimmung (1)
- Lentilactobacillus buchneri (1)
- Lernvideos (1)
- Life Science Engineering (1)
- MVZs (1)
- Mathematik (1)
- Medical Training (1)
- Mobility as a Service (1)
- Moodle (1)
- Multicamera (1)
- Multicore Microcontroller (1)
- Multispectral (1)
- Nachhaltigkeit (1)
- Native MS (1)
- Number theory (1)
- OCT (1)
- Object Recognition (1)
- Online symptom checkers (1)
- Open Data (1)
- Open Source (1)
- Phishing (1)
- Processes (1)
- Protein complex structure (1)
- Prototyp (1)
- Quadratic boost (1)
- Quantencomputer (1)
- Quanteninformation (1)
- Quantenkryptographie (1)
- Quantenphysik (1)
- Quantentechnologien (1)
- Radar Sensor (1)
- Real-Time Embedded Software (1)
- Renewable energy (1)
- Robotics Education (1)
- SPI (1)
- Schreibwerkstatt (1)
- Self-consumption (1)
- Sensor Fusion (1)
- Simulation (1)
- Spacial Planning (1)
- Start-ups (1)
- Student-Centered Learning Environments (1)
- Teaching (1)
- Technologiemanagement (1)
- Tiefsetzer (1)
- Toll-like receptor 3 (1)
- Unternehmensführung (1)
- Verschränkung (1)
- Vicia ervilia (1)
- Virtual Environment (1)
- Virtual and Remote Labs and Classrooms (1)
- Weiterbildung (1)
- X-ray (1)
- YouTube (1)
- ZCS (1)
- accelerated aging tests (1)
- aging (1)
- antioxidant (1)
- aortic valve disease (1)
- artificial immune system (1)
- artificial intelligence (1)
- automatic classification (1)
- betula platyphylla (1)
- biglycan (1)
- biomaterial (1)
- bioreactor (1)
- birch pollen allergy (1)
- blood parameters (1)
- bone marrow stromal cells (1)
- bone tissue engineering (1)
- byproduct (1)
- capacitor charging (1)
- carcass characteristics (1)
- chinese population (1)
- cinnamon essential oil (1)
- control (1)
- coronavirus disease (1)
- current control (1)
- current output (1)
- disinfection (1)
- double boost converter (1)
- dynamical horizons (1)
- eLearning (1)
- economics of science (1)
- efficiency (1)
- egg traits (1)
- endochondral (1)
- essential oil (1)
- evaluation effects (1)
- extra-curricular offerings (1)
- fatty acid profile (1)
- fault detection (1)
- feed restriction (1)
- feed-forward control (1)
- flyback (1)
- forward (1)
- full-thickness macular hole (1)
- gas production (1)
- greenhouse gas (1)
- greenhouse gas (GHG) (1)
- hypertrophy (1)
- hysteresis control (1)
- iPSCs (1)
- immune mechanism (1)
- incentives (1)
- inkludierende Sprache (1)
- inrush current (1)
- intercultural teaching (1)
- intermodale Reisen (1)
- interpretation (1)
- intramembranous (1)
- lavender (1)
- learning analytics (1)
- learning management systems (1)
- lemon seed essential oil (1)
- light emitting diode (1)
- lighting (1)
- limited duty cycle converter (1)
- loss reduction (1)
- major allergen (1)
- mesenchymal stromal cells (1)
- micro-grid (1)
- microwave (1)
- mobile Pflege (1)
- modelling (1)
- monensin sodium (1)
- multilabelled trees (1)
- muscle (1)
- node fault (1)
- offspring performance (1)
- ossification (1)
- osteogenesis (1)
- osteogenic differentiation (1)
- pectinesterase (1)
- photonics (1)
- polyolefin materials (1)
- power converter (1)
- power loss of PV modules (1)
- pulse power (1)
- pulsed power (1)
- quadratic converter (1)
- quantum mechanics (1)
- quasilocal (1)
- regeneration (1)
- research funding systems (1)
- retinal segmentation (1)
- retrofit (1)
- roasting (1)
- ruminal microorganism (1)
- ruminants (1)
- sensor node (1)
- sensory evaluation (1)
- service life estimation (1)
- silage (1)
- slaughter age (1)
- spectral measurements (1)
- spot welding (1)
- start-up (1)
- state space controller (1)
- statistical modelling (1)
- steam flaking (1)
- step-up converter (1)
- student collaboration (1)
- switching loss (1)
- teaching analytics (1)
- tensile stress (1)
- texture profile analysis (1)
- tree evolution processes (1)
- uZ‑i-Diagramm (1)
- ultraviolet UV light (1)
- university (1)
- urea (1)
- voltage transformation ratio (1)
- zero current switching ZCS (1)
- Übergewinnsteuer (1)
As IoT systems have increased the number of deployed embedded devices drastically and most of these devices are used in safety or security critical environments, the education of embedded software engineers is more important than ever. A critical part of their education is the development of their intuition for secure and safe software. In this paper 1 1 This research was funded by the city of Vienna (MA-23 call 21, project no. 9). we present an evaluation system used to generate fast and accurate feedback for student submission in, but not limited to, embedded software development courses. The system can be used as a first feedback loop to outline to the students where problems exist in their code and give them the opportunity to analyze and correct their errors. These extra steps ensure that the students can and will be notified early about their mistakes and can search for correct solutions, supporting the student's learning process. We present the implementation of the system and analyze its deployment in a microcontroller software development lecture. This analysis was done by means of surveys of the students and lecturers as well as a statistical analysis of the student submissions. The results show that the students made use of this extra features and even would prefer to have this feedback in other software development lectures as well.
The healthcare sector is growing in importance as people continue to age and pandemics complicate the boundary conditions of such systems. The number of innovative approaches to solve singular tasks and problems in this area is only slowly increasing. This is particularly evident when looking at medical technology planning, medical training and process simulation. In this paper a concept for versatile digital improvements to these problems by using state of the art development methods of Virtual Reality (VR) and Augmented Reality (AR) are presented. The programming and design of the software is done with the help of Unity Engine, which provides an open interface for docking with the developed framework for future work. The solutions were tested under domain specific environments and have shown good results and positive feedback.
MS SPIDOC is a novel sample delivery system designed for single (isolated) particle imaging at X-ray Free-Electron Lasers
that is adaptable towards most large-scale facility beamlines. Biological samples can range from small proteins to MDa
particles. Following nano-electrospray ionization, ionic samples can be m/z-filtered and structurally separated before being
oriented at the interaction zone. Here, we present the simulation package developed alongside this prototype. The first part
describes how the front-to-end ion trajectory simulations have been conducted. Highlighted is a quadrant lens; a simple but
efficient device that steers the ion beam within the vicinity of the strong DC orientation field in the interaction zone to ensure
spatial overlap with the X-rays. The second part focuses on protein orientation and discusses its potential with respect to
diffractive imaging methods. Last, coherent diffractive imaging of prototypical T = 1 and T = 3 norovirus capsids is shown.
We use realistic experimental parameters from the SPB/SFX instrument at the European XFEL to demonstrate that low-
resolution diffractive imaging data (q < 0.3 nm −1 ) can be collected with only a few X-ray pulses. Such low-resolution data
are sufficient to distinguish between both symmetries of the capsids, allowing to probe low abundant species in a beam if
MS SPIDOC is used as sample delivery.
Background
Online symptom checkers are digital health solutions that provide a differential diagnosis based on a user’s symptoms. During the coronavirus disease 2019 (COVID-19) pandemic, symptom checkers have become increasingly important due to physical distance constraints and reduced access to in-person medical consultations. Furthermore, various symptom checkers specialised in the assessment of COVID-19 infection have been produced.
Objectives
Assess the correlation between COVID-19 risk assessments from an online symptom checker and current trends in COVID-19 infections. Analyse whether those correlations are reflective of various country-wise quality of life measures. Lastly, determine whether the trends found in symptom checker assessments predict or lag relative to those of the COVID-19 infections.
Materials and methods
In this study, we compile the outcomes of COVID-19 risk assessments provided by the symptom checker Symptoma (www.symptoma.com) in 18 countries with suitably large user bases. We analyse this dataset’s spatial and temporal features compared to the number of newly confirmed COVID-19 cases published by the respective countries.
Results
We find an average correlation of 0.342 between the number of Symptoma users assessed to have a high risk of a COVID-19 infection and the official COVID-19 infection numbers. Further, we show a significant relationship between that correlation and the self-reported health of a country. Lastly, we find that the symptom checker is, on average, ahead (median +3 days) of the official infection numbers for most countries.
Conclusion
We show that online symptom checkers can capture the national-level trends in coronavirus infections. As such, they provide a valuable and unique information source in policymaking against pandemics, unrestricted by conventional resources.
Tapped inductor DC-to-DC converters are interesting circuits, the winding ratio of the two windings mounted on the same core change the voltage transformation ratio compared to the untapped inductor. The tapped inductor converters are especially useful, when high or low voltage transformation ratios have to be realized. The disadvantage of this concept is that the coupling between the two windings is not total and can be described by the stray or leakage inductance. This stray inductance leads to a high overvoltage at the active switch, and therefore also across other elements of the converter. After a short summery of the ideal tapped Boost converter, the design of an RCD snubber which limits the overvoltage is explained. To improve the efficiency of the converter two active snubber networks are treated, which feed the energy stored in the snubber capacitor into the input source or into the output circuit. Simulations are used to prove these considerations.
Electrolytic capacitors have the disadvantage of
pronounced aging. Non-electrolytic capacitors are therefore used
in applications where long-life is important. In this paper we
present a driving stage for LEDs without any capacitive
elements. The basic topology is a Buck converter with one coil,
one active, and one passive switch. Instead of the output
capacitor, series connections of one or more LEDs and an active
switch are connected. An additional diode is connected between
the output and the input to achieve a current path, when all LED-
paths are off. A nonlinear hysteresis controller is used to achieve
a robust control. A system with three switchable LED-strings is
analyzed. Design hints are given and the function is proved with
the help of LTSpice simulations. The system can be used for
lighting purposes with the possibility to change the chrominance.
The potentiality to transmit data is also treated.
Two-Stage Step-up Converter with Different Voltage Transformation Ratios depending on the Duty Cycle
(2022)
A two-stage converter with high output voltage
ratio and reduced current stress of the inductors and partly
reduced voltage stress is discussed. The function is explained
with the help of voltage and current diagrams. The voltage
transformation ratio changes between a quadratic step-up for
duty cycles lower 0.5 and a double Boost converter for duty
cycles higher than 0.5. Dimensioning hints, the control law for
feed-forward controls, the transient when the supply is turned on
is discussed and some simulations are given. A comparison to
other two-stage converters is also treated.
Technologiemanagement
(2023)
Stellhebel beim Aufbau von Corporate Start-ups. Dargestellt am Start-Up-Projekt „Hallo Sonne“
(2023)
Bucket increasing trees are multilabelled generalizations of increasing trees, where each non-leaf node carries b labels, with a fixed integer. We provide a fundamental result, giving a complete characterization of all families of bucket increasing trees that can be generated by a tree evolution process. We also provide several equivalent properties, complementing and extending earlier results for ordinary increasing trees to bucket trees. Additionally, we state second order results for the number of descendants of label j, again extending earlier results in the literature.
Dieser Beitrag soll interessierten Laien eine Hilfestellung an die Hand geben, ihre Infomaterialien barriereärmer zu gestalten. Einführend erfolgt eine kurze Darstellung der rechtlichen und gesellschaftlichen Situation rund um das Thema Behinderung. Verschiedene Ebenen von Barrieren und Lösungsansätze werden vorgestellt: Organisationale Barrieren von Bildungseinrichtungen werden ebenso wie Barrieren rund um das Bildungsberatungsgespräch adressiert. Der Schwerpunkt liegt bei auf der Gestaltung von Informationsmaterial. Neben einem theoretischen Hintergrund über Lösungsansätze werden praktische Umsetzungen für verschiedene Medien vorgestellt. Der Beitrag wird durch Beispiele guter Praxis in der Umsetzung, eine Checkliste zur Anwendung und weiterführende Ressourcen abgerundet.
Equipping rooms used for medical purposes, like e.g., intensive care units,
is an expensive and time-consuming task. In order to avoid extensive subsequent
adjustments due to inappropriate layout visualization or geometric conditions
difficult to identify in 2D plans, it is of utmost importance to provide an optimal
planning environment to future users such as physicians and nurses. In this paper
we present the concept of a fully automatized pipeline, which is designed to
visualize computer aided design (CAD) data using virtual reality (VR). The
immersive VR experience results in improvement of efficiency in the decision-
making process during the planning phase due to better spatial imagination. The
pipeline was successfully tested with CAD data from existing Intensive Care Units.
The results indicate that the pipeline can be a valuable tool in the field of spatial
planning in healthcare, due to simple usage and fast conversion of CAD data. The
next step will be the development of a plugin for CAD tools to allow for interactions
with the CAD models in Virtual Reality, which is not yet possible without manual
intervention
Design of State-Space Controllers with the Help of Signal Flow Graphs Shown for a Buck Converter
(2022)
A Model-Based Approach for Remote Development of Embedded Software for Object Avoidance Applications
(2023)
Connecting material degradation and power loss of PV modules using advanced statistical methodology
(2023)
Using nylon bag techniques, Cornell net carbohydrates and protein systems (CNCPS), and scanning electron microscopy, the authors examined the digestibility and structure of Vicia ervilia (ervil, bitter vetch) after steam flaking, roasting, and microwave processing. During the in situ technique, the samples were incubated at 0, 2, 4, 6, 8, 12, 16, 24, 36, and 48 h. For the description of the ruminal DM (dry matter) and CP (crude protein) degradation kinetics of treated and untreated Vicia ervilia, different models were selected as the best fit for the dry matter (DM) and crude protein (CP) degradation parameters of steam flaked samples. The results showed that both the steam flaking and microwave treatment samples contained high levels of non-protein nitrogen and buffer soluble protein, respectively. In comparison with steam flaking and microwave treatment, roasting decreased and increased the buffer soluble protein and neutral detergent insoluble protein, respectively. The control treatments showed the highest levels of neutral detergent soluble protein and the lowest levels of acid detergent soluble protein. Moreover, steam flaking and roasting decreased and increased the amount of acid detergent insoluble protein, respectively. When using dry heat (microwave and roasting), the acid detergent soluble and insoluble protein fractions were increased. As a result of this experiment, the nitrogen fractions were altered using heat processing. Hence, protein fermented feed and ruminal fermentation conditions can be expressed using these results.
Greenhouse Gas Emission Reduction Potential of Lavender Meal and Essential Oil for Dairy Cows
(2023)
This research aims to evaluate the potential of lavender meal (LM) and lavender essential oil (LEO) to mitigate methane emissions by dairy cows. Locally grown lavender was collected fresh for this purpose, and its oil was extracted using the cold-press method. The resultant LEO and LM and whole lavender (WL) were added to dairy cow concentrate feed at 0%, 0.05%, and 0.10%, and their effects on vitro gas production values and gas concentrations were subsequently assessed. Out of the 30 bioactive compounds isolated from LEO, linalool and linalyl acetate were the most common—accounting for 70.4% of the total. The lavender dose had a significant influence on gas production for up to 12 h. No significant variations were found across the lavender forms when gas kinetics, in vitro degradability, and predicted energy values were compared. The addition of WL to the concentrate feed of dairy cows produced the greatest quantities of methane, carbon dioxide, and hydrogen sulfide, whereas LEO resulted in the lowest values. In contrast, no significant difference in ammonia content was found across the various lavender forms added into dairy cow concentrate feed. The results of this research suggest that adding 0.05–0.10% LM and LEO to concentrate feed may decrease greenhouse gas emissions from dairy cows.
We explore the different notions of completeness applied in the EPR discussion following and amending the thorough analysis of Arthur Fine. To this aim, we propose a classification scheme for scientific theories that provides a methodology for analyzing the different levels at which interpretive approaches come into play. This allows us to contrast several concepts of completeness that operate on specific levels of the theory. We introduce the notion of theory completeness and compare it with the established notions of Born completeness, Schrödinger completeness and bijective completeness. We relate these notions to the recent concept of ????-completeness and predictable completeness. The paper shows that the EPR argument contains conflicting versions of completeness. The confusion of these notions led to misunderstandings in the EPR debate and hindered its progress. Their clarification will thus contribute to recent debates on interpretational issues of quantum mechanics. Finally, we discuss the connection between the EPR paper and the Einstein–Rosen paper with regard to the question of completeness.
DC/DC-Konverter wandeln eine Eingangsspannung in eine Ausgangsspannung. In diesem Beitrag werden drei solche Konverter behandelt, die aus den drei Grundschaltungen hergeleitet sind. Im Gegensatz zu den Originalstrukturen sind diese nur für einen geringeren Spannungsübersetzungsbereich geeignet, haben aber den Vorteil, dass die elektronischen Schalter immer bei Strom null schalten und die Dioden nicht zwangsweise, sondern immer von selbst ausschalten. Die Gewinnung der Konverterschaltungen wird erläutert, und die Funktionsweisen werden durch mathematische Beschreibung, durch Skizzen und mithilfe des uZ-i-Diagramms erklärt. Weiters werden einige mögliche Erweiterungen der Schaltungen gezeigt.
The use of fault detection and tolerance measures in wireless sensor networks is inevitable to ensure the reliability of the data sources. In this context, immune-inspired concepts offer suitable characteristics for developing lightweight fault detection systems, and previous works have shown promising results. In this article, we provide a literature review of immune-inspired fault detection approaches in sensor networks proposed in the last two decades. We discuss the unique properties of the human immune system and how the found approaches exploit them. With the information from the literature review extended with the findings of our previous works, we discuss the limitations of current approaches and consequent future research directions. We have found that immune-inspired techniques are well suited for lightweight fault detection, but there are still open questions concerning the effective and efficient use of those in sensor networks.
The aim of this study was to investigate the effect of different forms of Lentilactobacillus buchneri on the in vitro methane production, fermentation characteristics, nutritional quality, and aerobic stability of corn silage treated with or without urea. The following treatments were applied prior to ensiling: (1) no urea treatment and LB; (2) no urea treatment+freeze dried LB; (3) no urea treatment+preactivated LB; (4) with urea treatment+no LB; (5) with urea treatment+freeze dried LB; (6) with urea treatment+preactivated. LB was applied at a rate of 3 × 108 cfu/kg on a fresh basis, while urea was applied at a rate of 1% on the basis of dry matter. Data measured at different time points were analyzed according to a completely randomized design, with a 2 × 3 × 5 factorial arrangement of treatments, while the others were analyzed with a 2 × 3 factorial arrangement. Preactivated LB was more effective than freeze-dried LB in reducing silage pH, ammonia nitrogen, cell-wall components, yeast count, and carbon dioxide production, as well as increasing lactic acid and residual water-soluble carbohydrate and aerobic stability (p < 0.0001). A significant reduction in the methane ratio was observed after 24 h and 48 h incubation with preactivated forms of LB (p < 0.001). The results indicated that preactivated LB combined with urea improved fermentation characteristics, nutritional quality, and aerobic stability and reduced the methane ratio of corn silages.
This study aimed to investigate the effects of slaughter age (young vs. old), muscle type (Longissimus dorsi (LD), Gluteus medius (GM)) and fat deposits (kidney knob and channel fat, subcutaneous fat, intramuscular fat) on chemical, organoleptic, textural characteristics and fatty acid composition of Holstein Friesian bull meat. For this purpose, the carcasses of 26 Holstein Friesian bulls that had been fattened on the same private farm were assigned to two experimental groups based on their age at slaughter: a young group (YG) (average age: 17.0 ± 1.0 months old) and an old group (OG) (average age: 22.0 ± 1.0 months old). The percentage of crude protein, panel tenderness score, polyunsaturated fatty acid (PUFA) and saturated fatty acid (SFA) content, the PUFA/SFA ratio and the hypocholesterolemic fatty acid (DFA)/hypercholesterolemic fatty acid (OFA) ratio of the bull carcasses decreased significantly with increasing slaughter age. By contrast, the OFA content of the carcasses significantly increased (p < 0.05) with increasing slaughter age. Advanced slaughter age resulted in lower panel tenderness scores. Additionally, the meat of the bulls in the OG was considered to be less healthy because of the less desirable fatty acid composition and nutritional indices, such as the PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios, compared to the meat from the bulls in the YG. Furthermore, the intramuscular fat and internal fat contained high percentages of PUFA and SFA and high PUFA/SFA and hypocholesterolemic/hypercholesterolemic ratios. Interestingly, the percentage of OFA content in the internal and intramuscular fat tissues decreased with increasing slaughter age. In conclusion, this study provided evidence that slaughter age and muscle and fat type are essential sources of variations in the textural characteristics, sensory panel attributes and fatty acid profile of meat from Holstein Friesian bulls.
The ERA-Net SES project Regional Renewable Energy Cells (R2EC) [1] aims at developing a scalable system for decentralized, interacting ‘energy cells’ with a high concentration of locally generated renewable energy. ‘Energy cells’ are essentially Renewable Energy Communities (ECs) in the European context. The system aims at maximizing the utilization of locally generated renewable energy through Electrical Storage (ES) as well as high-electric applications like e‑heating, Heat Pumps (HPs), and E‑Vehicles (EVs). The system is also designed to interact with other energy cells locally, thus, improving the utilization of locally generated energy.
A variety of different adjacent energy cells in three countries, Austria (AT), Belgium (BE), and Norway (NO), are analyzed, and the results are used for the development of regional and renewable energy cell systems. This approach aims at developing tailor-made solutions that meet the different local and regional requirements and the electrical energy demand of the observed energy cells. A unique opportunity is created, as the three countries are at varying levels of regional development in the field of energy communities, and the regional requirements and conditions differ significantly. A comprehensive investigation of the technical and economic viability of the ECs in the three regions is conducted on a simulation level. The technical simulation results show an increased self-consumption of individual users and the overall cell in all of the observed testbeds, while the economic analysis shows economic benefits at varying levels in each of the observed testbeds. The implemented R2EC system ascertains both technical and economic viability in the observed testbeds.
Methane emission from enteric fermentation in ruminants is the single most relevant greenhouse gas source in agriculture, and it is amongst the largest anthropogenic ones. As ruminants are needed globally for meat, milk and other goods production on a huge scale, feed additives could offer an interesting solution to reduce CH4 emissions. Methane emission strategies are investigated to maintaining productivity and the overall health of the animal. Some strategies have shown to reduce the propagation and/or eliminate ruminal flora affecting the health and productivity of the animal. Therefore, identifying beneficial strategies leads to improving productivity and the health of the animal and environment.
Quail is used in cookery, but mainly for its egg production around the globe, and sustainable poultry farming practices have been searched. The use of colostrum (beestings or first milk from cows) in quails’ diet can play an important role in providing probiotics and reducing the need for antibiotics, which, in addition to better quail performance, is effective in reducing environmental impacts. The results of the current research show that the continuous use of bovine colostrum (BC) in laying quails’ diets has beneficial effects on their performance, egg traits, blood indexes and antioxidant status.
Methane is the main greenhouse gas (GHG) emitted by ruminants. Mitigation strategies are required to alleviate this negative environmental impact while maintaining productivity and ruminants’ health. To date, numerous methane mitigation strategies have been investigated, reported and suggested by scientists to the livestock industry. In this review, the authors will focus on the commonly practiced and available techniques expanding the knowledge of the reader on the advances of methane mitigation strategies with a focus on the recent literature. Furthermore, the authors will attempt to discuss the drawbacks of the strategies in terms of animal health and performance reduction as well as the concept of feed and energy loss, adding an economic perspective to methane emission mitigation which is in the farmers’ direct interest. As a whole, many factors are effective in reducing undesired methane production, but this is definitely a complex challenge. Conclusively, further research is required to offer effective and efficient methane production mitigation solutions in ruminants worldwide, thus positively contributing to climate change.
This study aimed to assess the impact of essential oils (EOs) on in vitro gas formation and the degradability of dairy and beef cattle diets. This study also aimed to investigate the effects of different types of EOs on nutrient utilization and rumen microbial activity. The current study was conducted using a fully randomized design consisting of eight experimental treatments, including two control treatments without any additives, and treatments with cinnamon essential oil (CEO), flaxseed essential oil (FEO), and lemon seed essential oil (LEO) at a concentration of 60 mg/kg fresh mass. Two control treatments were used, one with alfalfa silage and dairy concentrate (DC, CON-DC) and the other with alfalfa silage and fattening concentrate (FC, CON-FC). Gas formation, dry matter (DM) digestibility, crude protein (CP) digestibility, effective degradability (ED), and soluble fractions of DM and organic matter (OM) were evaluated. CEO had a substantial effect on gas formation (p < 0.05). When EOs were added to the diets, they increased dry matter digestibility after 24 h of incubation as compared to control treatments. After 24 h of incubation, FCCEO and FCFEO had the highest CP digestibility among the diets. FCLEO considerably enhanced ED, as well as the soluble fraction of DM (a) at a passage rate of 2% per hour. Treatment with FCCEO resulted in a significant increase in soluble fractions compared to the control diets. At a passage rate of 2% h, DCCEO had the maximum ED value. When EOs were introduced to the diet, they dramatically decreased the insoluble portion of CP (b). Compared to the control treatments, gas production was significantly lower in the presence of LEO (FCLEO; p < 0.05). The addition of EOs to cattle diets may increase nutrient utilization and enhance rumen microbial activity. EOs extracted from lemon seeds (at a dose of 60 mg/kg of diet) lowered gas production in both dairy cattle and fattening diets.
Short-term Incentives of Research Evaluations: Evidence from the UK Research Excellence Framework
(2023)
Cyclic Tensile Stress Induces Skeletal Muscle Hypertrophy and Myonuclear Accretion in a 3D Model
(2023)
Skeletal muscle is highly adaptive to mechanical stress due to its resident stem cells and the pronounced level of myotube plasticity. Herein, we study the adaptation to mechanical stress and its underlying molecular mechanisms in a tissue-engineered skeletal muscle model. We subjected differentiated 3D skeletal muscle-like constructs to cyclic tensile stress using a custom-made bioreactor system, which resulted in immediate activation of stress-related signal transducers (Erk1/2, p38). Cell cycle re-entry, increased proliferation, and onset of myogenesis indicated subsequent myoblast activation. Furthermore, elevated focal adhesion kinase and β-catenin activity in mechanically stressed constructs suggested increased cell adhesion and migration. After 3 days of mechanical stress, gene expression of the fusogenic markers MyoMaker and MyoMixer, myotube diameter, myonuclear accretion, as well as S6 activation, were significantly increased. Our results highlight that we established a promising tool to study sustained adaptation to mechanical stress in healthy, hypertrophic, or regenerating skeletal muscle.
AI Engineering @ FHTW
(2022)
The current shift in teaching and learning away from the physical
classroom to blended and digital learning environments presents many
challenges and opportunities for both teachers and learners. A
somewhat overlooked aspect of this transition concerns the issue of
student collaboration in blended learning situations. Students teaming
up to improve their learning process, exchange ideas and achieve
learning goals has been an integral part of the higher education
experience for many, while also strengthening students social skills.
With the physical distancing and accompanying shift to increased
online learning settings of the past few years, establishing this
collaboration between students has become more and more difficult.
Well-conceived digital social learning spaces and opportunities might
be a way to compensate for these missed out traditional learning
situations with peers in or after class.
Going beyond typical group work activities teachers often utilize in
their classes, Moodle offers a wide variety of opportunities for
teachers to design these digital learning spaces tailored to the
specific needs and objectives of their classes and students. Following
a student-centred learning paradigm and a conception of the teacher as
a designer and enabler of learning opportunities, we want to present a
few use cases of Moodle activities, plugins and integrated tools
suitable for designing these social spaces online. Among others we
would like to showcase possible scenarios for peer assessments, open
video conferencing rooms for students with BigBlueButton,
collaborative test preparation with StudentQuiz, and connecting
learners through a creative usage of the database activity. Picking up
these different resources, we hope to motivate and inspire educators
to design and roll out collaborative online spaces for their students
to enable better teamwork and achieve deeper learning.
Vortrag im Zuge des Security Monats in Form des FHTW Security Potpourri 2022
Learning Management Systems (LMS), such as Moodle, enable the rapid progress of digitisation in teaching, which is no longer only taking place in the lecture hall, but increasingly “online” and asynchronously. New didactic concepts (blended learning, “flipped classroom”) consist of alternating self-learning and face-to-face phases, with the former taking place in the LMS, i.e. online. However, no analysis has yet been carried out as to how students act with the material in the self-learning phase, or the teachers are not provided with any information about the learning progress of the students during the self-learning phase. In this paper, concepts of learning and teaching analytics are presented to answer these questions and to integrate the measures derived from them into the teaching processes in a sustainable manner.
In this paper we present various educational activities with Photonics Explorer, an educational kit developed by the photonics research team B - PHOT at VUB (Vrije Universiteit Brussel) for students at secondary schools. The concept is a ‘lab-in-a-box’ that enables students of the 2 nd and 3 rd grade to do photonics experiments themselves at school with lasers, LEDs, lenses, optical fibers, and other high-tech components. Even though, the kit was developed for the secondary schools, we use experiments from the kit also for some other teaching activities such as lectures at the university, photonics workshops for teachers and children at primary/secondary schools or for events such as children's/youth's university or the night of sciences. In the frame of Austrian based project Phorsch! we have organized most of these activities which will be presented here.
Hochschulen und Studiengänge sprechen Studieninteressierte nicht
bevölkerungsrepräsentativ an. Nach einem kurzen Abriss der aktuellen Lage und
der Diversitätsdimensionen werden anhand einer adaptierten Form der „4R-
Methode“ des Gender-Mainstreamings Kommunikationsarten, -medien und
-ebenen mit Blick auf Kommunizierende und Kontexte beleuchtet. Dieser Beitrag
soll Hochschulen und Studiengängen einen einfachen Leitfaden an die Hand
geben, die eigene Sprache auf den verschiedenen Kommunikationskanälen
kritisch zu reflektieren und inkludierender zu gestalten, um Stereotypisierung zu
vermeiden und alle anzusprechen